Silicon Labs

C8051F326-GM - 25MHz USB 2.0 8-Bit MCU | Silicon Labs

부품 번호: C8051F326-GM ✓ 활성
2.7 V to 3.6 V Vdss 28-pin QFN, 5 mm × 5 mm Package 25 MHz Speed 16 KB Memory
MOQ: 1 |

C8051F326-GM 개요

Silicon Labs C8051F326-GM is an 8-bit C8051 microcontroller with a 25 MHz operating frequency, 16 KB of flash program memory, 1.25 KB of RAM, and an integrated USB 2.0 full-speed function controller in a 28-pin QFN package measuring 5 mm by 5 mm.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The C8051 belongs to the 8-bit embedded-controller hierarchy, where a compact instruction set and integrated peripherals support control, communications, data acquisition, and human-interface applications. Its USB controller combines an on-board transceiver with on-chip clock recovery, reducing the need for external USB interface components.

The C8051F326-GM operates from 2.7 V to 3.6 V and includes 16 KB of flash memory, 1.25 KB of RAM, an ADC, an internal voltage reference, and a ±1.5% internal oscillator. Port I/O and reset pins tolerate input signals up to 5 V, which supports mixed-voltage system interfaces. The -GM suffix identifies the RoHS-compliant device variant in the 28-pin QFN package.

Its full-speed USB 2.0 controller is the principal functional differentiator. Integrated clock recovery helps the device establish and maintain USB traffic without a separate external clock-recovery circuit, while the transceiver reduces board area for USB-connected embedded products. The 8051-compatible core runs at 25 MHz and targets applications that benefit from flash programmability, compact packaging, and direct USB connectivity.

Typical uses include USB-connected data-acquisition modules, configuration tools, programming accessories, human-interface devices, industrial control panels, and compact consumer peripherals. The ADC and internal reference support measurements without a separate analog front end, while general-purpose I/O can drive indicators, sensors, and digital interfaces.

PCB design should preserve short USB differential traces, controlled return paths, and adequate copper around the exposed thermal pad. Decoupling and grounding should follow the manufacturer datasheet layout guidance, while firmware must account for USB enumeration, clocking, and the device's 1.25 KB RAM limit.

This page combines the manufacturer's device specifications, verified distribution listings, practical USB layout guidance, and a strict comparison of confirmed same-package alternatives to support component selection and board-level implementation.

드롭인 대체품: C8051F326-GM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: C8051F326-GM (동일 폼 팩터 및 풋프린트) — 차이점: Package, RoHS Status, USB Interface.

Silicon Labs
Package: 28-QFN, 5 x 5 mm
RoHS Status: Compliant
USB Interface: USB 2.0
비교 대상: C8051F326-GM →

C8051F327-GM

✅ 드롭인
Silicon Labs
📦 28-pin QFN (5x5 mm)
8-bit 8051 CISC MCU · C8051F32x · 25 MHz · 16 KB · 16K x 8 bits · 2.7 V to 3.6 V · USB 2.0 · Integrated

가격 문의

데이터시트 보기 →

C8051T326-GM

✅ 드롭인
📦 28-pin QFN (5x5 mm)
Uses 16 KB OTP instead of 16 KB flash and is listed at 48 MIPS rather than 25 MHz; exact pin and firmware compatibility require validation

📋 참조 대체품 (카탈로그에 없음)

C8051F325-GM

✅ 드롭인 ⚠️ 사양 미검증
📦 28-pin QFN (5x5 mm)
Same-brand C8051F32x-family Flash MCU with related 25 MHz operation; memory capacity and peripheral configuration differ from C8051F326

📋 참조 대체품 (카탈로그에 없음)

C8051F326-GM 최대 정격 & 전기적 특성

Microcontroller Core 8-bit 8051 C8051 core
최대 클록 주파수 25 MHz
Flash Program Memory 16 KB
RAM 1.25 KB
동작 공급 전압 2.7 V to 3.6 V
USB Interface USB 2.0 full-speed
USB Transceiver Integrated
Clock Recovery Integrated on-chip
Analog-to-Digital Converter Integrated ADC
Internal Voltage Reference Integrated
Internal Oscillator Accuracy ±1.5%
Port I/O and Reset Input Tolerance Up to 5 V
패키지 28-pin QFN, 5 mm × 5 mm
실장 유형 Surface mount
RoHS 상태 Compliant for -GM suffix
Comparators 0 comparators
Temperature Sensor Integrated
Supply Voltage Tolerance of Port I/O and RST 5 V

C8051F326-GM 28-pin qfn, 5 mm × 5 mm 핀 구성 가이드

C8051F326-GM(28-pin qfn, 5 mm × 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

C8051F326-GM의 28-pin qfn, 5 mm × 5 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: C8051F326-GM.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

C8051F326-GM 적합 용도: 6 애플리케이션s: USB Data Acquisition Module, USB Programming and Configuration Tool, Industrial Control Panel, Human Interface Device, USB Communication Adapter, Portable Measurement Product.

🖥️

USB Data Acquisition Module

The C8051F326-GM fits compact USB measurement modules because it combines a 25 MHz 8051 core, 16 KB of flash, 1.25 KB of RAM, and an ADC in a 28-pin 5 mm × 5 mm QFN. Its USB 2.0 full-speed controller, integrated transceiver, and on-chip clock recovery reduce external interface circuitry. The design can sample sensor inputs, perform local processing, and return results over USB. Designers should size buffering around the 1.25 KB RAM limit and confirm acquisition throughput against the configured clock and peripheral operating states.

🔧

USB Programming and Configuration Tool

The C8051F326-GM is appropriate for a USB-connected programming or configuration accessory where compact firmware, direct full-speed USB communication, and programmable nonvolatile memory are important. Its 16 KB flash supports device firmware and configuration data, while integrated USB clock recovery supports bus communication without a separate clock-recovery component. The 28-pin QFN footprint preserves board area in desktop accessories. Firmware planning must include USB enumeration, command processing, and wear-conscious updates to flash memory.

🏭

Industrial Control Panel

The C8051F326-GM can act as the local controller in an industrial control panel that combines USB connectivity with digital and analog monitoring. Its 25 MHz processing rate supports responsive control tasks, the ADC supports analog input conditioning, and the internal voltage reference provides a reference for measurement channels. Flash permits field updates when permitted by the product design. The 2.7 V to 3.6 V supply requirement and 5 V-tolerant I/O and reset inputs simplify interface planning, although surge and grounding requirements must be handled at the board level.

🎧

Human Interface Device

The C8051F326-GM supports USB human-interface products such as compact keypads, control surfaces, and configuration interfaces. It combines USB full-speed control with general-purpose I/O, flash memory, and an internal oscillator within a compact 28-pin QFN package. The integrated USB transceiver and clock recovery can reduce connector-area overhead, while the 8051 core handles key scanning, status feedback, and USB reports. Product validation should test enumeration across host operating systems and verify HID report timing within the available RAM budget.

🌐

USB Communication Adapter

The C8051F326-GM is suitable for a small protocol-conversion or communications adapter that connects legacy serial equipment to a USB host. Its full-speed USB controller, integrated transceiver, and clock recovery handle the USB physical interface, while the 8051 core implements packet handling and device-specific protocols. The same device can support RS-232 bridging when paired with an appropriate line interface. Keep USB routing isolated from noisy analog and power sections, and validate protocol latency under the 1.25 KB RAM constraint.

📱

Portable Measurement Product

The C8051F326-GM fits portable measurement products that need USB connectivity, local digital control, and limited analog acquisition in a small board area. Its 25 MHz 8051 core, 1.25 KB RAM, 16 KB flash, ADC, and internal reference provide a compact embedded platform, while the 2.7 V to 3.6 V operating range supports low-voltage designs. The 28-pin QFN package reduces footprint, and port I/O and reset inputs tolerate 5 V signals. Battery-powered designs should evaluate active and USB-suspended current using the manufacturer's electrical-characteristics tables.

What is the operating voltage of C8051F326-GM?
The C8051F326-GM operates from 2.7 V to 3.6 V. According to the Silicon Labs C8051F326 and C8051F327 datasheet, the device includes an internal voltage reference, a ±1.5% internal oscillator, and an integrated ADC. Port I/O and reset inputs accept signals up to 5 V, although the core supply must remain within the specified 2.7 V to 3.6 V range.
What are the key specifications of C8051F326-GM that engineers should know?
The C8051F326-GM combines a 25 MHz 8-bit 8051 core, 16 KB of flash memory, 1.25 KB of RAM, and an integrated USB 2.0 full-speed controller. Silicon Labs specifies a 28-pin 5 mm × 5 mm QFN package, an ADC, an internal voltage reference, and a ±1.5% internal oscillator. The integrated USB transceiver and clock recovery reduce the external circuitry needed for a compact USB peripheral.
Does C8051F326-GM have full-speed USB?
Yes, the C8051F326-GM includes a USB 2.0 full-speed function controller with an integrated transceiver and on-chip clock recovery. The Silicon Labs device page identifies these USB functions as standard features of the C8051F326. This integration supports direct USB connectivity for data acquisition, configuration tools, programming devices, and other compact peripherals.
Where can I download the C8051F326-GM datasheet PDF?
The official C8051F326 datasheet PDF is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/C8051F326.pdf. The document covers the C8051F326 and C8051F327 full-speed USB MCU family, including electrical characteristics, package options, pin descriptions, and application information. Use the pin-description table in this manufacturer document when assigning PCB tracks.
Where can I find the C8051F326-GM pinout?
The C8051F326-GM pinout is published in the Silicon Labs C8051F326 and C8051F327 datasheet. The target uses a 28-pin QFN package measuring 5 mm × 5 mm, and the manufacturer states that C8051F326 and C8051F327 are offered in two 28-pin QFN packages with different pinouts. Match the exact C8051F326 package drawing rather than assuming that the C8051F327 pinout is identical.
What can replace C8051F326-GM?
The C8051F327-GM is the closest same-package alternative identified for the C8051F326-GM, while the C8051T326-GM offers an OTP-memory alternative in the same 28-pin QFN family. Drop-in suitability still requires checking the exact package pinout, memory needs, firmware behavior, clocking, and USB implementation. Cross-brand replacements were not established as pin-to-pin compatible.
Is C8051F326-GM the same as C8051F327-GM?
No, the C8051F326-GM and C8051F327-GM are related devices rather than identical products. Both belong to Silicon Labs' 8051 full-speed USB family and are associated with 28-pin QFN options, but the manufacturer explicitly notes that the two devices use 28-pin QFN packages with different pinouts. Confirm the exact pin drawing and firmware requirements before considering a substitution.
C8051F326-GM vs C8051F327-GM — which is better for a USB peripheral?
Choose the C8051F326-GM when its 16 KB flash and 1.25 KB RAM match the firmware requirement and its exact pinout is required. Choose the C8051F327-GM when its additional resources are needed and its distinct 28-pin QFN pinout can be accommodated. The C8051F326-GM retains the same 25 MHz 8-bit architecture and full-speed USB integration at 2.7 V to 3.6 V.
When should I choose C8051F326-GM over C8051F327-GM?
Choose the C8051F326-GM when 16 KB of flash and 1.25 KB of RAM are sufficient and you need the exact C8051F326 pin configuration. Select the C8051F327-GM when greater memory resources justify a board-level pinout and firmware review. Because Silicon Labs states that the two 28-pin QFN options have different pinouts, this choice is not automatically a no-change PCB substitution.
When should I choose C8051F326-GM over C8051T326-GM?
Choose the C8051F326-GM when field-programmable flash is required for firmware updates, configuration storage, or prototype development. Consider the C8051T326-GM when one-time programmable memory is acceptable and the application benefits from its listed 48 MIPS performance. Both are associated with the 8051 C8051T32x/C8051F32x family and a 28-pin QFN format, but memory technology and firmware migration require review.
Is C8051F326-GM suitable for USB data acquisition?
Yes, the C8051F326-GM is suitable for compact USB data-acquisition equipment when the application fits within 16 KB of flash and 1.25 KB of RAM. Its integrated USB 2.0 full-speed controller, transceiver, and clock recovery simplify the physical interface, while the ADC and internal voltage reference support measurement functions. Sampling throughput and buffering must be checked against the available RAM and firmware workload.
Where can I buy C8051F326-GM online?
Use the Request a Quote form on this page to request C8051F326-GM availability, current pricing, and lead time. The manufacturer product page and authorized distribution records identify the C8051F326-GM as a cataloged 25 MHz, 16 KB-flash microcontroller. A quote request allows the current order quantity, delivery requirements, and package handling needs to be confirmed together.
What is the price of C8051F326-GM?
Current C8051F326-GM pricing is handled through the Request a Quote form on this page. Market pricing can vary with order quantity, procurement status, and supply conditions, so use the form to obtain a current offer for the exact 28-pin QFN device. The manufacturer part number includes the -GM package and RoHS-compliant suffix rather than a generic C8051F326 designation.
What is the lead time for C8051F326-GM?
Submit a Request a Quote for the current C8051F326-GM lead time and available order quantity. The form should state the required delivery date, annual usage, and whether reel or another permitted packing format is needed. Silicon Labs continues to identify the C8051F326 on its official product page, while current procurement timing should be confirmed for the exact -GM orderable MPN.
Is C8051F326-GM in stock?
Current C8051F326-GM inventory should be confirmed through the Request a Quote form on this page. Stock status can vary by package code, order quantity, and procurement schedule, and a general catalog listing does not establish a guaranteed allocation. Include your requested quantity and target delivery date so the quotation can reflect the exact C8051F326-GM configuration you need.
How much power does C8051F326-GM use?
The C8051F326-GM operates from 2.7 V to 3.6 V, with its detailed supply-current behavior defined in the Silicon Labs C8051F326 datasheet. USB operating state, clock frequency, GPIO loading, and analog activity determine the actual system consumption. Use the manufacturer's electrical-characteristics tables and your firmware activity profile rather than treating an inactive GPIO or USB-suspended state as the worst-case condition.

엔지니어링 참조 데이터: C8051F326-GM — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the C8051F326-GM for a compact USB-enabled embedded design that needs 25 MHz 8051 processing, 16 KB of reprogrammable Flash, 1.25 KB of RAM, and integrated USB full-speed communication. Its ADC, internal reference, internal oscillator, and 28-pin QFN package make it suitable for compact data-acquisition, programming, configuration, and human-interface products. Consider the C8051F327-GM when its larger memory resources are needed, but verify its distinct QFN pinout and review the board changes and firmware implications. Consider the C8051T326-GM only when OTP is acceptable and its listed performance provides a meaningful advantage, since field updates are not available with OTP memory. The C8051F325-GM should be considered when its specific resource and peripheral configuration fits the design, provided the manufacturer pin table confirms compatibility. No verified cross-brand drop-in equivalent was established, so an MCU migration outside the Silicon Labs family should be treated as a redesign unless formal pin and software equivalence is proven.

대체품과의 비교

파라미터 이 제품 C8051F327-GM C8051T326-GM C8051F325-GM
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 28-pin QFN (5x5 mm) 28-pin QFN (5x5 mm) 28-pin QFN (5x5 mm) 28-pin QFN (5x5 mm)
Processor Core 8-bit 8051 8-bit 8051 8-bit 8051 8-bit 8051
Program Memory Type Flash Flash OTP Flash

주요 차별점

  • Field-programmable Flash memory (vs C8051T326-GM)
  • Direct 25 MHz full-speed USB integration (vs C8051F325-GM)
  • Lower documented core clock than the OTP sibling (vs C8051T326-GM)
  • Compact integrated analog and timing resources (vs C8051F327-GM)

설계 노트

Route the USB D+ and D− conductors as a short, continuous, impedance-controlled differential pair. Keep the pair away from switching nodes, crystals, and high-current return paths, and provide a continuous ground reference beneath the pair. Apply the component placement and decoupling arrangement shown in the Silicon Labs C8051F326 datasheet because the integrated transceiver and on-chip clock recovery depend on clean high-speed signal integrity.

Place input and output decoupling capacitors close to their associated supply pins, and connect the exposed pad using a short thermal-via pattern consistent with the manufacturer's land pattern. The 28-pin QFN package is only 5 mm × 5 mm, so avoid placing tall parts that can interfere with assembly or rework. Verify pad dimensions against the C8051F326 package drawing rather than using a generic 28-pin QFN footprint.

Do not assume that every related 28-pin C8051 part has the same pinout. Silicon Labs states that the C8051F326 and C8051F327 are available in 28-pin QFN packages with different pinouts. Before substituting C8051F327-GM or another family member, compare every pad, USB connection, supply pin, oscillator connection, and exposed-pad requirement in the manufacturer pin-description tables.

Keep the core supply within 2.7 V to 3.6 V and use the manufacturer's recommended capacitor values and ESR characteristics. The 5 V tolerance applies to port I/O and reset inputs, not to the supply pins. Analyze the worst-case supply-current condition in the datasheet, especially during USB transmission and analog conversion, and ensure the regulator and PCB copper can supply it without causing voltage droop or USB signaling errors.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The Silicon Labs datasheet states that RoHS-compliant devices are marked with the -GM suffix. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was established.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

C8051F326-GM datasheet C8051F326-GM pinout C8051F326-GM datasheet pdf C8051F326-GM equivalent C8051F326-GM replacement C8051F326-GM vs C8051F327-GM C8051F326-GM footprint C8051F326-GM price C8051F326-GM stock Silicon Labs C8051F326-GM C8051F326 25MHz 16KB flash MCU C8051F326 USB 2.0 controller C8051F326 QFN28 application circuit

관련 부품 & 용어

Silicon Labs C8051F326-GM C8051F326 C8051F327-GM C8051T326-GM C8051F325-GM C8051 core 8-bit microcontroller embedded microcontroller USB 2.0 full-speed controller USB transceiver on-chip clock recovery analog-to-digital converter internal voltage reference internal oscillator temperature sensor 16 KB Flash memory 1.25 KB RAM 25 MHz clock 2.7 V to 3.6 V supply 28-pin QFN QFN family surface-mount package RoHS USB data acquisition industrial control panel USB human-interface device
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기