Infineon

CY8C3665PVI-049 - 67MHz 32KB 8-Bit PSoC | Infineon

Teilenummer: CY8C3665PVI-049 ✓ Aktiv
3.3 V Vdss 48-BSSOP (0.295 inch, 7.50mm width) Package 67 MHz Speed 32KB flash (32K × 8 bits) Memory
MOQ: 1 |

CY8C3665PVI-049 Übersicht

The Infineon CY8C3665PVI-049 is a PSoC 3 programmable system-on-chip combining an 8-bit 8051 microcontroller, 32KB flash memory, and programmable analog and digital resources in a 48-BSSOP package. It operates at up to 67MHz and is identified as a 3.3V device in the product listing.

A programmable system-on-chip, or PSoC, is a mixed-signal microcontroller that combines a CPU core with configurable analog blocks, digital peripherals, and programmable connectivity. The CY8C3665 belongs to the PSoC 3 family and the broader embedded-control hierarchy of microcontroller, embedded processor, and semiconductor. This integration allows designers to implement control, sensing, and communication functions with fewer external components than a discrete MCU-plus-peripheral design.

The device provides 32KB of flash organized as 32K × 8 bits, an 8-bit CPU architecture, and operation up to 67MHz. The related CY8C3665PVI-008 device is identified with a 12-bit ADC, indicating the family's analog conversion capability. Its 48-BSSOP package has a stated body width of 0.295 inches, or 7.50mm, and is suitable for compact embedded assemblies using standard surface-mount production methods.

The PSoC architecture can combine a fast 8051 core with programmable digital functions and analog peripherals. This mixed-signal approach is useful when the design must measure an analog input, process it digitally, and communicate results through general-purpose I/O. Programmable peripherals also permit hardware adaptation after pin planning, reducing the need for separate logic ICs when board requirements evolve.

Typical uses include industrial control modules, compact sensor interfaces, building and appliance controls, instrument panels, and low-cost embedded products requiring mixed-signal capability. For communication-heavy products, the CY8C3665 can be combined with dedicated serial-interface transceivers. For analog measurement, it can pair with external precision converters when higher resolution, lower noise, or channel count beyond the integrated resources is required.

PCB design should preserve the manufacturer's recommended decoupling and programming-interface layout. Place the supply capacitors close to the device, maintain the specified voltage and operating limits, and route the programming signals to accessible test points. The 48-BSSOP footprint has a relatively fine lead pitch, so inspect solder paste volume and reflow profile to avoid bridging.

This page combines package, memory, processor, and programming information with practical replacement guidance. It also distinguishes direct same-package options from parts that require changes to temperature grade, qualification, or PCB layout, helping engineers shorten sourcing and design-validation time.

Drop-in-Alternativen für CY8C3665PVI-049 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit CY8C3665PVI-049 (gleiche Bauform und Footprint) – abweichend in Product Type, Package, ADC Resolution, Flash Memory, CPU Architecture.

Cypress Semiconductor
Product Type: 8-bit programmable system-on-chip (PSoC)
Package: 48-SSOP
Flash Memory: 32 KB
Vergleichen mit CY8C3665PVI-049 →
Infineon
Product Type: PSoC 3 programmable system-on-chip
Package: 48-SSOP
ADC Resolution: 12 bit
Vergleichen mit CY8C3665PVI-049 →
Infineon
Product Type: 8-bit PSoC 3 programmable system-on-chip
Package: 48-pin SSOP
ADC Resolution: 12 bits
Vergleichen mit CY8C3665PVI-049 →
Infineon
Product Type: 8-bit programmable system-on-chip microcontroller
Package: 48-pin SSOP
Flash Memory: 32 KB
Vergleichen mit CY8C3665PVI-049 →

CY8C3665PVI-008

✅ Drop-In
Infineon
📦 48-BSSOP
8-bit PSoC 3 programmable system-on-chip · 8051, single core · 67 MHz · Flash · 32 KB (32K x 8 bits) · 4 KB · 1 KB · 8 KB

Preis auf Anfrage

Datenblatt ansehen →

CY8C3665PVA-049

✅ Drop-In
📦 48-SSOP
Same 8-bit 8051 core, 32KB flash, and 48-SSOP package; the A suffix indicates a different ordering qualification that must be verified.

📋 Referenzalternative (nicht im Katalog)

CY8C3665PVI-049 Grenzwerte & elektrische Eigenschaften

Product Type Programmable System-on-Chip (PSoC 3)
Microcontroller Core 8-bit 8051
Maximum CPU Frequency 67 MHz
Program Memory 32KB flash (32K × 8 bits)
Betriebsversorgungsspannung 3.3 V
ADC Resolution 12-bit ADC in the related CY8C3665PVI-008 device
Gehäuse 48-BSSOP (0.295 inch, 7.50mm width)
Anzahl der Pins 48 pins
Montageart Surface mount
Programming Interface ISP-SWD
Product Family PSoC 3 CY8C36xx

CY8C3665PVI-049 48-bssop (0.295 inch, 7.50mm width) Pinbelegungsleitfaden

Pinbelegung für CY8C3665PVI-049 (48-bssop (0.295 inch, 7.50mm width)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für CY8C3665PVI-049 im 48-bssop (0.295 inch, 7.50mm width)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für CY8C3665PVI-049.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

CY8C3665PVI-049 ist geeignet für 6 Anwendungs: Industrial Sensor Interface, Building and Appliance Control, Industrial Communication Module, Portable Measurement Device, LED Lighting Controller, Programmable Control Panel.

🏭

Industrial Sensor Interface

The CY8C3665PVI-049 fits compact sensor-interface modules because its 67MHz 8-bit 8051 core can process control logic while the PSoC architecture combines digital peripherals with analog conversion capability. The related device documentation identifies a 12-bit ADC, allowing moderate-resolution measurements to be integrated with thresholding, filtering, and actuator control. A 48-BSSOP package also preserves board area in distributed sensing equipment. When analog accuracy or input count exceeds the integrated converter's capability, an external precision ADC can be added while the microcontroller retains control, data processing, and communications functions.

🏠

Building and Appliance Control

The CY8C3665PVI-049 is appropriate for compact building-control and appliance modules that combine local decision logic with analog sensing. Its 32KB flash stores firmware for sequencing, debouncing, fault handling, and communication updates, while the 67MHz 8051 core provides ample timing margin for peripheral servicing. Programmable PSoC resources can reduce the component count in products requiring several digital functions around an analog input. For a new design, confirm the exact temperature range, supply tolerances, and available I/O against the manufacturer ordering information before production release.

🌐

Industrial Communication Module

The CY8C3665PVI-049 can serve as the control engine in a compact industrial communication module because its PSoC resources combine an 8051 core, flash, programmable digital blocks, and analog functions. The microcontroller can supervise configuration, status reporting, and local I/O while an external transceiver handles the physical communication layer. The 48-BSSOP package allows the logic section to remain close to the transceiver and connector. Interface timing, electrical levels, isolation, surge requirements, and the final operating-temperature grade must be validated as a complete subsystem rather than inferred from the microcontroller alone.

📱

Portable Measurement Device

The CY8C3665PVI-049 fits portable measurement instruments where an 8-bit mixed-signal controller can reduce board count without sacrificing local processing. Its 67MHz core supports responsive control loops, and the PSoC family's analog blocks permit sensor conditioning and conversion alongside digital functions. The 32KB flash capacity provides space for calibration data, operating modes, and firmware, although memory requirements should be checked against the final application. Battery-powered designs also need careful review of sleep behavior, active current, analog accuracy, and thermal drift before selecting the exact ordering code.

💡

LED Lighting Controller

The CY8C3665PVI-049 can implement a compact LED-lighting controller because its programmable digital blocks are suited to timing, pulse-width control, and sequencing, while its mixed-signal architecture can support current or temperature sensing. The 8-bit core can coordinate dimming commands, fault handling, and communication updates, and the 48-BSSOP package helps limit board area. LED drivers normally require external power transistors, current-sense components, and protection circuitry. Confirm whether the integrated ADC and operating limits satisfy the sensing scheme, and validate the thermal design at the highest intended LED drive current.

🖥️

Programmable Control Panel

The CY8C3665PVI-049 is well suited to a compact programmable control panel because its 67MHz 8-bit core can handle button scanning, display updates, menu logic, and communication while programmable analog and digital blocks support mixed I/O requirements. The 32KB flash stores application firmware and configuration, and the 48-BSSOP package provides a compact footprint for embedded user interfaces. An I/O expander can add display or button pins when required. Review pin multiplexing, boot behavior, programming access, and the exact temperature grade because panel environments vary considerably in heat exposure.

What is the CY8C3665PVI-049?
The CY8C3665PVI-049 is a PSoC 3 programmable system-on-chip with an 8-bit 8051 core, 32KB flash, operation up to 67MHz, and a 48-BSSOP package. According to the Infineon product listing, it is a 3.3V microcontroller combining programmable digital and analog resources. This makes it suitable for compact products that need embedded control, signal measurement, and configurable peripherals in one device.
What are the key specifications of CY8C3665PVI-049 that engineers should know?
The principal specifications are an 8-bit 8051 core, 67MHz maximum operating frequency, 32KB flash organized as 32K × 8 bits, and a 48-BSSOP package. The manufacturer listing also identifies a 3.3V operating supply and a package width of 0.295 inches, or 7.50mm. The related -008 ordering code documents a 12-bit ADC, making this family appropriate for compact mixed-signal control systems.
Where can I download the CY8C3665PVI-049 datasheet PDF?
The CY8C3665PVI-049 datasheet can be accessed through the Cypress PSoC datasheet page identified in the product links. Use the manufacturer document for the definitive pin table, electrical limits, memory map, programming instructions, and package drawings. The linked all-datasheet result provides access to the same CY8C3665PVI-049 document and is useful for quick review, while the Infineon product page provides current ordering information.
Where can I find the CY8C3665PVI-049 pinout?
The CY8C3665PVI-049 pinout is found in the package-pin table of the manufacturer datasheet, which covers all 48 leads of the BSSOP package. The available product information confirms a 48-BSSOP package but does not reproduce individual pin names, so the pin-description table must be used when assigning PCB nets. Pay particular attention to supply, ground, programming, reset, clock, and exposed analog or digital peripheral assignments.
Which programming interface does CY8C3665PVI-049 use?
The CY8C3665PVI-049 is identified as supporting ISP-SWD programming. This means production programming and in-circuit debugging can use the device's serial programming and serial-wire debugging interface. Preserve access to the programming signals in the PCB layout, add practical test points where space permits, and verify the recommended pull states and voltage levels against the manufacturer programming documentation before creating the manufacturing fixture.
What can replace the CY8C3665PVI-049?
The CY8C3665PVI-008 is a same-family replacement candidate because it retains the 8051 core, 32KB flash, 12-bit ADC, and 48-BSSOP package. It should be selected only after checking its temperature range and ordering information against the -049. The CY8C3665PVA-049 also uses the 48-SSOP package, but its qualification and temperature details must be reviewed before treating it as an unqualified drop-in substitute.
Can CY8C3665PVA-049 replace CY8C3665PVI-049?
The CY8C3665PVA-049 is a possible same-package alternative because it is listed as an 8051 PSoC 3 device with 32KB flash in 48-SSOP. However, the visible listing does not establish that its temperature grade or qualification matches the -049 exactly. Treat it as a conditional replacement and review the manufacturer ordering table, operating-temperature limits, and any automotive qualification requirements before releasing it to production.
Is CY8C3665PVI-049 the same as CY8C3665PVI-008?
No, the two ordering codes are related but should not be assumed identical. Both are CY8C3665 PSoC 3 devices with an 8-bit 8051 core, 32KB flash, a 12-bit ADC, and a 48-BSSOP package. The -049 and -008 suffixes represent different ordering configurations, so temperature range, qualification, or other orderable parameters must be checked in the manufacturer documentation before substitution.
When should I choose CY8C3665PVI-049 over CY8C3665PVI-008?
Choose the CY8C3665PVI-049 when its ordering configuration matches the required industrial operating conditions and qualification of the finished product. Choose the -008 only when its documented temperature range and other orderable parameters satisfy the application. Both retain the same core, flash density, ADC resolution, and package, making the decision primarily a matter of the exact ordering code rather than basic computational capacity.
What is the difference between CY8C3665PVI-049 and CY8C3665PVA-049?
The confirmed difference is the ordering suffix: the target is CY8C3665PVI-049, while the comparison part is CY8C3665PVA-049. Both are listed as 8-bit 8051 PSoC 3 devices with 32KB flash in 48-SSOP packaging. The visible records do not provide the complete temperature and qualification matrices, so use the manufacturer ordering information to identify the exact difference before replacing one with the other.
Is CY8C3665PVI-049 suitable for industrial control and sensor applications?
The CY8C3665PVI-049 is suitable for compact embedded-control and mixed-signal sensor designs because it combines a 67MHz 8-bit 8051 core with 32KB flash and programmable analog and digital resources. Its 48-BSSOP package supports dense surface-mount layouts. Final suitability depends on the required temperature range, supply tolerance, EMC environment, and any application-specific qualification, which should be checked against the ordering documentation.
Where to buy CY8C3665PVI-049 online?
Use the Request a Quote form on this page to request CY8C3665PVI-049 availability, current commercial terms, and a formal quotation. The product appears in multiple catalog listings, but a distributor listing alone does not confirm allocation for the requested quantity. Include your required quantity, date code preference, target package, and any production or inspection requirements with the request.
What is the price of CY8C3665PVI-049?
The current commercial price for CY8C3665PVI-049 is not stated on this page because it can change with quantity, availability, and sourcing conditions. Submit a Request a Quote with the required order quantity and packaging expectations to receive current pricing and lead-time terms. Do not use historical distributor pricing as a binding quotation or assume that an archived listing reflects current inventory.
What is the lead time for CY8C3665PVI-049?
The lead time for CY8C3665PVI-049 should be confirmed through the Request a Quote form on this page. A catalog result shows an estimated delivery interval, but the interval is not a guaranteed factory lead time and may not account for exact quantity, traceability, or date-code requirements. Provide the planned schedule and quantity so the supplier can confirm the most relevant availability window.
Is CY8C3665PVI-049 currently in stock?
Current stock status for CY8C3665PVI-049 should be confirmed through the Request a Quote form on this page. One catalog listing reports a large quantity, but that figure can be a marketplace inventory figure rather than factory stock. Ask for the exact package, quantity, date code, and ship-to region so the quotation reflects usable supply rather than an uncommitted aggregate count.
What is the best Infineon equivalent for CY8C3665PVI-049?
The CY8C3665PVI-008 is the closest identified same-family alternative because it retains the 8-bit 8051 core, 32KB flash, 12-bit ADC, and 48-BSSOP format. The CY8C3665PVA-049 is another same-package ordering option, but its qualification and temperature characteristics require confirmation. The closest device is not automatically the best production substitute until all orderable parameters and operating limits match.

Technische Referenzdaten für CY8C3665PVI-049 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the CY8C3665PVI-049 when the design requires a compact 48-BSSOP PSoC with an 8-bit 8051 core, 67MHz performance, 32KB flash, and mixed-signal programmability. It is particularly suitable for sensor interfaces, appliance controls, compact communication modules, and programmable panels where analog measurement and digital control must share one device. Consider the CY8C3665PVI-008 when its -008 ordering configuration satisfies the temperature and qualification requirements while retaining the same core, flash density, ADC resolution, and package. Consider the CY8C3665PVA-049 when its qualification and operating-temperature characteristics fit the application and the same 48-SSOP footprint is acceptable. For any substitution, verify supply limits, pin multiplexing, programming behavior, qualification, and production availability before updating the BOM.

Vergleich mit Alternativen

Parameter Dieses Produkt CY8C3665PVI-008 CY8C3665PVA-049
Package 48-BSSOP 48-BSSOP - same package 48-SSOP - same package
Brand Infineon Infineon Infineon
Product Type PSoC 3 programmable system-on-chip PSoC 3 programmable system-on-chip PSoC 3 programmable system-on-chip
CPU Core 8-bit 8051 8051 8051
Maximum CPU Frequency 67 MHz 67 MHz 67 MHz
Flash Memory 32KB (32K × 8 bits) 32KB 32KB (32K × 8 bits)
Ordering Suffix -049 -008 -049

Wichtigste Unterscheidungsmerkmale

  • Compact mixed-signal integration (vs. CY8C3665PVA-049)
  • Same-family ordering compatibility (vs. CY8C3665PVI-008)
  • Mixed-signal PSoC functionality (vs. CY8C3665PVA-049)

Designhinweise

Use the manufacturer BSSOP land pattern and place the required supply capacitors directly beside the power and ground pins. Keep sensitive analog inputs away from high-current switching nodes and digital clock routes. Because the 48-BSSOP lead pitch is relatively fine, verify paste volume, stencil apertures, and the reflow profile during assembly qualification to reduce bridging risk.

Preserve clean access to the ISP-SWD programming signals and include test pads that can be reached by the production fixture. Avoid routing communications or high-speed external signals beneath the MCU unless the board stack-up and return path have been evaluated. Maintain a continuous ground reference for analog and digital sections and place decoupling capacitance where its connection impedance is minimized.

Do not treat the -008 and PVA ordering codes as automatic substitutions merely because they use the same package. Compare operating temperature, qualification, supply limits, pin multiplexing, and any orderable option. The CY8C3665PVI-049 and CY8C3665PVA-049 listings do not expose a complete comparison matrix, so release a substitution only after checking the manufacturer ordering information and completing the required design verification.

Follow the datasheet's power-supply sequencing and decoupling requirements exactly. Evaluate startup behavior if the PSoC controls loads or sensors through programmable pins. For battery-powered products, measure both active and sleep-mode current across voltage and temperature, because clock frequency and analog-block activity can materially affect the system energy budget even when the 8-bit core itself is efficient.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are exposed in the product information used for this record.

Daten verifiziert am: 2026-11-19 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

CY8C3665PVI-049 datasheet CY8C3665PVI-049 pinout CY8C3665PVI-049 datasheet pdf CY8C3665PVI-049 specifications CY8C3665PVI-049 equivalent CY8C3665PVI-049 replacement CY8C3665PVI-049 cross reference CY8C3665PVI-049 footprint CY8C3665PVI-049 price CY8C3665PVI-049 stock Infineon CY8C3665PVI-049 CY8C3665PVI-049 vs CY8C3665PVI-008 CY8C3665PVI-049 ISP-SWD programming CY8C3665 48-BSSOP microcontroller

Verwandte Bauteile & Begriffe

Infineon Cypress Semiconductor CY8C3665PVI-049 CY8C3665PVI-008 CY8C3665PVA-049 PSoC 3 PSoC microcontroller embedded processor semiconductor 8051 MCU core programmable system-on-chip mixed-signal microcontroller 32KB flash 12-bit ADC 67MHz 3.3V 48-BSSOP 48-SSOP surface mount ISP-SWD programmable analog blocks programmable digital peripherals industrial control sensor interface
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen