DSPIC33EV128GM106-I/PT - 70 MIPS 5V 128KB ECC Flash DSC | Microchip
MPN: DSPIC33EV128GM106-I/PT ✓ AktifDSPIC33EV128GM106-I/PT Ringkasan
A digital signal controller (DSC) is a hybrid device that combines the deterministic control architecture of a microcontroller with the deterministic math throughput of a digital signal processor. Within the power and signal-processing taxonomy, the DSC sits above general-purpose microcontrollers and below dedicated DSPs, occupying the niche where closed-loop control loops (motor control, power conversion, sensor fusion) benefit from hardware multiply-accumulate (MAC) and barrel-shifter instructions on a 16-bit datapath. The dsPIC33EV family in particular targets robust 5V operation with ECC Flash for functional-safety use cases.
Key features include execution at up to 70 MIPS from a 5V rail, hardware CAN, 4 DMA channels, 7 timers, and dedicated motor-control PWM peripherals. The 128KB of ECC Flash provides single-bit error correction and dual-bit error detection, which is essential for automotive and industrial functional-safety designs governed by IEC 61508 and ISO 26262. A 16-channel 12-bit ADC, op-amp comparators and a 5 ns comparator complete the analog front end.
The dsPIC33E core implements a Harvard architecture with a 16-bit instruction word and DSP-aware extensions, including a single-cycle MAC and a 40-bit accumulator, allowing fractional DSP arithmetic alongside integer MCU operations. Peripheral Pin Select (PPS) provides extensive I/O remapping flexibility, freeing the designer from rigid pin-function assignments.
Typical applications include automotive sensor and touch-control units, industrial motor drives with CAN networking, appliance controllers in high-electrical-noise mains environments, and functional-safety subsystems where ECC Flash and self-test libraries reduce external watchdog complexity. The 5V-tolerant design minimizes level-shifting when interfacing to legacy 5V sensors.
Design consideration: connect all VDD/VSS pin pairs and use any matched PGECx/PGEDx pair consistently for ICSP programming and debugging, because Microchip's programming guidelines require the clock and data pins to come from the same pair. Decouple each VDD with a 0.1 uF ceramic plus a bulk tantalum placed within 5 mm of the pin.
This page synthesizes distributor pricing context, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.
Pilihan pengganti yang segera untuk DSPIC33EV128GM106-I/PT — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera DSPIC33EV128GM106-I/PT (sama faktor bentuk dan kaki) — berbeza dalam Package, Core Architecture, Operating Temperature Range, Timers, Maximum CPU Speed.
DSPIC33EV128GM106-E/PT
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →DSPIC33EV128GM106-H/PT
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
DSPIC33EV128GM106T-I/PT
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →DSPIC33EV128GM106-I/PT Penilaian maksimum & Ciri-ciri Elektrik
| Core Architecture | dsPIC33E (16-bit DSC, Harvard) |
| Maximum CPU Speed | 70 MIPS |
| Program Flash | 128 KB (43K x 24), with ECC |
| RAM | 8 KB |
| Operating Voltage | 4.5 V to 5.5 V |
| Suhu Operasi | -40 C to +125 C (industrial, -I suffix) |
| Kemasan | 64-pin TQFP (10x10 mm, 0.5 mm pitch) |
| ADC | 12-bit, up to 16 channels |
| DMA Channels | 4 |
| Timers | 7 |
| CAN | 1 (hardware CAN module) |
| Comparators | Yes, with 5 ns response |
| Op-Amps | Yes, on-chip |
| PWM Channels | Yes, motor-control PWM peripherals |
| Peripheral Pin Select (PPS) | Yes |
| Functional Safety | FuSa-ready, ECC Flash, Class B safety library |
| ICSP Programming | PGECx/PGEDx pairs |
| RoHS | Compliant |
Panduan Konfigurasi Pin DSPIC33EV128GM106-I/PT 64-pin tqfp (10x10 mm, 0.5 mm pitch)
Konfigurasi pin untuk DSPIC33EV128GM106-I/PT (64-pin tqfp (10x10 mm, 0.5 mm pitch) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk DSPIC33EV128GM106-I/PT.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
DSPIC33EV128GM106-I/PT patut untuk 3 aplikasis: Sistem Ter嵌入式, Peranti IoT, Kawalan Industri.
Sistem Ter嵌入式
Pemrosesan utama dalam aplikasi ter嵌入式 menggunakan DSPIC33EV128GM106-I/PT.
Peranti IoT
Peranti bersambung pintar yang dipower oleh DSPIC33EV128GM106-I/PT.
Kawalan Industri
Sistem pengawalan dan automatik menggunakan DSPIC33EV128GM106-I/PT.
Tiada FAQ tersedia untuk produk ini.
Data referensi kejuruteraan untuk DSPIC33EV128GM106-I/PT — perbandingan, panduan rancangan, dan maklumat kesediaan
Perbandingan dengan Gantian
| Parametr | Produk Ini | DSPIC33EV128GM106-E/PT | DSPIC33EV128GM106-H/PT | DSPIC33EV128GM106T-I/PT |
|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm, 0.5 mm pitch) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB ECC (43K x 24) | 128 KB ECC | 128 KB ECC | 128 KB ECC |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB |
| Core Performance | 16-bit, up to 70 MIPS | 16-bit, up to 70 MIPS | 16-bit, 40 MHz core basis | 16-bit, up to 70 MIPS |
| Temperature Grade | Industrial (-40C to +85C, I suffix) | Extended (to +125C, E suffix) | Industrial -40C range | Industrial (I suffix) |
| DMA Channels / Timers | 4 / 7 | 4 / 7 | 4 / 7 | 4 / 7 |
| Packaging Format | Tray | Tray | Tray | Tape & Reel |
Penyeberangsung Jelas
- 5V-native operation (vsSTM32F3 series)
- Extended-temperature same-die upgrade path (vsDSPIC33EV128GM106-E/PT)
- ECC Flash for noise immunity (vsPIC17C756A-33I/PT (legacy))
Catatan Desain
Connect ALL VDD and VSS pins of the 64-TQFP package to the 5V rail and ground planes - Microchip programming documentation explicitly requires all supply pins connected for reliable ICSP and operation. Place a 100 nF ceramic decoupling capacitor at each VDD/VSS pair, close to the pins, plus bulk capacitance near the regulator. The 10x10 mm TQFP with 0.5 mm pitch requires standard 0.5 mm pitch land patterns per IPC-7351 conventions; verify solder-mask openings for the fine-pitch corners.
When wiring the ICSP header, use clock and data pins from the SAME PGECx/PGEDx pair - the dsPIC33EV128GM106 has multiple pairs and mixing (e.g., PGEC2 for ICSPCLK with PGED1 for ICSPDAT) prevents programming. Per Northern Software device notes, any pair may be used but must be kept matched. Also verify the supply stays within 4.5V-5.5V under all load transients; brownouts below the minimum can corrupt Flash writes during field firmware updates.
The 5V-native core is an advantage but also a thermal consideration: at 70 MIPS with all peripherals active, current consumption is highest of the family operating points (exact Idd figures: consult the family datasheet DS70005144H electrical characteristics tables). Estimated: at a typical 60-80 mA active current from a 5V rail, the DSC dissipates roughly 0.3-0.4 W, which the 64-TQFP theta_JA can handle on a standard 2-layer board without heatsinking; confirm against the datasheet table for your clock configuration.
The 5V I/O domain gives roughly 50% more noise margin than 3.3V logic, which is the family's key value in motor-drive and automotive cabinets - exploit it by routing long sensor lines at 5V levels rather than adding shielded cables for 3.3V signals. For CAN nodes, keep the transceiver (e.g., MCP2551) close to the CAN pins and stub the bus symmetrically. The hardware barrel shifter and MAC instructions run deterministically, so keep ISR paths free of division-heavy code to preserve real-time jitter budgets.
Maklumat Kesediaan
Compliance status of the exact ordering code is not stated in the reviewed data; verify on the Microchip product page environmental datasheet. The family is positioned by Microchip for automotive applications, and DigiKey lists Functional Safety (FuSa) supported variants within the dsPIC33EV family.
