ADS7817UB - 12-Bit 200kHz SAR ADC | Texas Instruments
MPN: ADS7817UB ✓ Hoạt độngADS7817UB Tóm tắt
An SAR ADC is a data-converter architecture that determines each digital output through a sequence of successive approximation decisions. It is generally simpler and lower power than flash, pipeline, or sigma-delta converters when moderate conversion speed and compact analog-to-digital conversion are required. The ADS7817 belongs to the precision ADC category and the broader semiconductor hierarchy of analog-to-digital converters, data-converter ICs, and signal-chain components.
The ADS7817UB combines a 12-bit conversion resolution with a 200kHz maximum sampling rate, making it suitable for sensors, industrial measurement systems, control loops, and embedded data acquisition. Its fully differential input architecture supports a true differential analog signal path, while the selectable reference voltage allows the analog input range to be scaled with the system. The small SOIC-8 package also supports compact analog and embedded boards.
The serial interface reduces the number of external signal connections required for transferring conversion results to a controller. Automatic power-down is useful in intermittent measurement systems because the ADC can reduce its supply consumption when conversions are not continuously required. The manufacturer describes the ADS7817 as a low-power precision ADC, with the reference and differential input arrangement helping match the converter to the signal source rather than requiring a single-ended input stage.
Typical applications include industrial process monitoring, current and voltage sensing, battery and power-system instrumentation, laboratory data acquisition, and embedded sensor interfaces. The 200kHz sampling rate is adequate for many real-time control and measurement loops, while the 12-bit code width supports a practical balance between resolution, speed, power, and conversion cost.
The primary design consideration is input range and reference selection. The ADC input must remain within the range established by the selected reference voltage, and the signal must satisfy the timing and settling requirements for the SAR conversion process. Differential input routing should be symmetric and kept away from noisy digital and switching nodes to preserve signal integrity.
This page combines the ADS7817UB specifications, drop-in replacement candidates, comparison parameters, and application guidance to support component selection and board-level implementation.
Bộ thay thế dễ dàng lắp đặt cho ADS7817UB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADS7817UB (cùng hình factor và footprint) — khác nhau ở Architecture, Input-Referred Resolution, Power-Down Current, Reference Voltage Range, Resolution.
ADS7816U/2K5
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS7817UB/2K5
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS7817UB-BB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS7822UB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS7817UB Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 12 bit |
| Tỷ lệ lấy mẫu | 200kHz |
| Architecture | Successive approximation register (SAR) |
| Analog Input | 1 fully differential input |
| Input Impedance | High impedance |
| Reference Voltage Range | 100mV to 2.5V |
| Input-Referred Resolution | 49uV to 1.22mV |
| Power-Down Current | 3uA maximum |
| Power-Down Function | Automatic power-down |
| Output Interface | Serial interface |
| Hộp | 8-pin SOIC |
| Package Variant Available | MSOP-8 |
| Kiểu lắp đặt | Surface mount |
| Power Category | Micro-power |
| Input Range | Bipolar input range |
Hướng dẫn cấu hình chân ADS7817UB msop-8
Cấu hình chân cho ADS7817UB (msop-8 gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho ADS7817UB.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADS7817UB phù hợp cho 6 Áp dụngs: Industrial Process Sensing, Battery-Powered Measurement, Current and Voltage Sensing, Embedded Data Acquisition, Laboratory Instrumentation, Control and Monitoring Loops.
Industrial Process Sensing
The ADS7817UB suits industrial process sensing because it combines a fully differential input with a 12-bit conversion code and a 200kHz sampling rate. A transmitter or sensor front end can drive the differential input while the reference is scaled across the supported 100mV-to-2.5V range, yielding input-referred resolution from 49uV to 1.22mV. The 8-pin SOIC footprint keeps the converter compact, while automatic power-down can reduce consumption between measurement cycles. Engineers should still verify sensor settling, common-mode limits, isolation requirements, and the timing of the serial transfer.
Được đề xuất
Battery-Powered Measurement
The ADS7817UB is appropriate for battery-powered measurement modules that need accurate conversion without a continuous high-power ADC budget. Its micro-power design and automatic power-down capability support intermittent operation, with the manufacturer specifying 3uA maximum power-down current. The 12-bit resolution is useful for current, voltage, and resistance measurements, while the differential input can help reject common-mode disturbances in compact embedded hardware. The system designer should calculate the active conversion duty cycle and confirm supply compatibility before selecting the reference voltage and passive input network.
Được đề xuất
Current and Voltage Sensing
For current and voltage sensing, the ADS7817UB offers the combination of a fully differential input and 200kHz sampling that helps capture rapidly changing shunt or divider signals. Its 12-bit output provides 4096 codes, and the adjustable reference allows the converter range to be matched more closely to the sensed voltage than a fixed full-scale converter. Place the differential traces as a matched pair and keep switching-regulator and digital timing nodes away from the input path. Calibration and anti-alias filtering remain necessary for accurate field results.
Được đề xuất
Embedded Data Acquisition
The ADS7817UB works well in embedded data-acquisition systems where a controller needs periodic analog measurements through a compact serial interface. A 200kHz SAR conversion capability supports responsive acquisition without requiring a large high-speed converter, while the 8-pin SOIC package limits board area. The reference can be selected from 100mV to 2.5V to suit the transducer output, and automatic power-down supports intermittent sampling. Firmware must account for conversion timing, data-ready behavior, input acquisition time, and the chosen serial clock.
Được đề xuất
Laboratory Instrumentation
The ADS7817UB can serve as the analog-to-digital stage in compact laboratory instrumentation where a fully differential input and adjustable reference improve matching to balanced sensor outputs. The 12-bit resolution and 200kHz maximum sampling rate provide a practical combination for many measurement channels without the power demand of a much faster converter. The device should be paired with low-noise references, suitable input filtering, and careful grounding to preserve accuracy. For instruments requiring wider dynamic range or substantially higher resolution, the ADC architecture must be reassessed rather than relying only on package compatibility.
Được đề xuất
Control and Monitoring Loops
The ADS7817UB is suitable for feedback monitoring and control loops that need 12-bit measurements at up to 200kHz. The SAR architecture provides a direct digital result through the serial interface, allowing a controller to monitor current, position, supply, or sensor state within a deterministic sampling framework. Differential input operation is valuable when the measured signal is small and susceptible to common-mode noise. Loop design must include conversion latency, anti-alias filtering, input settling time, and software or hardware timing checks so the control algorithm does not react to stale or incompletely acquired samples.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADS7817UB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADS7816U/2K5 | ADS7817UB/2K5 | ADS7817UB-BB | ADS7822UB |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
Bảo phân biệt quan trọng
- Differential precision conversion in a compact 8-pin SOIC (vsADS7822UB)
- Adjustable reference supports measurement-range scaling (vsADS7816U/2K5)
- Low-power shutdown supports duty-cycled acquisition (vsADS7822UB)
Ghi chú thiết kế
Route the fully differential input as a matched pair with symmetrical geometry and continuous ground reference. Keep switching nodes, high-current return paths, and digital clock traces away from the input network. Component tolerances, input bias current, source impedance, and acquisition timing affect the effective resolution even though the converter provides 12-bit output codes.
Use the automatic power-down capability for intermittent measurement systems and confirm that the controller can tolerate the converter's startup and conversion timing before each sample. Reference and supply bypassing should follow the manufacturer application guidance, with low-capacitance placement close to the relevant device pins. A stable, low-noise reference is particularly important because its variation directly affects both input range and conversion accuracy.
Do not select the reference voltage without checking the differential input common-mode limits and the signal's allowable input range. Serial-interface timing, conversion latency, and data-ready handling must also be implemented correctly. Before adopting a replacement, verify every pin, supply condition, acquisition requirement, and serial timing edge against the relevant manufacturer datasheet rather than relying only on the package drawing.
Thông tin tuân thủ
No specific environmental or material-compliance status was identified for this ordering code. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.