ATSAMD21E15B-MU - 48MHz Cortex-M0+ 32KB MCU | Microchip
MPN: ATSAMD21E15B-MU ✓ AktifATSAMD21E15B-MU Ringkasan
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATSAMD21E15B-MU belongs to the SAM D21 family and uses the ARM Cortex-M0+ core, a compact 32-bit architecture designed for embedded control. Within the product hierarchy, it is a microcontroller, embedded processor, and semiconductor, combining general-purpose logic with communication, analog, timing, and control peripherals.
The principal device characteristics are a 48 MHz Cortex-M0+ processor, 32 KB of flash memory, 4 KB of SRAM, and a 32-pin VQFN package measuring 5 x 5 mm. The manufacturer identifies the ATSAMD21E15 family as a low-cost, low-power, general-purpose solution with 32 pins. The B suffix and Functional Safety designation support use in designs where formal diagnostic features and controlled peripheral behavior are important.
Its advanced analog and PWM positioning makes the MCU suitable for mixed-signal control systems rather than pure digital data processing. The Cortex-M0+ platform supports event-driven firmware, while integrated analog conversion and PWM functions can reduce the number of external components in motor, lighting, sensing, and industrial-control products. The compact VQFN footprint also preserves board area in space-constrained equipment.
Typical applications include industrial sensor nodes, building-control modules, compact motor controllers, LED lighting systems, battery-powered accessories, and consumer products requiring a 48 MHz control core. For these systems, the useful combination is local flash execution, 4 KB SRAM, low-power operation, and integrated peripherals rather than high-end processor performance or large memory capacity.
PCB design should preserve the manufacturer's recommended power, decoupling, exposed-pad, and signal-routing requirements. Because this 5 x 5 mm VQFN package has a thermal and electrical land pattern that cannot be replaced by a generic QFN footprint without verification, use the manufacturer pin definition and package drawing when assigning tracks and vias.
This product page combines the exact manufacturer and distributor identifiers with practical guidance for package implementation, MCU selection, peripheral integration, and drop-in replacement assessment. The comparisons emphasize electrical and lifecycle constraints so engineers can distinguish a true pin-compatible replacement from a merely similar microcontroller.
Pilihan pengganti yang segera untuk ATSAMD21E15B-MU — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera ATSAMD21E15B-MU (sama faktor bentuk dan kaki) — berbeza dalam ADC, Operating Temperature, Package, RoHS Status, SRAM.
ATSAMD21E15B-AFT
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATSAMD21E15B-MU Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Device Family | SAM D21E |
| Processor Core | ARM Cortex-M0+ |
| CPU Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 4 KB |
| Tegangan Pemberi Arus | 3.3 V |
| Package Type | 32-pin VQFN |
| Package Dimensions | 5 x 5 mm |
| Jenis Pemasangan | Surface mount |
| Architecture | 32-bit RISC |
| Functional Safety | Functional Safety (FuSa) variant |
| Application Class | Low-cost, general-purpose embedded control |
| Power Class | Low-power |
| Analog Features | Advanced analog and PWM |
| Suhu Operasi | 85 °C maximum |
| Green Product | Green |
Panduan Konfigurasi Pin ATSAMD21E15B-MU 5 x 5 mm
Konfigurasi pin untuk ATSAMD21E15B-MU (5 x 5 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk ATSAMD21E15B-MU.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ATSAMD21E15B-MU patut untuk 6 aplikasis: Industrial Sensor and Control Nodes, Building Automation Modules, LED Lighting and Dimming Control, Compact Motor and Actuator Control, Battery-Powered Consumer Accessories, Embedded Data Acquisition Systems.
Industrial Sensor and Control Nodes
The ATSAMD21E15B-MU fits compact industrial sensor nodes because its 48 MHz ARM Cortex-M0+ core can execute acquisition, filtering, and control firmware while the 32 KB flash and 4 KB SRAM provide local program and working memory. The advanced analog and PWM positioning allows a single controller to supervise analog inputs and drive timing-based outputs. Its 5 x 5 mm VQFN package also reduces board area in distributed sensing equipment. For industrial deployment, verify the required operating temperature, isolation strategy, EMC requirements, and watchdog behavior in the manufacturer documentation before releasing the production design.
Disebarkan
Building Automation Modules
The ATSAMD21E15B-MU is well suited to building-automation modules that coordinate sensors, digital inputs, and actuator-control outputs in a compact enclosure. The 48 MHz Cortex-M0+ core provides enough performance for event-driven monitoring and control logic, while 4 KB of SRAM supports small working buffers. The advanced analog and PWM features can support mixed-signal monitoring without relying entirely on external components. Designers should confirm the exact ADC and timer resources assigned to each pin and implement the manufacturer-recommended decoupling and exposed-pad layout to preserve signal and thermal performance.
Disebarkan
LED Lighting and Dimming Control
The ATSAMD21E15B-MU can serve as the controller in an LED-lighting or dimming module because its advanced analog and PWM capabilities are relevant to generating controlled drive waveforms and monitoring feedback signals. The 48 MHz Cortex-M0+ processor can manage dimming commands, fault states, and communication updates, while 32 KB of flash accommodates focused control firmware. Keep PWM timing, fault handling, and current feedback within the limits of the selected device configuration. The 5 x 5 mm VQFN footprint is especially useful where the lighting electronics have limited board area.
Disebarkan
Compact Motor and Actuator Control
The ATSAMD21E15B-MU fits small motor and actuator-control products that need local timing, analog monitoring, and low-power microcontroller operation. Its PWM-capable feature set supports repetitive control tasks, while the 48 MHz Cortex-M0+ core can process position or feedback inputs and apply control updates. The 4 KB SRAM is sufficient for compact control loops, although complex algorithms may require careful memory allocation. Validate motor-drive topology, current limits, thermal conditions, and protective shutdown behavior independently because the MCU coordinates control functions rather than directly replacing the power stage.
Disebarkan
Battery-Powered Consumer Accessories
The ATSAMD21E15B-MU is appropriate for small battery-powered accessories requiring responsive local control without a high-end processor. Microchip identifies the ATSAMD21E15 family as low power, and its 48 MHz Cortex-M0+ core can execute control, user-interface, and peripheral-management firmware from 32 KB of flash with 4 KB of SRAM. The compact VQFN package assists miniaturization. Battery-life calculations must include the selected sleep mode, oscillator configuration, peripheral activity, and board leakage; use the device current-consumption data and application guidance to select a duty cycle that meets the product's energy target.
Disebarkan
Embedded Data Acquisition Systems
The ATSAMD21E15B-MU supports compact embedded data-acquisition systems where analog signals must be converted, filtered, and combined with digital control functions. Its advanced analog positioning, 48 MHz processing capability, and 32 KB flash provide a practical platform for focused acquisition and buffering, while 4 KB of SRAM constrains simultaneous sample depth and buffer architecture. Place analog and digital return paths carefully, observe the manufacturer's recommended VQFN exposed-pad layout, and verify acquisition timing, input range, and conversion specifications in the ATSAMD21E15B datasheet before fixing the sampling rate and signal-chain gain.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ATSAMD21E15B-MU — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ATSAMD21E15 |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 32-pin VQFN (5 x 5 mm) | 32-pin configuration; exact orderable package suffix requires verification |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB |
| SRAM | 4 KB | 4 KB |
| Supply Voltage | 3.3 V | 3.3 V |
| Power Class | Low power | Low power |
| Peripheral Positioning | Advanced analog and PWM | Advanced analog and PWM |
| Orderable MPN Status | ATSAMD21E15B-MU | Family-level identifier; select an exact suffix |
Penyeberangsung Jelas
- Compact 48 MHz control platform (vsATSAMD21E15)
- Functional Safety identification on the target order code (vsATSAMD21E15)
- Mixed-signal integration in a small package (vsATSAMD21E15)
Catatan Desain
Implement the ATSAMD21E15B-MU as a 5 x 5 mm VQFN rather than treating it as a generic 32-pin QFN. Follow the manufacturer land pattern for the exposed thermal pad, perimeter pads, and via arrangement. Keep supply and ground connections short, place decoupling capacitance at the appropriate device pins, and avoid routing fast or analog signals beneath the exposed pad unless the package guidance explicitly permits it.
Use the manufacturer's specified 3.3 V operating arrangement and validate every supply rail against the absolute maximum and operating-current limits in the ATSAMD21E15B datasheet. Place bulk and local decoupling according to the reference design, and account for startup, ADC, and PWM activity when sizing the supply. Do not assume the 85 °C maximum listing covers the complete electrical ratings for every peripheral or operating mode.
The VQFN exposed pad is central to both electrical performance and heat transfer. Provide the manufacturer-recommended exposed-pad solder area and thermal-via pattern, and avoid enclosing the pad with an uninterrupted top-layer copper pour that blocks heat flow. Calculate worst-case junction temperature using actual ambient temperature, package thermal data, and board copper rather than relying only on the component's maximum operating-temperature label.
Do not substitute ATSAMD21E15B-AF for ATSAMD21E15B-MU without redesigning the footprint: the -AF listing specifies 32-TQFP, while the target uses 32-VQFN. Likewise, ATSAMD21E15B-MUT differs only by its orderable packaging suffix and should not be treated as a distinct engineering alternative. Before any substitution, compare power pins, exposed-pad connectivity, reset, debug, clock, and every used peripheral signal in the manufacturer pin tables.
Maklumat Kesediaan
The distributor listing identifies the device as green, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration was provided. Compliance must be confirmed through the manufacturer product documentation.