Texas Instruments

ADS7817UB - 12-Bit 200kHz SAR ADC | Texas Instruments

MPN: ADS7817UB ✓ Aktif
100mV to 2.5V Vdss 3uA maximum Id 8-pin SOIC Package
MOQ: 1 |

ADS7817UB Ringkasan

The Texas Instruments ADS7817UB is a 12-bit successive-approximation-register analog-to-digital converter with a 200kHz sampling rate, fully differential high-impedance input, and an 8-pin SOIC package. Its reference voltage can vary from 100mV to 2.5V, producing corresponding input-referred resolution between 49uV and 1.22mV. The device also supports low-power automatic power-down, with a maximum power-down current of 3uA.

An SAR ADC is a data-converter architecture that determines each digital output through a sequence of successive approximation decisions. It is generally simpler and lower power than flash, pipeline, or sigma-delta converters when moderate conversion speed and compact analog-to-digital conversion are required. The ADS7817 belongs to the precision ADC category and the broader semiconductor hierarchy of analog-to-digital converters, data-converter ICs, and signal-chain components.

The ADS7817UB combines a 12-bit conversion resolution with a 200kHz maximum sampling rate, making it suitable for sensors, industrial measurement systems, control loops, and embedded data acquisition. Its fully differential input architecture supports a true differential analog signal path, while the selectable reference voltage allows the analog input range to be scaled with the system. The small SOIC-8 package also supports compact analog and embedded boards.

The serial interface reduces the number of external signal connections required for transferring conversion results to a controller. Automatic power-down is useful in intermittent measurement systems because the ADC can reduce its supply consumption when conversions are not continuously required. The manufacturer describes the ADS7817 as a low-power precision ADC, with the reference and differential input arrangement helping match the converter to the signal source rather than requiring a single-ended input stage.

Typical applications include industrial process monitoring, current and voltage sensing, battery and power-system instrumentation, laboratory data acquisition, and embedded sensor interfaces. The 200kHz sampling rate is adequate for many real-time control and measurement loops, while the 12-bit code width supports a practical balance between resolution, speed, power, and conversion cost.

The primary design consideration is input range and reference selection. The ADC input must remain within the range established by the selected reference voltage, and the signal must satisfy the timing and settling requirements for the SAR conversion process. Differential input routing should be symmetric and kept away from noisy digital and switching nodes to preserve signal integrity.

This page combines the ADS7817UB specifications, drop-in replacement candidates, comparison parameters, and application guidance to support component selection and board-level implementation.

Pilihan pengganti yang segera untuk ADS7817UB — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ADS7817UB (sama faktor bentuk dan kaki) — berbeza dalam Architecture, Input-Referred Resolution, Power-Down Current, Reference Voltage Range, Resolution.

Texas Instruments
Architecture: SAR (Successive Approximation Register)
Input-Referred Resolution: 49 uV to 1.22 mV (reference-dependent)
Power-Down Current: <1 mA (automatic power-down mode)
Bandingkan Dengan ADS7817UB →

ADS7816U/2K5

✅ Masuk Drop-In
📦 8-pin SOIC
Parametric equivalent listed for the ADS7817UB/2K5 variant; resolution, reference range, and serial timing require final datasheet confirmation

📋 Alternatif rujukan (tidak dalam katalog)

ADS7817UB/2K5

✅ Masuk Drop-In
📦 8-pin SOIC
Same ADS7817 family and 8-pin SOIC construction, but a 2500-piece ordering configuration rather than the UB configuration

📋 Alternatif rujukan (tidak dalam katalog)

ADS7817UB-BB

✅ Masuk Drop-In
📦 8-pin SOIC
Same ADS7817UB electrical family and 8-pin SOIC configuration, with a distinct -BB ordering suffix

📋 Alternatif rujukan (tidak dalam katalog)

ADS7822UB

✅ Masuk Drop-In
📦 8-pin SOIC
Same-package precision SAR ADC comparison candidate; resolution, input range, and serial timing differ and require circuit-level verification

📋 Alternatif rujukan (tidak dalam katalog)

ADS7817UB Penilaian maksimum & Ciri-ciri Elektrik

Pemecahkatan 12 bit
kadar sampling 200kHz
Architecture Successive approximation register (SAR)
Analog Input 1 fully differential input
Input Impedance High impedance
Reference Voltage Range 100mV to 2.5V
Input-Referred Resolution 49uV to 1.22mV
Power-Down Current 3uA maximum
Power-Down Function Automatic power-down
Output Interface Serial interface
Kemasan 8-pin SOIC
Package Variant Available MSOP-8
Jenis Pemasangan Surface mount
Power Category Micro-power
Input Range Bipolar input range

Panduan Konfigurasi Pin ADS7817UB msop-8

Konfigurasi pin untuk ADS7817UB (msop-8 pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai msop-8 untuk ADS7817UB

Tiada data garisan pin yang diperoleh untuk ADS7817UB.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADS7817UB patut untuk 6 aplikasis: Industrial Process Sensing, Battery-Powered Measurement, Current and Voltage Sensing, Embedded Data Acquisition, Laboratory Instrumentation, Control and Monitoring Loops.

🏭

Industrial Process Sensing

The ADS7817UB suits industrial process sensing because it combines a fully differential input with a 12-bit conversion code and a 200kHz sampling rate. A transmitter or sensor front end can drive the differential input while the reference is scaled across the supported 100mV-to-2.5V range, yielding input-referred resolution from 49uV to 1.22mV. The 8-pin SOIC footprint keeps the converter compact, while automatic power-down can reduce consumption between measurement cycles. Engineers should still verify sensor settling, common-mode limits, isolation requirements, and the timing of the serial transfer.

⚡

Battery-Powered Measurement

The ADS7817UB is appropriate for battery-powered measurement modules that need accurate conversion without a continuous high-power ADC budget. Its micro-power design and automatic power-down capability support intermittent operation, with the manufacturer specifying 3uA maximum power-down current. The 12-bit resolution is useful for current, voltage, and resistance measurements, while the differential input can help reject common-mode disturbances in compact embedded hardware. The system designer should calculate the active conversion duty cycle and confirm supply compatibility before selecting the reference voltage and passive input network.

📊

Current and Voltage Sensing

For current and voltage sensing, the ADS7817UB offers the combination of a fully differential input and 200kHz sampling that helps capture rapidly changing shunt or divider signals. Its 12-bit output provides 4096 codes, and the adjustable reference allows the converter range to be matched more closely to the sensed voltage than a fixed full-scale converter. Place the differential traces as a matched pair and keep switching-regulator and digital timing nodes away from the input path. Calibration and anti-alias filtering remain necessary for accurate field results.

🧩

Embedded Data Acquisition

The ADS7817UB works well in embedded data-acquisition systems where a controller needs periodic analog measurements through a compact serial interface. A 200kHz SAR conversion capability supports responsive acquisition without requiring a large high-speed converter, while the 8-pin SOIC package limits board area. The reference can be selected from 100mV to 2.5V to suit the transducer output, and automatic power-down supports intermittent sampling. Firmware must account for conversion timing, data-ready behavior, input acquisition time, and the chosen serial clock.

🖥️

Laboratory Instrumentation

The ADS7817UB can serve as the analog-to-digital stage in compact laboratory instrumentation where a fully differential input and adjustable reference improve matching to balanced sensor outputs. The 12-bit resolution and 200kHz maximum sampling rate provide a practical combination for many measurement channels without the power demand of a much faster converter. The device should be paired with low-noise references, suitable input filtering, and careful grounding to preserve accuracy. For instruments requiring wider dynamic range or substantially higher resolution, the ADC architecture must be reassessed rather than relying only on package compatibility.

🤖

Control and Monitoring Loops

The ADS7817UB is suitable for feedback monitoring and control loops that need 12-bit measurements at up to 200kHz. The SAR architecture provides a direct digital result through the serial interface, allowing a controller to monitor current, position, supply, or sensor state within a deterministic sampling framework. Differential input operation is valuable when the measured signal is small and susceptible to common-mode noise. Loop design must include conversion latency, anti-alias filtering, input settling time, and software or hardware timing checks so the control algorithm does not react to stale or incompletely acquired samples.

Ringkasan Produk Disebarkan

ADS7816U/2K5 Same-family SAR ADC comparison candidate Dipergunakan di: Industrial Process Sensing, Current and Voltage Sensing, Embedded Data Acquisition, Control and Monitoring Loops ADS7822UB Precision ADC comparison candidate Dipergunakan di: Industrial Process Sensing, Current and Voltage Sensing, Laboratory Instrumentation, Control and Monitoring Loops ADS7817UB/2K5 Same-family ordering option Dipergunakan di: Battery-Powered Measurement, Laboratory Instrumentation ADS7817UB-BB Same-family ordering option Dipergunakan di: Battery-Powered Measurement, Embedded Data Acquisition
What is the ADS7817UB?
The ADS7817UB is a 12-bit, 200kHz sampling analog-to-digital converter with a fully differential input and serial interface. According to the Texas Instruments ADS7817 product information, it uses a successive-approximation-register architecture, accepts a reference voltage from 100mV to 2.5V, and is available in an 8-pin SOIC package. It is designed for compact data-acquisition and embedded measurement systems that require low power and differential input capability.
What is the conversion resolution of ADS7817UB?
The ADS7817UB provides 12-bit resolution, with corresponding input-referred resolution ranging from 49uV to 1.22mV. The manufacturer product information specifies that this range depends on the selected reference voltage, which can vary from 100mV to 2.5V. Designers should use the reference voltage and the actual analog input range together when calculating voltage-per-code and measurement accuracy.
How fast can ADS7817UB sample analog signals?
The ADS7817UB has a maximum sampling rate of 200kHz. According to the Texas Instruments ADS7817 product page, it is a 12-bit SAR converter designed for high-speed conversion while maintaining low power. The 200kHz capability is suitable for many industrial control, sensor acquisition, and embedded signal-monitoring systems, although the source impedance and acquisition timing must be checked against the data-acquisition requirements.
What is the ADS7817UB reference-voltage range?
The ADS7817UB reference voltage can be varied from 100mV to 2.5V. The Texas Instruments product information states that this produces an input-referred resolution between 49uV and 1.22mV. Reference selection determines the useful analog input span, so the signal range, common-mode voltage, and resolution must be evaluated together when designing the front end.
Does ADS7817UB have a differential input?
Yes, the ADS7817UB uses one fully differential analog input. The Texas Instruments product page describes the input as high impedance and suitable for direct connection to suitable differential signal sources. Differential routing helps reject common-mode noise, but the two input paths should be laid out symmetrically and paired with appropriate input-conditioning components.
Where can I download the ADS7817UB datasheet PDF?
The official ADS7817 product and support page is https://www.ti.com/product/ADS7817, where Texas Instruments provides the ADS7817 datasheet and related product information. Use the manufacturer datasheet for the complete electrical characteristics, timing diagrams, pin descriptions, and recommended application circuits. The ADS7817UB orderable package details should be cross-checked against the 8-pin SOIC footprint used on the PCB.
Where can I find the ADS7817UB pinout?
The ADS7817UB pinout is defined in the pin-configuration and pin-description sections of the Texas Instruments ADS7817 datasheet. The target orderable device is packaged in an 8-pin SOIC, so the PCB footprint must provide all eight device connections plus the specified thermal and layout recommendations. Assign tracks only after matching the physical pin numbering and pad orientation shown in the manufacturer package drawing.
What is the best drop-in replacement for ADS7817UB?
The closest drop-in candidate identified in the component cross-reference results is ADS7816U/2K5 from Texas Instruments, offered as a parametric equivalent for the obsolete ADS7817UB/2K5 ordering variant. Because ADS7817UB uses an 8-pin SOIC and a differential SAR conversion architecture, engineers should verify supply voltage, reference range, serial timing, and acquisition-circuit requirements before approving any replacement.
Can ADS7822UB replace ADS7817UB?
ADS7822UB is a potential same-package alternative listed in the ADS7817 comparison results, but it should not be treated as automatically interchangeable. A replacement decision must confirm the 8-pin SOIC pinout, input architecture, reference-voltage range, conversion timing, serial protocol, and acquisition requirements. The cross-reference listing alone does not establish guaranteed drop-in compatibility for every ADS7817UB design.
ADS7817UB vs ADS7822UB: which is better for a precision sensor interface?
ADS7817UB is the stronger candidate when the design specifically requires a 12-bit, 200kHz SAR converter with a fully differential input and a 100mV-to-2.5V reference range. ADS7822UB may be useful when its documented characteristics better match the sensor output and acquisition timing. The decisive factors are differential-input support, serial timing, reference range, and whether the existing PCB footprint matches.
When should I choose ADS7817UB instead of ADS7816U/2K5?
Choose ADS7817UB when the design depends on its documented 12-bit resolution, 200kHz sampling rate, fully differential input, and 100mV-to-2.5V reference range. Choose ADS7816U/2K5 when its verified electrical characteristics and serial timing fit the application and the ADS7817UB is unavailable for supply or lifecycle reasons. Confirm all pin-level and timing details against the relevant manufacturer datasheet before substitution.
Is ADS7817UB suitable for industrial sensor acquisition?
The ADS7817UB is suitable for many industrial sensor-acquisition applications that require a 12-bit differential SAR ADC at up to 200kHz. Its high-impedance fully differential input, low-power operation, automatic power-down, and compact SOIC-8 package suit embedded measurement systems. Sensor excitation, common-mode limits, input settling, isolation, and industrial temperature requirements still need separate verification.
How much power does ADS7817UB use?
The ADS7817UB is a micro-power ADC, and the Texas Instruments product information specifies a maximum power-down current of 3uA. Automatic power-down is especially useful in duty-cycled acquisition systems that are active only while taking measurements. Complete operating-current figures and active conversion power should be taken from the manufacturer datasheet for the exact supply and operating conditions.
Where can I buy ADS7817UB and check its lead time?
Use the Request a Quote form on this page to request ADS7817UB pricing, current availability, and lead time for the exact 8-pin SOIC ordering code. Quote requests should state the required quantity, target date, and whether reels, tubes, or another permitted packing format are acceptable. The same form can be used for production planning and lifecycle-risk review.
What are the key specifications of ADS7817UB that engineers should know?
The key ADS7817UB specifications are 12-bit resolution, a 200kHz sampling rate, one fully differential high-impedance input, and an adjustable 100mV-to-2.5V reference. The device also provides an automatic power-down function with 3uA maximum power-down current, a serial interface, and an 8-pin SOIC package. These characteristics make it appropriate for compact, low-power differential measurement systems.
What can replace ADS7817UB?
ADS7816U/2K5 is the principal replacement candidate identified for the ADS7817UB/2K5 family variant, while ADS7822UB appears in a direct ADS7817 comparison. For ADS7817UB itself, the replacement must match the 8-pin SOIC footprint and preserve the required differential input, reference range, serial timing, and electrical limits. Confirm the exact ordering code and datasheet before committing a substitute.

Data referensi kejuruteraan untuk ADS7817UB — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose ADS7817UB when the design requires a 12-bit, 200kHz SAR ADC with a fully differential high-impedance input and an adjustable 100mV-to-2.5V reference in an 8-pin SOIC footprint. It is particularly suitable for compact industrial sensors, current and voltage measurements, embedded acquisition, and duty-cycled instruments. ADS7816U/2K5 is a candidate when a parametrically related TI SAR ADC is needed, but verify its pinout, timing, and electrical limits before replacement. ADS7817UB/2K5 and ADS7817UB-BB belong to the same ADS7817UB family and are best evaluated for ordering or lifecycle needs. ADS7822UB may fit some precision-measurement designs, but its input, reference, and serial timing must be checked against the existing circuit. No replacement should be approved solely from package similarity.

Perbandingan dengan Gantian

Parametr Produk Ini ADS7816U/2K5 ADS7817UB/2K5 ADS7817UB-BB ADS7822UB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC

Penyeberangsung Jelas

  • Differential precision conversion in a compact 8-pin SOIC (vsADS7822UB)
  • Adjustable reference supports measurement-range scaling (vsADS7816U/2K5)
  • Low-power shutdown supports duty-cycled acquisition (vsADS7822UB)

Catatan Desain

Route the fully differential input as a matched pair with symmetrical geometry and continuous ground reference. Keep switching nodes, high-current return paths, and digital clock traces away from the input network. Component tolerances, input bias current, source impedance, and acquisition timing affect the effective resolution even though the converter provides 12-bit output codes.

Use the automatic power-down capability for intermittent measurement systems and confirm that the controller can tolerate the converter's startup and conversion timing before each sample. Reference and supply bypassing should follow the manufacturer application guidance, with low-capacitance placement close to the relevant device pins. A stable, low-noise reference is particularly important because its variation directly affects both input range and conversion accuracy.

Do not select the reference voltage without checking the differential input common-mode limits and the signal's allowable input range. Serial-interface timing, conversion latency, and data-ready handling must also be implemented correctly. Before adopting a replacement, verify every pin, supply condition, acquisition requirement, and serial timing edge against the relevant manufacturer datasheet rather than relying only on the package drawing.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No specific environmental or material-compliance status was identified for this ordering code. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.

Data disahkan pada: 2026-11-14 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ADS7817UB datasheet ADS7817UB pinout ADS7817UB datasheet pdf ADS7817UB specifications ADS7817UB application circuit ADS7817UB replacement ADS7817UB equivalent ADS7817UB cross reference ADS7817UB vs ADS7822UB ADS7817UB footprint ADS7817UB price ADS7817UB stock Texas Instruments ADS7817UB

Komponen dan Tanda berkaitan

Texas Instruments ADS7817UB ADS7816U/2K5 ADS7817UB/2K5 ADS7817UB-BB ADS7822UB analog-to-digital converter ADC successive approximation register SAR precision ADC differential input input-referred resolution reference voltage automatic power-down serial interface 8-pin SOIC SOIC family surface mount SMD industrial sensor acquisition data acquisition current sensing voltage sensing
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ