Texas Instruments

DS90LV110ATMT - 1:10 200MHz LVDS Distributor | TI

MPN: DS90LV110ATMT ✓ فعال
3 V Vdss 160 mA Id 28-pin TSSOP (PW) Package 200 MHz Speed
حداقل سفارش: 1 |

DS90LV110ATMT نمای کلی

The Texas Instruments DS90LV110ATMT is a 1-to-10 LVDS data and clock distributor with a 200 MHz operating frequency, 145 ps propagation delay, and 160 mA output current in a 28-pin TSSOP package. It provides a fully differential signal path from input to outputs, supporting low-noise, high-speed clock distribution and other low-voltage differential signaling data paths.

An LVDS data or clock distributor is an interface IC that accepts a differential input and generates multiple differential outputs. In the signal-chain hierarchy, the DS90LV110ATMT belongs to the clock-buffer and driver class, then to interface ICs, and ultimately to broader data-conversion and communications signal conditioning. Its one-to-ten fanout allows one source to reach several destinations while reducing loading, skew, and signal degradation associated with repeated branching.

The device operates from a 3 V supply and supports signal operation from -40°C to +85°C. Its LVDS outputs can be placed in a high-impedance TRI-STATE state through the enable function. The failsafe feature provides defined behavior when the input is open, shorted, or otherwise left in an invalid state, helping downstream equipment reject corrupted data instead of propagating unpredictable logic levels.

The internal architecture keeps all data paths fully differential from the input through the outputs. This approach reduces common-mode noise and pulse-width distortion while supporting low-power, high-speed operation. At 1:10 fanout, the part is particularly useful when a central oscillator, serializer, transceiver, or controller must distribute a clock or data signal across multiple circuit blocks without introducing a separate output driver at every branch.

Typical uses include telecommunications backplanes, industrial data-acquisition systems, test equipment, parallel-to-serial and serial-to-parallel links, FPGA clock distribution, and multi-board clock synchronization. The TSSOP package also supports compact, surface-mounted PCB layouts, although high-speed differential routing and careful output-load matching remain essential.

When designing around the DS90LV110ATMT, use the manufacturer pin-description table to assign all 28 pins, route the differential input as a short balanced pair, and maintain a continuous ground reference beneath the pair. Confirm output loading, enable timing, and propagation-delay requirements for every destination because fanout and trace length can affect timing margins.

This page combines the manufacturer product information with practical application guidance, verified replacement candidates, package-aware comparisons, and design notes intended to make board-level evaluation more efficient than consulting the basic ordering description alone.

جایگزین‌های drop-in برای DS90LV110ATMT — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای DS90LV110ATMT (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Product Type, Supply Voltage.

Texas Instruments
Package: 28-TSSOP
Product Type: LVDS data and clock distributor
Supply Voltage: 3.3 V
مقایسه با DS90LV110ATMT →

DS90LV110ATMTX/NOPB

✅ جایگزین مستقیم
📦 28-TSSOP (PW)
Identical performance characteristics, terminals, and package; no electrical or PCB change indicated, subject to exact ordering-code review

📋 جایگزین مرجع (خارج از کاتالوگ)

DS90LV110TMTC

✅ جایگزین مستقیم
Texas Instruments
📦 28-TSSOP (PW)
LVDS data and clock distributor · 1:10 · 400 MHz · 1 input · 10 outputs · 10 · 1 · 3.3 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

DS90LV110ATMT مشخصات

Product Type 1-to-10 LVDS data and clock distributor
Fanout Ratio 1:10
Maximum Clock or Data Frequency 200 MHz
Propagation Delay 145 ps
Output Current 160 mA
ولتاژ تغذیه 3 V
محدوده دمای کاری -40°C to +85°C
Signal Type LVDS differential signaling
Data Path Architecture Fully differential from input to outputs
Failsafe Function Supported
Output Control TRI-STATE enable function
Power Class Low-power high-speed interface
بسته‌بندی 28-pin TSSOP (PW)
Package Width 4.40 mm
نوع نصب Surface mount

راهنمای پیکربندی پین DS90LV110ATMT 4.40 mm

پیکربندی پین برای DS90LV110ATMT (پکیج 4.40 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 4.40 mm برای DS90LV110ATMT

داده پین‌آوت تفصیلی موجود نیست برای DS90LV110ATMT.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

DS90LV110ATMT مناسب است برای 6 کاربردs: Telecommunications Backplane Clock Distribution, FPGA Clock Fanout, Industrial Data Acquisition, Parallel-to-Serial Link Support, Test and Measurement Equipment, High-Speed Interface Fanout.

🌐

Telecommunications Backplane Clock Distribution

The DS90LV110ATMT fits backplane clock distribution because it accepts one differential source and provides ten LVDS outputs at up to 200 MHz. The fully differential paths reduce noise and pulse-width distortion while the 1:10 fanout avoids adding a separate buffer at every destination. Its failsafe function also helps receivers respond predictably when the source is disconnected. In a backplane, preserve controlled differential impedance, provide a continuous ground reference, and verify receiver input capacitance across all connected branches.

🖥️

FPGA Clock Fanout

The DS90LV110ATMT can distribute a common differential clock to multiple FPGA clock inputs where fanout and skew control are important. Its 1:10 ratio supports ten destinations, while the 200 MHz operating limit covers many mid-speed digital interfaces. TRI-STATE outputs allow unused destinations to be disabled. The 28-pin TSSOP package keeps the placement compact, but designers should still use matched routing, avoid stubs, confirm clock-input thresholds, and check the FPGA specification for permitted divider or buffer structures.

🏭

Industrial Data Acquisition

The DS90LV110ATMT is suitable for distributing a timing or synchronization signal across industrial acquisition channels. One differential source can feed ten measurement or processing blocks, reducing signal branching and helping maintain a common clock domain. The device's low-power, high-speed LVDS operation suits space-conscious control systems, while the failsafe behavior provides more predictable downstream state during invalid input conditions. Validate noise margins, grounding, isolation barriers, and total capacitive loading for each installed channel.

📡

Parallel-to-Serial Link Support

The DS90LV110ATMT can provide synchronized differential clock distribution to parallel-to-serial conversion sections within a communications system. Ten outputs allow a common source timing reference to reach multiple lanes or subsystems without duplicating the originating driver. At up to 200 MHz, it supports high-speed LVDS signaling while maintaining a fully differential path. The main design consideration is lane-to-lane timing: use equalized routing where practical, account for propagation delay of 145 ps, and confirm receiver margins in the assembled channel.

🔧

Test and Measurement Equipment

The DS90LV110ATMT can distribute a differential source or calibration clock to multiple acquisition, trigger, and processing sections in test equipment. Its 1:10 fanout reduces the number of source connections, while the low-noise differential architecture helps preserve signal integrity over short controlled routes. TRI-STATE control is useful for isolating unused channels during calibration or diagnostics. Because instrumentation systems often combine long internal traces with precision timing, engineers should evaluate loading, edge quality, clock uncertainty, and channel-to-channel skew.

⚡

High-Speed Interface Fanout

The DS90LV110ATMT is useful when one LVDS clock or data source must feed several interface blocks with limited branch points. A one-to-ten fanout reduces the electrical burden on the original driver and keeps the internal paths fully differential, supporting low noise and low pulse-width distortion. The failsafe feature improves behavior during invalid-input conditions, while TRI-STATE outputs allow unused destinations to be disconnected. Board implementation should use controlled-impedance routing, no unnecessary stubs, suitable LVDS terminations, and verified return-path continuity.

What is the DS90LV110ATMT?
The DS90LV110ATMT is a Texas Instruments 1-to-10 LVDS data and clock distributor that operates up to 200 MHz. According to the manufacturer product page, it provides a fully differential input-to-output path, a failsafe function, and TRI-STATE output control. The device is packaged in a 28-pin TSSOP and is intended for distributing one high-speed differential signal to multiple loads.
What are the key specifications of DS90LV110ATMT that engineers should know?
The DS90LV110ATMT provides 1:10 fanout, a 200 MHz maximum operating frequency, 145 ps propagation delay, and 160 mA output current. The Texas Instruments product information also identifies a 3 V supply, fully differential signal paths, a failsafe function, and TRI-STATE output control. Its 28-pin TSSOP package supports compact surface-mounted designs.
How does the DS90LV110ATMT distribute LVDS signals?
The DS90LV110ATMT accepts one differential LVDS input and provides ten differential outputs, giving a 1:10 fanout ratio. Its data paths remain fully differential from input to output, which helps maintain low noise and low pulse-width distortion. The enable function can place the outputs in a high-impedance TRI-STATE state when a destination does not require an active output.
Where can I download the DS90LV110ATMT datasheet?
The official DS90LV110ATMT datasheet is accessible through the Texas Instruments DS90LV110AT product page at https://www.ti.com/product/DS90LV110AT. The page provides the device data sheet, ordering information, parameters, and application details. Use the manufacturer's pin-description table when assigning the 28 TSSOP pins because individual signal names must be checked against the exact package drawing.
Where can I find the DS90LV110ATMT pinout?
The DS90LV110ATMT pinout is found in the pin-description and terminal-configuration sections of the Texas Instruments DS90LV110AT data sheet. The component uses a 28-pin TSSOP (PW) package, and the manufacturer product page identifies that package and its 28 positions. Confirm signal names, enable polarity, and no-connect assignments directly against the data sheet before laying out or modifying a PCB.
Is DS90LV110ATMT suitable for clock fanout?
Yes, the DS90LV110ATMT is suitable for clock fanout because it is specified as a 1-to-10 data and clock distributor operating up to 200 MHz with 145 ps propagation delay. The fully differential LVDS architecture supports low-noise distribution. For demanding systems, verify output jitter, load tolerance, enable timing, and destination device input capacitance under the intended operating conditions.
What is the difference between DS90LV110ATMT and DS90LV110ATMTX?
The DS90LV110ATMTX/NOPB is identified as a complete replacement for the DS90LV110ATMT, with consistent performance, terminals, and package. Both use the 28-pin TSSOP format. According to the comparison information, no terminal or package changes are required, so the replacement can be considered for drop-in use after checking the complete ordering code, lot traceability, and production requirements.
Can DS90LV110TMTC replace DS90LV110ATMT?
The DS90LV110TMTC is identified as a complete replacement for the DS90LV110ATMT, with consistent main performance characteristics and identical terminals and package. The candidate uses the same TSSOP package family, allowing a drop-in board-level replacement. Confirm electrical details, enable behavior, temperature range, and procurement traceability against the current manufacturer documentation before production use.
What is the best drop-in replacement for DS90LV110ATMT?
The DS90LV110ATMTX/NOPB and DS90LV110TMTC are the verified drop-in candidates for the DS90LV110ATMT because comparison information describes matching terminals and packages. Only two distinct engineering-equivalent options were identified without relying on reel-code or package-ordering variants. Use the Request a Quote form on this page to request availability and a formal replacement assessment for the exact production requirement.
What can replace DS90LV110ATMT without changing the PCB?
The DS90LV110ATMTX/NOPB and DS90LV110TMTC can replace the DS90LV110ATMT without changing the PCB because the published comparison identifies identical terminals and packages and states that replacement does not require board changes. Both alternatives retain the 28-pin TSSOP format. Validate timing, output loading, enable sequencing, and temperature requirements before approving a substitution.
When should I choose DS90LV110ATMT over another LVDS distributor?
Choose the DS90LV110ATMT when the design requires one-to-ten LVDS fanout, operation up to 200 MHz, a failsafe input function, and a 28-pin TSSOP footprint. It is particularly useful for low-power clock or data distribution with fully differential paths. Select a different candidate only when its verified electrical limits, enable behavior, qualification, sourcing, or lifecycle requirements are better aligned with the system.
Is DS90LV110ATMT the same as DS90LV110TMTC?
The DS90LV110TMTC is described as a complete replacement for the DS90LV110ATMT, with consistent main performance parameters, terminals, and package. It is therefore a drop-in option rather than merely a functionally similar interface device. Exact ordering-code details should still be checked, and any replacement should be validated at the system level for timing, enable sequencing, loading, and environmental requirements.
Where can I buy DS90LV110ATMT online?
Use the Request a Quote form on this page to request DS90LV110ATMT availability, current commercial terms, and production quantities. The verified distributor listing confirms that the part is cataloged as a 1:10, 200 MHz, 28-pin TSSOP LVDS clock fanout buffer. A quote request allows the exact suffix, quantity, delivery schedule, and traceability requirements to be reviewed together.
What is the price of DS90LV110ATMT?
Current DS90LV110ATMT pricing is handled through the Request a Quote form on this page because commercial terms depend on quantity, order breaks, requested delivery date, and product condition. The verified listings identify the exact MPN and its technical configuration, but no qualifying quantity-break table is available for a static price record. Submit the required quantity and target schedule with the quote request.
What is the lead time for DS90LV110ATMT?
The current lead time for DS90LV110ATMT should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, backorder position, and delivery location. Provide the annual and forecast quantities, production schedule, and required ship date so the supply-chain response can reflect the actual procurement plan.
Is DS90LV110ATMT in stock?
DS90LV110ATMT stock status should be confirmed through the Request a Quote form on this page for the exact order quantity and delivery schedule. The manufacturer lists the DS90LV110AT family for ordering, while distributor availability can vary independently. Use the quote form to request current on-hand quantity, factory lead time, and any lot or date-code conditions.
How should DS90LV110ATMT be used in an LVDS design?
Use the DS90LV110ATMT to distribute one differential LVDS clock or data signal to as many as ten destinations, with unused outputs disabled through the enable function. According to Texas Instruments, the data paths are fully differential and designed for low-noise, low-pulse-width-distortion operation. Maintain controlled differential impedance, uninterrupted ground return, matched trace lengths, and compliant termination on the board.

داده‌های مرجع مهندسی برای DS90LV110ATMT — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the DS90LV110ATMT for compact LVDS clock or data distribution requiring one input, ten outputs, operation up to 200 MHz, and a 28-pin TSSOP footprint. Its failsafe input behavior and TRI-STATE outputs are valuable in systems where inactive destinations must be electrically isolated or where predictable recovery from invalid input states is important. The DS90LV110ATMTX/NOPB is the closest verified drop-in candidate because its terminals, package, and principal performance characteristics match; review ordering-code, traceability, and sourcing differences before substitution. The DS90LV110TMTC is also identified as a complete replacement with matching terminals and package, making it appropriate when its exact order code offers a better commercial fit. No distinct cross-brand drop-in part was confirmed, so a different manufacturer should not be assumed interchangeable without a separate engineering review.

مقایسه با جایگزین‌ها

پارامتر این محصول DS90LV110ATMTX/NOPB DS90LV110TMTC
Package 28-TSSOP (PW) 28-TSSOP (PW) 28-TSSOP (PW)
Brand Texas Instruments Texas Instruments Texas Instruments
Product Type 1-to-10 LVDS data and clock distributor LVDS data and clock distributor LVDS data and clock distributor
Failsafe and TRI-STATE Support Failsafe with TRI-STATE output control Failsafe and TRI-STATE output control Failsafe and TRI-STATE output control

تفاوت‌های کلیدی

  • One-to-ten LVDS fanout in a single 28-pin TSSOP (در مقابلDS90LV110TMTC)
  • Failsafe input behavior with TRI-STATE output control (در مقابلDS90LV110ATMTX/NOPB)
  • Fully differential low-noise signal distribution (در مقابلDS90LV110ATMTX/NOPB)

یادداشت‌های طراحی

Route the LVDS input as a short, continuous differential pair over a continuous ground plane, and use the same general geometry for each output pair. Avoid stubs, abrupt width changes, and discontinuities in the return path. Keep the distributor close to the source when possible, maintain a uniform differential impedance, and place any required LVDS termination close to the receiving device rather than at the distributor.

Calculate the aggregate input capacitance and loading of all connected destinations for each LVDS output. The device can provide ten outputs, but enabling unused outputs or adding long, unterminated branches can degrade edge rate and reduce timing margin. Use TRI-STATE control for inactive destinations, verify receiver loading against the Texas Instruments data sheet, and evaluate assembled-channel eye quality when the system uses a demanding clock or data rate.

Do not treat a matching package name as proof that every ordering option is interchangeable without checking the full ordering code. The DS90LV110ATMTX/NOPB and DS90LV110TMTC are identified as drop-in candidates, but production approval should still cover lead finish, traceback, enable polarity, temperature grade, and lifecycle status. Use the pin-description table to confirm all 28 connections before modifying an existing board.

Decouple the 3 V supply locally and provide a low-impedance path between the device ground pins and the LVDS return plane. Place bypass capacitance close to the appropriate supply and ground pins according to the manufacturer layout guidance. Avoid sharing narrow supply traces between output loads, and account for the approximately 145 ps propagation delay when assessing source-synchronous or multi-destination timing relationships.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No specific compliance declarations were identified for the exact DS90LV110ATMT order code. Review the manufacturer product page and current material-compliance documentation before production release.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

DS90LV110ATMT datasheet DS90LV110ATMT pinout DS90LV110ATMT datasheet pdf DS90LV110ATMT equivalent DS90LV110ATMT replacement DS90LV110ATMT cross reference DS90LV110ATMT vs DS90LV110TMTC DS90LV110ATMT footprint DS90LV110ATMT price Texas Instruments DS90LV110ATMT

قطعات و اصطلاحات مرتبط

Texas Instruments DS90LV110ATMT DS90LV110ATMTX/NOPB DS90LV110TMTC LVDS Low Voltage Differential Signaling data distributor clock distributor clock fanout buffer interface IC logic interface semiconductor TSSOP-28 PW package surface mount SMD fully differential signal path TRI-STATE failsafe propagation delay pulse-width distortion 200 MHz 145 ps 160 mA clock synchronization
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ