CY8C3665PVI-049 - 67MHz 32KB 8-Bit PSoC | Infineon
MPN: CY8C3665PVI-049 ✓ AktifCY8C3665PVI-049 Ringkasan
A programmable system-on-chip, or PSoC, is a mixed-signal microcontroller that combines a CPU core with configurable analog blocks, digital peripherals, and programmable connectivity. The CY8C3665 belongs to the PSoC 3 family and the broader embedded-control hierarchy of microcontroller, embedded processor, and semiconductor. This integration allows designers to implement control, sensing, and communication functions with fewer external components than a discrete MCU-plus-peripheral design.
The device provides 32KB of flash organized as 32K × 8 bits, an 8-bit CPU architecture, and operation up to 67MHz. The related CY8C3665PVI-008 device is identified with a 12-bit ADC, indicating the family's analog conversion capability. Its 48-BSSOP package has a stated body width of 0.295 inches, or 7.50mm, and is suitable for compact embedded assemblies using standard surface-mount production methods.
The PSoC architecture can combine a fast 8051 core with programmable digital functions and analog peripherals. This mixed-signal approach is useful when the design must measure an analog input, process it digitally, and communicate results through general-purpose I/O. Programmable peripherals also permit hardware adaptation after pin planning, reducing the need for separate logic ICs when board requirements evolve.
Typical uses include industrial control modules, compact sensor interfaces, building and appliance controls, instrument panels, and low-cost embedded products requiring mixed-signal capability. For communication-heavy products, the CY8C3665 can be combined with dedicated serial-interface transceivers. For analog measurement, it can pair with external precision converters when higher resolution, lower noise, or channel count beyond the integrated resources is required.
PCB design should preserve the manufacturer's recommended decoupling and programming-interface layout. Place the supply capacitors close to the device, maintain the specified voltage and operating limits, and route the programming signals to accessible test points. The 48-BSSOP footprint has a relatively fine lead pitch, so inspect solder paste volume and reflow profile to avoid bridging.
This page combines package, memory, processor, and programming information with practical replacement guidance. It also distinguishes direct same-package options from parts that require changes to temperature grade, qualification, or PCB layout, helping engineers shorten sourcing and design-validation time.
Pilihan pengganti yang segera untuk CY8C3665PVI-049 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera CY8C3665PVI-049 (sama faktor bentuk dan kaki) — berbeza dalam Product Type, Package, ADC Resolution, Flash Memory, CPU Architecture.
CY8C3665PVI-008
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →CY8C3665PVA-049
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CY8C3665PVI-049 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Programmable System-on-Chip (PSoC 3) |
| Microcontroller Core | 8-bit 8051 |
| Maximum CPU Frequency | 67 MHz |
| Program Memory | 32KB flash (32K × 8 bits) |
| Tegangan Pemberi Arus Operasi | 3.3 V |
| ADC Resolution | 12-bit ADC in the related CY8C3665PVI-008 device |
| Kemasan | 48-BSSOP (0.295 inch, 7.50mm width) |
| Bilangan Pin | 48 pins |
| Jenis Pemasangan | Surface mount |
| Programming Interface | ISP-SWD |
| Product Family | PSoC 3 CY8C36xx |
Panduan Konfigurasi Pin CY8C3665PVI-049 48-bssop (0.295 inch, 7.50mm width)
Konfigurasi pin untuk CY8C3665PVI-049 (48-bssop (0.295 inch, 7.50mm width) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk CY8C3665PVI-049.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
CY8C3665PVI-049 patut untuk 6 aplikasis: Industrial Sensor Interface, Building and Appliance Control, Industrial Communication Module, Portable Measurement Device, LED Lighting Controller, Programmable Control Panel.
Industrial Sensor Interface
The CY8C3665PVI-049 fits compact sensor-interface modules because its 67MHz 8-bit 8051 core can process control logic while the PSoC architecture combines digital peripherals with analog conversion capability. The related device documentation identifies a 12-bit ADC, allowing moderate-resolution measurements to be integrated with thresholding, filtering, and actuator control. A 48-BSSOP package also preserves board area in distributed sensing equipment. When analog accuracy or input count exceeds the integrated converter's capability, an external precision ADC can be added while the microcontroller retains control, data processing, and communications functions.
Disebarkan
Building and Appliance Control
The CY8C3665PVI-049 is appropriate for compact building-control and appliance modules that combine local decision logic with analog sensing. Its 32KB flash stores firmware for sequencing, debouncing, fault handling, and communication updates, while the 67MHz 8051 core provides ample timing margin for peripheral servicing. Programmable PSoC resources can reduce the component count in products requiring several digital functions around an analog input. For a new design, confirm the exact temperature range, supply tolerances, and available I/O against the manufacturer ordering information before production release.
Disebarkan
Industrial Communication Module
The CY8C3665PVI-049 can serve as the control engine in a compact industrial communication module because its PSoC resources combine an 8051 core, flash, programmable digital blocks, and analog functions. The microcontroller can supervise configuration, status reporting, and local I/O while an external transceiver handles the physical communication layer. The 48-BSSOP package allows the logic section to remain close to the transceiver and connector. Interface timing, electrical levels, isolation, surge requirements, and the final operating-temperature grade must be validated as a complete subsystem rather than inferred from the microcontroller alone.
Disebarkan
Portable Measurement Device
The CY8C3665PVI-049 fits portable measurement instruments where an 8-bit mixed-signal controller can reduce board count without sacrificing local processing. Its 67MHz core supports responsive control loops, and the PSoC family's analog blocks permit sensor conditioning and conversion alongside digital functions. The 32KB flash capacity provides space for calibration data, operating modes, and firmware, although memory requirements should be checked against the final application. Battery-powered designs also need careful review of sleep behavior, active current, analog accuracy, and thermal drift before selecting the exact ordering code.
Disebarkan
LED Lighting Controller
The CY8C3665PVI-049 can implement a compact LED-lighting controller because its programmable digital blocks are suited to timing, pulse-width control, and sequencing, while its mixed-signal architecture can support current or temperature sensing. The 8-bit core can coordinate dimming commands, fault handling, and communication updates, and the 48-BSSOP package helps limit board area. LED drivers normally require external power transistors, current-sense components, and protection circuitry. Confirm whether the integrated ADC and operating limits satisfy the sensing scheme, and validate the thermal design at the highest intended LED drive current.
Disebarkan
Programmable Control Panel
The CY8C3665PVI-049 is well suited to a compact programmable control panel because its 67MHz 8-bit core can handle button scanning, display updates, menu logic, and communication while programmable analog and digital blocks support mixed I/O requirements. The 32KB flash stores application firmware and configuration, and the 48-BSSOP package provides a compact footprint for embedded user interfaces. An I/O expander can add display or button pins when required. Review pin multiplexing, boot behavior, programming access, and the exact temperature grade because panel environments vary considerably in heat exposure.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CY8C3665PVI-049 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CY8C3665PVI-008 | CY8C3665PVA-049 |
|---|---|---|---|
| Package | 48-BSSOP | 48-BSSOP - same package | 48-SSOP - same package |
| Brand | Infineon | Infineon | Infineon |
| Product Type | PSoC 3 programmable system-on-chip | PSoC 3 programmable system-on-chip | PSoC 3 programmable system-on-chip |
| CPU Core | 8-bit 8051 | 8051 | 8051 |
| Maximum CPU Frequency | 67 MHz | 67 MHz | 67 MHz |
| Flash Memory | 32KB (32K × 8 bits) | 32KB | 32KB (32K × 8 bits) |
| Ordering Suffix | -049 | -008 | -049 |
Penyeberangsung Jelas
- Compact mixed-signal integration (vsCY8C3665PVA-049)
- Same-family ordering compatibility (vsCY8C3665PVI-008)
- Mixed-signal PSoC functionality (vsCY8C3665PVA-049)
Catatan Desain
Use the manufacturer BSSOP land pattern and place the required supply capacitors directly beside the power and ground pins. Keep sensitive analog inputs away from high-current switching nodes and digital clock routes. Because the 48-BSSOP lead pitch is relatively fine, verify paste volume, stencil apertures, and the reflow profile during assembly qualification to reduce bridging risk.
Preserve clean access to the ISP-SWD programming signals and include test pads that can be reached by the production fixture. Avoid routing communications or high-speed external signals beneath the MCU unless the board stack-up and return path have been evaluated. Maintain a continuous ground reference for analog and digital sections and place decoupling capacitance where its connection impedance is minimized.
Do not treat the -008 and PVA ordering codes as automatic substitutions merely because they use the same package. Compare operating temperature, qualification, supply limits, pin multiplexing, and any orderable option. The CY8C3665PVI-049 and CY8C3665PVA-049 listings do not expose a complete comparison matrix, so release a substitution only after checking the manufacturer ordering information and completing the required design verification.
Follow the datasheet's power-supply sequencing and decoupling requirements exactly. Evaluate startup behavior if the PSoC controls loads or sensors through programmable pins. For battery-powered products, measure both active and sleep-mode current across voltage and temperature, because clock frequency and analog-block activity can materially affect the system energy budget even when the 8-bit core itself is efficient.
Maklumat Kesediaan
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are exposed in the product information used for this record.