C8051F326-GM - 25MHz USB 2.0 8-Bit MCU | Silicon Labs
MPN: C8051F326-GM ✓ AktifC8051F326-GM Ringkasan
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The C8051 belongs to the 8-bit embedded-controller hierarchy, where a compact instruction set and integrated peripherals support control, communications, data acquisition, and human-interface applications. Its USB controller combines an on-board transceiver with on-chip clock recovery, reducing the need for external USB interface components.
The C8051F326-GM operates from 2.7 V to 3.6 V and includes 16 KB of flash memory, 1.25 KB of RAM, an ADC, an internal voltage reference, and a ±1.5% internal oscillator. Port I/O and reset pins tolerate input signals up to 5 V, which supports mixed-voltage system interfaces. The -GM suffix identifies the RoHS-compliant device variant in the 28-pin QFN package.
Its full-speed USB 2.0 controller is the principal functional differentiator. Integrated clock recovery helps the device establish and maintain USB traffic without a separate external clock-recovery circuit, while the transceiver reduces board area for USB-connected embedded products. The 8051-compatible core runs at 25 MHz and targets applications that benefit from flash programmability, compact packaging, and direct USB connectivity.
Typical uses include USB-connected data-acquisition modules, configuration tools, programming accessories, human-interface devices, industrial control panels, and compact consumer peripherals. The ADC and internal reference support measurements without a separate analog front end, while general-purpose I/O can drive indicators, sensors, and digital interfaces.
PCB design should preserve short USB differential traces, controlled return paths, and adequate copper around the exposed thermal pad. Decoupling and grounding should follow the manufacturer datasheet layout guidance, while firmware must account for USB enumeration, clocking, and the device's 1.25 KB RAM limit.
This page combines the manufacturer's device specifications, verified distribution listings, practical USB layout guidance, and a strict comparison of confirmed same-package alternatives to support component selection and board-level implementation.
Pilihan pengganti yang segera untuk C8051F326-GM — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera C8051F326-GM (sama faktor bentuk dan kaki) — berbeza dalam Package, RoHS Status, USB Interface.
C8051F327-GM
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →C8051T326-GM
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
C8051F325-GM
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
C8051F326-GM Penilaian maksimum & Ciri-ciri Elektrik
| Microcontroller Core | 8-bit 8051 C8051 core |
| Frekuensi Klock Maksimum | 25 MHz |
| Flash Program Memory | 16 KB |
| RAM | 1.25 KB |
| Tegangan Pemberi Arus Operasi | 2.7 V to 3.6 V |
| USB Interface | USB 2.0 full-speed |
| USB Transceiver | Integrated |
| Clock Recovery | Integrated on-chip |
| Analog-to-Digital Converter | Integrated ADC |
| Internal Voltage Reference | Integrated |
| Internal Oscillator Accuracy | ±1.5% |
| Port I/O and Reset Input Tolerance | Up to 5 V |
| Kemasan | 28-pin QFN, 5 mm × 5 mm |
| Jenis Pemasangan | Surface mount |
| Status RoHS | Compliant for -GM suffix |
| Comparators | 0 comparators |
| Temperature Sensor | Integrated |
| Supply Voltage Tolerance of Port I/O and RST | 5 V |
Panduan Konfigurasi Pin C8051F326-GM 28-pin qfn, 5 mm × 5 mm
Konfigurasi pin untuk C8051F326-GM (28-pin qfn, 5 mm × 5 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk C8051F326-GM.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
C8051F326-GM patut untuk 6 aplikasis: USB Data Acquisition Module, USB Programming and Configuration Tool, Industrial Control Panel, Human Interface Device, USB Communication Adapter, Portable Measurement Product.
USB Data Acquisition Module
The C8051F326-GM fits compact USB measurement modules because it combines a 25 MHz 8051 core, 16 KB of flash, 1.25 KB of RAM, and an ADC in a 28-pin 5 mm × 5 mm QFN. Its USB 2.0 full-speed controller, integrated transceiver, and on-chip clock recovery reduce external interface circuitry. The design can sample sensor inputs, perform local processing, and return results over USB. Designers should size buffering around the 1.25 KB RAM limit and confirm acquisition throughput against the configured clock and peripheral operating states.
Disebarkan
USB Programming and Configuration Tool
The C8051F326-GM is appropriate for a USB-connected programming or configuration accessory where compact firmware, direct full-speed USB communication, and programmable nonvolatile memory are important. Its 16 KB flash supports device firmware and configuration data, while integrated USB clock recovery supports bus communication without a separate clock-recovery component. The 28-pin QFN footprint preserves board area in desktop accessories. Firmware planning must include USB enumeration, command processing, and wear-conscious updates to flash memory.
Disebarkan
Industrial Control Panel
The C8051F326-GM can act as the local controller in an industrial control panel that combines USB connectivity with digital and analog monitoring. Its 25 MHz processing rate supports responsive control tasks, the ADC supports analog input conditioning, and the internal voltage reference provides a reference for measurement channels. Flash permits field updates when permitted by the product design. The 2.7 V to 3.6 V supply requirement and 5 V-tolerant I/O and reset inputs simplify interface planning, although surge and grounding requirements must be handled at the board level.
Disebarkan
Human Interface Device
The C8051F326-GM supports USB human-interface products such as compact keypads, control surfaces, and configuration interfaces. It combines USB full-speed control with general-purpose I/O, flash memory, and an internal oscillator within a compact 28-pin QFN package. The integrated USB transceiver and clock recovery can reduce connector-area overhead, while the 8051 core handles key scanning, status feedback, and USB reports. Product validation should test enumeration across host operating systems and verify HID report timing within the available RAM budget.
Disebarkan
USB Communication Adapter
The C8051F326-GM is suitable for a small protocol-conversion or communications adapter that connects legacy serial equipment to a USB host. Its full-speed USB controller, integrated transceiver, and clock recovery handle the USB physical interface, while the 8051 core implements packet handling and device-specific protocols. The same device can support RS-232 bridging when paired with an appropriate line interface. Keep USB routing isolated from noisy analog and power sections, and validate protocol latency under the 1.25 KB RAM constraint.
Disebarkan
Portable Measurement Product
The C8051F326-GM fits portable measurement products that need USB connectivity, local digital control, and limited analog acquisition in a small board area. Its 25 MHz 8051 core, 1.25 KB RAM, 16 KB flash, ADC, and internal reference provide a compact embedded platform, while the 2.7 V to 3.6 V operating range supports low-voltage designs. The 28-pin QFN package reduces footprint, and port I/O and reset inputs tolerate 5 V signals. Battery-powered designs should evaluate active and USB-suspended current using the manufacturer's electrical-characteristics tables.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk C8051F326-GM — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | C8051F327-GM | C8051T326-GM | C8051F325-GM |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 28-pin QFN (5x5 mm) | 28-pin QFN (5x5 mm) | 28-pin QFN (5x5 mm) | 28-pin QFN (5x5 mm) |
| Processor Core | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 |
| Program Memory Type | Flash | Flash | OTP | Flash |
Penyeberangsung Jelas
- Field-programmable Flash memory (vsC8051T326-GM)
- Direct 25 MHz full-speed USB integration (vsC8051F325-GM)
- Lower documented core clock than the OTP sibling (vsC8051T326-GM)
- Compact integrated analog and timing resources (vsC8051F327-GM)
Catatan Desain
Route the USB D+ and D− conductors as a short, continuous, impedance-controlled differential pair. Keep the pair away from switching nodes, crystals, and high-current return paths, and provide a continuous ground reference beneath the pair. Apply the component placement and decoupling arrangement shown in the Silicon Labs C8051F326 datasheet because the integrated transceiver and on-chip clock recovery depend on clean high-speed signal integrity.
Place input and output decoupling capacitors close to their associated supply pins, and connect the exposed pad using a short thermal-via pattern consistent with the manufacturer's land pattern. The 28-pin QFN package is only 5 mm × 5 mm, so avoid placing tall parts that can interfere with assembly or rework. Verify pad dimensions against the C8051F326 package drawing rather than using a generic 28-pin QFN footprint.
Do not assume that every related 28-pin C8051 part has the same pinout. Silicon Labs states that the C8051F326 and C8051F327 are available in 28-pin QFN packages with different pinouts. Before substituting C8051F327-GM or another family member, compare every pad, USB connection, supply pin, oscillator connection, and exposed-pad requirement in the manufacturer pin-description tables.
Keep the core supply within 2.7 V to 3.6 V and use the manufacturer's recommended capacitor values and ESR characteristics. The 5 V tolerance applies to port I/O and reset inputs, not to the supply pins. Analyze the worst-case supply-current condition in the datasheet, especially during USB transmission and analog conversion, and ensure the regulator and PCB copper can supply it without causing voltage droop or USB signaling errors.
Maklumat Kesediaan
The Silicon Labs datasheet states that RoHS-compliant devices are marked with the -GM suffix. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was established.