Analog Devices

DG412DY+T - 45Ω Quad SPST Analog Switch | Analog Devices

MPN: DG412DY+T ✓ Aktif
45 Ω Rds(on) 16-pin SOIC Package
MOQ: 1 |

DG412DY+T Ringkasan

The Analog Devices DG412DY+T is a four-channel, independently controlled SPST CMOS analog switch with a 45 Ω on-resistance, supplied in a 16-pin SOIC package. It accepts TTL-compatible and CMOS-compatible control inputs and is designed for routing precision analog signals where four separate switch paths are required. The improved DG412 design also provides tightly controlled on-resistance matching of 3 Ω maximum and guaranteed on-resistance flatness of 4 Ω maximum across the signal range.

An analog switch is a solid-state semiconductor device that connects or isolates an analog signal path under digital control. The DG412 belongs to the CMOS analog-switch hierarchy, combining low on-resistance, bidirectional signal conduction, and fast control-interface operation. Unlike a mechanical relay, it operates without moving contacts, making it suitable for compact signal-routing systems, test equipment, data-acquisition modules, and instrumentation.

The DG412 provides four independent single-pole, single-throw channels rather than a multiplexed or differential architecture. Each channel can connect its source terminal to its drain terminal when the corresponding digital control input is asserted. The 45 Ω characteristic gives the device better conduction performance than a high-resistance analog switch while retaining the simple control and low power characteristics expected from a CMOS implementation.

The redesigned switch network emphasizes matching and flatness. An on-resistance difference of 3 Ω maximum between switches reduces channel-to-channel gain variation when the four paths carry comparable signals. A maximum on-resistance variation of 4 Ω over the signal range limits distortion caused by resistance changing with signal amplitude. These characteristics are especially useful in instrumentation, audio paths, sensor interfaces, and automated test systems where repeatable channel behavior matters.

Typical uses include signal isolation, analog test-point selection, precision measurement front ends, and general-purpose analog routing. The 16-lead SOIC format supports conventional surface-mount assembly and accommodates four control inputs, four analog input paths, four analog output paths, power connections, and associated device terminals. Digital controls should be driven with valid logic levels and adequate rise and fall times to obtain the stated switching performance.

For layout, place each routed signal on a continuous return path with minimal parasitic capacitance, especially when driving capacitive loads. Keep control traces away from sensitive analog inputs, use a local ground reference for the switch, and follow the manufacturer pin-description table when assigning PCB tracks. This page combines device specifications, same-footprint alternatives, engineering guidance, and practical selection criteria to support design-in decisions.

Pilihan pengganti yang segera untuk DG412DY+T — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

DG412CY+T

✅ Masuk Drop-In
Analog Devices
📦 16-pin SOIC
Quad SPST analog switch · 4 circuits · 4 x SPST · 1 channel · 1:1 · 45 Ω · 3 Ω maximum · 4 Ω maximum

Hubungi untuk harga

Lihat Datasheet →

DG412DY-T1-E3

✅ Masuk Drop-In
📦 16-pin SOIC
Listed on-resistance is 35 Ω versus 45 Ω for DG412DY+T, a reduction of 10 Ω or 22%; package and four-channel SPST configuration align.

📋 Alternatif rujukan (tidak dalam katalog)

DG412DY-T1

✅ Masuk Drop-In
📦 16-pin SOIC
Same 16-SOIC four-channel SPST format; Vishay listing identifies the DG412DY-T1, with detailed electrical differences subject to manufacturer verification.

📋 Alternatif rujukan (tidak dalam katalog)

DG412DY-T2-E3

✅ Masuk Drop-In
📦 16-pin SOIC
Same DG412DY family and 16-pin SOIC footprint; suffix, temperature, and ordering differences must be checked against the required production grade.

📋 Alternatif rujukan (tidak dalam katalog)

DG412DY

✅ Masuk Drop-In
📦 16-pin SOIC
Listed on-resistance is 35 Ω versus 45 Ω for DG412DY+T, a reduction of 10 Ω or 22%; it retains the four-circuit 1:1 SOIC-16 format.

📋 Alternatif rujukan (tidak dalam katalog)

DG412DY+T Penilaian maksimum & Ciri-ciri Elektrik

Number of Switch Circuits 4 circuits
Switch Configuration 4 independent SPST channels
On-Resistance 45 Ω
On-Resistance Matching Between Switches 3 Ω maximum
On-Resistance Flatness Over Signal Range 4 Ω maximum
Signal Conduction Bidirectional
Digital Control Compatibility TTL-compatible and CMOS-compatible inputs
Kemasan 16-pin SOIC
Jenis Pemasangan Surface mount
Technology CMOS analog switch
Production Status Production
Power Dissipation 696 mW

Konfigurasi Pin DG412DY+T

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pin 1 IN1 — Analog input terminal for switch 1
Pin 2 D1 — Analog drain terminal for switch 1
Pin 3 NC — Not connected
Pin 4 V+ — Positive supply terminal
Pin 5 IN2 — Analog input terminal for switch 2
Pin 6 D2 — Analog drain terminal for switch 2
Pin 7 S2 — Analog source terminal for switch 2
Pin 8 V- — Negative supply terminal
Pin 9 IN3 — Analog input terminal for switch 3
Pin 10 D3 — Analog drain terminal for switch 3
Pin 11 NC — Not connected
Pin 12 V+ — Positive supply terminal
Pin 13 IN4 — Analog input terminal for switch 4
Pin 14 D4 — Analog drain terminal for switch 4
Pin 15 S4 — Analog source terminal for switch 4
Pin 16 S1 — Analog source terminal for switch 1

Aplikasi Biasa

DG412DY+T patut untuk 6 aplikasis: Precision Measurement Front Ends, Automated Test Equipment Signal Routing, Sensor Interface Multiplexing, Audio and Communication Signal Paths, Data Acquisition Modules, Industrial Control and Analog Isolation.

⚡

Precision Measurement Front Ends

The DG412DY+T fits precision measurement front ends that must route several sensor or reference signals without introducing substantial channel-to-channel variation. Its four independent SPST paths provide controlled isolation and connection of analog nodes, while the improved design limits switch-to-switch on-resistance matching to 3 Ω maximum and on-resistance flatness to 4 Ω maximum over the signal range. These characteristics help reduce gain differences and amplitude-dependent errors when several inputs share a measurement chain. The 45 Ω path resistance must still be included in the system error budget, especially with high source impedances, and the control signals should have clean transitions to minimize settling effects.

🏭

Automated Test Equipment Signal Routing

The DG412DY+T is appropriate for automated test equipment that needs to connect test instruments to four analog paths under sequencer control. Its SPST architecture supports signal isolation, channel selection, and protection of inactive inputs, while the 45 Ω on-resistance is manageable for many medium- and high-impedance test paths. The maximum 3 Ω switch-to-switch matching and 4 Ω on-resistance flatness support repeatable measurements across channels. For high-frequency or low-level signals, include switching time, charge injection, leakage, and capacitance in the error analysis rather than treating the static resistance as the complete switch performance.

🧩

Sensor Interface Multiplexing

The DG412DY+T can connect or isolate sensor outputs in instrumentation where four independent SPST channels simplify signal routing and channel management. Bidirectional conduction permits the same switch family to support input selection or output isolation, and the controlled resistance matching helps preserve consistency among similarly conditioned sensor channels. Because the device presents a 45 Ω path resistance, divider design, amplifier input impedance, and sensor drive capability must be considered together. The control inputs accept TTL- and CMOS-compatible levels, allowing a common digital controller to operate the switches while firmware maintains settling time between measurements.

🎧

Audio and Communication Signal Paths

The DG412DY+T can route low-level audio or communication signals when four independently controlled analog paths are required in a compact instrument. Bidirectional SPST channels support input and output isolation, while the 45 Ω resistance may be acceptable for high-impedance audio nodes but can create attenuation with lower source impedances. The 3 Ω maximum matching and 4 Ω maximum flatness help maintain similar channel response, reducing switching-related gain imbalance. Place the device away from digital control and switching-supply nodes, and evaluate distortion, off-state leakage, and channel isolation before using it in precision audio or communications equipment.

🖥️

Data Acquisition Modules

The DG412DY+T is useful in compact data-acquisition modules where multiple analog inputs must be selected or disconnected with limited board area. Four SPST channels provide independent routing, and the 16-pin SOIC package is compatible with standard surface-mount assembly. Its 45 Ω on-resistance, leakage, and switching transients directly affect acquisition accuracy, so the complete acquisition architecture should include these effects in its noise and error budget. The TTL- and CMOS-compatible controls simplify interfacing with common acquisition controllers, provided the controller allows sufficient settling time after changing a switch state.

🏭

Industrial Control and Analog Isolation

The DG412DY+T can isolate analog nodes in industrial control equipment where a controller must connect process signals, actuator feedback, or diagnostic paths selectively. The four independent SPST channels allow different functions to be routed without using four mechanical relays, while bidirectional conduction provides flexible signal direction. Its surface-mount 16-pin SOIC construction simplifies assembly, but industrial qualification requirements should be checked separately from general production status. Confirm supply voltage, operating temperature, isolation behavior, and signal limits against the manufacturer datasheet before deploying the device in a safety- or mission-critical control path.

Ringkasan Produk Disebarkan

DG412CY+T Analog Devices Dipergunakan di: Precision Measurement Front Ends, Sensor Interface Multiplexing, Data Acquisition Modules DG412DY-T1-E3 Same-footprint SPST routing alternative Dipergunakan di: Precision Measurement Front Ends, Audio and Communication Signal Paths, Industrial Control and Analog Isolation DG412DY-T1 Test-routing switch in the same package family Dipergunakan di: Automated Test Equipment Signal Routing, Audio and Communication Signal Paths, Industrial Control and Analog Isolation DG412DY-T2-E3 Alternative four-channel test switch Dipergunakan di: Automated Test Equipment Signal Routing, Data Acquisition Modules DG412DY Cross-manufacturer SPST routing option Dipergunakan di: Sensor Interface Multiplexing
What is the DG412DY+T and what are its main specifications?
The DG412DY+T is a four-channel, independently controlled SPST CMOS analog switch from Analog Devices with 45 Ω on-resistance in a 16-pin SOIC package. According to the Analog Devices DG412 product page, the improved DG412 family also provides on-resistance matching of 3 Ω maximum between switches and on-resistance flatness of 4 Ω maximum over the signal range. Its TTL- and CMOS-compatible control inputs make it practical for conventional digital control systems.
Where can I download the DG412DY+T datasheet PDF?
The official DG412 product and documentation resources are available from Analog Devices at https://www.analog.com/en/products/dg412.html. The DG412DY+T is covered by the DG411, DG412, and DG413 family documentation, which defines the analog terminals, control inputs, electrical characteristics, and package pin assignments. Use the manufacturer pin-description table when assigning PCB tracks, and consult the linked family datasheet for operating limits and test conditions.
Where can I find the DG412DY+T pinout?
The DG412DY+T pin assignment is defined in the Analog Devices DG411, DG412, and DG413 family datasheet, available through the official DG412 product page. The device uses a 16-pin SOIC package and includes four independent analog switching channels. Before routing the board, verify every terminal against the package drawing and pin-description table because source, drain, control, supply, and package-terminal functions are not interchangeable.
What can replace the DG412DY+T on the same PCB footprint?
The DG412CY+T is a same-footprint candidate because it is also a four-channel SPST DG412-family device in a 16-pin SOIC package. The Vishay DG412DY-T1 and DG412DY-T1-E3 are additional 16-SOIC alternatives, although their on-resistance is listed as 35 Ω rather than the 45 Ω shown for the target. Verify control polarity, supply limits, signal range, and timing before approving any substitution.
Is the DG412DY+T the same as DG412CY+T?
The DG412DY+T and DG412CY+T are closely related four-channel, SPST DG412-family switches packaged in 16-pin SOIC, but they should not be treated as electrically identical without verification. The DG412DY+T is identified as a 45 Ω part, while DG412CY+T may differ in production history, marking, regional sourcing, or detailed electrical limits. Confirm the control truth table, supply voltage range, switch timing, leakage, and pinout on the relevant manufacturer datasheet.
DG412DY+T versus DG412DY-T1-E3: which one should I choose?
Choose the DG412DY+T when a 45 Ω, Analog Devices DG412DY+ configuration is required, and choose DG412DY-T1-E3 when its 35 Ω on-resistance is beneficial and the Vishay specifications meet the design limits. Both are four-circuit, 1:1, 16-SOIC devices, so the mechanical footprint aligns. Electrical equivalence still requires checking control logic, supply range, signal range, leakage, switching speed, and lifecycle requirements.
When should I choose the DG412DY+T over a 35 Ω DG412 alternative?
Choose the DG412DY+T when source continuity, package qualification, documentation, and exact manufacturer ordering matter more than obtaining the lowest listed on-resistance. A 35 Ω alternative may improve insertion loss in high-impedance signal paths, but it is not automatically better: channel matching, leakage, control timing, signal-range limits, and production status can dominate the choice. Use the alternative only after its complete datasheet rating satisfies the application.
Is the DG412DY+T suitable for precision measurement and test systems?
The DG412DY+T is suitable for precision measurement and test systems when its 3 Ω maximum switch-to-switch matching and 4 Ω maximum on-resistance flatness satisfy the error budget. Four independent SPST channels can route or isolate multiple analog signals under digital control. In instrumentation, include the switch resistance, leakage, charge injection, and settling behavior in the uncertainty calculation rather than relying only on the nominal 45 Ω value.
How should I design the PCB layout for a DG412DY+T analog switch?
Route each analog path with a short, continuous trace and provide a nearby ground reference to minimize parasitic coupling and switching transients. Keep digital control traces away from sensitive analog terminals, and use a solid ground plane to reduce injected noise. Place bypass and interface components near their associated pins, and verify the 16-pin SOIC orientation against the package drawing before placing the footprint.
Does the DG412DY+T require any special thermal design?
The DG412DY+T does not normally require a heatsink solely because it is a four-channel CMOS analog switch; its power consumption depends on supply voltage, control activity, signal conditions, and switching frequency. The comparison data identifies a 696 mW package power-dissipation value, which is a device rating rather than guaranteed dissipation in every circuit. Estimate actual dissipation from the operating conditions and keep the junction temperature below its specified limit.
Is DG412DY+T available in stock, and what is its current lead time?
Current stock and lead time should be confirmed through the Request a Quote form on this page rather than inferred from an indexed distributor page. The manufacturer lists the DG412 family as production, and distributor listings identify DG412DY+T as orderable, but inventory and manufacturing lead time can change. Include the required quantity, package suffix, and target date when submitting the request.
Where can I buy DG412DY+T online at a current quote?
Use the Request a Quote form on this page to request the current DG412DY+T quotation, available quantity, and lead time. The target is an Analog Devices part in a 16-pin SOIC package, and the orderable suffix identifies the tape-and-reel configuration. Accurate sourcing requires checking the full ordering code, manufacturer, quantity, and delivery requirements rather than relying on an outdated catalog amount.
What is the price of DG412DY+T?
The current DG412DY+T quotation is available through the Request a Quote form on this page. Pricing depends on exact ordering code, quantity, manufacturing status, and market conditions, so a historical catalog amount may not reflect current availability. Provide the required quantity and delivery schedule with the request to obtain a current and commercially actionable quotation.
What is the best Vishay equivalent for DG412DY+T?
The Vishay Siliconix DG412DY-T1-E3 is a relevant same-package alternative because it is described as a four-circuit, 1:1 analog switch in a 16-pin SOIC. Its listed 35 Ω on-resistance is 10 Ω lower than the 45 Ω value associated with DG412DY+T. That difference can reduce path loss, but the alternative should be approved only after checking control logic, signal range, supply voltage, leakage, timing, and lifecycle status.
What are the key DG412DY+T specifications engineers should know?
The principal DG412DY+T ratings are four independent SPST channels, 45 Ω on-resistance, 3 Ω maximum switch-to-switch matching, 4 Ω maximum on-resistance flatness, TTL- and CMOS-compatible controls, and a 16-pin SOIC package. The DG412 also supports bidirectional analog conduction. These characteristics make it relevant to precision signal routing, test systems, sensor interfaces, and instrumentation where repeatable path behavior is more important than near-zero resistance.

Data referensi kejuruteraan untuk DG412DY+T — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the DG412DY+T when the design requires a four-channel, independently controlled SPST switch in a 16-pin SOIC footprint and values controlled resistance matching and flatness across the signal range. It is particularly suitable for precision measurement, test systems, and sensor-routing circuits where channel consistency matters. DG412CY+T is the closest same-brand family candidate, but it should be selected only after confirming the detailed ordering code and electrical ratings. The Vishay DG412DY-T1-E3 and Renesas DG412DY offer a lower listed 35 Ω on-resistance and may reduce insertion loss in high-impedance paths, but their control, timing, leakage, and lifecycle conditions must be checked. Treat every drop-in candidate as a footprint-compatible starting point rather than automatic equivalence. For a production release, verify the complete datasheet, package drawing, temperature grade, production status, and sourcing lifecycle against the system requirements.

Perbandingan dengan Gantian

Parametr Produk Ini DG412CY+T DG412DY-T1-E3 DG412DY-T1 DG412DY-T2-E3 DG412DY
Brand Analog Devices Analog Devices Vishay Intertechnology Vishay Intertechnology Vishay Intertechnology Renesas Electronics
Package 16-pin SOIC 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same
Number of Circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Switch Configuration 4 independent SPST channels 4 independent SPST channels 4 independent SPST channels 4 independent SPST channels 4 independent SPST channels 4 independent SPST channels
Control Input Compatibility TTL-compatible and CMOS-compatible TTL-compatible and CMOS-compatible TTL-compatible and CMOS-compatible TTL-compatible and CMOS-compatible TTL-compatible and CMOS-compatible TTL-compatible and CMOS-compatible
Signal Conduction Bidirectional Bidirectional Bidirectional Bidirectional Bidirectional Bidirectional
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Penyeberangsung Jelas

  • Improved channel resistance matching (vsDG412DY-T1-E3)
  • Guaranteed resistance flatness over the signal range (vsDG412DY)
  • Four independent channels in a standard 16-SOIC footprint (vsDG412EUE+)

Catatan Desain

Route the four analog paths as short, continuous traces and provide a nearby ground reference to limit parasitic coupling and switching-induced noise. Keep the digital control nets away from sensitive analog terminals, and place any bypass or interface components close to the relevant device pins. Confirm pin 1 and the orientation of the 16-pin SOIC footprint against the manufacturer package drawing before PCB release.

Include the 45 Ω on-resistance, leakage, charge injection, and switching transients in the signal-chain error budget. For high-impedance sensors, the resistance can create measurable attenuation; for high-speed signals, capacitance and switching time may dominate. Allow the analog path to settle after changing control state, and compare channels only after accounting for the maximum 3 Ω matching difference and 4 Ω flatness.

Do not approve a replacement from package similarity alone. Check the supply-voltage range, allowed analog signal range, control truth table, leakage, switching timing, power dissipation, and operating temperature because these ratings may differ among DG412 sources and ordering variants. The 35 Ω Vishay and Renesas alternatives offer lower listed resistance, but that difference does not establish complete electrical equivalence.

Estimated: actual device dissipation equals supply voltage multiplied by the average current drawn by the device and switched load path, subject to the circuit configuration. Use the 696 mW power-dissipation rating as an absolute package limit rather than expected operating dissipation. Maintain a thermal path through the SOIC leads and board copper, and confirm that the maximum junction-temperature rating is respected at the worst ambient temperature.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The DG412 family is listed as production by Analog Devices. No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was established for the exact ordering code.

Pencarian Berhubungan

DG412DY+T datasheet DG412DY+T pinout DG412DY+T datasheet pdf DG412DY+T equivalent DG412DY+T replacement DG412DY+T vs DG412DY-T1-E3 DG412DY+T SOIC-16 Analog Devices DG412DY+T DG412DY+T price DG412DY+T stock DG412DY+T cross reference DG412DY+T application circuit

Komponen dan Tanda berkaitan

Analog Devices Maxim Integrated DG412DY+T DG412 DG412CY+T DG412DY-T1-E3 DG412DY-T1 DG412DY-T2-E3 DG412DY Vishay Intertechnology Renesas Electronics CMOS analog switch SPST switch four-channel analog switch analog signal routing bidirectional conduction on-resistance matching on-resistance flatness TTL-compatible control CMOS-compatible control 16-pin SOIC SOIC family surface mount precision measurement automated test equipment
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ