DS90LV110ATMT - 1:10 200MHz LVDS Distributor | TI
MPN: DS90LV110ATMT ✓ AktifDS90LV110ATMT Ringkasan
An LVDS data or clock distributor is an interface IC that accepts a differential input and generates multiple differential outputs. In the signal-chain hierarchy, the DS90LV110ATMT belongs to the clock-buffer and driver class, then to interface ICs, and ultimately to broader data-conversion and communications signal conditioning. Its one-to-ten fanout allows one source to reach several destinations while reducing loading, skew, and signal degradation associated with repeated branching.
The device operates from a 3 V supply and supports signal operation from -40°C to +85°C. Its LVDS outputs can be placed in a high-impedance TRI-STATE state through the enable function. The failsafe feature provides defined behavior when the input is open, shorted, or otherwise left in an invalid state, helping downstream equipment reject corrupted data instead of propagating unpredictable logic levels.
The internal architecture keeps all data paths fully differential from the input through the outputs. This approach reduces common-mode noise and pulse-width distortion while supporting low-power, high-speed operation. At 1:10 fanout, the part is particularly useful when a central oscillator, serializer, transceiver, or controller must distribute a clock or data signal across multiple circuit blocks without introducing a separate output driver at every branch.
Typical uses include telecommunications backplanes, industrial data-acquisition systems, test equipment, parallel-to-serial and serial-to-parallel links, FPGA clock distribution, and multi-board clock synchronization. The TSSOP package also supports compact, surface-mounted PCB layouts, although high-speed differential routing and careful output-load matching remain essential.
When designing around the DS90LV110ATMT, use the manufacturer pin-description table to assign all 28 pins, route the differential input as a short balanced pair, and maintain a continuous ground reference beneath the pair. Confirm output loading, enable timing, and propagation-delay requirements for every destination because fanout and trace length can affect timing margins.
This page combines the manufacturer product information with practical application guidance, verified replacement candidates, package-aware comparisons, and design notes intended to make board-level evaluation more efficient than consulting the basic ordering description alone.
Pilihan pengganti yang segera untuk DS90LV110ATMT — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera DS90LV110ATMT (sama faktor bentuk dan kaki) — berbeza dalam Package, Product Type, Supply Voltage.
DS90LV110ATMTX/NOPB
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
DS90LV110TMTC
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →DS90LV110ATMT Spesifikasi
| Product Type | 1-to-10 LVDS data and clock distributor |
| Fanout Ratio | 1:10 |
| Maximum Clock or Data Frequency | 200 MHz |
| Propagation Delay | 145 ps |
| Output Current | 160 mA |
| Tegangan Pemberi Arus | 3 V |
| Gambaran Suhu Operasi | -40°C to +85°C |
| Signal Type | LVDS differential signaling |
| Data Path Architecture | Fully differential from input to outputs |
| Failsafe Function | Supported |
| Output Control | TRI-STATE enable function |
| Power Class | Low-power high-speed interface |
| Kemasan | 28-pin TSSOP (PW) |
| Package Width | 4.40 mm |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin DS90LV110ATMT 4.40 mm
Konfigurasi pin untuk DS90LV110ATMT (4.40 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk DS90LV110ATMT.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
DS90LV110ATMT patut untuk 6 aplikasis: Telecommunications Backplane Clock Distribution, FPGA Clock Fanout, Industrial Data Acquisition, Parallel-to-Serial Link Support, Test and Measurement Equipment, High-Speed Interface Fanout.
Telecommunications Backplane Clock Distribution
The DS90LV110ATMT fits backplane clock distribution because it accepts one differential source and provides ten LVDS outputs at up to 200 MHz. The fully differential paths reduce noise and pulse-width distortion while the 1:10 fanout avoids adding a separate buffer at every destination. Its failsafe function also helps receivers respond predictably when the source is disconnected. In a backplane, preserve controlled differential impedance, provide a continuous ground reference, and verify receiver input capacitance across all connected branches.
Disebarkan
FPGA Clock Fanout
The DS90LV110ATMT can distribute a common differential clock to multiple FPGA clock inputs where fanout and skew control are important. Its 1:10 ratio supports ten destinations, while the 200 MHz operating limit covers many mid-speed digital interfaces. TRI-STATE outputs allow unused destinations to be disabled. The 28-pin TSSOP package keeps the placement compact, but designers should still use matched routing, avoid stubs, confirm clock-input thresholds, and check the FPGA specification for permitted divider or buffer structures.
Disebarkan
Industrial Data Acquisition
The DS90LV110ATMT is suitable for distributing a timing or synchronization signal across industrial acquisition channels. One differential source can feed ten measurement or processing blocks, reducing signal branching and helping maintain a common clock domain. The device's low-power, high-speed LVDS operation suits space-conscious control systems, while the failsafe behavior provides more predictable downstream state during invalid input conditions. Validate noise margins, grounding, isolation barriers, and total capacitive loading for each installed channel.
Disebarkan
Parallel-to-Serial Link Support
The DS90LV110ATMT can provide synchronized differential clock distribution to parallel-to-serial conversion sections within a communications system. Ten outputs allow a common source timing reference to reach multiple lanes or subsystems without duplicating the originating driver. At up to 200 MHz, it supports high-speed LVDS signaling while maintaining a fully differential path. The main design consideration is lane-to-lane timing: use equalized routing where practical, account for propagation delay of 145 ps, and confirm receiver margins in the assembled channel.
Disebarkan
Test and Measurement Equipment
The DS90LV110ATMT can distribute a differential source or calibration clock to multiple acquisition, trigger, and processing sections in test equipment. Its 1:10 fanout reduces the number of source connections, while the low-noise differential architecture helps preserve signal integrity over short controlled routes. TRI-STATE control is useful for isolating unused channels during calibration or diagnostics. Because instrumentation systems often combine long internal traces with precision timing, engineers should evaluate loading, edge quality, clock uncertainty, and channel-to-channel skew.
Disebarkan
High-Speed Interface Fanout
The DS90LV110ATMT is useful when one LVDS clock or data source must feed several interface blocks with limited branch points. A one-to-ten fanout reduces the electrical burden on the original driver and keeps the internal paths fully differential, supporting low noise and low pulse-width distortion. The failsafe feature improves behavior during invalid-input conditions, while TRI-STATE outputs allow unused destinations to be disconnected. Board implementation should use controlled-impedance routing, no unnecessary stubs, suitable LVDS terminations, and verified return-path continuity.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk DS90LV110ATMT — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | DS90LV110ATMTX/NOPB | DS90LV110TMTC |
|---|---|---|---|
| Package | 28-TSSOP (PW) | 28-TSSOP (PW) | 28-TSSOP (PW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | 1-to-10 LVDS data and clock distributor | LVDS data and clock distributor | LVDS data and clock distributor |
| Failsafe and TRI-STATE Support | Failsafe with TRI-STATE output control | Failsafe and TRI-STATE output control | Failsafe and TRI-STATE output control |
Penyeberangsung Jelas
- One-to-ten LVDS fanout in a single 28-pin TSSOP (vsDS90LV110TMTC)
- Failsafe input behavior with TRI-STATE output control (vsDS90LV110ATMTX/NOPB)
- Fully differential low-noise signal distribution (vsDS90LV110ATMTX/NOPB)
Catatan Desain
Route the LVDS input as a short, continuous differential pair over a continuous ground plane, and use the same general geometry for each output pair. Avoid stubs, abrupt width changes, and discontinuities in the return path. Keep the distributor close to the source when possible, maintain a uniform differential impedance, and place any required LVDS termination close to the receiving device rather than at the distributor.
Calculate the aggregate input capacitance and loading of all connected destinations for each LVDS output. The device can provide ten outputs, but enabling unused outputs or adding long, unterminated branches can degrade edge rate and reduce timing margin. Use TRI-STATE control for inactive destinations, verify receiver loading against the Texas Instruments data sheet, and evaluate assembled-channel eye quality when the system uses a demanding clock or data rate.
Do not treat a matching package name as proof that every ordering option is interchangeable without checking the full ordering code. The DS90LV110ATMTX/NOPB and DS90LV110TMTC are identified as drop-in candidates, but production approval should still cover lead finish, traceback, enable polarity, temperature grade, and lifecycle status. Use the pin-description table to confirm all 28 connections before modifying an existing board.
Decouple the 3 V supply locally and provide a low-impedance path between the device ground pins and the LVDS return plane. Place bypass capacitance close to the appropriate supply and ground pins according to the manufacturer layout guidance. Avoid sharing narrow supply traces between output loads, and account for the approximately 145 ps propagation delay when assessing source-synchronous or multi-destination timing relationships.
Maklumat Kesediaan
No specific compliance declarations were identified for the exact DS90LV110ATMT order code. Review the manufacturer product page and current material-compliance documentation before production release.