ATSAMD21E15B-MU - 48MHz Cortex-M0+ 32KB MCU | Microchip
料号: ATSAMD21E15B-MU ✓ 量产中ATSAMD21E15B-MU 概述
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATSAMD21E15B-MU belongs to the SAM D21 family and uses the ARM Cortex-M0+ core, a compact 32-bit architecture designed for embedded control. Within the product hierarchy, it is a microcontroller, embedded processor, and semiconductor, combining general-purpose logic with communication, analog, timing, and control peripherals.
The principal device characteristics are a 48 MHz Cortex-M0+ processor, 32 KB of flash memory, 4 KB of SRAM, and a 32-pin VQFN package measuring 5 x 5 mm. The manufacturer identifies the ATSAMD21E15 family as a low-cost, low-power, general-purpose solution with 32 pins. The B suffix and Functional Safety designation support use in designs where formal diagnostic features and controlled peripheral behavior are important.
Its advanced analog and PWM positioning makes the MCU suitable for mixed-signal control systems rather than pure digital data processing. The Cortex-M0+ platform supports event-driven firmware, while integrated analog conversion and PWM functions can reduce the number of external components in motor, lighting, sensing, and industrial-control products. The compact VQFN footprint also preserves board area in space-constrained equipment.
Typical applications include industrial sensor nodes, building-control modules, compact motor controllers, LED lighting systems, battery-powered accessories, and consumer products requiring a 48 MHz control core. For these systems, the useful combination is local flash execution, 4 KB SRAM, low-power operation, and integrated peripherals rather than high-end processor performance or large memory capacity.
PCB design should preserve the manufacturer's recommended power, decoupling, exposed-pad, and signal-routing requirements. Because this 5 x 5 mm VQFN package has a thermal and electrical land pattern that cannot be replaced by a generic QFN footprint without verification, use the manufacturer pin definition and package drawing when assigning tracks and vias.
This product page combines the exact manufacturer and distributor identifiers with practical guidance for package implementation, MCU selection, peripheral integration, and drop-in replacement assessment. The comparisons emphasize electrical and lifecycle constraints so engineers can distinguish a true pin-compatible replacement from a merely similar microcontroller.
直接替换替代料: ATSAMD21E15B-MU ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ATSAMD21E15B-MU (相同外形与封装尺寸) ——差异在于 ADC, Operating Temperature, Package, RoHS Status, SRAM.
ATSAMD21E15B-AFT
✅ 直接替换联系询价
查看数据手册 →ATSAMD21E15B-MU 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Device Family | SAM D21E |
| Processor Core | ARM Cortex-M0+ |
| CPU Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 4 KB |
| 电源电压 | 3.3 V |
| Package Type | 32-pin VQFN |
| Package Dimensions | 5 x 5 mm |
| 安装类型 | Surface mount |
| Architecture | 32-bit RISC |
| Functional Safety | Functional Safety (FuSa) variant |
| Application Class | Low-cost, general-purpose embedded control |
| Power Class | Low-power |
| Analog Features | Advanced analog and PWM |
| 工作温度 | 85 °C maximum |
| Green Product | Green |
ATSAMD21E15B-MU 5 x 5 mm 引脚配置指南
ATSAMD21E15B-MU(5 x 5 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATSAMD21E15B-MU.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATSAMD21E15B-MU 适用于 6 应用s: Industrial Sensor and Control Nodes, Building Automation Modules, LED Lighting and Dimming Control, Compact Motor and Actuator Control, Battery-Powered Consumer Accessories, Embedded Data Acquisition Systems.
Industrial Sensor and Control Nodes
The ATSAMD21E15B-MU fits compact industrial sensor nodes because its 48 MHz ARM Cortex-M0+ core can execute acquisition, filtering, and control firmware while the 32 KB flash and 4 KB SRAM provide local program and working memory. The advanced analog and PWM positioning allows a single controller to supervise analog inputs and drive timing-based outputs. Its 5 x 5 mm VQFN package also reduces board area in distributed sensing equipment. For industrial deployment, verify the required operating temperature, isolation strategy, EMC requirements, and watchdog behavior in the manufacturer documentation before releasing the production design.
推荐
Building Automation Modules
The ATSAMD21E15B-MU is well suited to building-automation modules that coordinate sensors, digital inputs, and actuator-control outputs in a compact enclosure. The 48 MHz Cortex-M0+ core provides enough performance for event-driven monitoring and control logic, while 4 KB of SRAM supports small working buffers. The advanced analog and PWM features can support mixed-signal monitoring without relying entirely on external components. Designers should confirm the exact ADC and timer resources assigned to each pin and implement the manufacturer-recommended decoupling and exposed-pad layout to preserve signal and thermal performance.
推荐
LED Lighting and Dimming Control
The ATSAMD21E15B-MU can serve as the controller in an LED-lighting or dimming module because its advanced analog and PWM capabilities are relevant to generating controlled drive waveforms and monitoring feedback signals. The 48 MHz Cortex-M0+ processor can manage dimming commands, fault states, and communication updates, while 32 KB of flash accommodates focused control firmware. Keep PWM timing, fault handling, and current feedback within the limits of the selected device configuration. The 5 x 5 mm VQFN footprint is especially useful where the lighting electronics have limited board area.
推荐
Compact Motor and Actuator Control
The ATSAMD21E15B-MU fits small motor and actuator-control products that need local timing, analog monitoring, and low-power microcontroller operation. Its PWM-capable feature set supports repetitive control tasks, while the 48 MHz Cortex-M0+ core can process position or feedback inputs and apply control updates. The 4 KB SRAM is sufficient for compact control loops, although complex algorithms may require careful memory allocation. Validate motor-drive topology, current limits, thermal conditions, and protective shutdown behavior independently because the MCU coordinates control functions rather than directly replacing the power stage.
推荐
Battery-Powered Consumer Accessories
The ATSAMD21E15B-MU is appropriate for small battery-powered accessories requiring responsive local control without a high-end processor. Microchip identifies the ATSAMD21E15 family as low power, and its 48 MHz Cortex-M0+ core can execute control, user-interface, and peripheral-management firmware from 32 KB of flash with 4 KB of SRAM. The compact VQFN package assists miniaturization. Battery-life calculations must include the selected sleep mode, oscillator configuration, peripheral activity, and board leakage; use the device current-consumption data and application guidance to select a duty cycle that meets the product's energy target.
推荐
Embedded Data Acquisition Systems
The ATSAMD21E15B-MU supports compact embedded data-acquisition systems where analog signals must be converted, filtered, and combined with digital control functions. Its advanced analog positioning, 48 MHz processing capability, and 32 KB flash provide a practical platform for focused acquisition and buffering, while 4 KB of SRAM constrains simultaneous sample depth and buffer architecture. Place analog and digital return paths carefully, observe the manufacturer's recommended VQFN exposed-pad layout, and verify acquisition timing, input range, and conversion specifications in the ATSAMD21E15B datasheet before fixing the sampling rate and signal-chain gain.
推荐
推荐产品汇总
工程参考数据: ATSAMD21E15B-MU ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATSAMD21E15 |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 32-pin VQFN (5 x 5 mm) | 32-pin configuration; exact orderable package suffix requires verification |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB |
| SRAM | 4 KB | 4 KB |
| Supply Voltage | 3.3 V | 3.3 V |
| Power Class | Low power | Low power |
| Peripheral Positioning | Advanced analog and PWM | Advanced analog and PWM |
| Orderable MPN Status | ATSAMD21E15B-MU | Family-level identifier; select an exact suffix |
关键差异点
- Compact 48 MHz control platform (对比 ATSAMD21E15)
- Functional Safety identification on the target order code (对比 ATSAMD21E15)
- Mixed-signal integration in a small package (对比 ATSAMD21E15)
设计说明
Implement the ATSAMD21E15B-MU as a 5 x 5 mm VQFN rather than treating it as a generic 32-pin QFN. Follow the manufacturer land pattern for the exposed thermal pad, perimeter pads, and via arrangement. Keep supply and ground connections short, place decoupling capacitance at the appropriate device pins, and avoid routing fast or analog signals beneath the exposed pad unless the package guidance explicitly permits it.
Use the manufacturer's specified 3.3 V operating arrangement and validate every supply rail against the absolute maximum and operating-current limits in the ATSAMD21E15B datasheet. Place bulk and local decoupling according to the reference design, and account for startup, ADC, and PWM activity when sizing the supply. Do not assume the 85 °C maximum listing covers the complete electrical ratings for every peripheral or operating mode.
The VQFN exposed pad is central to both electrical performance and heat transfer. Provide the manufacturer-recommended exposed-pad solder area and thermal-via pattern, and avoid enclosing the pad with an uninterrupted top-layer copper pour that blocks heat flow. Calculate worst-case junction temperature using actual ambient temperature, package thermal data, and board copper rather than relying only on the component's maximum operating-temperature label.
Do not substitute ATSAMD21E15B-AF for ATSAMD21E15B-MU without redesigning the footprint: the -AF listing specifies 32-TQFP, while the target uses 32-VQFN. Likewise, ATSAMD21E15B-MUT differs only by its orderable packaging suffix and should not be treated as a distinct engineering alternative. Before any substitution, compare power pins, exposed-pad connectivity, reset, debug, clock, and every used peripheral signal in the manufacturer pin tables.
合规信息
The distributor listing identifies the device as green, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration was provided. Compliance must be confirmed through the manufacturer product documentation.