Texas Instruments

DS90LT012AHMFX - 400 Mbps LVDS Receiver | Texas Instruments

MPN: DS90LT012AHMFX ✓ Aktif
350 mV Vdss SOT-23-5 Package 200 MHz Speed
MOQ: 1 |

DS90LT012AHMFX Ringkasan

Texas Instruments DS90LT012AHMFX is a single CMOS differential line receiver designed for ultra-low-power, low-noise, high-speed LVDS interfaces. It supports data rates in excess of 400 Mbps, equivalent to 200 MHz, accepts a typical 350 mV differential input, and translates the signal into 3 V CMOS levels. The device is housed in a 5-pin SOT-23 package.

An LVDS receiver is a high-speed interface device that converts a small-amplitude differential voltage into a conventional logic-level output. LVDS belongs to the differential line-driver and receiver family within interface ICs, where low voltage swing, common-mode rejection, and reduced crosstalk support reliable data transfer over longer printed-circuit-board traces than many single-ended interfaces. The DS90LT012AH also includes an input line-termination resistor for point-to-point applications.

The principal features of the DS90LT012AHMFX are its operation above 400 Mbps, typical differential input sensitivity of 350 mV, and 3 V CMOS output operation. Its low-noise receiver architecture is intended to preserve signal integrity in systems operating at high data rates. The integrated termination also simplifies point-to-point links by reducing the need for a separate input termination network.

The DS90LT012AHMFX is a single-receiver device rather than a quad-channel LVDS receiver. It is therefore suited to compact point-to-point links where channel count is secondary to package size, low power dissipation, and high signaling rate. The SOT-23-5 form factor supports dense PCB placement, although high-speed routing still requires controlled impedance and minimized trace-length mismatch.

Typical applications include high-speed point-to-point backplanes, industrial control links, video and display interfaces, communications equipment, test and measurement systems, and embedded data links. In each case, the receiver can convert a low-voltage differential LVDS signal into a 3 V CMOS signal for subsequent digital processing. The companion DS90LV011AH is identified in the manufacturer material as an LVDS line driver.

A critical implementation consideration is maintaining a continuous reference plane and tightly matched differential routing beneath the receiver. The input termination resistor is intended for point-to-point use, so designers should confirm whether the chosen link topology requires it. Input and output paths should also be kept short and separated from switching-current loops to preserve the receiver’s low-noise benefit.

This page combines the manufacturer’s operating characteristics, package information, verified component listings, cross-reference findings, and practical PCB guidance. It also identifies the limitation of the available substitute search: the directly related candidates share the receiver package and electrical family, but no independent set of five distinct cross-brand drop-in receivers could be confirmed without risking an incorrect replacement recommendation.

Pilihan pengganti yang segera untuk DS90LT012AHMFX — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

DS90LT012AHMF/NOPB

✅ Masuk Drop-In
📦 SOT-23-5
Uses the same SOT-23-5 package and receiver family, while the ordering suffix changes the configured product, finish, or environmental terms that must be verified before substitution.

📋 Alternatif rujukan (tidak dalam katalog)

DS90LT012AHMFX/NOPB

✅ Masuk Drop-In
📦 SOT-23-5
Uses the same SOT-23-5 receiver package, while the NOPB suffix denotes a different ordering or finish configuration whose qualification details require verification.

📋 Alternatif rujukan (tidak dalam katalog)

DS90LT012AHMFX Spesifikasi

Product Type Single CMOS differential LVDS line receiver
Maximum Data Rate Greater than 400 Mbps
Frekuensi Klock Maksimum 200 MHz
Typical Differential Input Voltage 350 mV
Output Voltage Level 3 V CMOS
Receiver Quantity 1 receiver
Input Termination Integrated input line-termination resistor
Kemasan SOT-23-5
Terminal Count 5 terminals
Jenis Pemasangan Surface mount
Manufacturer Product Page Texas Instruments DS90LT012AH product page

Panduan Konfigurasi Pin DS90LT012AHMFX sot-23-5

Konfigurasi pin untuk DS90LT012AHMFX (sot-23-5 pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai sot-23-5 untuk DS90LT012AHMFX

Tiada data garisan pin yang diperoleh untuk DS90LT012AHMFX.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

DS90LT012AHMFX patut untuk 6 aplikasis: Industrial High-Speed Control Links, Communications Equipment Interconnects, Video and Display Data Channels, Test and Measurement Signal Paths, Embedded Processor and FPGA Links, Low-Power Serial Backplanes.

🏭

Industrial High-Speed Control Links

The DS90LT012AHMFX fits isolated industrial cabinet-to-cabinet or board-to-board control links that require a low-amplitude differential receiver. Its operation above 400 Mbps, typical 350 mV input, and 3 V CMOS output provide ample signaling margin for a compact point-to-point LVDS channel. The integrated input termination can simplify receiver-side matching, while the SOT-23-5 package preserves board area. Use controlled-impedance routing, matched differential lengths, and a continuous ground reference to prevent the 200 MHz-class clock signal from accumulating noise or timing distortion.

🌐

Communications Equipment Interconnects

The DS90LT012AHMFX is suitable for compact high-speed links inside communications equipment where an LVDS transmitter is followed by a local receiver. Supporting data rates in excess of 400 Mbps allows the 200 MHz receiver to carry serial data, clock, or recovered signaling through a point-to-point PCB channel. Its low-noise CMOS output stage provides a direct interface to digital logic, while the integrated line termination reduces receiver-side network complexity. Route the pair over a continuous reference plane and keep connector or transceiver escape paths short to avoid impedance discontinuities.

📺

Video and Display Data Channels

The DS90LT012AHMFX can receive LVDS signaling used between video or display processing blocks when the link operates as a dedicated high-speed differential channel. Its typical 350 mV sensitivity and greater-than-400-Mbps capability suit the serial data rates commonly encountered in pixel-clock and video-data interfaces. The 3 V CMOS output can feed receiving logic, and the SOT-23-5 footprint supports placement near the source driver. The principal design constraint is signal integrity: maintain matched pair geometry, adequate return-path continuity, and separation from switching-power paths.

🖥️

Test and Measurement Signal Paths

The DS90LT012AHMFX is appropriate for receiving high-speed differential stimulus or clock signals in compact test and measurement instruments. Its low-noise receiver architecture is intended to preserve the integrity of signals passing above 400 Mbps, while the 3 V CMOS output can connect to counters, capture logic, or FPGA input stages. The integrated termination is useful for point-to-point fixture or board links, although cable and fixture transitions require careful impedance control. Keep the receiver away from fan drives, relays, and high-current switching nodes to minimize coupled noise.

🧩

Embedded Processor and FPGA Links

The DS90LT012AHMFX can serve as the receiver endpoint for a short high-speed link between an FPGA or embedded controller and another board. At data rates in excess of 400 Mbps, it converts a typical 350 mV LVDS differential signal into a 3 V CMOS output suitable for digital logic. Its small SOT-23-5 package allows placement close to the destination device, reducing trace exposure. Designers should verify the companion driver’s output compatibility, termination arrangement, clock topology, and I/O voltage rather than assuming every LVDS and CMOS interface can be connected directly.

⚡

Low-Power Serial Backplanes

The DS90LT012AHMFX is well suited to low-power serial backplanes where one point-to-point lane must carry data above 400 Mbps without the higher supply requirements of legacy ECL or PECL devices. The receiver’s low-power LVDS approach, typical 350 mV input, and integrated termination simplify board-level implementation. Each lane requires balanced routing and a suitable LVDS source, and the receiver output must match the destination device’s CMOS voltage. Validate timing budget, skew, connector transitions, and channel loss when the link extends beyond a PCB trace.

Ringkasan Produk Disebarkan

DS90LV011AH Companion LVDS line driver Dipergunakan di: Industrial High-Speed Control Links, Communications Equipment Interconnects, Video and Display Data Channels, Test and Measurement Signal Paths, Embedded Processor and FPGA Links, Low-Power Serial Backplanes DS90LT012AHMFX Texas Instruments Dipergunakan di: Industrial High-Speed Control Links, Test and Measurement Signal Paths DS90LT012AHMF/NOPB Related single LVDS receiver Dipergunakan di: Communications Equipment Interconnects, Low-Power Serial Backplanes DS90LV012ATMF Related TI high-speed differential interface device Dipergunakan di: Video and Display Data Channels, Embedded Processor and FPGA Links
What is the operating speed of DS90LT012AHMFX?
The DS90LT012AHMFX supports LVDS data rates in excess of 400 Mbps, corresponding to 200 MHz. According to the Texas Instruments DS90LT012AH datasheet, the device is a single CMOS differential receiver intended for high-rate point-to-point interfaces. Its SOT-23-5 package keeps the receiver compact while the integrated input termination supports directly terminated LVDS connections.
What input voltage does DS90LT012AHMFX accept?
The DS90LT012AHMFX accepts a typical low-amplitude differential input of 350 mV and converts it to a 3 V CMOS output. The Texas Instruments DS90LT012AH datasheet describes the input as a low-voltage differential signal. Designers should preserve balanced routing and the proper reference-plane return path so that common-mode noise and trace mismatch do not degrade the differential signal.
Does DS90LT012AHMFX include an LVDS input termination?
Yes, the DS90LT012AHMFX includes an input line-termination resistor for point-to-point applications. The Texas Instruments DS90LT012AH datasheet identifies this integrated termination as a core feature of the receiver. It can simplify the termination arrangement on a compact link, although the PCB designer should still verify that the board topology and impedance match are consistent with the intended LVDS interface.
What is DS90LT012AHMFX used for?
The DS90LT012AHMFX is used to receive high-speed LVDS differential signals and convert them into 3 V CMOS logic levels. The Texas Instruments product page identifies it for ultra-low power dissipation, low noise, and data rates above 400 Mbps. Typical uses include industrial links, communications equipment, test systems, video interfaces, and other compact point-to-point digital connections.
Is DS90LT012AHMFX suitable for high-speed point-to-point links?
Yes, the DS90LT012AHMFX is suitable for high-speed point-to-point links because it operates above 400 Mbps and includes an integrated input termination resistor. The Texas Instruments DS90LT012AH datasheet highlights its low-noise receiver and LVDS input architecture. PCB signal integrity remains essential, particularly impedance-controlled differential routing, matched trace lengths, and an uninterrupted ground reference plane.
Where can I download the DS90LT012AHMFX datasheet PDF?
The DS90LT012AHMFX datasheet PDF is available from the official Texas Instruments product page at https://www.ti.com/lit/ds/symlink/ds90lt012ah.pdf. The document provides the authoritative descriptions for the 400-Mbps-class LVDS receiver, typical 350-mV differential input, 3 V CMOS output, electrical characteristics, and package information. Use the pin-description table and application guidance in that document when assigning PCB nets.
Where can I find the DS90LT012AHMFX pinout?
The DS90LT012AHMFX pinout is defined in the pin-configuration section of the Texas Instruments DS90LT012AH datasheet. It is a five-terminal SOT-23 device, so the complete package has five positions: two differential input terminals, one CMOS output, power, and ground. Assign the physical connections according to the numbered diagram and pin table rather than relying only on a generic package outline.
What is the difference between DS90LT012AHMFX and DS90LT012AHMF/NOPB?
The DS90LT012AHMFX and DS90LT012AHMF/NOPB belong to the same DS90LT012AH family and use the same SOT-23-5 receiver package. Their ordering suffixes indicate product and environmental or finish configurations, so the exact approved electrical, temperature, and assembly conditions must be checked in the manufacturer ordering information. They can be treated as close package-compatible candidates only after those requirements and the PCB land pattern have been confirmed.
When should I choose DS90LT012AHMFX over another single LVDS receiver?
Choose the DS90LT012AHMFX when the design needs one high-speed LVDS receiver with operation above 400 Mbps, a 3 V CMOS output, and an integrated point-to-point termination in a compact SOT-23-5 package. If a design requires multiple channels, a different supply voltage, or a different input termination strategy, select a receiver with those specifications instead. The manufacturer datasheet remains the basis for final compatibility approval.
What can replace DS90LT012AHMFX without changing the PCB?
DS90LT012AHMF/NOPB is the closest confirmed package-compatible replacement candidate in the available cross-reference results, but it should not be substituted solely from the family name. Confirm the SOT-23-5 pin arrangement, supply voltage, temperature grade, termination configuration, lifecycle status, and assembly qualifications against the Texas Instruments DS90LT012AH documentation. The Request a Quote form on this page can help identify an approved configuration.
Is DS90LT012AHMFX the same as DS90LV012ATMF?
No, the DS90LT012AHMFX and DS90LV012ATMF are not established as equivalent drop-in parts. Although both are associated with TI’s DS90LV012A-family interface family and SOT-23-5 packages, the LV designation distinguishes a line-driver function from the LT receiver function. Their signal directions and pin functions differ, so they should not be treated as interchangeable without a complete pin and circuit review.
What are the key specifications of DS90LT012AHMFX that engineers should know?
The key DS90LT012AHMFX specifications are single-channel LVDS reception, operation above 400 Mbps, 200 MHz clock capability, a typical 350 mV differential input, 3 V CMOS output levels, an integrated input line-termination resistor, and a SOT-23-5 surface-mount package. The Texas Instruments product page and datasheet identify the device as a low-power, low-noise differential receiver for high-speed interface applications.
Where can I buy DS90LT012AHMFX online?
Use the Request a Quote form on this page to ask for DS90LT012AHMFX availability, order quantity, and a current quotation. The form is the appropriate route for confirming the exact MPN, packaging configuration, and lead time without relying on an unverified stock claim. Before ordering, confirm the SOT-23-5 package, operating requirements, and environmental grade against the Texas Instruments documentation.
What is the price of DS90LT012AHMFX?
The current commercial terms for DS90LT012AHMFX are available through the Request a Quote form on this page. Submit the required quantity and exact MPN to obtain a current quotation, including any package or production-volume considerations. The part number is DS90LT012AHMFX, and ordering should not rely on a generic DS90LT012AH listing without checking the suffix.
What is the lead time and stock status for DS90LT012AHMFX?
Current stock status and lead time for DS90LT012AHMFX should be confirmed through the Request a Quote form on this page. Include the required quantity, target date, and preferred packaging details in the request. This avoids presenting an unverified availability estimate and allows the order to be matched specifically to DS90LT012AHMFX rather than a related family member.

Data referensi kejuruteraan untuk DS90LT012AHMFX — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose DS90LT012AHMFX for a compact point-to-point LVDS link requiring one receiver, operation above 400 Mbps, a typical 350 mV differential input, and a 3 V CMOS output. Its integrated input termination is particularly convenient when the PCB topology is a direct source-to-receiver connection. Select a multi-channel receiver instead when several independent LVDS lanes must be accommodated. Do not use DS90LV012ATMF or DS90LV011AH as direct replacements; the former is associated with a line-driver function, while the latter is the companion transmitter. DS90LT012AHMF/NOPB and DS90LT012AHMFX/NOPB are the closest confirmed package-compatible candidates, but suffix-specific temperature, qualification, finish, and ordering requirements must be confirmed. Always verify the complete pin arrangement, supply requirements, termination, and timing budget in the manufacturer documentation.

Perbandingan dengan Gantian

Parametr Produk Ini DS90LT012AHMF/NOPB DS90LT012AHMFX/NOPB
Brand Texas Instruments Texas Instruments Texas Instruments
Package SOT-23-5 SOT-23-5 - same package SOT-23-5 - same package
Receiver Type Single CMOS differential LVDS receiver Single differential receiver Single differential receiver
Input Termination Integrated input line-termination resistor Integrated input line-termination resistor Integrated input line-termination resistor
Receiver Quantity 1 receiver 1 receiver 1 receiver
Mounting Type Surface mount Surface mount Surface mount

Penyeberangsung Jelas

  • Compact single-channel receiver (vsDS90LV012ATMF)
  • Integrated point-to-point termination (vsDS90LV011AH)
  • High-speed operation in a small package (vsDS90LT012AHMF/NOPB)

Catatan Desain

Route the LVDS input as a tightly matched differential pair over a continuous reference plane. Maintain the intended characteristic impedance through the receiver pins, avoid stubs, and minimize vias because a discontinuity can create reflections that become significant when the interface operates at 200 MHz. Keep the receiver close to the destination logic and provide an uninterrupted ground-return path beneath the pair.

The integrated input termination is intended for point-to-point applications. Confirm that the PCB channel, source-driver impedance, and receiver termination form the intended network rather than adding a second termination that would over-damp the signal. Review input common-mode limits, receiver threshold behavior, and trace-length tolerance using the Texas Instruments DS90LT012AH datasheet before fixing the topology.

Do not substitute DS90LV012ATMF or DS90LV011AH as receiver replacements merely because they use a related SOT-23-5 package. The DS90LV012A parts are associated with the line-driver side of the interface family, so their signal direction and pin functions differ from the DS90LT012AH receiver. Verify the numbered pin table, power rails, termination arrangement, and logic-level compatibility for every proposed replacement.

Keep the high-speed receiver path away from switching-power inductors, relay contacts, high-di/dt traces, and connector transitions where possible. Route slow control and logic signals on a separate layer where practical, and provide local bypassing at the device supply pins. Although the receiver is designed for low noise, external common-mode and conducted noise can still affect the small 350 mV-typical differential signal.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available component information identifies the exact MPN and package but does not provide extractable compliance statements. The NOPB ordering suffix should not be interpreted as proof of compliance without the corresponding manufacturer declaration.

Pencarian Berhubungan

DS90LT012AHMFX datasheet DS90LT012AHMFX pinout DS90LT012AHMFX datasheet pdf DS90LT012AHMFX equivalent DS90LT012AHMFX replacement DS90LT012AHMFX cross reference DS90LT012AHMFX vs DS90LV012ATMF DS90LT012AHMFX footprint DS90LT012AHMFX price DS90LT012AHMFX stock Texas Instruments DS90LT012AHMFX DS90LT012AHMFX 400 Mbps LVDS receiver DS90LT012AHMFX SOT-23-5 receiver DS90LT012AHMFX application circuit what can replace DS90LT012AHMFX

Komponen dan Tanda berkaitan

Texas Instruments DS90LT012AHMFX DS90LT012AH DS90LT012AHMF/NOPB DS90LT012AHMFX/NOPB DS90LV011AH DS90LV012ATMF LVDS receiver differential line receiver CMOS logic output interface IC semiconductor low-voltage differential signaling point-to-point termination 350 mV differential input 400 Mbps data rate 200 MHz clock 3 V CMOS SOT-23-5 SOT package family surface-mount technology signal integrity differential pair routing common-mode noise PCB impedance control
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ