onsemi

CD4053BCM - Triple 2:1 240Ω Analog Switch | onsemi

MPN: CD4053BCM ✓ Aktif
VDD, VSS, and VEE rails Vdss 240 Ω Rds(on) 16-SOIC Package
MOQ: 1 |

CD4053BCM Ringkasan

The onsemi CD4053BCM is a triple 2:1 analog multiplexer and demultiplexer with three independently controlled switching circuits, 240 Ω ON resistance, and a 16-lead SOIC package. The device routes analog signals according to three binary select inputs and an inhibit control, allowing one shared signal path to replace multiple discrete switches. Its CMOS construction supports low power consumption and low static leakage.

An analog multiplexer is a semiconductor switch that connects one of several analog inputs to a common output. The broader hierarchy is analog multiplexer or demultiplexer → analog switch → interface IC → semiconductor. A multiplexer combines signals onto one path, while a demultiplexer separates a shared path into multiple destinations. The CD4053BCM implements both functions through three 2:1 switch sections sharing the same address and inhibit controls.

The principal verified features are three switch circuits, a 2:1 configuration, 240 Ω ON resistance, a 16-SOIC package, and CMOS operation. Control inputs A, B, and C select the active route, while INHIBIT provides a common shutdown or isolation function. The manufacturer documentation also identifies low ON impedance and very low OFF leakage current. Typical electrical characteristics are tabulated from −55 °C through 125 °C, supporting industrial and extended-temperature designs.

The CD4053BCM is suited to signals that remain within the device’s supply and analog signal limits. Because the control inputs are digital while the switched paths are analog, the address logic may operate from the same supply rails when their voltage thresholds are compatible with the system. Input protection and signal-level behavior depend on the exact supply configuration, so the electrical characteristic tables should be checked for each channel state and operating condition.

Typical uses include sensor selection, instrumentation routing, signal multiplexing in test systems, audio channel selection, and general analog signal switching. Three independent 2:1 sections are particularly useful when several paired signals must be selected together. For example, a controller can route differential sensor outputs, alternate measurement paths, or share a converter input among several sources without changing the surrounding board layout.

PCB implementation should preserve short analog traces, use a continuous ground plane, and keep switching nodes compact to reduce coupling and parasitic capacitance. Avoid routing high-impedance or sensitive signals directly beside the address and inhibit traces. Decoupling capacitors should be placed close to the supply pins, while unused control inputs must be tied to a defined logic level rather than left floating.

This page organizes the verified electrical characteristics, pin information, drop-in alternatives, application guidance, and design considerations into one engineering reference. It also identifies which parameters require confirmation before substitution or redesign, helping engineers shorten component selection and PCB-review time.

Pilihan pengganti yang segera untuk CD4053BCM — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

CD74HC4053M

✅ Masuk Drop-In
📦 16-SOIC
16 pins versus 16 pins, a 0% pin-count difference; alternative ON resistance and supply limits

📋 Alternatif rujukan (tidak dalam katalog)

CD74HC4053PWR

✅ Masuk Drop-In
📦 16-SOIC
16 pins versus 16 pins, a 0% pin-count difference; alternative logic thresholds and electrical limits

📋 Alternatif rujukan (tidak dalam katalog)

CD74HC4053

✅ Masuk Drop-In
📦 16-SOIC
Same 16-pin multiplexed-switch pin count; exact suffix, ON resistance, and supply ratings

📋 Alternatif rujukan (tidak dalam katalog)

SN74LV4053A

✅ Masuk Drop-In
📦 16-SOIC
Same 16-terminal switching footprint; alternative low-voltage logic thresholds and analog ratings

📋 Alternatif rujukan (tidak dalam katalog)

CD4053BMG4

✅ Masuk Drop-In
📦 16-SOIC
Same 16-pin CD4053-family switching function; exact suffix-level electrical differences

📋 Alternatif rujukan (tidak dalam katalog)

CD4053BCM Penilaian maksimum & Ciri-ciri Elektrik

Switch Circuit Count 3 circuits
Multiplexer Configuration 2:1 per circuit
ON Resistance 240 Ω
Technology CMOS
Kemasan 16-SOIC
Kiraan Pin 16 pins
Jenis Pemasangan Surface mount
Select Inputs A, B, and C
Control Inputs A, B, C, and INHIBIT
Characteristic Temperature Points −55 °C, 25 °C, and 125 °C
Supply Configuration VDD, VSS, and VEE rails
Control Input Test Condition VDD = 5 V
Control Input Load Condition RL = 1 kΩ to VSS

Panduan Konfigurasi Pin CD4053BCM 16-soic

Konfigurasi pin untuk CD4053BCM (16-soic pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 16-soic untuk CD4053BCM

Tiada data garisan pin yang diperoleh untuk CD4053BCM.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

CD4053BCM patut untuk 6 aplikasis: Multiplexed Sensor Measurement, Instrumentation Signal Routing, Audio Channel Selection, Test-System Signal Multiplexing, Data Acquisition Front Ends, Battery-Powered Analog Systems.

🧩

Multiplexed Sensor Measurement

The CD4053BCM fits sensor-selection circuits that must route several measured signals to a shared amplifier or converter. Its three 2:1 sections can select three signal pairs, while the common address inputs keep the channels synchronized. The documented 240 Ω ON resistance gives designers a concrete impedance value to include in sensor settling and amplifier-input calculations. Because the device also provides very low OFF leakage, disabled channels can contribute less unwanted interaction with high-impedance sensors. Confirm the permitted signal range against the supply configuration and verify whether the source impedance requires a separate buffer.

🏭

Instrumentation Signal Routing

The CD4053BCM is appropriate for laboratory and industrial instrumentation that selects among several measurement paths without changing connectors or using multiple discrete relays. Three independently addressed 2:1 switch sections simplify routing of paired excitation and return signals. The 240 Ω ON resistance must be included in source-load calculations, particularly for high-impedance sensors and long cable runs. Its low OFF leakage characteristic helps reduce crosstalk between disabled paths. Layout should keep sensitive routes away from address and inhibit traces, while supply bypassing should be placed directly between the device power terminals.

🎧

Audio Channel Selection

The CD4053BCM can select audio or communications paths when the source impedance is low enough for the 240 Ω ON resistance to preserve signal amplitude. The three 2:1 sections support compact routing of related left/right or input/output pairs in analog equipment. Its very low OFF leakage helps maintain isolation between unselected sources, although common-mode range, distortion, and switching transients remain important considerations. Use short PCB traces, a continuous return plane, and decoupled supply pins to prevent digital control activity from coupling into the audio path. Verify the actual signal swing before operation.

🔧

Test-System Signal Multiplexing

The CD4053BCM is useful in automated test equipment that routes a shared source, instrument input, or stimulus across several circuit nodes. Its three 2:1 sections provide compact channel selection while the inhibit function supports isolation during test sequencing. Engineers can use the 240 Ω ON resistance when defining measurement accuracy and output-loading budgets. Care is required if the multiplexer switches near large transients, because supply bounce and control-edge coupling can disturb high-impedance measurements. Add local supply bypassing and avoid placing multiplexed analog traces beside digital address lines.

📺

Data Acquisition Front Ends

The CD4053BCM can front a data-acquisition system by selecting which analog source reaches a common converter input. Three 2:1 sections make it practical to multiplex grouped channels while retaining one compact package and one set of address controls. The 240 Ω ON resistance should be checked against the converter’s acquisition time and the source impedance, because excessive loading can reduce settling accuracy. The device’s very low OFF leakage is beneficial when unused sources have high DC impedance. A grounded plane, short switched traces, and closely placed supply decoupling provide a stable return path and reduce digital coupling.

📱

Battery-Powered Analog Systems

The CD4053BCM can reduce routing complexity in low-power analog systems by replacing several discrete switches with one CMOS multiplexer. Its three 2:1 sections support compact signal selection in portable instruments, condition-monitoring nodes, and compact sensor interfaces. Low OFF leakage is valuable when the selected source has a high impedance, while the 240 Ω ON resistance must remain compatible with the load. Supply current, switching speed, and permissible input swing should be reviewed for the actual operating mode. The INHIBIT control can also support isolation when the system needs a defined inactive state.

Ringkasan Produk Disebarkan

CD74HC4053M Alternative 16-SOIC analog multiplexer Dipergunakan di: Multiplexed Sensor Measurement, Instrumentation Signal Routing, Test-System Signal Multiplexing SN74LV4053A Low-voltage 16-pin multiplexing candidate Dipergunakan di: Multiplexed Sensor Measurement, Test-System Signal Multiplexing, Battery-Powered Analog Systems CD4053BMG4 CD4053-family 16-pin alternative Dipergunakan di: Instrumentation Signal Routing, Data Acquisition Front Ends CD74HC4053PWR Alternative 16-pin analog switch Dipergunakan di: Audio Channel Selection, Data Acquisition Front Ends CD74HC4053 Same-footprint multiplexing option Dipergunakan di: Audio Channel Selection, Battery-Powered Analog Systems
What is the onsemi CD4053BCM?
The onsemi CD4053BCM is a triple 2:1 analog multiplexer and demultiplexer in a 16-SOIC package. It contains three independently addressed CMOS switching sections with 240 Ω ON resistance. According to the manufacturer datasheet, A, B, and C are the select inputs and INHIBIT is the common inhibit control, allowing analog signals to be routed or isolated without using three separate discrete switch packages.
What are the key specifications of CD4053BCM that engineers should know?
The CD4053BCM provides three 2:1 switch circuits, 240 Ω ON resistance, CMOS operation, and a 16-SOIC surface-mount package. Its documented characteristics include low ON impedance, very low OFF leakage current, A/B/C address inputs, an INHIBIT input, and operation from −55 °C through 125 °C. According to the manufacturer datasheet, the control-input table uses VEE, VSS, VDD, RL = 1 kΩ, and a 5 V VDD test condition.
How does the CD4053BCM select an analog channel?
The CD4053BCM selects a channel by applying the appropriate logic states to its A, B, and C inputs. The three 2:1 sections share the address and inhibit controls, allowing related analog paths to be changed together. According to the manufacturer datasheet, INHIBIT is evaluated with the same control-input network; its detailed active logic state and channel-routing table should be used when assigning PCB functions.
Where can I download the CD4053BCM datasheet PDF?
The CD4053BCM datasheet PDF is available through the manufacturer-document link listed on this page and through the CD4053BCM document listings. It describes the triple 2:1 switch function, DC electrical characteristics, temperature points, and the 16-lead Small Outline Integrated Circuit package. Use the manufacturer document numbering and pin-description tables when assigning physical connections or qualifying a replacement.
Where can I find the CD4053BCM pinout?
The CD4053BCM pinout is defined in the manufacturer datasheet’s pin-description table for the 16-lead SOIC package. The device uses three select inputs, an inhibit input, supply terminals, and the common and switched terminals for its three analog channels. Use that table as the authoritative assignment for board design, and do not infer terminal numbering from another member of the CD4000 family.
Is CD4053BCM suitable for multiplexed sensor measurement?
The CD4053BCM is suitable for multiplexed sensor measurement when the sensor signals remain within the device’s specified analog and supply limits. Its three 2:1 sections can select paired or related sensor paths while presenting a 240 Ω ON resistance. According to the manufacturer datasheet, the device has low ON impedance and very low OFF leakage current, but the complete electrical limits must be checked for the selected supply voltage.
What is the difference between CD4053BCM and CD74HC4053M?
CD4053BCM and CD74HC4053M both provide a triple 2:1 analog-switch function in a 16-pin SOIC package, making the footprint and terminal count directly comparable. CD4053BCM is characterized at 240 Ω ON resistance, while the exact CD74HC4053M ON-resistance and supply-voltage limits should be confirmed from its manufacturer documentation. The devices use different logic families and supply ranges, so control-level compatibility must be checked before substitution.
What is the difference between CD4053BCM and CD74HC4053PWR?
CD4053BCM and CD74HC4053PWR both use a 16-pin SOIC package and implement three 2:1 analog switch sections, so their physical pin count matches. CD4053BCM has a documented 240 Ω ON resistance, whereas the corresponding CD74HC4053PWR value requires confirmation in the Texas Instruments datasheet. Their logic thresholds and supply ranges are different, making level translation and biasing the principal substitution checks.
When should I choose CD4053BCM over CD74HC4053M?
Choose CD4053BCM when the design specifically requires the CD4053BCM’s documented 240 Ω ON resistance, low OFF leakage behavior, and control characteristics established at the listed −55 °C, 25 °C, and 125 °C points. Choose CD74HC4053M when its separate supply and logic-level specifications provide a better fit. Both use a 16-pin SOIC footprint, so the final decision should include signal range, supply voltage, and logic compatibility.
Is CD4053BCM suitable for a 5 V analog switching system?
The CD4053BCM can be evaluated for a 5 V switching system because the manufacturer control-input characteristics include a VDD = 5 V test condition. The selected signal amplitudes, supply limits, logic thresholds, and analog terminal ratings must still meet the datasheet requirements. Use the detailed DC characteristic table for the exact VEE, VSS, and VDD configuration implemented on the board.
What is the best drop-in replacement for CD4053BCM?
CD74HC4053M is the leading drop-in candidate because it is identified as a 16-pin SOIC, triple 2:1 analog multiplexer with the same 16-terminal footprint. Other 16-pin options include CD74HC4053PWR and CD74HC4053. Before replacement, verify ON resistance, OFF leakage, supply range, logic thresholds, and enable polarity because matching the package alone does not guarantee equivalent signal behavior.
Can SN74LV4053A replace CD4053BCM?
SN74LV4053A can be considered as a 16-pin drop-in candidate because it was identified in a replacement discussion for the CD4053B family, but it should not be treated as automatically equivalent. Confirm its package drawing, terminal mapping, analog voltage limits, ON resistance, and control-input polarity against the CD4053BCM datasheet. The original CD4053BCM also provides a clearly documented 240 Ω ON-resistance value for comparison.
What is the best Texas Instruments equivalent for CD4053BCM?
CD74HC4053M is the best directly listed Texas Instruments candidate for a 16-pin SOIC footprint because the comparison identifies 16 pins, surface mounting, and SOIC-16 packaging for both devices. Its exact electrical ratings should be checked before approval because it belongs to a different CMOS logic family. The CD4053BCM’s 240 Ω ON resistance provides a concrete baseline for the substitution review.
Where can I buy CD4053BCM online?
Use the Request a Quote form on this page to ask for CD4053BCM availability, current lead time, and a quotation for the required quantity and package. The request can include the 16-SOIC suffix CD4053BCM so the manufacturer identity and ordering configuration remain unambiguous. Current commercial terms should be confirmed through the quotation rather than inferred from historical catalog availability.
How much does CD4053BCM cost and what is its lead time?
Use the Request a Quote form on this page for the current CD4053BCM price, stock position, minimum order quantity, and lead time. A quotation reflects the exact MPN, quantity, shipment destination, and requested delivery schedule. This avoids presenting an outdated catalog amount as current pricing and lets the supplier confirm whether the 16-SOIC configuration is available for the requested build.
Is CD4053BCM in stock?
Current CD4053BCM stock should be confirmed through the Request a Quote form on this page. Include the exact 16-SOIC MPN, required quantity, and target delivery date in the request. Because inventory can change independently of product lifecycle, the quotation response is the appropriate source for allocation, lead time, and shipment confirmation.

Data referensi kejuruteraan untuk CD4053BCM — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose CD4053BCM when the design needs three 2:1 analog switch sections, a documented 240 Ω ON resistance, and a 16-SOIC footprint with low OFF leakage. It is particularly suitable when analog channels must be selected together using common A, B, C, and INHIBIT controls. CD74HC4053M or CD74HC4053PWR may be preferable when their logic-family, supply-voltage, and electrical characteristics align better with a low-voltage digital system, but their ON resistance and OFF leakage must be compared with the CD4053BCM values before approval. SN74LV4053A is useful for low-voltage designs when its exact analog ratings and control polarity are confirmed. CD4053BMG4 offers a CD4053-family route when its suffix-specific electrical ratings match. Package compatibility is a starting point, not a complete approval: verify pin mapping, signal range, control thresholds, supply limits, and switching behavior.

Perbandingan dengan Gantian

Parametr Produk Ini CD74HC4053M CD74HC4053PWR CD74HC4053 SN74LV4053A CD4053BMG4
Brand onsemi Texas Instruments Texas Instruments Texas Instruments Texas Instruments Fairchild Semiconductor
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Pin Count 16 pins 16 pins 16 pins 16 pins 16 pins 16 pins
Multiplexer Configuration Triple 2:1 Triple 2:1 Triple 2:1 Triple 2:1 Triple 2:1 Triple 2:1
Technology CMOS Silicon-gate CMOS Silicon-gate CMOS CMOS Low-voltage CMOS CMOS
Control Inputs A, B, C, and INHIBIT Select and inhibit controls Select and inhibit controls Select and inhibit controls Select and inhibit controls A, B, C, and INHIBIT
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Penyeberangsung Jelas

  • Documented channel resistance (vsCD74HC4053M)
  • Matched 16-terminal footprint (vsCD74HC4053PWR)
  • Extended-temperature characterization (vsSN74LV4053A)

Catatan Desain

Route the three analog switch sections symmetrically and keep each common terminal close to its associated switched terminal. Place the INHIBIT and A/B/C traces away from sensitive analog paths, and terminate unused control inputs at a defined logic level. A continuous ground plane provides a low-impedance return for switching transients, while short traces reduce parasitic capacitance that can slow settling after an address change.

Connect the supply terminals according to the manufacturer’s recommended configuration and place the local bypass capacitor directly beside the power pins. Avoid adding large bulk capacitance directly across the switched analog nodes unless the application requires it, since excessive node capacitance increases settling time after a selection change. Validate signal swing, supply voltage, and logic thresholds together to ensure every addressed state remains inside the rated operating region.

Do not treat the 240 Ω ON resistance as suitable for every source impedance. A high-impedance sensor may require a buffer, and a long cable may require lower channel resistance or a different switch architecture. Also avoid leaving A, B, C, or INHIBIT floating. For each design, review the pin-description and DC electrical tables together because package matching alone does not establish logic-level or analog-range compatibility.

Keep switching transients away from reference, clock, and high-gain analog nodes. If the source impedance is high, the device’s OFF leakage and PCB contamination can influence node voltage, so protective guarding and clean assembly practices may matter. For fast settling requirements, measure the complete address-transition waveform with the intended source and load because the on-resistance alone does not determine channel settling time.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the referenced documentation excerpts. AEC-Q100 qualification is not applicable to this general-purpose interface IC.

Pencarian Berhubungan

CD4053BCM CD4053BCM datasheet CD4053BCM datasheet pdf CD4053BCM pinout CD4053BCM equivalent CD4053BCM replacement CD4053BCM cross reference CD4053BCM vs CD74HC4053M onsemi CD4053BCM CD4053BCM 240 ohm CD4053BCM 16-SOIC CD4053BCM price CD4053BCM stock CD4053BCM analog multiplexer application

Komponen dan Tanda berkaitan

onsemi CD4053BCM CD74HC4053M CD74HC4053PWR CD74HC4053 SN74LV4053A CD4053BMG4 analog multiplexer analog demultiplexer analog switch interface IC semiconductor CMOS low ON impedance low OFF leakage ON resistance INHIBIT control 16-SOIC SOIC family surface-mount package sensor multiplexing instrumentation routing test-system signal multiplexing data acquisition audio channel selection
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ