Microchip Technology

ATSAMD20G15B-AU - 48MHz Cortex-M0+ MCU | Microchip

MPN: ATSAMD20G15B-AU ✓ Aktif
1.62 V to 3.63 V Vdss 48-pin TQFP (7 x 7 mm) Package 48 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

ATSAMD20G15B-AU Ringkasan

The Microchip Technology ATSAMD20G15B-AU is a 32-bit Arm Cortex-M0+ microcontroller with a 48 MHz maximum clock, 32 KB of flash memory, 4 KB of SRAM, and a 48-pin TQFP package measuring 7 x 7 mm. It combines an efficient 32-bit processor with integrated serial peripherals and a 12-bit ADC for compact embedded-control designs.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, input/output ports, and peripherals into one device. The ATSAMD20G15 belongs to the SAM D20 family and sits within the hierarchy of embedded controller, 32-bit microcontroller, Arm Cortex-M0+ processor, and semiconductor. Its combination of moderate flash capacity, SRAM, and low-power-oriented peripherals makes it suitable for cost-sensitive control nodes rather than graphics-intensive or high-end applications.

Key features include operation up to 48 MHz, 38 I/O pins, 23 peripheral interrupt channels, and support for I2C, SPI, UART, PWM, and ADC functions. The 32 KB flash provides embedded program storage, while 4 KB of SRAM supports working memory, stack operations, buffers, and peripheral data handling. A 1.62 V to 3.63 V operating range supports both 3.3 V and lower-voltage system designs when individual peripheral and I/O limits permit.

The Arm Cortex-M0+ architecture uses a compact instruction set and deterministic interrupt-oriented design. This simplifies firmware development for home automation, metering, consumer products, and industrial controllers. The 12-bit ADC allows analog sensors to be connected directly to the MCU, while the serial interfaces reduce demand for external interface chips when communicating with sensors, memory, displays, or downstream controllers.

Typical applications include smart-home sensor nodes, utility and resource meters, compact industrial controllers, consumer appliances, lighting interfaces, and low-cost embedded equipment. In a metering design, the ADC can acquire sensor signals while UART, SPI, or I2C connects the controller to an external network or storage device. The 38 available I/O pins also allow multiple digital inputs, outputs, and communication functions to be integrated on one board.

PCB implementation should preserve short, controlled signal paths around the MCU, provide appropriate decoupling near the supply pins, and route high-current outputs separately from sensitive analog inputs. Firmware must also observe individual peripheral voltage, frequency, and timing limits rather than assuming every function can operate simultaneously at the maximum 48 MHz clock.

This page combines the manufacturer product information with package, memory, interface, and application guidance. It also distinguishes pin-compatible sourcing variants and identifies where application-specific verification is required before hardware release.

Pilihan pengganti yang segera untuk ATSAMD20G15B-AU — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ATSAMD20G15B-AU (sama faktor bentuk dan kaki) — berbeza dalam Package, Mounting Type, Operating Temperature Range, RoHS Status, SRAM.

Microchip Technology
Package: 48-TQFP (7x7 mm)
RoHS Status: Compliant
SRAM: 2 KB
Bandingkan Dengan ATSAMD20G15B-AU →
Microchip Technology
Package: 48-pin TQFP (7x7 mm)
Operating Temperature Range: -40 C to +85 C (industrial)
RoHS Status: Compliant
Bandingkan Dengan ATSAMD20G15B-AU →
Microchip Technology
Package: 48-pin TQFP (7x7 mm)
Mounting Type: Surface Mount (TQFP)
Operating Temperature Range: -40 C to +85 C (industrial)
Bandingkan Dengan ATSAMD20G15B-AU →

ATSAMD20G15B-AUT

✅ Masuk Drop-In
Microchip Technology
📦 48-pin TQFP (7 x 7 mm)
ARM Cortex-M0+ (32-bit, v6-M) · Up to 48 MHz · 32 KB (32K x 8) · 4 KB · 1.62 V to 3.63 V · 48-pin TQFP (7x7 mm) · Up to 38 · 6 (each USART/I2C/SPI)

Hubungi untuk harga

Lihat Datasheet →

ATSAMD20G15B-AU Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit ARM Cortex-M0+ flash microcontroller
Maximum CPU Frequency 48 MHz
CPU Architecture Arm Cortex-M0+
Flash Memory 32 KB (32K x 8)
SRAM 4 KB
Operating Voltage Range 1.62 V to 3.63 V
ADC Resolution 12 bit
Number of I/O Pins 38
Peripheral Interrupt Channels 23
Serial Interfaces I2C, SPI, UART
Timer/PWM Support PWM
Kemasan 48-pin TQFP (7 x 7 mm)
Jenis Pemasangan Surface mount
Gambaran Suhu Operasi -40 C to +85 C
Status Lingkungan Hidup Active
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_qualified

Panduan Konfigurasi Pin ATSAMD20G15B-AU 48-pin tqfp (7 x 7 mm)

Konfigurasi pin untuk ATSAMD20G15B-AU (48-pin tqfp (7 x 7 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 48-pin tqfp (7 x 7 mm) untuk ATSAMD20G15B-AU

Tiada data garisan pin yang diperoleh untuk ATSAMD20G15B-AU.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ATSAMD20G15B-AU patut untuk 6 aplikasis: Smart Home Sensor Nodes, Utility and Resource Metering, Consumer Appliance Control, Industrial Control Modules, LED Lighting and Dimming Control, Low-Cost Data Acquisition Module.

🧩

Smart Home Sensor Nodes

The ATSAMD20G15B-AU fits compact smart-home sensor nodes that combine digital inputs, analog measurements, and low-speed communications. Its 48 MHz Cortex-M0+ processor can debounce switches, filter sensor readings, and manage protocol tasks, while 38 I/O pins reduce the need for external I/O expanders. I2C and SPI support common environmental sensors, while UART provides a straightforward path to a gateway. The 32 KB flash is sufficient for focused firmware, and the 4 KB SRAM can support protocol buffers and application state. A 3.3 V implementation should still include local decoupling and verify that every attached peripheral shares compatible logic levels.

🏭

Utility and Resource Metering

The ATSAMD20G15B-AU is well suited to compact metering systems that acquire analog sensor signals and periodically report results. Its 12-bit ADC provides sufficient resolution for many cost-sensitive measurement circuits, while the 48 MHz Cortex-M0+ core supports calibration, filtering, accumulation, and status tracking. Serial interfaces can connect the meter to a display, storage device, or communications module, and the 38 I/O pins support tamper inputs, relay control, and indicators. The 32 KB flash stores application firmware and calibration parameters, while 4 KB of SRAM accommodates working buffers. Precision designs should use the manufacturer’s ADC guidance and shield sensitive analog routing from switching and high-current traces.

📱

Consumer Appliance Control

The ATSAMD20G15B-AU can coordinate motors, buttons, indicators, and sensors in a compact consumer appliance. Its PWM-capable peripherals support dimming, actuator timing, and motor-control functions, while the 48-pin TQFP package provides access to 38 I/O pins for panel inputs and discrete outputs. The 32-bit Cortex-M0+ processor handles state machines and communication protocols more efficiently than a simple fixed-function controller. UART, I2C, and SPI allow the MCU to connect a display, sensor module, or external driver. Design effort should focus on safe output states during reset and power loss, while the 1.62 V to 3.63 V range allows the supply architecture to be selected according to the appliance’s efficiency and noise requirements.

🏭

Industrial Control Modules

The ATSAMD20G15B-AU supports small industrial control modules requiring deterministic peripheral handling, flexible serial connectivity, and a modest embedded footprint. The 23 peripheral interrupt channels allow events from communications, timers, and external sensors to be serviced without polling every device. I2C and SPI can connect sensors and industrial memories, UART can support service consoles or field-bus transceivers, and PWM can control actuators or indicators. With 32 KB of flash and 4 KB of SRAM, the device targets focused control tasks rather than extensive data logging. Production designs should isolate field-side signals from the MCU, provide robust decoupling, and verify operating-temperature requirements across the complete industrial enclosure.

💡

LED Lighting and Dimming Control

The ATSAMD20G15B-AU is appropriate for LED lighting modules that require dimming, status indication, and serial configuration. Its PWM peripherals can generate controlled drive signals for LED drivers, while the 12-bit ADC can monitor a feedback or current-sense voltage when the board architecture provides one. The 38 I/O pins allow multiple channel selection, fault inputs, and communication lines without a large logic footprint. A compact appliance can store lighting profiles and control logic in the 32 KB flash, with 4 KB of SRAM reserved for buffers and state. Designers should account for LED-driver startup behavior, ensure fault outputs remain in a defined state during reset, and separate high-current LED paths from sensitive analog and MCU grounding paths.

📺

Low-Cost Data Acquisition Module

The ATSAMD20G15B-AU can serve as the control element in a compact data-acquisition module built around external sensors and converters. Its 12-bit ADC handles moderate-resolution measurements, while SPI and I2C allow high-speed or multi-channel converter data to be transferred into the MCU. The 48 MHz core provides enough processing throughput for scaling, filtering, calibration, and packet preparation, and 4 KB of SRAM can support acquisition buffers. The 38 I/O pins make it practical to add digital status, trigger, and communication signals. For designs needing greater resolution, an external ADC such as MCP3301 can be evaluated alongside the on-chip converter. Layout should separate analog inputs from digital clocks and provide local bypass capacitance at the MCU supply pins.

What is the operating voltage range of ATSAMD20G15B-AU?
The ATSAMD20G15B-AU operates from 1.62 V to 3.63 V according to the Microchip device documentation. This range covers low-voltage embedded systems, although individual I/O pins, peripherals, and external interface levels must also satisfy their respective operating limits. A 3.3 V supply is common for this device, while lower-voltage operation can reduce power consumption in compact or battery-powered equipment.
What are the key specifications of ATSAMD20G15B-AU that engineers should know?
The ATSAMD20G15B-AU combines a 48 MHz Arm Cortex-M0+ core with 32 KB of flash, 4 KB of SRAM, 38 I/O pins, and a 12-bit ADC in a 48-pin TQFP package. According to the Microchip product documentation, it also provides 23 peripheral interrupt channels and I2C, SPI, UART, and PWM functions. These parameters position the device well for compact embedded-control and sensor-node designs.
Where can I download the ATSAMD20G15B-AU datasheet PDF?
The ATSAMD20G15B-AU datasheet can be obtained from the official Microchip ATSAMD20G15 product page linked on this page. The manufacturer documentation covers the processor, memory, peripherals, electrical limits, package information, and programming resources. Use the Microchip document rather than a distributor summary when validating pin functions, clock settings, and operating limits for a new design.
Where can I find the ATSAMD20G15B-AU pinout?
The ATSAMD20G15B-AU pinout is documented in the Microchip device documentation and is also represented by the 48-pin package diagram used on this page. The package is a 7 x 7 mm TQFP with 38 I/O functions and dedicated power pins. Use the manufacturer pin-description table when assigning tracks because some peripheral signals are multiplexed across alternate I/O functions.
How much flash and SRAM does ATSAMD20G15B-AU have?
The ATSAMD20G15B-AU contains 32 KB of flash memory configured as 32K x 8 and provides 4 KB of SRAM according to Microchip product information. The flash stores the boot code and application firmware, while SRAM supports stack space, working variables, communication buffers, and state handling. Developers should size firmware and dynamic allocations against these fixed limits during board bring-up.
Is ATSAMD20G15B-AU suitable for home automation and metering applications?
Yes, the ATSAMD20G15B-AU is suitable for home automation, consumer, metering, and industrial-control applications. Its 32-bit Cortex-M0+ processor, 12-bit ADC, 38 I/O pins, and I2C, SPI, UART, and PWM peripherals cover common sensing, control, and communications tasks. A metering design can use the ADC for analog measurements and serial interfaces for communication with a display or network controller.
What is the difference between ATSAMD20G15B-AU and ATSAMD20G15B-AUT?
The ATSAMD20G15B-AU and ATSAMD20G15B-AUT identify the same Microchip ATSAMD20G15B device with the same 48 MHz Cortex-M0+ configuration, 32 KB flash, 4 KB SRAM, and 48-TQFP package. The suffix difference is associated with the ordering or packing format. Engineers should confirm the required shipping format before substitution, even though the electrical and package specifications are identical.
When should I choose ATSAMD20G15B-AU over another Cortex-M0+ microcontroller?
Choose the ATSAMD20G15B-AU when a design requires 48 MHz operation, 32 KB of flash, 4 KB of SRAM, 38 I/O pins, and integrated I2C, SPI, UART, PWM, and 12-bit ADC functions in a 48-TQFP package. It is a practical fit for compact control and metering nodes. For designs needing substantially more memory, higher analog resolution, or a different package, select a device whose validated peripheral set matches those requirements.
What is the best drop-in replacement for ATSAMD20G15B-AU?
The closest documented drop-in sourcing option is ATSAMD20G15B-AUT because it retains the 48-TQFP package, 48 MHz Cortex-M0+ core, 32 KB flash, and 4 KB SRAM. Confirm the ordering code and tape-and-reel or tray requirement before using it as a replacement. A functional alternative that uses another MCU family may require different firmware, peripheral mapping, and board qualification.
Can ATSAM4SD32BA-AU replace ATSAMD20G15B-AU?
The ATSAM4SD32BA-AU should not be treated as an automatic drop-in replacement for the ATSAMD20G15B-AU. Cross-reference listings identify it as a comparison part, but they do not establish identical pinout, peripheral mapping, memory organization, or register compatibility. A board-level substitution requires comparison of the Microchip package drawings, pin descriptions, electrical limits, and existing firmware dependencies.
Is ATSAMD20G15B-AU the same as ATSAM4S16BA-MUR?
No, the ATSAMD20G15B-AU and ATSAM4S16BA-MUR are distinct devices in different Microchip microcontroller families. The available comparison record does not establish pin-to-pin compatibility, equal flash and SRAM capacity, or matching peripheral assignments. Treat the ATSAM4S16BA-MUR as a functional comparison candidate only until the manufacturer package data and application requirements have been checked.
Where can I buy ATSAMD20G15B-AU online?
Use the Request a Quote form on this page to request ATSAMD20G15B-AU availability, lead time, and a quotation for the exact ordering code. The requested package and packing format should be stated clearly because ATSAMD20G15B-AU and ATSAMD20G15B-AUT can represent different commercial formats. Current commercial status should be confirmed through the quotation process rather than inferred from a cached search result.
What is the lead time and stock status of ATSAMD20G15B-AU?
Current stock and lead time for ATSAMD20G15B-AU should be requested through the Request a Quote form on this page. Include the required quantity, 48-TQFP package requirement, and acceptable tape-and-reel or tray format in the request. Microchip’s active product status does not by itself guarantee immediate allocation, so production planning should use a confirmed supply response.
What does the 12-bit ADC in ATSAMD20G15B-AU provide?
The ATSAMD20G15B-AU includes a 12-bit analog-to-digital converter for converting sensor voltages into digital values for firmware processing. According to the Microchip family description, the converter supports embedded measurement functions where analog front-end requirements are modest. For accurate results, follow the manufacturer guidance for reference voltage, sampling, averaging, input impedance, and analog-noise control.
How many I/O pins and interrupts does ATSAMD20G15B-AU have?
The ATSAMD20G15B-AU provides 38 I/O pins and 23 peripheral interrupt channels according to the Microchip technical documentation. The I/O count supports digital sensors, switches, indicators, and communication functions without requiring as much external interface logic. Because several pins can offer alternate peripheral functions, the final pin assignment must be checked against simultaneous communications, PWM, and analog requirements.

Data referensi kejuruteraan untuk ATSAMD20G15B-AU — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ATSAMD20G15B-AU for compact embedded-control designs that need a 48 MHz Arm Cortex-M0+ processor, 32 KB flash, 4 KB of SRAM, a 12-bit ADC, and 38 I/O pins without external interface expansion. It is especially suitable for smart-home nodes, metering equipment, consumer appliances, and small industrial controllers that use I2C, SPI, UART, or PWM. ATSAMD20G15B-AUT preserves the same electrical configuration and package and is the practical alternative when the required commercial packing format differs. Do not substitute ATSAM4S16BA-MUR or ATSAM4SD32BA-AU solely because they appear in comparison records; their packages, peripherals, memory, and firmware dependencies require separate qualification. For systems requiring more flash, SRAM, ADC resolution, or a different package, select a controller whose validated resources match those requirements.

Perbandingan dengan Gantian

Parametr Produk Ini ATSAMD20G15B-AUT
Brand Microchip Technology Microchip Technology
Package 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm)
CPU Core Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz
Flash Memory 32 KB (32K x 8) 32 KB (32K x 8)
SRAM 4 KB 4 KB
Operating Voltage Range 1.62 V to 3.63 V 1.62 V to 3.63 V
ADC Resolution 12 bit 12 bit
I/O Pins 38 38
Peripheral Interrupt Channels 23 23
Serial Interfaces I2C, SPI, UART I2C, SPI, UART
Ordering Suffix -AU -AUT

Penyeberangsung Jelas

  • Peripheral integration for compact embedded-control boards (vsATSAMD20G15B-AUT)
  • Direct compatibility with an existing 48-TQFP land pattern (vsATSAMD20G15B-AUT)
  • Balanced memory and I/O capability for compact controllers (vsATSAM4S16BA-MUR)

Catatan Desain

Place the MCU supply bypass capacitors directly beside their associated power pins, with the shortest possible return path through the ground plane. Route analog sensor inputs away from PWM outputs, clock signals, and switching-node copper. Because the device supports multiplexed peripheral functions, finalize the pin assignment before routing and preserve the package land pattern defined in the Microchip mechanical drawing.

Use a supply design that keeps the MCU within its 1.62 V to 3.63 V operating range under transient conditions. Do not assume that every I/O, ADC, or communication peripheral can tolerate the full range simultaneously; check each pin’s electrical limits and external-device levels. Establish defined states for outputs and enable paths during reset so external drivers and actuators cannot enter an unsafe condition.

Separate analog and digital return paths where practical, keep the ADC input traces short, and locate any input filtering components close to the source. The 48 MHz maximum clock requires a clean power and ground environment, particularly when ADC measurements and serial interfaces operate concurrently. Validate signal integrity and temperature behavior at the intended clock frequency rather than relying only on nominal software configuration.

Check firmware and board assumptions against the actual ATSAMD20G15B pin-multiplexing matrix. Avoid enabling multiple peripherals on one I/O pin without resolving the alternate-function conflict. Also size firmware, interrupt tables, stack usage, and DMA or communication buffers against the 32 KB flash and 4 KB SRAM limits before freezing the production software image.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer identifies the device as active, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited product and distributor information. AEC-Q100 qualification is not indicated for this ordering code.

Pencarian Berhubungan

ATSAMD20G15B-AU datasheet ATSAMD20G15B-AU pinout ATSAMD20G15B-AU specifications ATSAMD20G15B-AU equivalent ATSAMD20G15B-AU replacement ATSAMD20G15B-AU price ATSAMD20G15B-AU stock Microchip ATSAMD20G15B-AU ATSAMD20G15 48MHz Cortex-M0+ ATSAMD20G15B 48-TQFP pinout ATSAMD20G15B home automation controller ATSAMD20G15B metering application ATSAMD20G15B-AU vs ATSAMD20G15B-AUT ATSAMD20G15B-AU vs ATSAM4S16BA-MUR

Komponen dan Tanda berkaitan

Microchip Technology ATSAMD20G15B-AU ATSAMD20G15B-AUT ATSAM4S16BA-MUR ATSAM4SD32BA-AU ATSAMD20G15 Arm Cortex-M0+ 32-bit microcontroller embedded microcontroller flash microcontroller semiconductor 48-TQFP TQFP package family surface-mount package 32 KB flash memory 4 KB SRAM 12-bit ADC I2C SPI UART PWM 38 I/O pins home automation industrial control utility metering
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ