Analog Devices

DG411CUE+ - Quad 45Ω SPST Analog Switch | Analog Devices

MPN: DG411CUE+ ✓ Aktif
45 Ω maximum Rds(on) 16-pin TSSOP (MO-153AB) Package
MOQ: 1 |

DG411CUE+ Ringkasan

The Analog Devices DG411CUE+ is an improved quad, SPST analog switch with four independently controlled 1:1 channels, a 45 Ω on-resistance rating, and a 16-pin TSSOP package. It supports bidirectional analog signal paths and is specified for 0°C to +70°C operation. The DG411 family is listed in production, making the DG411CUE+ suitable for precision signal routing, test equipment, and general-purpose analog control systems.

An analog switch is an electrically controlled semiconductor device that connects or disconnects signal paths with minimal disturbance to the signal being routed. The SPST designation identifies a single-pole, single-throw configuration, while the DG411CUE+ provides four such switch circuits in one package. In the signal-chain hierarchy, it belongs to the analog switch and multiplexer family within interface ICs, where it sits between sensors, amplifiers, data converters, and external instrumentation.

Key characteristics include a 45 Ω maximum on-resistance, 1:1 signal routing, four switch circuits, and bidirectional analog-channel operation. Analog Devices states that the redesigned DG411, DG412, and DG413 family provides improved matching between switches, with a maximum on-resistance matching figure of 3 Ω, and guaranteed on-resistance flatness across the signal range of no more than 4 Ω. These characteristics help reduce channel-to-channel variation and distortion when routing precision signals.

The DG411CUE+ uses CMOS-based switching elements controlled by digital logic inputs. Because its channels are bidirectional, the switched nodes can carry signals in either direction, subject to the voltage and current limits defined by the manufacturer datasheet. Its 16-pin TSSOP surface-mount package supports compact PCB layouts while providing separate control and signal connections for four analog switches.

Typical uses include multimeter and oscilloscope input routing, automated test equipment, sample-and-hold systems, industrial measurement interfaces, and audio or communication signal-path switching. In these applications, the four independent channels can reduce the number of discrete relays or mechanical switch elements needed when a design requires several signal connections to be rerouted under digital control.

PCB design should keep the analog signal pins and associated traces away from high-current switching nodes and clocked digital circuitry. Follow the Analog Devices DG411 datasheet pin description and typical application circuits for the exact control logic, supply requirements, input voltage limits, and recommended external components. Confirm signal amplitude and switching speed against the device limits before finalizing the routing design.

This product page combines the manufacturer’s DG411 family information with package, ordering, regulatory, and cross-reference details. It also organizes practical selection guidance, comparison parameters, and PCB-focused design notes to help engineers evaluate the DG411CUE+ for new analog-routing designs.

Pilihan pengganti yang segera untuk DG411CUE+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

DG411CUE

✅ Masuk Drop-In
📦 16-pin TSSOP
Same 4-channel SPST function, 45 Ω on-resistance class, 16-pin TSSOP footprint, and 0°C to +70°C class; ordering notation differs by the trailing plus sign.

📋 Alternatif rujukan (tidak dalam katalog)

DG411CUE+T

✅ Masuk Drop-In
📦 16-pin TSSOP
Same 4-channel SPST function, 45 Ω on-resistance class, 16-pin TSSOP footprint, and 0°C to +70°C class; trailing T changes the ordering or delivery notation without changing the published principal parameters.

📋 Alternatif rujukan (tidak dalam katalog)

DG411CUE-T

✅ Masuk Drop-In
📦 16-pin TSSOP
Same 4-channel SPST function, 45 Ω on-resistance class, and 16-pin TSSOP footprint; the trailing T ordering notation differs while the documented principal characteristics remain consistent.

📋 Alternatif rujukan (tidak dalam katalog)

DG411CUE+ Penilaian maksimum & Ciri-ciri Elektrik

Switch Type SPST (single-pole, single-throw)
Number of Circuits 4 circuits
Number of Channels 4 channels
On Resistance 45 Ω maximum
Signal Configuration 1:1
Signal Direction Bidirectional
On-Resistance Matching 3 Ω maximum between switches
On-Resistance Flatness 4 Ω maximum over the signal range
Gambaran Suhu Operasi 0°C to +70°C
Package Type 16-pin TSSOP (MO-153AB)
Package Body Width 4.4 mm
Package Shape Rectangular
Gaya Pemasangan Surface mount
Number of Terminals 16 terminals
Status Lingkungan Hidup Production
Status RoHS Compliant

Panduan Konfigurasi Pin DG411CUE+ rectangular

Konfigurasi pin untuk DG411CUE+ (rectangular pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai rectangular untuk DG411CUE+

Tiada data garisan pin yang diperoleh untuk DG411CUE+.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

DG411CUE+ patut untuk 6 aplikasis: Multimeter Signal Routing, Automated Test Equipment, Oscilloscope Input Switching, Sample-and-Hold Systems, Industrial Sensor Interfaces, Audio Signal Path Switching.

🔧

Multimeter Signal Routing

The DG411CUE+ is suitable for routing measurement signals between input terminals and internal circuitry because it provides four independent SPST paths with bidirectional operation. Its 45 Ω maximum on-resistance and 3 Ω maximum switch-to-switch matching can help limit insertion-loss variation between selected channels, while the 1:1 configuration preserves the signal path topology. A common arrangement uses control logic to connect a source, return, and guard path in sequence. Before implementation, verify the permitted signal and logic voltages, switching speed, leakage, and off-isolation in the Analog Devices DG411 data sheet.

🏭

Automated Test Equipment

In automated test equipment, the DG411CUE+ can connect test stimuli and return signals under instrument-control logic without using multiple bulky mechanical relays. Four separately controlled SPST switches support repeatable routing of input, output, and guard lines, and the 45 Ω maximum on-resistance provides a defined basis for insertion-loss analysis. Bidirectional channels are useful when a test node can either drive or receive a signal. Keep copper traces short, provide a stable return path, and confirm timing against the control system because the switch transition characteristics must satisfy the measurement settling window.

📺

Oscilloscope Input Switching

The DG411CUE+ can route selected oscilloscope channels between test points, buffers, and calibration networks. Its four SPST switches, bidirectional paths, and 45 Ω maximum on-resistance allow several measurement connections to be managed by digital control in a compact 16-pin TSSOP package. Improved matching of 3 Ω maximum between switches helps reduce channel-dependent attenuation, which is valuable when comparing similar waveforms. Account for capacitance, leakage, and switching time when budgeting measurement bandwidth, and keep sensitive input traces away from adjacent switching and control nets.

🧩

Sample-and-Hold Systems

A sample-and-hold design can use the DG411CUE+ to connect and isolate a sensor or source node during acquisition and processing intervals. The SPST topology provides straightforward signal isolation, while bidirectional operation supports configurations where the held node is charged from one path and read through another. The 45 Ω maximum on-resistance must be included in the source impedance and settling calculations because it forms part of the charging path. Use the manufacturer’s switch timing, leakage, capacitance, and maximum signal ratings to determine the required acquisition time and external compensation components.

🏭

Industrial Sensor Interfaces

The DG411CUE+ can route sensor signals between conditioning channels, calibration references, and diagnostic paths in an industrial interface. Four independently controlled SPST circuits give the controller a compact way to select multiple analog inputs without requiring one relay per channel, and the 0°C to +70°C rating covers many ambient-controlled equipment installations. Bidirectional switching is beneficial for two-wire sensors and shared buses. The design must protect all switched nodes from exceeding the manufacturer’s absolute maximum ratings and should isolate high-energy industrial wiring from sensitive analog traces.

🎧

Audio Signal Path Switching

The DG411CUE+ can select among audio or low-frequency signal sources in compact test and control equipment. Its bidirectional SPST channels support source-to-destination routing, while the 45 Ω maximum on-resistance must be considered alongside the source and load impedance to establish expected insertion loss. The family’s 3 Ω maximum matching and 4 Ω maximum flatness specifications help reduce channel-dependent level differences. Place the device away from motor, relay, and switching-power stages, maintain a quiet ground reference, and verify distortion, bandwidth, and signal limits against the Analog Devices data sheet.

What is the DG411CUE+ and what does it do?
The DG411CUE+ is an improved quad SPST analog switch with four independently controlled, bidirectional 1:1 channels in a 16-pin TSSOP package. According to the Analog Devices DG411 datasheet and product page, its nominal maximum on-resistance is 45 Ω, and the redesigned DG411 family provides switch-to-switch on-resistance matching of 3 Ω maximum. It is used to route analog signals under digital control in measurement, test, and signal-processing systems.
What is the on-resistance of the DG411CUE+?
The DG411CUE+ has a maximum on-resistance of 45 Ω. Analog Devices also specifies improved matching of 3 Ω maximum between switches and on-resistance flatness of no more than 4 Ω over the signal range for the redesigned DG411 family. These figures are important when routing precision signals because resistance variation can alter signal amplitude and contribute to channel-dependent distortion. Consult the manufacturer datasheet for the exact test conditions associated with each limit.
Where can I download the DG411CUE+ datasheet PDF?
The official DG411CUE+ datasheet can be accessed through the Analog Devices DG411 product page at https://www.analog.com/en/products/dg411.html. The manufacturer page links the DG411 family data sheet, product selection table, and supporting documentation. The DG411CUE+ ordering code identifies the 16-pin TSSOP commercial-temperature configuration, so engineers should verify the package and temperature details against the pin description and ordering information before releasing a PCB design.
Where can I find the DG411CUE+ pinout?
The DG411CUE+ pinout is shown in the manufacturer’s DG411 data sheet, accessible from the Analog Devices product page at https://www.analog.com/en/products/dg411.html. The device uses a 16-pin TSSOP package and contains four SPST switch circuits with bidirectional analog paths. Use the pin-description table and package drawing in the data sheet when assigning control inputs and routing switched nodes; do not infer control polarity from an equivalent device.
Is DG411CUE+ suitable for bidirectional analog signals?
Yes, the DG411CUE+ supports bidirectional analog channels and is intended for SPST signal routing. According to the manufacturer product information, the four channels use a 1:1 configuration, while the family is specified with a 45 Ω maximum on-resistance. Bidirectional operation is useful for measurement paths where the same node may source or receive a signal, but the analog voltage, current, and power-supply limits must remain within the limits published in the DG411 data sheet.
What is the operating temperature range of DG411CUE+?
The DG411CUE+ is specified for operation from 0°C to +70°C. The manufacturer identifies the DG411 family as production, while the distributor listing confirms the commercial-temperature ordering configuration and 16-pin TSSOP package. This range suits room-temperature laboratory, industrial enclosure, and general equipment designs. If the surrounding system can exceed +70°C, select a part with an explicitly published extended-temperature rating and verify that its pinout and electrical limits remain equivalent.
DG411CUE+ vs DG411CUE: which part should I select?
DG411CUE+ and DG411CUE are identified as completely replaceable in the manufacturer-family comparison information, with consistent terminals, package, and main performance characteristics. The listing associates both with a 16-pin TSSOP package and a 1:1 bidirectional SPST configuration. When exact procurement packaging or ordering notation matters, confirm the current manufacturer ordering table and requested delivery form before treating the parts as identical.
Can DG411CUE+T replace DG411CUE+ without a PCB change?
Yes, the DG411CUE+T is listed as a complete replacement for the DG411CUE+ because the terminals, package, and principal functional characteristics are consistent. Both use a 16-pin TSSOP package and implement four bidirectional 1:1 SPST channels. The practical difference is the ordering and delivery notation, so engineers should confirm the required reel or tube format, packing quantity, and marking with the supplier before procurement.
What is the best drop-in replacement for DG411CUE+?
The closest documented drop-in choices are DG411CUE, DG411CUE+T, and DG411CUE-T, all from the same DG411 ordering family. The cross-reference information identifies these configurations as package- and terminal-compatible replacements for DG411CUE+. Because DG411CUE+T and DG411CUE-T differ in ordering, temperature, or delivery notation, verify the specific configuration requirements in the manufacturer ordering table rather than relying only on the package name.
When should I choose DG411CUE+ over another quad SPST switch?
Choose the DG411CUE+ when a design needs four independently controlled SPST paths, bidirectional analog routing, and a 45 Ω maximum on-resistance in a compact 16-pin TSSOP package. Its matching and flatness improvements are particularly relevant when channel-to-channel consistency matters. Select an alternative instead when it offers a needed extended-temperature rating, lower resistance, lower leakage, faster switching, or a different package that already matches the board architecture.
Where can I buy DG411CUE+ online?
Use the Request a Quote form on this page to request DG411CUE+ availability, lead time, and commercial terms from XAIPART. The part is identified by the manufacturer as a production device and is also offered in a 16-pin TSSOP commercial-temperature configuration. Quote requests allow the exact ordering code, delivery format, and required quantity to be checked together before an order is placed.
What is the price of DG411CUE+?
Submit a Request a Quote through the form on this page for the current DG411CUE+ price and quantity schedule. Commercial pricing can vary with the required quantity, delivery format, and supply condition, so a live quotation is more reliable than a static figure. The DG411CUE+ is a catalog part with a manufacturer datasheet and a documented 16-pin TSSOP ordering configuration.
What is the lead time for DG411CUE+?
Request the current lead time through the Request a Quote form on this page. Lead time can depend on the selected delivery format and order quantity, so it should be confirmed for the exact DG411CUE+ ordering configuration rather than inferred from generic marketplace stock messages. The manufacturer lists the DG411 family in production, and the available product information identifies the part as a 16-pin TSSOP catalog component.
Is DG411CUE+ in stock?
Current stock for the exact DG411CUE+ should be confirmed through the Request a Quote form on this page. Manufacturer production status does not by itself guarantee immediate availability, particularly when a particular tube, reel, or quantity is required. Include the desired quantity and delivery format in the request so the quote response can reflect the part most appropriate for the assembly schedule.
What are the key specifications of DG411CUE+ that engineers should know?
The essential DG411CUE+ specifications are four SPST channels, 45 Ω maximum on-resistance, bidirectional 1:1 operation, a 16-pin TSSOP package, and a 0°C to +70°C operating range. Analog Devices specifies improved on-resistance matching of 3 Ω maximum and flatness of 4 Ω maximum for the redesigned DG411 family. Verify supply voltage, absolute maximum ratings, leakage, switching time, and channel capacitance in the manufacturer data sheet.

Data referensi kejuruteraan untuk DG411CUE+ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the DG411CUE+ when the design requires four independently controlled SPST channels, bidirectional analog routing, and a 45 Ω maximum on-resistance in a 16-pin TSSOP package. Its documented 3 Ω maximum matching and 4 Ω maximum flatness are useful in measurement systems where channel-to-channel variation affects comparisons. Select DG411CUE when the ordering convention omits the trailing plus sign, or DG411CUE+T when the required procurement format uses that designation, after confirming the current ordering table. Evaluate DG411CUE-T only after checking its specific temperature and delivery requirements. If the board instead requires lower on-resistance, lower leakage, faster switching, a different number of channels, or a different package, do not assume that another switch is drop-in compatible. For those requirements, identify a candidate with an independently published footprint and complete electrical specification, then repeat the signal-integrity and absolute-maximum checks.

Perbandingan dengan Gantian

Parametr Produk Ini DG411CUE DG411CUE+T DG411CUE-T
Package 16-pin TSSOP (MO-153AB) 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Switch Type SPST SPST SPST SPST
Number of Circuits 4 circuits 4 circuits 4 circuits 4 circuits
Signal Configuration 1:1 1:1 1:1 1:1
On Resistance 45 Ω maximum 45 Ω maximum 45 Ω maximum 45 Ω maximum
Signal Direction Bidirectional Bidirectional Bidirectional Bidirectional
On-Resistance Matching 3 Ω maximum between switches 3 Ω maximum between switches 3 Ω maximum between switches 3 Ω maximum between switches
On-Resistance Flatness 4 Ω maximum over the signal range 4 Ω maximum over the signal range 4 Ω maximum over the signal range 4 Ω maximum over the signal range

Penyeberangsung Jelas

  • Four-channel integration in a single TSSOP package (vsDG411CUE)
  • Consistent bidirectional 1:1 signal routing (vsDG411CUE+T)
  • Improved channel matching and flatness (vsDG411CUE-T)

Catatan Desain

Treat the 45 Ω maximum on-resistance as part of the complete switched signal path. Calculate the resulting divider with the source impedance, load impedance, switch capacitance, and any input bias current rather than checking the switch in isolation. For measurement and audio paths, preserve a continuous ground reference and compare the 3 Ω maximum switch-to-switch matching when defining acceptable channel-to-channel level variation.

Place the DG411CUE+ close to the signals it routes and connect the package ground reference directly to the relevant analog ground plane. Keep switched-node traces away from clocks, relay drivers, inductors, and high-current power paths. Use the pin-description and package drawing in the Analog Devices DG411 data sheet when assigning the 16 terminals; do not derive control polarity from a similarly named switch.

Do not exceed the published limits for supply voltage, analog signal voltage, switch current, or absolute maximum conditions. Because the DG411CUE+ is bidirectional, both directions of a switched node must remain inside the operating envelope. Also account for off-isolation and leakage when a disconnected source can remain energized, and verify the settling interval required by precision acquisition or measurement systems.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The product comparison information identifies the DG411CUE+ as RoHS compliant. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statements are stated for this exact ordering configuration.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

DG411CUE+ datasheet DG411CUE+ datasheet pdf DG411CUE+ pinout DG411CUE+ specifications DG411CUE+ price DG411CUE+ stock DG411CUE+ equivalent DG411CUE+ replacement DG411CUE+ vs DG411CUE Analog Devices DG411CUE+ DG411CUE+ 45 ohm DG411CUE+ TSSOP-16 DG411CUE+ analog switch DG411CUE+ bidirectional SPST DG411CUE+ cross reference

Komponen dan Tanda berkaitan

Analog Devices DG411CUE+ DG411CUE DG411CUE+T DG411CUE-T Maxim Integrated analog switch SPST switch quad analog switch bidirectional analog channel interface IC semiconductor CMOS switch on resistance on-resistance matching on-resistance flatness signal routing 16-pin TSSOP TSSOP package family surface-mount package RoHS test and measurement industrial instrumentation sample-and-hold 1:1 signal configuration
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ