Microchip Technology

ATXMEGA128B1-AU 32MHz 128KB Flash MCU | Microchip

Артикул: ATXMEGA128B1-AU ✓ Активен
1.8 V, 2.5 V, and 3.3 V Vdss 100-pin TQFP, 14 x 14 mm Package 32 MHz Speed 128 KB Flash Memory
MOQ: 1 |

ATXMEGA128B1-AU Обзор

The Microchip Technology ATXMEGA128B1-AU is a low-power 8/16-bit AVR XMEGA B1 microcontroller operating at up to 32 MHz, with 128 KB of self-programmable Flash memory and a 100-pin TQFP package measuring 14 x 14 mm. The device provides 8 KB SRAM, a 2 KB boot-code section, and 2 KB EEPROM for firmware, boot code, and persistent data.

An 8/16-bit microcontroller is a programmable semiconductor that executes embedded control instructions using an internal CPU, nonvolatile memory, and peripheral interfaces. The AVR XMEGA family combines a Harvard-style memory architecture, high-speed execution, and event-oriented peripherals in a single device. Within the embedded hierarchy, it sits above simple 8-bit controllers because its 16-bit-oriented AVR architecture supports up to 32 MIPS while retaining byte-oriented programming compatibility.

The ATXMEGA128B1-AU includes a two-channel DMA controller, a four-channel event system, and a USB Full-Speed device controller. Its memory organization includes 128 KB Flash, 8 KB SRAM, and 2 KB EEPROM, while the LCD interface supports up to 4 x 40 segments. These resources allow firmware movement between memory regions and coordinated handling of events without excessive processor intervention.

Up to 53 I/O pins provide access to communication, timer, analog, and general-purpose digital functions. The 100-TQFP arrangement makes the device suitable for compact embedded boards that require extensive peripheral connectivity without using a very large fine-pitch package. Operating voltage options shown for this device include 1.8 V, 2.5 V, and 3.3 V, supporting integration with low-voltage sensors, communications transceivers, and USB interface circuitry.

Typical uses include USB-connected data acquisition, industrial control modules, human-machine interfaces, low-power embedded instruments, and segmented LCD equipment. The DMA controller and event system are especially useful when data acquisition, display updates, and communication must coexist with deterministic control-loop execution. The 32 MHz maximum clock rate provides additional timing margin for protocol handling and signal processing.

PCB design should preserve short return paths around decoupling capacitors and provide clean routing for USB and clock signals. Firmware development should account for the dedicated boot-code section, interrupt-driven event handling, and peripheral contention between DMA, USB, timers, and the LCD controller. Confirm the exact pin multiplexing, clock configuration, and peripheral availability against the manufacturer datasheet before finalizing a board.

This page combines the manufacturer product overview with practical memory, peripheral, package, and sourcing guidance. It also identifies verified same-package alternatives and explains where firmware, timing, or temperature-grade differences must be reviewed before making a replacement decision.

Аналоги без доработки для ATXMEGA128B1-AU — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ATXMEGA128B1-AU (тот же форм-фактор и посадочное место) — отличается по DMA Channels, Event System Channels, General-Purpose I/O Pins, Package, RoHS Status.

Microchip Technology
DMA Channels: 4
Event System Channels: 8
General-Purpose I/O Pins: 78
Сравнить с ATXMEGA128B1-AU →

ATXMEGA128B1-AN

✅ Прямая замена
📦 100-TQFP (14x14)
Temperature-grade suffix changes from AU to AN while 128 KB Flash and 32 MHz architecture remain the same; environmental limits require verification.

📋 Справочный аналог (нет в каталоге)

ATXMEGA128D3-AU

✅ Прямая замена
📦 100-TQFP (14x14)
Uses the same 100-TQFP format and 128 KB Flash class, but the D3 device family has different clock and peripheral characteristics; operating-frequency and firmware differences must be checked.

📋 Справочный аналог (нет в каталоге)

ATXMEGA128A1-AU

✅ Прямая замена
Microchip Technology
📦 100-TQFP (14x14)
AVR XMEGA (enhanced RISC), 8/16-bit · 32 MHz max · 128 KB (64K x 16), in-system programmable with read-while-write · 8 KB · 8 KB · 2 KB · 1.6 V to 3.6 V · 78

Уточнить цену

Открыть даташит →

ATXMEGA128B1-AU Максимальные параметры и электрические характеристики

Product Type 8/16-bit AVR XMEGA B1 microcontroller
Максимальная тактовая частота 32 MHz
Maximum CPU Throughput Up to 32 MIPS
Program Memory 128 KB Flash
Boot Code Section 8 KB
SRAM 8 KB
EEPROM 2 KB
General-Purpose I/O Pins 53 pins
DMA Channels 2 channels
Event System Channels 4 channels
USB Interface USB Full-Speed device
LCD Controller Up to 4 x 40 segments
Operating Voltage Options 1.8 V, 2.5 V, and 3.3 V
Корпус 100-pin TQFP, 14 x 14 mm
Тип монтажа Surface mount
Packaging Tray
Architecture AVR XMEGA 8/16-bit
Program Memory Type In-system self-programmable Flash
Статус RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

Руководство по цоколевке ATXMEGA128B1-AU в корпусе 100-pin tqfp, 14 x 14 mm

Цоколевка для ATXMEGA128B1-AU (корпус 100-pin tqfp, 14 x 14 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 100-pin tqfp, 14 x 14 mm для ATXMEGA128B1-AU

Нет подробных данных о распиновке для ATXMEGA128B1-AU.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ATXMEGA128B1-AU подходит для 6 применениеs: USB Data Acquisition, Industrial Control Module, Segmented LCD Human-Machine Interface, Low-Power Sensor Node, USB Communication Adapter, Embedded Test and Measurement Instrument.

🖥️

USB Data Acquisition

The ATXMEGA128B1-AU fits USB-connected measurement systems because it combines a USB Full-Speed device controller with a 32 MHz AVR processor and 128 KB of self-programmable Flash. Its two-channel DMA controller can move sampled data between memory regions with limited CPU involvement, while the four-channel event system can coordinate triggers and timing events. This architecture is useful for portable instruments that transfer sensor data to a host computer without requiring a separate USB interface controller. The implementation should use short USB traces, solid ground-plane continuity, and correctly selected USB-series impedance routing. Firmware must also coordinate USB interrupts with DMA access to avoid corrupting transfers while data is being processed.

🏭

Industrial Control Module

The ATXMEGA128B1-AU supports compact industrial control modules that need substantial I/O, local event handling, and flexible communication. Its 53 general-purpose I/O pins can connect digital inputs, outputs, status indicators, and external interface circuits, while the 128 KB Flash provides room for protocol stacks and application logic. The two DMA channels are useful when sensor or actuator traffic must continue during display servicing or host communication. Operating-voltage options of 1.8 V, 2.5 V, and 3.3 V allow the controller to share power domains with appropriate transceivers. Designers should confirm temperature requirements, isolation strategy, grounding, and transient protection before using the device in industrial environments.

📺

Segmented LCD Human-Machine Interface

The ATXMEGA128B1-AU is well suited to human-machine interfaces based on segmented LCDs because it includes a controller capable of driving up to 4 x 40 segments. At the same time, the device retains 53 I/O pins for buttons, indicators, communication ports, and configuration inputs. Its 32 MHz execution rate allows the firmware to update the display while responding to events and maintaining a USB or serial control link. The integrated event system can help synchronize display updates with user activity or sampled process data. Designers should follow the manufacturer LCD timing and bias requirements, allow adequate settling time for the glass, and separate display drive currents from sensitive analog circuitry where practical.

🧩

Low-Power Sensor Node

The ATXMEGA128B1-AU can serve as the central controller in a low-power sensor node that gathers digital measurements and communicates through USB or another peripheral interface. Its selectable 1.8 V, 2.5 V, and 3.3 V operating options support low-voltage sensor ecosystems, and the event system can coordinate periodic sampling with communication activity. The two DMA channels reduce processor involvement during transfers, helping preserve responsiveness when the node also manages local controls. Firmware should use the device’s low-power modes during idle intervals, disable unused peripherals, and maintain stable regulator sequencing. PCB layout should place decoupling capacitors close to supply pins and provide a quiet return path for analog sensor connections.

🌐

USB Communication Adapter

The ATXMEGA128B1-AU is appropriate for compact protocol adapters that translate between a host USB connection and embedded serial, control, or data-acquisition circuitry. The USB Full-Speed device controller removes the need for a separate USB transceiver or host controller, while 8 KB of SRAM supports buffering and the 128 KB Flash accommodates protocol and configuration logic. DMA can accelerate transfers between peripheral peripherals and memory, reducing the processing burden during continuous data movement. A robust adapter also needs ESD protection, controlled cable or connector design, firmware enumeration support, and verification of the USB operating-current budget. The exact 100-pin land pattern must be used during PCB layout.

🔧

Embedded Test and Measurement Instrument

The ATXMEGA128B1-AU fits embedded test and measurement instruments that combine local control, event-driven acquisition, and USB reporting. Its 32 MHz throughput provides useful margin for timing routines, communication protocols, and data processing, while the event system can coordinate triggers across timers and external events. The two-channel DMA controller is valuable when acquisition must continue while results are transmitted or displayed. The broad I/O count allows connection to sensors, relay drivers, status LEDs, and front-panel controls without requiring a separate programmable logic device. For accurate analog measurements, keep the MCU power and clock references separated from sensitive front ends, and follow the manufacturer’s recommended grounding and decoupling layout.

What is the ATXMEGA128B1-AU?
The ATXMEGA128B1-AU is a Microchip Technology 8/16-bit AVR XMEGA B1 microcontroller rated for operation at up to 32 MHz. It combines 128 KB of self-programmable Flash, 8 KB SRAM, 2 KB EEPROM, 53 I/O pins, USB Full-Speed device support, a two-channel DMA controller, and a four-channel event system in a 100-pin TQFP package. The manufacturer product page identifies these resources as the defining features of the ATxmega128B1 family.
How much Flash and SRAM does ATXMEGA128B1-AU have?
The ATXMEGA128B1-AU provides 128 KB of Flash program memory, 8 KB of SRAM, and 2 KB of EEPROM. The manufacturer also identifies an 8 KB boot-code section for applications that need protected startup code or separate bootloader storage. These memory regions should be considered together when sizing an application, bootloader, display buffers, and communication working memory.
What is the maximum clock speed of ATXMEGA128B1-AU?
The ATXMEGA128B1-AU supports a maximum clock frequency of 32 MHz and can execute at up to 32 MIPS. This processing capability is useful for USB device firmware, event-driven acquisition, protocol handling, and control loops. Actual application performance also depends on the selected clock source, clock configuration, flash wait states, voltage, and firmware structure described in the manufacturer documentation.
Which peripherals are integrated into ATXMEGA128B1-AU?
The ATXMEGA128B1-AU integrates a USB Full-Speed device controller, two-channel DMA controller, four-channel event system, and an LCD controller capable of driving up to 4 x 40 segments. It also provides up to 53 general-purpose I/O pins. These peripherals make the device suitable for data-acquisition equipment, USB-connected controls, and human-machine interfaces requiring both display output and external connectivity.
What package does ATXMEGA128B1-AU use?
The ATXMEGA128B1-AU uses a 100-pin TQFP package measuring 14 x 14 mm. The package is surface mount and is supplied in a tray configuration. Because the device has 100 leads and numerous peripheral functions, board layout must follow the manufacturer pin-description and land-pattern tables exactly rather than relying on a generic TQFP footprint.
Where can I download the ATXMEGA128B1-AU datasheet?
The ATXMEGA128B1-AU datasheet and supporting documents can be obtained from the Microchip Technology ATxmega128B1 product page at https://www.microchip.com/en-us/product/ATxmega128B1. Use the manufacturer documents for the authoritative pin descriptions, electrical limits, clock setup, memory map, USB behavior, and package drawings. The Octopart datasheet page also links to manufacturer documentation for the exact ordering code.
Where can I find the ATXMEGA128B1-AU pinout?
The ATXMEGA128B1-AU pinout is documented in the pin-description and package drawings within the Microchip Technology device documentation. The exact ordering code uses a 100-pin TQFP arrangement, so pin 1 and counterclockwise numbering must be taken from the specific 14 x 14 mm package drawing. Use the pin-multiplexing table as well as the physical drawing because many peripheral functions can be assigned to the same external pin.
What can replace the ATXMEGA128B1-AU?
The closest documented same-package choices are the ATXMEGA128B1-AN and ATXMEGA128D3-AU, but neither should be treated as an unconditional firmware-compatible substitute. The ATXMEGA128B1-AN changes the environmental ordering grade while retaining the 128 KB, 32 MHz, 100-TQFP family identity. The ATXMEGA128D3-AU uses the same 100-pin format but requires review of its clock, peripheral, and firmware differences before substitution.
Is ATXMEGA128B1-AU pin-compatible with ATXMEGA128B1-AN?
The ATXMEGA128B1-AU and ATXMEGA128B1-AN are closely related 100-pin ATxmega128B1 devices, making the AN an appropriate candidate for a same-package design review. Their primary ordering distinction concerns the environmental grade rather than the 128 KB Flash and 32 MHz architecture. Engineers must still confirm operating-temperature requirements, device identification bits, programming settings, and all project-specific qualification constraints.
ATXMEGA128B1-AU vs ATXMEGA128D3-AU: which is better for a USB design?
The ATXMEGA128B1-AU is the stronger direct choice when a design specifically requires the documented USB Full-Speed device controller together with the 128 KB Flash configuration. The ATXMEGA128D3-AU offers the same 100-TQFP format and 128 KB Flash class, but USB availability and peripheral behavior must be confirmed for that ordering code. Existing USB firmware should not be transferred without checking clocks, interrupts, pins, and register differences.
When should I choose ATXMEGA128B1-AU over ATXMEGA128B1-AN?
Choose the ATXMEGA128B1-AU when its specified operating-temperature grade matches the product’s environmental requirements. Choose the ATXMEGA128B1-AN when the design needs the higher industrial temperature capability associated with that ordering suffix. Both are 100-pin, 32 MHz devices with 128 KB Flash, so the decision should focus on temperature grade, qualification, lifecycle, and procurement rather than package conversion.
Is ATXMEGA128B1-AU suitable for USB data acquisition?
The ATXMEGA128B1-AU is suitable for USB Full-Speed data-acquisition systems because it integrates a USB device controller, 32 MHz processing capability, 8 KB SRAM, DMA, and an event system. The event system can coordinate timing-sensitive sources while DMA transfers data without involving the CPU for every byte. The system still needs careful USB routing, decoupling, firmware scheduling, and input-protection design.
What are the key specifications of ATXMEGA128B1-AU that engineers should know?
The key ATXMEGA128B1-AU specifications are 32 MHz maximum clock speed, up to 32 MIPS throughput, 128 KB self-programmable Flash, 8 KB SRAM, 2 KB EEPROM, and an 8 KB boot-code section. Its integrated resources include USB Full-Speed device support, a two-channel DMA controller, a four-channel event system, a 4 x 40-segment LCD controller, and up to 53 I/O pins in a 100-pin TQFP package.
Where can I buy ATXMEGA128B1-AU online?
Use the Request a Quote form on this page to request ATXMEGA128B1-AU pricing, current availability, and order scheduling. The form allows the exact 100-pin TQFP ordering code and tray configuration to be identified before quotation. Current lead time and stock should be confirmed with XAIPART at the time of the request because component availability can change with manufacturing and market conditions.
What is the price and lead time for ATXMEGA128B1-AU?
Submit the ATXMEGA128B1-AU request through the Request a Quote form on this page to obtain the current unit terms, quantity breaks, stock position, and lead time. The form records the exact MPN ATXMEGA128B1-AU and the required 100-pin TQFP tray configuration. A quotation response is the appropriate mechanism for an order-on-request component with changing production and inventory conditions.

Справочные инженерные данные для ATXMEGA128B1-AU — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ATXMEGA128B1-AU when the design needs the documented combination of 32 MHz execution, 128 KB self-programmable Flash, 8 KB SRAM, USB Full-Speed device support, DMA, a four-channel event system, and a segmented LCD controller in a 100-pin TQFP. The ATXMEGA128B1-AN is the most direct same-package candidate when a different environmental ordering grade is appropriate, but temperature limits and qualification must be checked. Consider the ATXMEGA128D3-AU when its D3-specific clock and peripheral configuration fit the design more closely; verify maximum frequency and USB availability before replacing existing firmware. The ATXMEGA128A1-AU shares the package and 128 KB Flash class, but its different peripheral and clock characteristics require a more detailed review. No cross-brand drop-in alternative is presented because an XMEGA-compatible peripheral set, boot architecture, and software model make generic MCU substitution unusually risky.

Сравнение с аналогами

Параметр Этот товар ATXMEGA128B1-AN ATXMEGA128D3-AU ATXMEGA128A1-AU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 100-TQFP (14x14) 100-TQFP (14x14) - same 100-TQFP (14x14) - same 100-TQFP (14x14) - same
Product Family AVR XMEGA B1 AVR XMEGA B1 AVR XMEGA D3 AVR XMEGA A1
Program Memory 128 KB Flash 128 KB Flash 128 KB Flash 128 KB Flash

Ключевые отличия

  • Closest same-package temperature-grade alternative (против ATXMEGA128B1-AN)
  • Substantial integrated peripheral set (против ATXMEGA128A1-AU)
  • 32 MHz processing rate with 128 KB Flash (против ATXMEGA128D3-AU)

Заметки по проектированию

Place the required input and output decoupling capacitors directly beside their corresponding supply and ground pins, following the manufacturer layout and component-selection guidance. Keep the USB data-pair routing short, continuous, and over a continuous ground plane. The 100-pin TQFP lead pitch also requires careful footprint verification: confirm pin-1 orientation, exposed-pad requirements if applicable, solder-mask clearance, and paste volume before releasing the PCB artwork.

The device supports 1.8 V, 2.5 V, and 3.3 V operation, but the selected supply must satisfy the voltage, clock, and USB requirements for the complete design. Sequence rails consistently with the USB interface circuitry and avoid operating peripherals outside their permitted voltage ranges. If the board also includes sensors or transceivers, budget their current together with the MCU rather than sizing the regulator from the MCU name alone.

Use the event system and DMA channels to separate timed sampling from buffer movement, but ensure each peripheral’s event routing and channel assignment is checked against the device documentation. Review interrupt priority, DMA arbitration, and memory contention in firmware. For designs involving external precision references or analog front ends, maintain quiet return paths and avoid routing clock or high-current switching nodes beneath sensitive analog sections.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance status has not been established for the exact ordering code. Confirm current environmental, automotive, and material declarations with Microchip Technology before production release.

Похожие запросы

ATXMEGA128B1-AU datasheet ATXMEGA128B1-AU pinout ATXMEGA128B1-AU datasheet pdf ATXMEGA128B1-AU specifications ATXMEGA128B1-AU 100 TQFP ATXMEGA128B1-AU price ATXMEGA128B1-AU stock Microchip ATXMEGA128B1-AU ATXMEGA128B1-AU replacement ATXMEGA128B1-AU equivalent ATXMEGA128B1-AU vs ATXMEGA128B1-AN ATXMEGA128B1-AU USB application circuit

Связанные компоненты & термины

Microchip Technology ATXMEGA128B1-AU ATXMEGA128B1-AN ATXMEGA128D3-AU ATXMEGA128A1-AU ATxmega128B1 AVR AVR XMEGA 8/16-bit microcontroller embedded microcontroller semiconductor 128 KB Flash 8 KB SRAM 2 KB EEPROM 32 MHz 32 MIPS USB Full-Speed device controller DMA controller event system LCD controller 100-pin TQFP TQFP package family surface mount SMD self-programmable Flash
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ