ATSAMS70Q19A-AN - 300MHz Cortex-M7 MCU | Microchip
MPN: ATSAMS70Q19A-AN ✓ Hoạt độngATSAMS70Q19A-AN Tóm tắt
A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile working memory, peripherals, and communication interfaces. The ATSAMS70 belongs to the SAM S70 family, a 32-bit embedded-control hierarchy built around the ARM Cortex-M7 architecture. Compared with an 8- or 16-bit MCU, this device supports larger firmware, richer real-time workloads, and substantially greater arithmetic throughput.
Key device attributes include a 300 MHz maximum operating frequency, 512 KB of Flash, and 256 KB of SRAM. According to Microchip, the device uses a high-performance 32-bit ARM Cortex-M7 processor with a Floating Point Unit. The combination is useful for control loops that must remain responsive while executing protocol stacks, image processing, or floating-point calculations. Its 144-pin LQFP package also provides a comparatively high peripheral count for demanding embedded systems.
The product is based on the Cortex-M7 architecture and includes a floating-point unit, enabling efficient single- and double-precision arithmetic alongside general-purpose embedded control. This architecture is suitable when an application must combine deterministic peripheral access with higher-level computation, but a more complex application processor is unnecessary. Its large memory footprint helps separate application code, graphics data, communications buffers, and real-time workloads.
Typical ATSAMS70Q19A-AN applications include industrial automation, connected industrial equipment, high-end human-machine interfaces, audio and communications control, test and measurement systems, and embedded graphics or control nodes. The 300 MHz Cortex-M7 core provides processing headroom for EtherCAT or similar industrial communication duties, while the SRAM capacity can reduce pressure from external memory in data-intensive control systems.
Designers should verify the exact pin assignments, power rails, decoupling requirements, clock configuration, and peripheral multiplexing in the Microchip pin-description tables before laying out the PCB. The 144-pin LQFP footprint requires careful escape routing, and firmware should be tested for the intended operating temperature, supply range, and peripheral combinations rather than relying only on the processor headline frequency.
This product page combines the manufacturer's architectural description with practical selection, application, packaging, and drop-in replacement guidance. It focuses attention on the factors that determine PCB compatibility and firmware fit: the 144-lead LQFP footprint, Cortex-M7 core, memory capacity, package suffix, and family-specific peripheral behavior.
Bộ thay thế dễ dàng lắp đặt cho ATSAMS70Q19A-AN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATSAMS70Q19A-AN (cùng hình factor và footprint) — khác nhau ở Flash Memory, ADC, SRAM, Package, CAN.
ATSAME70Q19A-AN
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAMS70Q21A-AN
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATSAME70Q21A-AN
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAMS70Q20A-AN
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ATSAME70Q20A-AN
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ATSAMS70Q19A-AN Tỷ lệ tối đa & tính chất điện
| Processor Core | 32-bit ARM Cortex-M7 with Floating Point Unit |
| Maximum CPU Frequency | 300 MHz |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 256 KB |
| Architecture | 32-bit RISC |
| Product Family | SAM S70 |
| Supply Voltage Range | 1.08 V to 3.6 V |
| Package Type | 144-pin LQFP |
| Package Dimensions | 20 mm x 20 mm |
| Kiểu lắp đặt | Surface Mount |
| Terminal Count | 144 terminals |
| FPU | Integrated single- and double-precision floating-point unit |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân ATSAMS70Q19A-AN 20 mm x 20 mm
Cấu hình chân cho ATSAMS70Q19A-AN (20 mm x 20 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATSAMS70Q19A-AN.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATSAMS70Q19A-AN phù hợp cho 6 Áp dụngs: Industrial Automation Controller, EtherCAT or Real-Time Communications Node, High-End Human-Machine Interface, Audio Processing and Amplifier Control, Test and Measurement Instrument, Embedded Graphics and Imaging Controller.
Industrial Automation Controller
The ATSAMS70Q19A-AN fits industrial automation controllers that must execute motion control, diagnostics, communications, and supervisory logic on one processor. Its 300 MHz Cortex-M7 core provides substantially more headroom than an 8- or 16-bit controller, while 256 KB of SRAM supports working buffers and communication queues. The 512 KB of Flash can hold control firmware, parameter tables, and diagnostics. Place the MCU beside the power conversion and signal-conditioning stages, then assign its pins according to the exact S70 multiplexing tables. Validate the control-loop timing, external interface timing, watchdog behavior, and industrial temperature range before production deployment.
Được đề xuất
EtherCAT or Real-Time Communications Node
The ATSAMS70Q19A-AN is appropriate for a real-time communications node because the 300 MHz Cortex-M7 core can execute protocol processing alongside deterministic control tasks, and 256 KB of SRAM provides room for buffers. A floating-point unit can accelerate signal calculations without a separate accelerator. The MCU can coordinate an Ethernet physical interface, isolated communications, status indicators, and local control. Place high-speed communications circuitry away from sensitive analog inputs, provide multiple decoupling capacitors at the specified supply pins, and confirm that the selected S70 variant supports every required Ethernet or industrial-protocol peripheral and pin function.
Được đề xuất
High-End Human-Machine Interface
The ATSAMS70Q19A-AN can serve as the central controller in a high-end human-machine interface because 512 KB of Flash accommodates graphics resources, configuration data, and application firmware, while the Cortex-M7 core handles responsive touch and display updates. Its 144-pin LQFP package offers more I/O than a compact microcontroller package for buttons, encoders, indicators, and external memory. Use dedicated serial or parallel display drivers where appropriate, isolate display-bus routing from clock-sensitive circuitry, and confirm pin multiplexing in the manufacturer tables. Firmware should also include debouncing, display fault recovery, and communication timeout handling for reliable operator interaction.
Được đề xuất
Audio Processing and Amplifier Control
The ATSAMS70Q19A-AN suits audio system supervisory and processing roles where the 300 MHz Cortex-M7 core and integrated floating-point unit can support filters, mixing, effect control, and communication alongside system management. Its 256 KB of SRAM reduces pressure on external memory for sample buffers and control state. The MCU can supervise a class-D audio amplifier, monitor fault signals, and manage volume or codec control through serial interfaces. Use the pin-description tables to select codec and amplifier interfaces, keep sensitive analog traces away from high-current switching paths, and test idle-pop, clipping, thermal shutdown, and fault-recovery behavior as a complete audio subsystem.
Được đề xuất
Test and Measurement Instrument
The ATSAMS70Q19A-AN is well suited to sophisticated test and measurement equipment because its 300 MHz Cortex-M7 core can coordinate acquisition, signal processing, calibration, and a communications interface. The 512 KB of Flash accommodates firmware and lookup data, and 256 KB of SRAM can support real-time processing buffers. It can manage an external ADC or DAC, precision clocking, front-panel controls, and a host interface. Separate analog and digital return paths carefully, provide clean references and low-noise local regulation, and calibrate timing channels against the device clock. Confirm external-interface electrical limits and acquisition accuracy independently of the MCU specifications.
Được đề xuất
Embedded Graphics and Imaging Controller
The ATSAMS70Q19A-AN can support embedded imaging and graphics functions because its high-performance Cortex-M7 core, floating-point unit, and 256 KB of SRAM provide more computation and working memory than conventional small-format controllers. A typical design uses the MCU to capture camera or sensor data, execute image processing, and drive a display or network interface. The 144-pin LQFP package provides additional peripheral and bus options for external memory or displays. Route high-speed interfaces with controlled impedance and return paths, keep sensor and display power separate from digital switching nodes, and verify DMA, cache, and memory-bandwidth requirements under the intended workload before finalizing the architecture.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATSAMS70Q19A-AN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATSAME70Q19A-AN | ATSAMS70Q21A-AN | ATSAME70Q21A-AN | ATSAMS70Q20A-AN | ATSAME70Q20A-AN |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-pin LQFP (20 mm x 20 mm) | 144-pin LQFP (20 mm x 20 mm) | 144-pin LQFP (20 mm x 20 mm) | 144-pin LQFP (20 mm x 20 mm) | 144-pin LQFP (20 mm x 20 mm) | 144-pin LQFP (20 mm x 20 mm) |
| Processor Core | 32-bit ARM Cortex-M7 with FPU | 32-bit ARM Cortex-M7 with FPU | 32-bit ARM Cortex-M7 with FPU | 32-bit ARM Cortex-M7 with FPU | 32-bit ARM Cortex-M7 with FPU | 32-bit ARM Cortex-M7 with FPU |
| Maximum CPU Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
| Product Family | SAM S70 | SAM E70 | SAM S70 | SAM E70 | SAM S70 | SAM E70 |
Bảo phân biệt quan trọng
- High-performance Cortex-M7 core with floating-point unit (vsATSAMS70Q21A-AN)
- Large 144-pin LQFP interface (vsATSAME70Q19A-AN)
- Direct S70-family software alignment (vsATSAME70Q20A-AN)
- 3.6 V maximum supply operation (vsATSAME70Q19A-AN)
Ghi chú thiết kế
Use the manufacturer pinout and package drawing for the 144-lead LQFP layout, including thermal-pad, exposed-pad, or lead-finish requirements where applicable. Keep decoupling capacitors adjacent to the specified supply pins, provide clean ground-plane return paths, and route high-speed interfaces away from analog inputs. Verify courtyard clearance, solder-mask definition, and assembly orientation against the current package drawing before releasing the Gerber files.
Plan the 1.08 V to 3.6 V operating range across startup, transients, and maximum processor activity. Use separate filtering or regulation paths for sensitive analog and digital supplies where the board requires it, and place bulk energy storage near the load rather than only at the power-entry point. Confirm bypass values, sequencing requirements, and operating limits in the electrical characteristics and power-supply diagrams for the exact device.
Do not treat a shared LQFP footprint as proof of drop-in firmware or pin compatibility. The S70 and E70 families can differ in peripheral mapping, interrupt organization, memory behavior, and pin multiplexing. For every proposed replacement, compare the complete pin-description table, peripheral instance numbers, power pins, clock pins, debugger signals, and startup requirements; then recompile and retest the production firmware.
The 300 MHz Cortex-M7 core and 256 KB of SRAM can create more switching activity than a low-power microcontroller, so thermal performance depends on the PCB environment. Follow the manufacturer's operating-temperature and current guidelines, minimize thermal barriers around the package, and provide adequate copper area. For sustained high-performance operation, evaluate ambient temperature, board construction, airflow, and adjacent heat sources rather than relying on the nominal clock rate alone.
Thông tin tuân thủ
RoHS compliance is identified for the exact device. Additional declarations require confirmation from current Microchip compliance documentation.