C8051F326-GM - 25MHz USB 2.0 8-Bit MCU | Silicon Labs
MPN: C8051F326-GM ✓ 啟用中C8051F326-GM 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The C8051 belongs to the 8-bit embedded-controller hierarchy, where a compact instruction set and integrated peripherals support control, communications, data acquisition, and human-interface applications. Its USB controller combines an on-board transceiver with on-chip clock recovery, reducing the need for external USB interface components.
The C8051F326-GM operates from 2.7 V to 3.6 V and includes 16 KB of flash memory, 1.25 KB of RAM, an ADC, an internal voltage reference, and a ±1.5% internal oscillator. Port I/O and reset pins tolerate input signals up to 5 V, which supports mixed-voltage system interfaces. The -GM suffix identifies the RoHS-compliant device variant in the 28-pin QFN package.
Its full-speed USB 2.0 controller is the principal functional differentiator. Integrated clock recovery helps the device establish and maintain USB traffic without a separate external clock-recovery circuit, while the transceiver reduces board area for USB-connected embedded products. The 8051-compatible core runs at 25 MHz and targets applications that benefit from flash programmability, compact packaging, and direct USB connectivity.
Typical uses include USB-connected data-acquisition modules, configuration tools, programming accessories, human-interface devices, industrial control panels, and compact consumer peripherals. The ADC and internal reference support measurements without a separate analog front end, while general-purpose I/O can drive indicators, sensors, and digital interfaces.
PCB design should preserve short USB differential traces, controlled return paths, and adequate copper around the exposed thermal pad. Decoupling and grounding should follow the manufacturer datasheet layout guidance, while firmware must account for USB enumeration, clocking, and the device's 1.25 KB RAM limit.
This page combines the manufacturer's device specifications, verified distribution listings, practical USB layout guidance, and a strict comparison of confirmed same-package alternatives to support component selection and board-level implementation.
直接替換替代品,適用於 C8051F326-GM — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: C8051F326-GM (相同外形與佔位) — 差異在於 Package, RoHS Status, USB Interface.
C8051F327-GM
✅ 直接替換聯絡詢價
查看資料表 →C8051T326-GM
✅ 直接替換📋 參考替代品(不在目錄中)
C8051F325-GM
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
C8051F326-GM 最大額定值與電氣特性
| Microcontroller Core | 8-bit 8051 C8051 core |
| 最大時脈頻率 | 25 MHz |
| Flash Program Memory | 16 KB |
| RAM | 1.25 KB |
| 工作電源電壓 | 2.7 V to 3.6 V |
| USB Interface | USB 2.0 full-speed |
| USB Transceiver | Integrated |
| Clock Recovery | Integrated on-chip |
| Analog-to-Digital Converter | Integrated ADC |
| Internal Voltage Reference | Integrated |
| Internal Oscillator Accuracy | ±1.5% |
| Port I/O and Reset Input Tolerance | Up to 5 V |
| 封裝 | 28-pin QFN, 5 mm × 5 mm |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant for -GM suffix |
| Comparators | 0 comparators |
| Temperature Sensor | Integrated |
| Supply Voltage Tolerance of Port I/O and RST | 5 V |
C8051F326-GM 28-pin qfn, 5 mm × 5 mm 腳位配置指南
C8051F326-GM(28-pin qfn, 5 mm × 5 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: C8051F326-GM.
請參閱 資料表 以查看完整腳位配置。
典型應用
C8051F326-GM 適用於 6 應用s: USB Data Acquisition Module, USB Programming and Configuration Tool, Industrial Control Panel, Human Interface Device, USB Communication Adapter, Portable Measurement Product.
USB Data Acquisition Module
The C8051F326-GM fits compact USB measurement modules because it combines a 25 MHz 8051 core, 16 KB of flash, 1.25 KB of RAM, and an ADC in a 28-pin 5 mm × 5 mm QFN. Its USB 2.0 full-speed controller, integrated transceiver, and on-chip clock recovery reduce external interface circuitry. The design can sample sensor inputs, perform local processing, and return results over USB. Designers should size buffering around the 1.25 KB RAM limit and confirm acquisition throughput against the configured clock and peripheral operating states.
推薦
USB Programming and Configuration Tool
The C8051F326-GM is appropriate for a USB-connected programming or configuration accessory where compact firmware, direct full-speed USB communication, and programmable nonvolatile memory are important. Its 16 KB flash supports device firmware and configuration data, while integrated USB clock recovery supports bus communication without a separate clock-recovery component. The 28-pin QFN footprint preserves board area in desktop accessories. Firmware planning must include USB enumeration, command processing, and wear-conscious updates to flash memory.
推薦
Industrial Control Panel
The C8051F326-GM can act as the local controller in an industrial control panel that combines USB connectivity with digital and analog monitoring. Its 25 MHz processing rate supports responsive control tasks, the ADC supports analog input conditioning, and the internal voltage reference provides a reference for measurement channels. Flash permits field updates when permitted by the product design. The 2.7 V to 3.6 V supply requirement and 5 V-tolerant I/O and reset inputs simplify interface planning, although surge and grounding requirements must be handled at the board level.
推薦
Human Interface Device
The C8051F326-GM supports USB human-interface products such as compact keypads, control surfaces, and configuration interfaces. It combines USB full-speed control with general-purpose I/O, flash memory, and an internal oscillator within a compact 28-pin QFN package. The integrated USB transceiver and clock recovery can reduce connector-area overhead, while the 8051 core handles key scanning, status feedback, and USB reports. Product validation should test enumeration across host operating systems and verify HID report timing within the available RAM budget.
推薦
USB Communication Adapter
The C8051F326-GM is suitable for a small protocol-conversion or communications adapter that connects legacy serial equipment to a USB host. Its full-speed USB controller, integrated transceiver, and clock recovery handle the USB physical interface, while the 8051 core implements packet handling and device-specific protocols. The same device can support RS-232 bridging when paired with an appropriate line interface. Keep USB routing isolated from noisy analog and power sections, and validate protocol latency under the 1.25 KB RAM constraint.
推薦
Portable Measurement Product
The C8051F326-GM fits portable measurement products that need USB connectivity, local digital control, and limited analog acquisition in a small board area. Its 25 MHz 8051 core, 1.25 KB RAM, 16 KB flash, ADC, and internal reference provide a compact embedded platform, while the 2.7 V to 3.6 V operating range supports low-voltage designs. The 28-pin QFN package reduces footprint, and port I/O and reset inputs tolerate 5 V signals. Battery-powered designs should evaluate active and USB-suspended current using the manufacturer's electrical-characteristics tables.
推薦
推薦產品摘要
工程參考資料,適用於 C8051F326-GM — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | C8051F327-GM | C8051T326-GM | C8051F325-GM |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 28-pin QFN (5x5 mm) | 28-pin QFN (5x5 mm) | 28-pin QFN (5x5 mm) | 28-pin QFN (5x5 mm) |
| Processor Core | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 |
| Program Memory Type | Flash | Flash | OTP | Flash |
主要差異化特點
- Field-programmable Flash memory (對比C8051T326-GM)
- Direct 25 MHz full-speed USB integration (對比C8051F325-GM)
- Lower documented core clock than the OTP sibling (對比C8051T326-GM)
- Compact integrated analog and timing resources (對比C8051F327-GM)
設計說明
Route the USB D+ and D− conductors as a short, continuous, impedance-controlled differential pair. Keep the pair away from switching nodes, crystals, and high-current return paths, and provide a continuous ground reference beneath the pair. Apply the component placement and decoupling arrangement shown in the Silicon Labs C8051F326 datasheet because the integrated transceiver and on-chip clock recovery depend on clean high-speed signal integrity.
Place input and output decoupling capacitors close to their associated supply pins, and connect the exposed pad using a short thermal-via pattern consistent with the manufacturer's land pattern. The 28-pin QFN package is only 5 mm × 5 mm, so avoid placing tall parts that can interfere with assembly or rework. Verify pad dimensions against the C8051F326 package drawing rather than using a generic 28-pin QFN footprint.
Do not assume that every related 28-pin C8051 part has the same pinout. Silicon Labs states that the C8051F326 and C8051F327 are available in 28-pin QFN packages with different pinouts. Before substituting C8051F327-GM or another family member, compare every pad, USB connection, supply pin, oscillator connection, and exposed-pad requirement in the manufacturer pin-description tables.
Keep the core supply within 2.7 V to 3.6 V and use the manufacturer's recommended capacitor values and ESR characteristics. The 5 V tolerance applies to port I/O and reset inputs, not to the supply pins. Analyze the worst-case supply-current condition in the datasheet, especially during USB transmission and analog conversion, and ensure the regulator and PCB copper can supply it without causing voltage droop or USB signaling errors.
合規資訊
The Silicon Labs datasheet states that RoHS-compliant devices are marked with the -GM suffix. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was established.