CY8C3665LTI-043 - 67MHz 32KB Flash 8-bit MCU | Infineon
MPN: CY8C3665LTI-043 ✓ Hoạt độngCY8C3665LTI-043 Tóm tắt
A programmable system-on-chip, or PSoC, is a mixed-signal microcontroller architecture that integrates processing, memory, and configurable peripheral functions. In the product hierarchy, PSoC 3 belongs to the broader family of flash-programmable system-on-chip devices, combining the capabilities of a microcontroller with application-specific analog and digital blocks. This integration can reduce external component count while allowing peripheral behavior to be adapted through firmware and device configuration.
The CY8C3665LTI-043 operates from 0.5 V to 5.5 V and provides 32 KB of flash in a 32K × 8 organization. Its 67 MHz clocking capability and 8051-compatible core support control workloads requiring responsive peripheral handling. The 68-QFN package also provides an exposed pad according to the device description, which supports PCB-level thermal management in compact embedded systems.
The PSoC architecture distinguishes this device from a conventional fixed-function 8-bit MCU by integrating configurable blocks for digital control and analog functions. The exact available block resources, converters, timers, and I/O assignments are determined by the CY8C36 family architecture and individual device configuration. Firmware therefore must account for the pin routing, interrupt behavior, clock settings, and resource allocation associated with the selected configuration.
Typical uses include industrial control modules, compact sensor nodes, low-power embedded instruments, and connected equipment requiring both digital control and analog signal conditioning. The wide 0.5 V to 5.5 V supply range also supports designs that operate across multiple low-voltage rails, although the selected external components and operating conditions must remain within the device's electrical limits.
For PCB implementation, use the manufacturer's land pattern for the 68-QFN package and connect the exposed pad according to the recommended land pattern and thermal guidance. Confirm every signal assignment against the CY8C36 family pin description before routing because configurable PSoC peripherals can assign functions to different physical pins. Decoupling capacitors should be placed close to the relevant supply pins, while programming and debug access must remain unobstructed during manufacturing.
This product page consolidates the key electrical characteristics, package information, sourcing workflow, drop-in comparison, and practical integration considerations for the CY8C3665LTI-043. It also distinguishes verified device facts from parameters that require confirmation in the family datasheet, helping engineers assess the device before beginning firmware and hardware design.
Bộ thay thế dễ dàng lắp đặt cho CY8C3665LTI-043 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CY8C3665LTI-043 (cùng hình factor và footprint) — khác nhau ở CPU Core, Flash Memory, Package, Product Type, Programmable Architecture.
CY8C3665LTI-044
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CY8C3665LTI-043 Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit PSoC 3 flash-programmable system-on-chip |
| CPU Core | 8051-compatible 8-bit core |
| Maximum CPU Frequency | 67 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 32K × 8 bits |
| Điện áp cung cấp hoạt động | 0.5 V to 5.5 V |
| Device Family | PSoC 3 CY8C36xx |
| Hộp | 68-QFN, 8 mm × 8 mm |
| Package Type | QFN |
| Kiểu lắp đặt | Surface mount |
| Exposed Pad | Present |
| Programmable Architecture | Configurable analog and digital peripheral blocks |
| Program Memory Type | Flash |
Hướng dẫn cấu hình chân CY8C3665LTI-043 qfn
Cấu hình chân cho CY8C3665LTI-043 (qfn gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho CY8C3665LTI-043.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CY8C3665LTI-043 phù hợp cho 6 Áp dụngs: Industrial Sensor Nodes, Compact Control Instruments, Low-Voltage Embedded Systems, Connected Equipment, Automated Test Equipment, Smart IoT Edge Devices.
Industrial Sensor Nodes
The CY8C3665LTI-043 fits compact sensor nodes that combine measurement, local processing, and digital control. Its 8051-compatible 8-bit core operates up to 67 MHz, while configurable analog and digital blocks can support signal conditioning and peripheral routing without relying entirely on fixed external logic. The 32 KB of flash provides storage for application firmware, configuration tables, and calibration data. At the board level, the 68-QFN 8 mm × 8 mm package supports compact layouts, although the exposed-pad land pattern must follow the manufacturer layout. Designers should verify the required I/O count, ADC performance, temperature limits, and power-domain constraints before assigning the sensor interface and communications pins.
Được đề xuất
Compact Control Instruments
The CY8C3665LTI-043 is suitable for compact instruments that coordinate front-panel controls, status indicators, sensors, and an embedded serial interface. The 67 MHz operating rate gives the 8051-compatible core more timing margin for routine control tasks than a basic low-speed controller. Its configurable peripheral blocks allow functions to be assigned according to the application rather than fixed entirely by dedicated pins. With 32 KB of flash, the device can hold the main control program and operating parameters. Engineering validation should include a worst-case timing review, peripheral resource mapping, brownout behavior, and a firmware update strategy suitable for field-maintained equipment.
Được đề xuất
Low-Voltage Embedded Systems
The CY8C3665LTI-043 can serve as the central controller in low-voltage equipment whose rails fall within the device's 0.5 V to 5.5 V operating range. Its 8-bit architecture and 32 KB flash provide a practical balance for embedded control functions, while the PSoC 3 peripheral architecture allows analog and digital resources to share the device. The controller should be configured only for supply domains supported by the selected device configuration, and signal-generator outputs must be checked against the appropriate voltage limits. Power budgeting should include the MCU, external loads, pull networks, and any attached sensor or communications circuitry rather than considering processor consumption alone.
Được đề xuất
Connected Equipment
The CY8C3665LTI-043 can coordinate local control functions in equipment that also communicates with a host or peripheral network. Its 8051-compatible core runs up to 67 MHz and can service protocol handling alongside control tasks, while the configurable PSoC blocks support digital I/O and analog functions on the same board. The 32 KB flash footprint is appropriate for applications with a focused firmware image, but protocol libraries, bootloader, and logging requirements must be included in the memory budget. Pin assignment should reserve the required communication and debug functions early, and the production design should verify programming access, clock accuracy, and system behavior across the intended voltage and temperature conditions.
Được đề xuất
Automated Test Equipment
The CY8C3665LTI-043 can support compact automated test equipment that coordinates stimulus, measurement, sequencing, and pass-fail logic. Its configurable analog and digital peripheral blocks make it useful when a design needs both control functions and analog interfacing, while the 67 MHz 8051-compatible core handles deterministic supervisory tasks. The 68-QFN package reduces board area compared with larger leaded devices, enabling denser instrument electronics. Signal integrity and measurement accuracy remain system-level concerns: developers should separate sensitive analog routing from switching activity, confirm converter performance for the selected configuration, and validate timing margins under the maximum test-channel loading.
Được đề xuất
Smart IoT Edge Devices
The CY8C3665LTI-043 is appropriate for small IoT edge devices that perform local sensing, filtering, actuator control, or protocol handling instead of relying entirely on a remote service. Its 32 KB of flash supports a focused embedded application, and its configurable analog and digital blocks can consolidate functions around the 8051-compatible core. The wide 0.5 V to 5.5 V operating range can simplify integration with low-energy circuitry. Product engineers should calculate the complete sleep and active power budget, account for radio and sensor loads, and use the peripheral routing capabilities carefully. Firmware updates and recovery behavior also need validation because interrupt timing and peripheral allocation can change the control response during maintenance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CY8C3665LTI-043 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CY8C3665LTI-044 |
|---|---|---|
| Package | 68-QFN, 8 mm × 8 mm | 44-pin TQFP; package descriptions require confirmation |
| Brand | Infineon Technologies | Infineon Technologies |
| CPU Core | 8051-compatible 8-bit core | 8051-compatible 8-bit core |
| Maximum CPU Frequency | 67 MHz | 67 MHz |
| Flash Memory | 32 KB, 32K × 8 | 32 KB |
| Product Family | PSoC 3 CY8C36xx | PSoC 36xxx |
| Programmable Peripheral Architecture | Configurable analog and digital blocks | PSoC 3 configurable architecture |
| Mounting Type | Surface mount | Surface mount |
Bảo phân biệt quan trọng
- Compact 68-QFN implementation (vsCY8C3665LTI-044)
- High clock rate for an 8-bit PSoC 3 controller (vsCY8C3665LTI-044)
- 32 KB flash with configurable peripheral resources (vsCY8C3665LTI-044)
Ghi chú thiết kế
Use the manufacturer land pattern for the CY8C3665LTI-043 68-QFN package and preserve the exposed-pad geometry and paste mask. Keep decoupling components close to the associated supply pins, and route sensitive analog signals away from fast-changing digital and return-current paths. Confirm the pad numbering and alternate peripheral functions against the family pin table before releasing artwork, because PSoC routing options can change the function of a physical terminal.
Budget the supply system for the MCU and every attached load rather than the controller alone. The device supports a 0.5 V to 5.5 V operating range, but the valid configuration must match the selected supply domains. Check startup, brownout, and power-sequencing requirements for downstream circuits, and verify that external pull networks and sensors do not create sustained current paths between supply domains when the MCU enters a low-power state.
Plan configurable peripheral assignments before committing the PCB. Reserve pins required by communications, programming, debug, and critical interrupts, then review the resulting boot and application behavior. Use the exposed pad for the manufacturer's specified thermal and electrical land-pattern connection. A prototype should be checked for signal integrity, temperature rise, and correct function across the intended supply voltage before the layout is released for volume production.
Do not treat every member of the CY8C36 family as a footprint-compatible substitute. The package-code and ordering suffix can change the physical terminal arrangement, and a related 8051 core or identical 32 KB flash capacity does not by itself prove pin compatibility. Verify the exact orderable MPN, package drawing, pin table, speed grade, temperature grade, and exposed-pad connection before approving a replacement or second-source arrangement.
Thông tin tuân thủ
Compliance declarations are not stated in the cited device information and must be confirmed for the exact orderable MPN.