ADS7817UB - 12-Bit 200kHz SAR ADC | Texas Instruments
MPN: ADS7817UB ✓ 啟用中ADS7817UB 概覽
An SAR ADC is a data-converter architecture that determines each digital output through a sequence of successive approximation decisions. It is generally simpler and lower power than flash, pipeline, or sigma-delta converters when moderate conversion speed and compact analog-to-digital conversion are required. The ADS7817 belongs to the precision ADC category and the broader semiconductor hierarchy of analog-to-digital converters, data-converter ICs, and signal-chain components.
The ADS7817UB combines a 12-bit conversion resolution with a 200kHz maximum sampling rate, making it suitable for sensors, industrial measurement systems, control loops, and embedded data acquisition. Its fully differential input architecture supports a true differential analog signal path, while the selectable reference voltage allows the analog input range to be scaled with the system. The small SOIC-8 package also supports compact analog and embedded boards.
The serial interface reduces the number of external signal connections required for transferring conversion results to a controller. Automatic power-down is useful in intermittent measurement systems because the ADC can reduce its supply consumption when conversions are not continuously required. The manufacturer describes the ADS7817 as a low-power precision ADC, with the reference and differential input arrangement helping match the converter to the signal source rather than requiring a single-ended input stage.
Typical applications include industrial process monitoring, current and voltage sensing, battery and power-system instrumentation, laboratory data acquisition, and embedded sensor interfaces. The 200kHz sampling rate is adequate for many real-time control and measurement loops, while the 12-bit code width supports a practical balance between resolution, speed, power, and conversion cost.
The primary design consideration is input range and reference selection. The ADC input must remain within the range established by the selected reference voltage, and the signal must satisfy the timing and settling requirements for the SAR conversion process. Differential input routing should be symmetric and kept away from noisy digital and switching nodes to preserve signal integrity.
This page combines the ADS7817UB specifications, drop-in replacement candidates, comparison parameters, and application guidance to support component selection and board-level implementation.
直接替換替代品,適用於 ADS7817UB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADS7817UB (相同外形與佔位) — 差異在於 Architecture, Input-Referred Resolution, Power-Down Current, Reference Voltage Range, Resolution.
ADS7816U/2K5
✅ 直接替換📋 參考替代品(不在目錄中)
ADS7817UB/2K5
✅ 直接替換📋 參考替代品(不在目錄中)
ADS7817UB-BB
✅ 直接替換📋 參考替代品(不在目錄中)
ADS7822UB
✅ 直接替換📋 參考替代品(不在目錄中)
ADS7817UB 最大額定值與電氣特性
| 解析度 | 12 bit |
| 取樣率 | 200kHz |
| Architecture | Successive approximation register (SAR) |
| Analog Input | 1 fully differential input |
| Input Impedance | High impedance |
| Reference Voltage Range | 100mV to 2.5V |
| Input-Referred Resolution | 49uV to 1.22mV |
| Power-Down Current | 3uA maximum |
| Power-Down Function | Automatic power-down |
| Output Interface | Serial interface |
| 封裝 | 8-pin SOIC |
| Package Variant Available | MSOP-8 |
| 安裝類型 | Surface mount |
| Power Category | Micro-power |
| Input Range | Bipolar input range |
ADS7817UB msop-8 腳位配置指南
ADS7817UB(msop-8 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS7817UB.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS7817UB 適用於 6 應用s: Industrial Process Sensing, Battery-Powered Measurement, Current and Voltage Sensing, Embedded Data Acquisition, Laboratory Instrumentation, Control and Monitoring Loops.
Industrial Process Sensing
The ADS7817UB suits industrial process sensing because it combines a fully differential input with a 12-bit conversion code and a 200kHz sampling rate. A transmitter or sensor front end can drive the differential input while the reference is scaled across the supported 100mV-to-2.5V range, yielding input-referred resolution from 49uV to 1.22mV. The 8-pin SOIC footprint keeps the converter compact, while automatic power-down can reduce consumption between measurement cycles. Engineers should still verify sensor settling, common-mode limits, isolation requirements, and the timing of the serial transfer.
推薦
Battery-Powered Measurement
The ADS7817UB is appropriate for battery-powered measurement modules that need accurate conversion without a continuous high-power ADC budget. Its micro-power design and automatic power-down capability support intermittent operation, with the manufacturer specifying 3uA maximum power-down current. The 12-bit resolution is useful for current, voltage, and resistance measurements, while the differential input can help reject common-mode disturbances in compact embedded hardware. The system designer should calculate the active conversion duty cycle and confirm supply compatibility before selecting the reference voltage and passive input network.
推薦
Current and Voltage Sensing
For current and voltage sensing, the ADS7817UB offers the combination of a fully differential input and 200kHz sampling that helps capture rapidly changing shunt or divider signals. Its 12-bit output provides 4096 codes, and the adjustable reference allows the converter range to be matched more closely to the sensed voltage than a fixed full-scale converter. Place the differential traces as a matched pair and keep switching-regulator and digital timing nodes away from the input path. Calibration and anti-alias filtering remain necessary for accurate field results.
推薦
Embedded Data Acquisition
The ADS7817UB works well in embedded data-acquisition systems where a controller needs periodic analog measurements through a compact serial interface. A 200kHz SAR conversion capability supports responsive acquisition without requiring a large high-speed converter, while the 8-pin SOIC package limits board area. The reference can be selected from 100mV to 2.5V to suit the transducer output, and automatic power-down supports intermittent sampling. Firmware must account for conversion timing, data-ready behavior, input acquisition time, and the chosen serial clock.
推薦
Laboratory Instrumentation
The ADS7817UB can serve as the analog-to-digital stage in compact laboratory instrumentation where a fully differential input and adjustable reference improve matching to balanced sensor outputs. The 12-bit resolution and 200kHz maximum sampling rate provide a practical combination for many measurement channels without the power demand of a much faster converter. The device should be paired with low-noise references, suitable input filtering, and careful grounding to preserve accuracy. For instruments requiring wider dynamic range or substantially higher resolution, the ADC architecture must be reassessed rather than relying only on package compatibility.
推薦
Control and Monitoring Loops
The ADS7817UB is suitable for feedback monitoring and control loops that need 12-bit measurements at up to 200kHz. The SAR architecture provides a direct digital result through the serial interface, allowing a controller to monitor current, position, supply, or sensor state within a deterministic sampling framework. Differential input operation is valuable when the measured signal is small and susceptible to common-mode noise. Loop design must include conversion latency, anti-alias filtering, input settling time, and software or hardware timing checks so the control algorithm does not react to stale or incompletely acquired samples.
推薦
推薦產品摘要
工程參考資料,適用於 ADS7817UB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADS7816U/2K5 | ADS7817UB/2K5 | ADS7817UB-BB | ADS7822UB |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
主要差異化特點
- Differential precision conversion in a compact 8-pin SOIC (對比ADS7822UB)
- Adjustable reference supports measurement-range scaling (對比ADS7816U/2K5)
- Low-power shutdown supports duty-cycled acquisition (對比ADS7822UB)
設計說明
Route the fully differential input as a matched pair with symmetrical geometry and continuous ground reference. Keep switching nodes, high-current return paths, and digital clock traces away from the input network. Component tolerances, input bias current, source impedance, and acquisition timing affect the effective resolution even though the converter provides 12-bit output codes.
Use the automatic power-down capability for intermittent measurement systems and confirm that the controller can tolerate the converter's startup and conversion timing before each sample. Reference and supply bypassing should follow the manufacturer application guidance, with low-capacitance placement close to the relevant device pins. A stable, low-noise reference is particularly important because its variation directly affects both input range and conversion accuracy.
Do not select the reference voltage without checking the differential input common-mode limits and the signal's allowable input range. Serial-interface timing, conversion latency, and data-ready handling must also be implemented correctly. Before adopting a replacement, verify every pin, supply condition, acquisition requirement, and serial timing edge against the relevant manufacturer datasheet rather than relying only on the package drawing.
合規資訊
No specific environmental or material-compliance status was identified for this ordering code. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.