Microchip Technology

ATSAMD21E15B-MU - 48MHz Cortex-M0+ 32KB MCU | Microchip

부품 번호: ATSAMD21E15B-MU ✓ 활성
3.3 V Vdss 32-pin VQFN Package 48 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

ATSAMD21E15B-MU 개요

The Microchip Technology ATSAMD21E15B-MU is a 32-bit ARM Cortex-M0+ SAM D21E microcontroller with a 48 MHz operating frequency, 32 KB of flash memory, and 32 pins in a 5 x 5 mm VQFN package. It is positioned as a low-cost, general-purpose embedded controller for compact low-power systems. The device operates from a 3.3 V supply and is identified as a Functional Safety (FuSa) microcontroller variant.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATSAMD21E15B-MU belongs to the SAM D21 family and uses the ARM Cortex-M0+ core, a compact 32-bit architecture designed for embedded control. Within the product hierarchy, it is a microcontroller, embedded processor, and semiconductor, combining general-purpose logic with communication, analog, timing, and control peripherals.

The principal device characteristics are a 48 MHz Cortex-M0+ processor, 32 KB of flash memory, 4 KB of SRAM, and a 32-pin VQFN package measuring 5 x 5 mm. The manufacturer identifies the ATSAMD21E15 family as a low-cost, low-power, general-purpose solution with 32 pins. The B suffix and Functional Safety designation support use in designs where formal diagnostic features and controlled peripheral behavior are important.

Its advanced analog and PWM positioning makes the MCU suitable for mixed-signal control systems rather than pure digital data processing. The Cortex-M0+ platform supports event-driven firmware, while integrated analog conversion and PWM functions can reduce the number of external components in motor, lighting, sensing, and industrial-control products. The compact VQFN footprint also preserves board area in space-constrained equipment.

Typical applications include industrial sensor nodes, building-control modules, compact motor controllers, LED lighting systems, battery-powered accessories, and consumer products requiring a 48 MHz control core. For these systems, the useful combination is local flash execution, 4 KB SRAM, low-power operation, and integrated peripherals rather than high-end processor performance or large memory capacity.

PCB design should preserve the manufacturer's recommended power, decoupling, exposed-pad, and signal-routing requirements. Because this 5 x 5 mm VQFN package has a thermal and electrical land pattern that cannot be replaced by a generic QFN footprint without verification, use the manufacturer pin definition and package drawing when assigning tracks and vias.

This product page combines the exact manufacturer and distributor identifiers with practical guidance for package implementation, MCU selection, peripheral integration, and drop-in replacement assessment. The comparisons emphasize electrical and lifecycle constraints so engineers can distinguish a true pin-compatible replacement from a merely similar microcontroller.

드롭인 대체품: ATSAMD21E15B-MU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ATSAMD21E15B-MU (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Operating Temperature, Package, RoHS Status, SRAM.

Microchip Technology
ADC: 12-bit, up to 14 channels
Package: 32-pin TQFP (7x7 mm)
RoHS Status: Compliant
비교 대상: ATSAMD21E15B-MU →
Microchip Technology
ADC: 12-bit, 20 channels
Operating Temperature: -40 °C to +85 °C (industrial)
Package: 32-pin TQFP
비교 대상: ATSAMD21E15B-MU →
Microchip Technology
ADC: 12-bit, up to 350 ksps, 10 channels
Operating Temperature: -40 C to +85 C (industrial)
Package: 32-pin VQFN (5x5 mm)
비교 대상: ATSAMD21E15B-MU →
Microchip Technology
ADC: 12-channel, 12-bit, 350 ksps
Operating Temperature: -40C to +105C
Package: 32-pin VQFN (5x5 mm)
비교 대상: ATSAMD21E15B-MU →

ATSAMD21E15B-AFT

✅ 드롭인
Microchip Technology
📦 32-pin VQFN
ARM Cortex-M0+ · 32-bit · 48 MHz · 32 KB (32K x 8) · 4 KB · 1.62 V to 3.63 V · 26 (max) · 32-pin TQFP (7x7 mm)

가격 문의

데이터시트 보기 →

ATSAMD21E15B-MU 최대 정격 & 전기적 특성

Product Type 32-bit ARM Cortex-M0+ microcontroller
Device Family SAM D21E
Processor Core ARM Cortex-M0+
CPU Frequency 48 MHz
Flash Memory 32 KB (32K x 8)
SRAM 4 KB
공급 전압 3.3 V
Package Type 32-pin VQFN
Package Dimensions 5 x 5 mm
실장 유형 Surface mount
Architecture 32-bit RISC
Functional Safety Functional Safety (FuSa) variant
Application Class Low-cost, general-purpose embedded control
Power Class Low-power
Analog Features Advanced analog and PWM
동작 온도 85 °C maximum
Green Product Green

ATSAMD21E15B-MU 5 x 5 mm 핀 구성 가이드

ATSAMD21E15B-MU(5 x 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

ATSAMD21E15B-MU의 5 x 5 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ATSAMD21E15B-MU.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ATSAMD21E15B-MU 적합 용도: 6 애플리케이션s: Industrial Sensor and Control Nodes, Building Automation Modules, LED Lighting and Dimming Control, Compact Motor and Actuator Control, Battery-Powered Consumer Accessories, Embedded Data Acquisition Systems.

🏭

Industrial Sensor and Control Nodes

The ATSAMD21E15B-MU fits compact industrial sensor nodes because its 48 MHz ARM Cortex-M0+ core can execute acquisition, filtering, and control firmware while the 32 KB flash and 4 KB SRAM provide local program and working memory. The advanced analog and PWM positioning allows a single controller to supervise analog inputs and drive timing-based outputs. Its 5 x 5 mm VQFN package also reduces board area in distributed sensing equipment. For industrial deployment, verify the required operating temperature, isolation strategy, EMC requirements, and watchdog behavior in the manufacturer documentation before releasing the production design.

🏭

Building Automation Modules

The ATSAMD21E15B-MU is well suited to building-automation modules that coordinate sensors, digital inputs, and actuator-control outputs in a compact enclosure. The 48 MHz Cortex-M0+ core provides enough performance for event-driven monitoring and control logic, while 4 KB of SRAM supports small working buffers. The advanced analog and PWM features can support mixed-signal monitoring without relying entirely on external components. Designers should confirm the exact ADC and timer resources assigned to each pin and implement the manufacturer-recommended decoupling and exposed-pad layout to preserve signal and thermal performance.

💡

LED Lighting and Dimming Control

The ATSAMD21E15B-MU can serve as the controller in an LED-lighting or dimming module because its advanced analog and PWM capabilities are relevant to generating controlled drive waveforms and monitoring feedback signals. The 48 MHz Cortex-M0+ processor can manage dimming commands, fault states, and communication updates, while 32 KB of flash accommodates focused control firmware. Keep PWM timing, fault handling, and current feedback within the limits of the selected device configuration. The 5 x 5 mm VQFN footprint is especially useful where the lighting electronics have limited board area.

🔧

Compact Motor and Actuator Control

The ATSAMD21E15B-MU fits small motor and actuator-control products that need local timing, analog monitoring, and low-power microcontroller operation. Its PWM-capable feature set supports repetitive control tasks, while the 48 MHz Cortex-M0+ core can process position or feedback inputs and apply control updates. The 4 KB SRAM is sufficient for compact control loops, although complex algorithms may require careful memory allocation. Validate motor-drive topology, current limits, thermal conditions, and protective shutdown behavior independently because the MCU coordinates control functions rather than directly replacing the power stage.

📱

Battery-Powered Consumer Accessories

The ATSAMD21E15B-MU is appropriate for small battery-powered accessories requiring responsive local control without a high-end processor. Microchip identifies the ATSAMD21E15 family as low power, and its 48 MHz Cortex-M0+ core can execute control, user-interface, and peripheral-management firmware from 32 KB of flash with 4 KB of SRAM. The compact VQFN package assists miniaturization. Battery-life calculations must include the selected sleep mode, oscillator configuration, peripheral activity, and board leakage; use the device current-consumption data and application guidance to select a duty cycle that meets the product's energy target.

📟

Embedded Data Acquisition Systems

The ATSAMD21E15B-MU supports compact embedded data-acquisition systems where analog signals must be converted, filtered, and combined with digital control functions. Its advanced analog positioning, 48 MHz processing capability, and 32 KB flash provide a practical platform for focused acquisition and buffering, while 4 KB of SRAM constrains simultaneous sample depth and buffer architecture. Place analog and digital return paths carefully, observe the manufacturer's recommended VQFN exposed-pad layout, and verify acquisition timing, input range, and conversion specifications in the ATSAMD21E15B datasheet before fixing the sampling rate and signal-chain gain.

추천 제품 요약

ATSAMD21E15B-MU Microchip Technology 사용처: Industrial Sensor and Control Nodes, Building Automation Modules, LED Lighting and Dimming Control, Compact Motor and Actuator Control, Battery-Powered Consumer Accessories, Embedded Data Acquisition Systems ATSAMD21E15 Microchip SAM D21 family reference 사용처: Industrial Sensor and Control Nodes, Building Automation Modules, LED Lighting and Dimming Control, Compact Motor and Actuator Control, Battery-Powered Consumer Accessories, Embedded Data Acquisition Systems
What are the key specifications of ATSAMD21E15B-MU?
The ATSAMD21E15B-MU is a 48 MHz, 32-bit ARM Cortex-M0+ microcontroller with 32 KB of flash memory, 4 KB of SRAM, and a 32-pin 5 x 5 mm VQFN package. Microchip describes the ATSAMD21E15 family as a low-cost, low-power, general-purpose device with advanced analog and PWM capabilities. According to the Microchip product page, the part is a Functional Safety (FuSa) variant intended for embedded systems operating from 3.3 V.
Where can I download the ATSAMD21E15B-MU datasheet PDF?
The ATSAMD21E15B-MU datasheet and supporting documentation are available through the official Microchip ATSAMD21E15 product page and the linked manufacturer datasheet resources. The family documentation is titled for the ATSAMD21E15B low-power 32-bit Cortex-M0+ microcontroller. Use the manufacturer document because it contains the authoritative pin descriptions, electrical characteristics, package drawings, and peripheral details required for PCB and firmware implementation.
Where can I find the ATSAMD21E15B-MU pinout?
The ATSAMD21E15B-MU pinout is defined by the 32-pin VQFN pin description in the Microchip ATSAMD21E15B datasheet. The device uses a 5 x 5 mm surface-mount package, and its exposed thermal pad and power pins must be implemented according to the manufacturer package drawing. Use the pin-description table and land-pattern dimensions in the manufacturer documentation when assigning PCB tracks rather than relying on a generic QFN-32 drawing.
What does ATSAMD21E15B-MU replace on a pin-compatible board?
The closest documented same-family alternative is ATSAMD21E15, which Microchip identifies as a 32 KB-flash, 4 KB-RAM, 48 MHz-class SAM D21 general-purpose microcontroller in a 32-pin configuration. Its exact package suffix and pin mapping must be confirmed before substitution. The ATSAMD21E15B-AF is not a drop-in option for the -MU board because the verified listing identifies a 32-pin TQFP package rather than the target's 32-pin VQFN package.
Is ATSAMD21E15B-MU suitable for low-power embedded control?
Yes, the ATSAMD21E15B-MU is suitable for low-power embedded control because Microchip classifies the ATSAMD21E15 family as low power. Its 48 MHz Cortex-M0+ core, 32 KB of flash, and 4 KB of SRAM are appropriate for event-driven firmware, monitoring, and local control. The complete energy profile still depends on the selected operating mode, peripheral activity, clock configuration, and board-level leakage, which must be evaluated with the device's current-consumption characteristics.
ATSAMD21E15B-MU vs ATSAMD21E15 - which should be selected?
ATSAMD21E15B-MU is the orderable 32-VQFN device with a 48 MHz Cortex-M0+ core, 32 KB flash, 4 KB SRAM, and Functional Safety designation. ATSAMD21E15 is the broader manufacturer family designation and identifies the same core, memory sizes, low-power positioning, and 32-pin configuration. Choose -MU for the specific VQFN orderable variant and use ATSAMD21E15 as the family-level reference; verify the exact package suffix before treating the latter as a board-level replacement.
When should I choose ATSAMD21E15B-MU over a similar 32-bit MCU?
Choose ATSAMD21E15B-MU when a design needs a compact 48 MHz Cortex-M0+ controller with 32 KB flash, 4 KB SRAM, advanced analog and PWM functions, and a 5 x 5 mm VQFN footprint. It is especially suitable for compact industrial, lighting, motor-control, and sensor-node designs. Choose a different MCU when the application needs more flash, more RAM, a larger peripheral set, a different package, or a processor core outside the low-cost Cortex-M0+ class.
Can the ATSAMD21E15B-MU be used in industrial and building automation products?
The ATSAMD21E15B-MU can support industrial and building-automation control functions because it combines a 48 MHz Cortex-M0+ core with advanced analog and PWM capabilities in a compact 32-VQFN package. Its Functional Safety (FuSa) identification is also relevant to controlled applications. Designers should still verify the required operating temperature, safety certification scope, EMC conditions, peripheral coverage, and system-level diagnostic requirements for the target product.
What is the lead time for ATSAMD21E15B-MU?
The current lead time and lot availability for ATSAMD21E15B-MU should be requested through the Request a Quote form on this page. Distributor pages can change inventory rapidly, and the manufacturer product page identifies the device while the MPN suffix specifies the commercial VQFN packaging arrangement. Request the current delivery schedule, minimum order quantity, and authorized-channel availability when planning production.
Is ATSAMD21E15B-MU in stock?
Current ATSAMD21E15B-MU stock should be checked through the Request a Quote form on this page by entering the exact MPN and required quantity. A listing's wording about immediate shipment is not a durable inventory guarantee, particularly for programmed or assembled production quantities. The exact MPN includes the -MU package and commercial suffix, so distributors should quote that full suffix rather than the broader ATSAMD21E15 family name.
What is the price of ATSAMD21E15B-MU?
The current commercial price for ATSAMD21E15B-MU is obtained through the Request a Quote form on this page. Quote requests should specify the required quantity, package suffix, target date, and shipment destination. Because microcontroller pricing can vary with order volume, distribution channel, and schedule, purchasing should use the live response for the exact ATSAMD21E15B-MU order code rather than a family-level or historical price.
Where can I buy ATSAMD21E15B-MU online?
Use the Request a Quote form on this page to purchase ATSAMD21E15B-MU with the required quantity and delivery information. Quote the full ATSAMD21E15B-MU suffix because it identifies the commercial 32-VQFN arrangement. The form allows procurement teams to confirm current availability, authorized-channel allocation, lot traceability, and the expected lead time for the production schedule.
What programming tools are compatible with ATSAMD21E15B-MU?
The ATSAMD21E15B-MU uses the ARM Cortex-M0+ programming and debug architecture, so it requires a compatible SWD or JTAG debug interface and the programming software supported for the SAM D21 family. The verified listing identifies the MCU as an ARM Cortex-M0+ device; it does not state a specific programmer model. Select a programmer that supports SAM D21 devices, confirm SWD voltage levels, and use the device configuration data released by Microchip.
What is the best Microchip equivalent for ATSAMD21E15B-MU?
ATSAMD21E15 is the closest documented Microchip family alternative because the manufacturer describes it with the same Cortex-M0+ architecture, 48 MHz class, 32 KB flash, 4 KB RAM, low-power positioning, and 32-pin configuration. However, ATSAMD21E15 is a family identifier rather than a fully specified package suffix. Confirm that its chosen package is 5 x 5 mm VQFN and that every exposed-pad and peripheral signal maps identically before approving it as a drop-in replacement.
What can replace ATSAMD21E15B-MU without redesigning the PCB?
A PCB-compatible replacement must use the same 5 x 5 mm VQFN-32 land pattern and reproduce the target's power, ground, exposed-pad, reset, clock, debug, and peripheral pin assignments. ATSAMD21E15 is the closest family-level candidate identified by Microchip, but its exact orderable suffix must be checked. The ATSAMD21E15B-AF cannot be installed directly because its verified listing specifies 32-TQFP rather than 32-VQFN, requiring a footprint change.
How does the ATSAMD21E15B-MU support analog and PWM control?
The ATSAMD21E15B-MU is positioned by Microchip as a low-power 32-bit Cortex-M0+ MCU with advanced analog and PWM. These functions allow a controller to measure analog inputs and generate precision timing-based outputs without requiring a separate PWM IC or dedicated high-performance control processor. The exact ADC resolution, channel count, timer configuration, and electrical limits should be selected from the ATSAMD21E15B datasheet for the implemented pins and operating conditions.

엔지니어링 참조 데이터: ATSAMD21E15B-MU — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Select ATSAMD21E15B-MU when the board design requires a compact 5 x 5 mm VQFN controller with a 48 MHz ARM Cortex-M0+ core, 32 KB flash, 4 KB SRAM, advanced analog, and PWM resources. It is a strong fit for industrial sensing, building automation, compact lighting, actuator control, and mixed-signal acquisition products that value the low-power SAM D21 platform. ATSAMD21E15 is the closest documented family-level reference, but it is not a complete board-level substitution until the exact package suffix and pin map are confirmed. Avoid ATSAMD21E15B-AF when PCB compatibility matters because it uses TQFP rather than VQFN and requires a new footprint. For applications requiring substantially more memory, higher performance, or additional peripheral capacity, select a different MCU rather than forcing extra software into the target's 4 KB SRAM.

대체품과의 비교

파라미터 이 제품 ATSAMD21E15
Brand Microchip Technology Microchip Technology
Package 32-pin VQFN (5 x 5 mm) 32-pin configuration; exact orderable package suffix requires verification
Processor Core ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz
Flash Memory 32 KB 32 KB
SRAM 4 KB 4 KB
Supply Voltage 3.3 V 3.3 V
Power Class Low power Low power
Peripheral Positioning Advanced analog and PWM Advanced analog and PWM
Orderable MPN Status ATSAMD21E15B-MU Family-level identifier; select an exact suffix

주요 차별점

  • Compact 48 MHz control platform (vs ATSAMD21E15)
  • Functional Safety identification on the target order code (vs ATSAMD21E15)
  • Mixed-signal integration in a small package (vs ATSAMD21E15)

설계 노트

Implement the ATSAMD21E15B-MU as a 5 x 5 mm VQFN rather than treating it as a generic 32-pin QFN. Follow the manufacturer land pattern for the exposed thermal pad, perimeter pads, and via arrangement. Keep supply and ground connections short, place decoupling capacitance at the appropriate device pins, and avoid routing fast or analog signals beneath the exposed pad unless the package guidance explicitly permits it.

Use the manufacturer's specified 3.3 V operating arrangement and validate every supply rail against the absolute maximum and operating-current limits in the ATSAMD21E15B datasheet. Place bulk and local decoupling according to the reference design, and account for startup, ADC, and PWM activity when sizing the supply. Do not assume the 85 °C maximum listing covers the complete electrical ratings for every peripheral or operating mode.

The VQFN exposed pad is central to both electrical performance and heat transfer. Provide the manufacturer-recommended exposed-pad solder area and thermal-via pattern, and avoid enclosing the pad with an uninterrupted top-layer copper pour that blocks heat flow. Calculate worst-case junction temperature using actual ambient temperature, package thermal data, and board copper rather than relying only on the component's maximum operating-temperature label.

Do not substitute ATSAMD21E15B-AF for ATSAMD21E15B-MU without redesigning the footprint: the -AF listing specifies 32-TQFP, while the target uses 32-VQFN. Likewise, ATSAMD21E15B-MUT differs only by its orderable packaging suffix and should not be treated as a distinct engineering alternative. Before any substitution, compare power pins, exposed-pad connectivity, reset, debug, clock, and every used peripheral signal in the manufacturer pin tables.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The distributor listing identifies the device as green, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration was provided. Compliance must be confirmed through the manufacturer product documentation.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

atsamd21e15b aut ATSAMD21E15B-MU datasheet ATSAMD21E15B-MU pinout ATSAMD21E15B-MU datasheet pdf ATSAMD21E15B-MU equivalent ATSAMD21E15B-MU replacement ATSAMD21E15B-MU cross reference ATSAMD21E15B-MU footprint ATSAMD21E15B-MU price ATSAMD21E15B-MU stock Microchip ATSAMD21E15B-MU ATSAMD21E15B 32KB flash 4KB RAM ATSAMD21E15B-MU vs ATSAMD21E15 ATSAMD21E15 32 pin VQFN pinout ATSAMD21E15B application circuit

관련 부품 & 용어

Microchip Technology ATSAMD21E15B-MU ATSAMD21E15 ATSAMD21E15B-AF ATSAMD21E15B-MUT SAM D21E ARM Cortex-M0+ microcontroller embedded processor semiconductor Functional Safety FuSa 32 KB flash memory 4 KB SRAM 48 MHz 3.3 V 32-pin VQFN QFN package family surface-mount package advanced analog PWM industrial sensor control building automation LED lighting control SWD debugging
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기