CY8C3665PVI-049 - 67MHz 32KB 8-Bit PSoC | Infineon
MPN: CY8C3665PVI-049 ✓ 啟用中CY8C3665PVI-049 概覽
A programmable system-on-chip, or PSoC, is a mixed-signal microcontroller that combines a CPU core with configurable analog blocks, digital peripherals, and programmable connectivity. The CY8C3665 belongs to the PSoC 3 family and the broader embedded-control hierarchy of microcontroller, embedded processor, and semiconductor. This integration allows designers to implement control, sensing, and communication functions with fewer external components than a discrete MCU-plus-peripheral design.
The device provides 32KB of flash organized as 32K × 8 bits, an 8-bit CPU architecture, and operation up to 67MHz. The related CY8C3665PVI-008 device is identified with a 12-bit ADC, indicating the family's analog conversion capability. Its 48-BSSOP package has a stated body width of 0.295 inches, or 7.50mm, and is suitable for compact embedded assemblies using standard surface-mount production methods.
The PSoC architecture can combine a fast 8051 core with programmable digital functions and analog peripherals. This mixed-signal approach is useful when the design must measure an analog input, process it digitally, and communicate results through general-purpose I/O. Programmable peripherals also permit hardware adaptation after pin planning, reducing the need for separate logic ICs when board requirements evolve.
Typical uses include industrial control modules, compact sensor interfaces, building and appliance controls, instrument panels, and low-cost embedded products requiring mixed-signal capability. For communication-heavy products, the CY8C3665 can be combined with dedicated serial-interface transceivers. For analog measurement, it can pair with external precision converters when higher resolution, lower noise, or channel count beyond the integrated resources is required.
PCB design should preserve the manufacturer's recommended decoupling and programming-interface layout. Place the supply capacitors close to the device, maintain the specified voltage and operating limits, and route the programming signals to accessible test points. The 48-BSSOP footprint has a relatively fine lead pitch, so inspect solder paste volume and reflow profile to avoid bridging.
This page combines package, memory, processor, and programming information with practical replacement guidance. It also distinguishes direct same-package options from parts that require changes to temperature grade, qualification, or PCB layout, helping engineers shorten sourcing and design-validation time.
直接替換替代品,適用於 CY8C3665PVI-049 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: CY8C3665PVI-049 (相同外形與佔位) — 差異在於 Product Type, Package, ADC Resolution, Flash Memory, CPU Architecture.
CY8C3665PVI-008
✅ 直接替換聯絡詢價
查看資料表 →CY8C3665PVA-049
✅ 直接替換📋 參考替代品(不在目錄中)
CY8C3665PVI-049 最大額定值與電氣特性
| Product Type | Programmable System-on-Chip (PSoC 3) |
| Microcontroller Core | 8-bit 8051 |
| Maximum CPU Frequency | 67 MHz |
| Program Memory | 32KB flash (32K × 8 bits) |
| 工作電源電壓 | 3.3 V |
| ADC Resolution | 12-bit ADC in the related CY8C3665PVI-008 device |
| 封裝 | 48-BSSOP (0.295 inch, 7.50mm width) |
| 腳位數 | 48 pins |
| 安裝類型 | Surface mount |
| Programming Interface | ISP-SWD |
| Product Family | PSoC 3 CY8C36xx |
CY8C3665PVI-049 48-bssop (0.295 inch, 7.50mm width) 腳位配置指南
CY8C3665PVI-049(48-bssop (0.295 inch, 7.50mm width) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CY8C3665PVI-049.
請參閱 資料表 以查看完整腳位配置。
典型應用
CY8C3665PVI-049 適用於 6 應用s: Industrial Sensor Interface, Building and Appliance Control, Industrial Communication Module, Portable Measurement Device, LED Lighting Controller, Programmable Control Panel.
Industrial Sensor Interface
The CY8C3665PVI-049 fits compact sensor-interface modules because its 67MHz 8-bit 8051 core can process control logic while the PSoC architecture combines digital peripherals with analog conversion capability. The related device documentation identifies a 12-bit ADC, allowing moderate-resolution measurements to be integrated with thresholding, filtering, and actuator control. A 48-BSSOP package also preserves board area in distributed sensing equipment. When analog accuracy or input count exceeds the integrated converter's capability, an external precision ADC can be added while the microcontroller retains control, data processing, and communications functions.
推薦
Building and Appliance Control
The CY8C3665PVI-049 is appropriate for compact building-control and appliance modules that combine local decision logic with analog sensing. Its 32KB flash stores firmware for sequencing, debouncing, fault handling, and communication updates, while the 67MHz 8051 core provides ample timing margin for peripheral servicing. Programmable PSoC resources can reduce the component count in products requiring several digital functions around an analog input. For a new design, confirm the exact temperature range, supply tolerances, and available I/O against the manufacturer ordering information before production release.
推薦
Industrial Communication Module
The CY8C3665PVI-049 can serve as the control engine in a compact industrial communication module because its PSoC resources combine an 8051 core, flash, programmable digital blocks, and analog functions. The microcontroller can supervise configuration, status reporting, and local I/O while an external transceiver handles the physical communication layer. The 48-BSSOP package allows the logic section to remain close to the transceiver and connector. Interface timing, electrical levels, isolation, surge requirements, and the final operating-temperature grade must be validated as a complete subsystem rather than inferred from the microcontroller alone.
推薦
Portable Measurement Device
The CY8C3665PVI-049 fits portable measurement instruments where an 8-bit mixed-signal controller can reduce board count without sacrificing local processing. Its 67MHz core supports responsive control loops, and the PSoC family's analog blocks permit sensor conditioning and conversion alongside digital functions. The 32KB flash capacity provides space for calibration data, operating modes, and firmware, although memory requirements should be checked against the final application. Battery-powered designs also need careful review of sleep behavior, active current, analog accuracy, and thermal drift before selecting the exact ordering code.
推薦
LED Lighting Controller
The CY8C3665PVI-049 can implement a compact LED-lighting controller because its programmable digital blocks are suited to timing, pulse-width control, and sequencing, while its mixed-signal architecture can support current or temperature sensing. The 8-bit core can coordinate dimming commands, fault handling, and communication updates, and the 48-BSSOP package helps limit board area. LED drivers normally require external power transistors, current-sense components, and protection circuitry. Confirm whether the integrated ADC and operating limits satisfy the sensing scheme, and validate the thermal design at the highest intended LED drive current.
推薦
Programmable Control Panel
The CY8C3665PVI-049 is well suited to a compact programmable control panel because its 67MHz 8-bit core can handle button scanning, display updates, menu logic, and communication while programmable analog and digital blocks support mixed I/O requirements. The 32KB flash stores application firmware and configuration, and the 48-BSSOP package provides a compact footprint for embedded user interfaces. An I/O expander can add display or button pins when required. Review pin multiplexing, boot behavior, programming access, and the exact temperature grade because panel environments vary considerably in heat exposure.
推薦
推薦產品摘要
工程參考資料,適用於 CY8C3665PVI-049 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CY8C3665PVI-008 | CY8C3665PVA-049 |
|---|---|---|---|
| Package | 48-BSSOP | 48-BSSOP - same package | 48-SSOP - same package |
| Brand | Infineon | Infineon | Infineon |
| Product Type | PSoC 3 programmable system-on-chip | PSoC 3 programmable system-on-chip | PSoC 3 programmable system-on-chip |
| CPU Core | 8-bit 8051 | 8051 | 8051 |
| Maximum CPU Frequency | 67 MHz | 67 MHz | 67 MHz |
| Flash Memory | 32KB (32K × 8 bits) | 32KB | 32KB (32K × 8 bits) |
| Ordering Suffix | -049 | -008 | -049 |
主要差異化特點
- Compact mixed-signal integration (對比CY8C3665PVA-049)
- Same-family ordering compatibility (對比CY8C3665PVI-008)
- Mixed-signal PSoC functionality (對比CY8C3665PVA-049)
設計說明
Use the manufacturer BSSOP land pattern and place the required supply capacitors directly beside the power and ground pins. Keep sensitive analog inputs away from high-current switching nodes and digital clock routes. Because the 48-BSSOP lead pitch is relatively fine, verify paste volume, stencil apertures, and the reflow profile during assembly qualification to reduce bridging risk.
Preserve clean access to the ISP-SWD programming signals and include test pads that can be reached by the production fixture. Avoid routing communications or high-speed external signals beneath the MCU unless the board stack-up and return path have been evaluated. Maintain a continuous ground reference for analog and digital sections and place decoupling capacitance where its connection impedance is minimized.
Do not treat the -008 and PVA ordering codes as automatic substitutions merely because they use the same package. Compare operating temperature, qualification, supply limits, pin multiplexing, and any orderable option. The CY8C3665PVI-049 and CY8C3665PVA-049 listings do not expose a complete comparison matrix, so release a substitution only after checking the manufacturer ordering information and completing the required design verification.
Follow the datasheet's power-supply sequencing and decoupling requirements exactly. Evaluate startup behavior if the PSoC controls loads or sensors through programmable pins. For battery-powered products, measure both active and sleep-mode current across voltage and temperature, because clock frequency and analog-block activity can materially affect the system energy budget even when the 8-bit core itself is efficient.
合規資訊
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are exposed in the product information used for this record.