ATXMEGA128B1-AU 32MHz 128KB Flash MCU | Microchip
MPN: ATXMEGA128B1-AU ✓ AktifATXMEGA128B1-AU Ringkasan
An 8/16-bit microcontroller is a programmable semiconductor that executes embedded control instructions using an internal CPU, nonvolatile memory, and peripheral interfaces. The AVR XMEGA family combines a Harvard-style memory architecture, high-speed execution, and event-oriented peripherals in a single device. Within the embedded hierarchy, it sits above simple 8-bit controllers because its 16-bit-oriented AVR architecture supports up to 32 MIPS while retaining byte-oriented programming compatibility.
The ATXMEGA128B1-AU includes a two-channel DMA controller, a four-channel event system, and a USB Full-Speed device controller. Its memory organization includes 128 KB Flash, 8 KB SRAM, and 2 KB EEPROM, while the LCD interface supports up to 4 x 40 segments. These resources allow firmware movement between memory regions and coordinated handling of events without excessive processor intervention.
Up to 53 I/O pins provide access to communication, timer, analog, and general-purpose digital functions. The 100-TQFP arrangement makes the device suitable for compact embedded boards that require extensive peripheral connectivity without using a very large fine-pitch package. Operating voltage options shown for this device include 1.8 V, 2.5 V, and 3.3 V, supporting integration with low-voltage sensors, communications transceivers, and USB interface circuitry.
Typical uses include USB-connected data acquisition, industrial control modules, human-machine interfaces, low-power embedded instruments, and segmented LCD equipment. The DMA controller and event system are especially useful when data acquisition, display updates, and communication must coexist with deterministic control-loop execution. The 32 MHz maximum clock rate provides additional timing margin for protocol handling and signal processing.
PCB design should preserve short return paths around decoupling capacitors and provide clean routing for USB and clock signals. Firmware development should account for the dedicated boot-code section, interrupt-driven event handling, and peripheral contention between DMA, USB, timers, and the LCD controller. Confirm the exact pin multiplexing, clock configuration, and peripheral availability against the manufacturer datasheet before finalizing a board.
This page combines the manufacturer product overview with practical memory, peripheral, package, and sourcing guidance. It also identifies verified same-package alternatives and explains where firmware, timing, or temperature-grade differences must be reviewed before making a replacement decision.
Pilihan pengganti yang segera untuk ATXMEGA128B1-AU — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera ATXMEGA128B1-AU (sama faktor bentuk dan kaki) — berbeza dalam DMA Channels, Event System Channels, General-Purpose I/O Pins, Package, RoHS Status.
ATXMEGA128B1-AN
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ATXMEGA128D3-AU
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ATXMEGA128A1-AU
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATXMEGA128B1-AU Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8/16-bit AVR XMEGA B1 microcontroller |
| Frekuensi Klock Maksimum | 32 MHz |
| Maximum CPU Throughput | Up to 32 MIPS |
| Program Memory | 128 KB Flash |
| Boot Code Section | 8 KB |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| General-Purpose I/O Pins | 53 pins |
| DMA Channels | 2 channels |
| Event System Channels | 4 channels |
| USB Interface | USB Full-Speed device |
| LCD Controller | Up to 4 x 40 segments |
| Operating Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| Kemasan | 100-pin TQFP, 14 x 14 mm |
| Jenis Pemasangan | Surface mount |
| Packaging | Tray |
| Architecture | AVR XMEGA 8/16-bit |
| Program Memory Type | In-system self-programmable Flash |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Panduan Konfigurasi Pin ATXMEGA128B1-AU 100-pin tqfp, 14 x 14 mm
Konfigurasi pin untuk ATXMEGA128B1-AU (100-pin tqfp, 14 x 14 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk ATXMEGA128B1-AU.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ATXMEGA128B1-AU patut untuk 6 aplikasis: USB Data Acquisition, Industrial Control Module, Segmented LCD Human-Machine Interface, Low-Power Sensor Node, USB Communication Adapter, Embedded Test and Measurement Instrument.
USB Data Acquisition
The ATXMEGA128B1-AU fits USB-connected measurement systems because it combines a USB Full-Speed device controller with a 32 MHz AVR processor and 128 KB of self-programmable Flash. Its two-channel DMA controller can move sampled data between memory regions with limited CPU involvement, while the four-channel event system can coordinate triggers and timing events. This architecture is useful for portable instruments that transfer sensor data to a host computer without requiring a separate USB interface controller. The implementation should use short USB traces, solid ground-plane continuity, and correctly selected USB-series impedance routing. Firmware must also coordinate USB interrupts with DMA access to avoid corrupting transfers while data is being processed.
Disebarkan
Industrial Control Module
The ATXMEGA128B1-AU supports compact industrial control modules that need substantial I/O, local event handling, and flexible communication. Its 53 general-purpose I/O pins can connect digital inputs, outputs, status indicators, and external interface circuits, while the 128 KB Flash provides room for protocol stacks and application logic. The two DMA channels are useful when sensor or actuator traffic must continue during display servicing or host communication. Operating-voltage options of 1.8 V, 2.5 V, and 3.3 V allow the controller to share power domains with appropriate transceivers. Designers should confirm temperature requirements, isolation strategy, grounding, and transient protection before using the device in industrial environments.
Disebarkan
Segmented LCD Human-Machine Interface
The ATXMEGA128B1-AU is well suited to human-machine interfaces based on segmented LCDs because it includes a controller capable of driving up to 4 x 40 segments. At the same time, the device retains 53 I/O pins for buttons, indicators, communication ports, and configuration inputs. Its 32 MHz execution rate allows the firmware to update the display while responding to events and maintaining a USB or serial control link. The integrated event system can help synchronize display updates with user activity or sampled process data. Designers should follow the manufacturer LCD timing and bias requirements, allow adequate settling time for the glass, and separate display drive currents from sensitive analog circuitry where practical.
Disebarkan
Low-Power Sensor Node
The ATXMEGA128B1-AU can serve as the central controller in a low-power sensor node that gathers digital measurements and communicates through USB or another peripheral interface. Its selectable 1.8 V, 2.5 V, and 3.3 V operating options support low-voltage sensor ecosystems, and the event system can coordinate periodic sampling with communication activity. The two DMA channels reduce processor involvement during transfers, helping preserve responsiveness when the node also manages local controls. Firmware should use the device’s low-power modes during idle intervals, disable unused peripherals, and maintain stable regulator sequencing. PCB layout should place decoupling capacitors close to supply pins and provide a quiet return path for analog sensor connections.
Disebarkan
USB Communication Adapter
The ATXMEGA128B1-AU is appropriate for compact protocol adapters that translate between a host USB connection and embedded serial, control, or data-acquisition circuitry. The USB Full-Speed device controller removes the need for a separate USB transceiver or host controller, while 8 KB of SRAM supports buffering and the 128 KB Flash accommodates protocol and configuration logic. DMA can accelerate transfers between peripheral peripherals and memory, reducing the processing burden during continuous data movement. A robust adapter also needs ESD protection, controlled cable or connector design, firmware enumeration support, and verification of the USB operating-current budget. The exact 100-pin land pattern must be used during PCB layout.
Disebarkan
Embedded Test and Measurement Instrument
The ATXMEGA128B1-AU fits embedded test and measurement instruments that combine local control, event-driven acquisition, and USB reporting. Its 32 MHz throughput provides useful margin for timing routines, communication protocols, and data processing, while the event system can coordinate triggers across timers and external events. The two-channel DMA controller is valuable when acquisition must continue while results are transmitted or displayed. The broad I/O count allows connection to sensors, relay drivers, status LEDs, and front-panel controls without requiring a separate programmable logic device. For accurate analog measurements, keep the MCU power and clock references separated from sensitive front ends, and follow the manufacturer’s recommended grounding and decoupling layout.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ATXMEGA128B1-AU — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ATXMEGA128B1-AN | ATXMEGA128D3-AU | ATXMEGA128A1-AU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (14x14) | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same |
| Product Family | AVR XMEGA B1 | AVR XMEGA B1 | AVR XMEGA D3 | AVR XMEGA A1 |
| Program Memory | 128 KB Flash | 128 KB Flash | 128 KB Flash | 128 KB Flash |
Penyeberangsung Jelas
- Closest same-package temperature-grade alternative (vsATXMEGA128B1-AN)
- Substantial integrated peripheral set (vsATXMEGA128A1-AU)
- 32 MHz processing rate with 128 KB Flash (vsATXMEGA128D3-AU)
Catatan Desain
Place the required input and output decoupling capacitors directly beside their corresponding supply and ground pins, following the manufacturer layout and component-selection guidance. Keep the USB data-pair routing short, continuous, and over a continuous ground plane. The 100-pin TQFP lead pitch also requires careful footprint verification: confirm pin-1 orientation, exposed-pad requirements if applicable, solder-mask clearance, and paste volume before releasing the PCB artwork.
The device supports 1.8 V, 2.5 V, and 3.3 V operation, but the selected supply must satisfy the voltage, clock, and USB requirements for the complete design. Sequence rails consistently with the USB interface circuitry and avoid operating peripherals outside their permitted voltage ranges. If the board also includes sensors or transceivers, budget their current together with the MCU rather than sizing the regulator from the MCU name alone.
Use the event system and DMA channels to separate timed sampling from buffer movement, but ensure each peripheral’s event routing and channel assignment is checked against the device documentation. Review interrupt priority, DMA arbitration, and memory contention in firmware. For designs involving external precision references or analog front ends, maintain quiet return paths and avoid routing clock or high-current switching nodes beneath sensitive analog sections.
Maklumat Kesediaan
Compliance status has not been established for the exact ordering code. Confirm current environmental, automotive, and material declarations with Microchip Technology before production release.