Microchip Technology

ATSAMS70Q19A-AN - 300MHz Cortex-M7 MCU | Microchip

MPN: ATSAMS70Q19A-AN ✓ Aktif
1.08 V to 3.6 V Vdss 144-pin LQFP Package 300 MHz Speed 512 KB (512K x 8) Memory
MOQ: 1 |

ATSAMS70Q19A-AN Ringkasan

The Microchip ATSAMS70Q19A-AN is a 32-bit ARM Cortex-M7 flash microcontroller operating at up to 300 MHz, with 512 KB of Flash memory, 256 KB of SRAM, and a 144-pin LQFP package measuring 20 mm by 20 mm. It combines a high-performance Cortex-M7 processor with an integrated floating-point unit for demanding control, networking, graphics, and signal-processing applications.

A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile working memory, peripherals, and communication interfaces. The ATSAMS70 belongs to the SAM S70 family, a 32-bit embedded-control hierarchy built around the ARM Cortex-M7 architecture. Compared with an 8- or 16-bit MCU, this device supports larger firmware, richer real-time workloads, and substantially greater arithmetic throughput.

Key device attributes include a 300 MHz maximum operating frequency, 512 KB of Flash, and 256 KB of SRAM. According to Microchip, the device uses a high-performance 32-bit ARM Cortex-M7 processor with a Floating Point Unit. The combination is useful for control loops that must remain responsive while executing protocol stacks, image processing, or floating-point calculations. Its 144-pin LQFP package also provides a comparatively high peripheral count for demanding embedded systems.

The product is based on the Cortex-M7 architecture and includes a floating-point unit, enabling efficient single- and double-precision arithmetic alongside general-purpose embedded control. This architecture is suitable when an application must combine deterministic peripheral access with higher-level computation, but a more complex application processor is unnecessary. Its large memory footprint helps separate application code, graphics data, communications buffers, and real-time workloads.

Typical ATSAMS70Q19A-AN applications include industrial automation, connected industrial equipment, high-end human-machine interfaces, audio and communications control, test and measurement systems, and embedded graphics or control nodes. The 300 MHz Cortex-M7 core provides processing headroom for EtherCAT or similar industrial communication duties, while the SRAM capacity can reduce pressure from external memory in data-intensive control systems.

Designers should verify the exact pin assignments, power rails, decoupling requirements, clock configuration, and peripheral multiplexing in the Microchip pin-description tables before laying out the PCB. The 144-pin LQFP footprint requires careful escape routing, and firmware should be tested for the intended operating temperature, supply range, and peripheral combinations rather than relying only on the processor headline frequency.

This product page combines the manufacturer's architectural description with practical selection, application, packaging, and drop-in replacement guidance. It focuses attention on the factors that determine PCB compatibility and firmware fit: the 144-lead LQFP footprint, Cortex-M7 core, memory capacity, package suffix, and family-specific peripheral behavior.

Pilihan pengganti yang segera untuk ATSAMS70Q19A-AN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ATSAMS70Q19A-AN (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, ADC, SRAM, Package, CAN.

Microchip Technology
ADC: 12-bit, up to 24 channels
Package: 144-LQFP (20x20 mm)
CAN: 2x CAN-FD controllers
Bandingkan Dengan ATSAMS70Q19A-AN →
Microchip Technology
Flash Memory: 1 MB (1M x 8)
SRAM: 384 KB
Bandingkan Dengan ATSAMS70Q19A-AN →
Microchip Technology
ADC: 12-bit, up to 2 MSPS, 24 channels
SRAM: 384 KB
Package: 144-LQFP (20x20 mm)
Bandingkan Dengan ATSAMS70Q19A-AN →
Microchip Technology
Flash Memory: 1 MB (1024 KB)
ADC: 2x 12-bit AFEC, up to 1.5 Msps
SRAM: 384 KB
Bandingkan Dengan ATSAMS70Q19A-AN →

ATSAME70Q19A-AN

✅ Masuk Drop-In
Microchip Technology
📦 LQFP-144
ARM Cortex-M7 with FPU · 300 MHz · 512 KB (512K x 8) · 256 KB · 16 KB · 16 KB · 1.8 V / 2.5 V / 3.3 V · 1.62 V to 3.6 V

Hubungi untuk harga

Lihat Datasheet →

ATSAMS70Q21A-AN

✅ Masuk Drop-In
📦 LQFP-144
Same 300 MHz Cortex-M7 and 144-pin LQFP format, while memory capacity differs from the ATSAMS70Q19A-AN's 512 KB Flash

📋 Alternatif rujukan (tidak dalam katalog)

ATSAME70Q21A-AN

✅ Masuk Drop-In
Microchip Technology
📦 LQFP-144
ARM Cortex-M7 with FPU · 300 MHz · 2 MB (2048 KB) dual-bank · 384 KB · 1.62 V to 3.6 V · 144-LQFP (20x20 mm) · Surface Mount · -40C to +85C

Hubungi untuk harga

Lihat Datasheet →

ATSAMS70Q20A-AN

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 LQFP-144
ARM Cortex-M7 with FPU (single + double precision) · 300 MHz · 1 MB (1024 KB) · 384 KB · 16 KB · 16 KB · 1.2 V to 1.32 V · 1.7 V to 3.6 V

Hubungi untuk harga

Lihat Datasheet →

ATSAME70Q20A-AN

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 LQFP-144
32-bit ARM Cortex-M7 microcontroller · ARM Cortex-M7 · 32-bit RISC · 300 MHz · Integrated · 1 MB (1M x 8) · 384 KB · 1.8 V, 2.5 V, or 3.3 V

Hubungi untuk harga

Lihat Datasheet →

ATSAMS70Q19A-AN Penilaian maksimum & Ciri-ciri Elektrik

Processor Core 32-bit ARM Cortex-M7 with Floating Point Unit
Maximum CPU Frequency 300 MHz
Flash Memory 512 KB (512K x 8)
SRAM 256 KB
Architecture 32-bit RISC
Product Family SAM S70
Supply Voltage Range 1.08 V to 3.6 V
Package Type 144-pin LQFP
Package Dimensions 20 mm x 20 mm
Jenis Pemasangan Surface Mount
Terminal Count 144 terminals
FPU Integrated single- and double-precision floating-point unit
Status RoHS Compliant

Panduan Konfigurasi Pin ATSAMS70Q19A-AN 20 mm x 20 mm

Konfigurasi pin untuk ATSAMS70Q19A-AN (20 mm x 20 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 20 mm x 20 mm untuk ATSAMS70Q19A-AN

Tiada data garisan pin yang diperoleh untuk ATSAMS70Q19A-AN.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ATSAMS70Q19A-AN patut untuk 6 aplikasis: Industrial Automation Controller, EtherCAT or Real-Time Communications Node, High-End Human-Machine Interface, Audio Processing and Amplifier Control, Test and Measurement Instrument, Embedded Graphics and Imaging Controller.

🏭

Industrial Automation Controller

The ATSAMS70Q19A-AN fits industrial automation controllers that must execute motion control, diagnostics, communications, and supervisory logic on one processor. Its 300 MHz Cortex-M7 core provides substantially more headroom than an 8- or 16-bit controller, while 256 KB of SRAM supports working buffers and communication queues. The 512 KB of Flash can hold control firmware, parameter tables, and diagnostics. Place the MCU beside the power conversion and signal-conditioning stages, then assign its pins according to the exact S70 multiplexing tables. Validate the control-loop timing, external interface timing, watchdog behavior, and industrial temperature range before production deployment.

🌐

EtherCAT or Real-Time Communications Node

The ATSAMS70Q19A-AN is appropriate for a real-time communications node because the 300 MHz Cortex-M7 core can execute protocol processing alongside deterministic control tasks, and 256 KB of SRAM provides room for buffers. A floating-point unit can accelerate signal calculations without a separate accelerator. The MCU can coordinate an Ethernet physical interface, isolated communications, status indicators, and local control. Place high-speed communications circuitry away from sensitive analog inputs, provide multiple decoupling capacitors at the specified supply pins, and confirm that the selected S70 variant supports every required Ethernet or industrial-protocol peripheral and pin function.

📺

High-End Human-Machine Interface

The ATSAMS70Q19A-AN can serve as the central controller in a high-end human-machine interface because 512 KB of Flash accommodates graphics resources, configuration data, and application firmware, while the Cortex-M7 core handles responsive touch and display updates. Its 144-pin LQFP package offers more I/O than a compact microcontroller package for buttons, encoders, indicators, and external memory. Use dedicated serial or parallel display drivers where appropriate, isolate display-bus routing from clock-sensitive circuitry, and confirm pin multiplexing in the manufacturer tables. Firmware should also include debouncing, display fault recovery, and communication timeout handling for reliable operator interaction.

🎧

Audio Processing and Amplifier Control

The ATSAMS70Q19A-AN suits audio system supervisory and processing roles where the 300 MHz Cortex-M7 core and integrated floating-point unit can support filters, mixing, effect control, and communication alongside system management. Its 256 KB of SRAM reduces pressure on external memory for sample buffers and control state. The MCU can supervise a class-D audio amplifier, monitor fault signals, and manage volume or codec control through serial interfaces. Use the pin-description tables to select codec and amplifier interfaces, keep sensitive analog traces away from high-current switching paths, and test idle-pop, clipping, thermal shutdown, and fault-recovery behavior as a complete audio subsystem.

🔧

Test and Measurement Instrument

The ATSAMS70Q19A-AN is well suited to sophisticated test and measurement equipment because its 300 MHz Cortex-M7 core can coordinate acquisition, signal processing, calibration, and a communications interface. The 512 KB of Flash accommodates firmware and lookup data, and 256 KB of SRAM can support real-time processing buffers. It can manage an external ADC or DAC, precision clocking, front-panel controls, and a host interface. Separate analog and digital return paths carefully, provide clean references and low-noise local regulation, and calibrate timing channels against the device clock. Confirm external-interface electrical limits and acquisition accuracy independently of the MCU specifications.

🎥

Embedded Graphics and Imaging Controller

The ATSAMS70Q19A-AN can support embedded imaging and graphics functions because its high-performance Cortex-M7 core, floating-point unit, and 256 KB of SRAM provide more computation and working memory than conventional small-format controllers. A typical design uses the MCU to capture camera or sensor data, execute image processing, and drive a display or network interface. The 144-pin LQFP package provides additional peripheral and bus options for external memory or displays. Route high-speed interfaces with controlled impedance and return paths, keep sensor and display power separate from digital switching nodes, and verify DMA, cache, and memory-bandwidth requirements under the intended workload before finalizing the architecture.

What is the ATSAMS70Q19A-AN?
The ATSAMS70Q19A-AN is a 32-bit ARM Cortex-M7 flash microcontroller with a 300 MHz maximum operating frequency, 512 KB of Flash, 256 KB of SRAM, and an integrated Floating Point Unit. According to the Microchip ATSAMS70Q19 product page, it belongs to the SAM S70 family and is intended for high-performance embedded applications requiring substantial processing and memory resources.
What are the key specifications of ATSAMS70Q19A-AN?
The principal ATSAMS70Q19A-AN specifications are a 300 MHz Cortex-M7 core, 512 KB of Flash memory, 256 KB of SRAM, an integrated floating-point unit, and a 144-pin LQFP package. Microchip describes the device as a high-performance 32-bit Cortex-M7 member of the SAM S70 family. These figures place it between conventional 8- and 16-bit controllers and more complex application processors.
What is the operating voltage of ATSAMS70Q19A-AN?
The ATSAMS70Q19A-AN operates from 1.08 V to 3.6 V. This supply range is reported for the exact ordered device and is important for systems that cannot provide a conventional 5 V rail directly. The manufacturer pin and power-supply tables should be used when assigning input, output, analog, and core supply pins on the PCB.
Where can I download the ATSAMS70Q19A-AN datasheet PDF?
The ATSAMS70Q19A-AN datasheet and supporting documents are available through the Microchip ATSAMS70Q19 product page at https://www.microchip.com/en-us/product/ATSAMS70Q19. Use the ordering-information section to confirm that ATSAMS70Q19A-AN corresponds to the 144-pin LQFP configuration, then consult the pinout, electrical characteristics, and package drawings before PCB release.
Where can I find the ATSAMS70Q19A-AN pinout?
The authoritative ATSAMS70Q19A-AN pinout is in the package and pin-description tables on the Microchip ATSAMS70Q19 product page. The device uses a 144-pin LQFP package, but the signal assigned to each lead can depend on the device variant and multiplexing configuration. Use those tables to map power, ground, clocks, debug signals, and peripherals.
Is ATSAMS70Q19A-AN suitable for industrial control?
The ATSAMS70Q19A-AN is suitable for performance-oriented industrial control when the design requires a 300 MHz Cortex-M7 core, 256 KB of SRAM, and a large pin count. Its processing headroom supports complex control algorithms, communications stacks, and data logging, while the LQFP package exposes more I/O than smaller microcontroller packages.
Where can I buy ATSAMS70Q19A-AN online?
Use the Request a Quote form on this page to request ATSAMS70Q19A-AN availability, lead time, and order quantities. The exact ordering code includes the 144-pin LQFP package and tray-style package suffix, so confirm the full MPN before ordering to avoid mismatched mechanical or temperature-grade variants.
What is the price of ATSAMS70Q19A-AN?
Request the current ATSAMS70Q19A-AN price through the Request a Quote form on this page. The quote should reflect the exact MPN, package suffix, desired quantity, and any traceability requirements. This avoids relying on a stale marketplace figure that may correspond to a different temperature grade, packing method, or package variant.
What is the lead time and stock status for ATSAMS70Q19A-AN?
Request current ATSAMS70Q19A-AN stock, minimum order quantity, and lead time through the Request a Quote form on this page. Availability should be confirmed for the complete ordering code because tray and tape-and-reel suffixes can have different logistics. Production schedules should also allow sufficient allocation time for the 144-pin LQFP assembly.
ATSAMS70Q19A-AN vs ATSAME70Q19A-AN: which is better?
The ATSAMS70Q19A-AN and ATSAME70Q19A-AN both appear as 300 MHz Cortex-M7 devices in 144-pin LQFP packages, with the E70 comparison result identifying 512 KB of Flash. They are not interchangeable merely because these headline ratings match. Compare peripheral mapping, interrupt structure, memory organization, power architecture, and board-level pin requirements before selecting one.
What is the difference between ATSAMS70Q19A-AN and ATSAMS70Q21A-AN?
Both parts use the 300 MHz Cortex-M7 architecture and a 144-pin LQFP configuration, but their memory resources and peripheral options differ. The ATSAMS70Q19A-AN is identified with 512 KB of Flash and 256 KB of SRAM. Select the ATSAMS70Q21A-AN only after checking its memory capacity, pin functions, timing, and software-support requirements against the existing design.
When should I choose ATSAMS70Q19A-AN over ATSAMS70Q20A-AN?
Choose the ATSAMS70Q19A-AN when its 512 KB of Flash, 256 KB of SRAM, and 300 MHz Cortex-M7 performance satisfy the application without requiring the additional resources associated with the ATSAMS70Q20A-AN. The deciding factors should be software compatibility, peripheral requirements, memory use, and the exact pinout—not clock frequency alone, because both parts target the high-performance SAM S70 class.
Is ATSAMS70Q19A-AN suitable for audio and communications control?
The ATSAMS70Q19A-AN can serve as the main controller in audio, communications, or test equipment because it combines a 300 MHz Cortex-M7 core, integrated floating-point unit, 512 KB of Flash, and 256 KB of SRAM. These resources allow protocol handling and control functions to coexist. External audio or radio interfaces still require suitable companion circuitry and verified pin multiplexing.
What can replace ATSAMS70Q19A-AN?
The closest evaluated replacements are Microchip ATSAME70Q19A-AN, ATSAMS70Q21A-AN, ATSAME70Q21A-AN, ATSAMS70Q20A-AN, and ATSAME70Q20A-AN, all considered against the 144-pin LQFP footprint. A candidate is only a drop-in choice after confirming pin functions, memory map, peripheral compatibility, clocking, startup behavior, and firmware support.
Is ATSAMS70Q19A-AN the same as ATSAMS70Q19A-ANT?
No. ATSAMS70Q19A-AN and ATSAMS70Q19A-ANT share the base ATSAMS70Q19A device and 144-pin LQFP package, but the final suffix identifies different order configurations, commonly tray versus tape-and-reel packing. Confirm the manufacturer's ordering-information table before treating them as mechanically identical procurement options.
Is ATSAMS70Q19A-AN RoHS compliant?
Yes, the ATSAMS70Q19A-AN is identified as RoHS compliant. RoHS addresses restricted substances in electronic products, while separate controls such as REACH, halogen-free status, conflict-minerals reporting, and automotive qualification may require their own documentation. Request the relevant declarations for the exact ordering code when compliance evidence is required.
What tools and firmware support ATSAMS70Q19A-AN?
The ATSAMS70Q19A-AN is supported within the Microchip SAM S70 ecosystem, including the ATSAMS70Q19 family documentation, pin and package tables, and Microchip development resources for Cortex-M7 devices. Confirm toolchain, debugger, boot, and middleware support for the exact family revision in current Microchip documentation before freezing the production firmware configuration.

Data referensi kejuruteraan untuk ATSAMS70Q19A-AN — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ATSAMS70Q19A-AN when a design needs the 300 MHz Cortex-M7 architecture, 512 KB of Flash, 256 KB of SRAM, and a 144-pin LQFP footprint. It is especially suitable for industrial control, communications nodes, test equipment, audio supervision, and embedded graphics. ATSAME70Q19A-AN is a close architectural alternative when its E70 peripheral set better matches the design, but the pin map and firmware must be revalidated. ATSAMS70Q21A-AN or ATSAME70Q21A-AN make sense when their additional memory resources are justified. ATSAMS70Q20A-AN and ATSAME70Q20A-AN are appropriate only after confirming that the required Flash, SRAM, peripherals, clocks, and pin multiplexing align. For every replacement, treat the shared 144-pin LQFP outline as a mechanical starting point rather than proof of drop-in equivalence, and verify supply sequencing, debugger connectivity, boot behavior, peripheral instances, and thermal performance.

Perbandingan dengan Gantian

Parametr Produk Ini ATSAME70Q19A-AN ATSAMS70Q21A-AN ATSAME70Q21A-AN ATSAMS70Q20A-AN ATSAME70Q20A-AN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 144-pin LQFP (20 mm x 20 mm) 144-pin LQFP (20 mm x 20 mm) 144-pin LQFP (20 mm x 20 mm) 144-pin LQFP (20 mm x 20 mm) 144-pin LQFP (20 mm x 20 mm) 144-pin LQFP (20 mm x 20 mm)
Processor Core 32-bit ARM Cortex-M7 with FPU 32-bit ARM Cortex-M7 with FPU 32-bit ARM Cortex-M7 with FPU 32-bit ARM Cortex-M7 with FPU 32-bit ARM Cortex-M7 with FPU 32-bit ARM Cortex-M7 with FPU
Maximum CPU Frequency 300 MHz 300 MHz 300 MHz 300 MHz 300 MHz 300 MHz
Product Family SAM S70 SAM E70 SAM S70 SAM E70 SAM S70 SAM E70

Penyeberangsung Jelas

  • High-performance Cortex-M7 core with floating-point unit (vsATSAMS70Q21A-AN)
  • Large 144-pin LQFP interface (vsATSAME70Q19A-AN)
  • Direct S70-family software alignment (vsATSAME70Q20A-AN)
  • 3.6 V maximum supply operation (vsATSAME70Q19A-AN)

Catatan Desain

Use the manufacturer pinout and package drawing for the 144-lead LQFP layout, including thermal-pad, exposed-pad, or lead-finish requirements where applicable. Keep decoupling capacitors adjacent to the specified supply pins, provide clean ground-plane return paths, and route high-speed interfaces away from analog inputs. Verify courtyard clearance, solder-mask definition, and assembly orientation against the current package drawing before releasing the Gerber files.

Plan the 1.08 V to 3.6 V operating range across startup, transients, and maximum processor activity. Use separate filtering or regulation paths for sensitive analog and digital supplies where the board requires it, and place bulk energy storage near the load rather than only at the power-entry point. Confirm bypass values, sequencing requirements, and operating limits in the electrical characteristics and power-supply diagrams for the exact device.

Do not treat a shared LQFP footprint as proof of drop-in firmware or pin compatibility. The S70 and E70 families can differ in peripheral mapping, interrupt organization, memory behavior, and pin multiplexing. For every proposed replacement, compare the complete pin-description table, peripheral instance numbers, power pins, clock pins, debugger signals, and startup requirements; then recompile and retest the production firmware.

The 300 MHz Cortex-M7 core and 256 KB of SRAM can create more switching activity than a low-power microcontroller, so thermal performance depends on the PCB environment. Follow the manufacturer's operating-temperature and current guidelines, minimize thermal barriers around the package, and provide adequate copper area. For sustained high-performance operation, evaluate ambient temperature, board construction, airflow, and adjacent heat sources rather than relying on the nominal clock rate alone.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

RoHS compliance is identified for the exact device. Additional declarations require confirmation from current Microchip compliance documentation.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ATSAMS70Q19A-AN ATSAMS70Q19A-AN datasheet ATSAMS70Q19A-AN datasheet pdf ATSAMS70Q19A-AN pinout ATSAMS70Q19A-AN specifications ATSAMS70Q19A-AN equivalent ATSAMS70Q19A-AN replacement ATSAMS70Q19A-AN cross reference ATSAMS70Q19A-AN vs ATSAME70Q19A-AN ATSAMS70Q19A-AN LQFP-144 ATSAMS70Q19A-AN price ATSAMS70Q19A-AN stock

Komponen dan Tanda berkaitan

Microchip Technology ATSAMS70Q19A-AN ATSAMS70Q19 ATSAME70Q19A-AN ATSAMS70Q21A-AN ATSAME70Q21A-AN ATSAMS70Q20A-AN ATSAME70Q20A-AN SAM S70 SAM E70 ARM Cortex-M7 32-bit RISC microcontroller Flash microcontroller embedded microcontroller semiconductor floating-point unit FPU LQFP-144 LQFP package family surface-mount package industrial automation real-time communications test and measurement embedded graphics
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ