KSZ8031RNL-TR - 100Mbps Ethernet PHY | Microchip Technology
MPN: KSZ8031RNL-TR ✓ AktifKSZ8031RNL-TR Ringkasan
An Ethernet PHY is the physical-layer device that converts digital parallel or serial controller traffic into signals suitable for transmission over copper cable. It also receives analog signals from the cable and restores them as digital data. Within the network hierarchy, the KSZ8031RNL-TR sits between an Ethernet MAC or embedded host and the physical network, providing the 10/100 Ethernet link layer interface required for industrial control, embedded networking, and communications equipment.
Key features include support for both 10Base-T and 100Base-TX operation, a full RMII interface, compatibility with MII signaling, and a 3.3 V single-supply design. The operating supply range is 3.135 V to 3.465 V, while the stated operating-temperature range is 0°C to +70°C. Its lead-free 24-QFN package supports compact surface-mount layouts in space-constrained embedded systems.
The device is designed for single-port 10/100 Ethernet connectivity using standard CAT-5 UTP cable. Its RMII interface provides a comparatively compact connection to a network controller, making it suitable for systems where connector count, board area, and host processor resources must be controlled. MII support expands compatibility with controllers using the parallel Ethernet interface, although final host timing and signaling must follow the manufacturer datasheet.
Typical applications include industrial Ethernet equipment, embedded control systems, factory automation interfaces, set-top and communications equipment, and network-connected test instruments. In these systems, the PHY can be placed close to the RJ-45 magnetics, with controlled differential routing between the transceiver and magnetics. A separate Ethernet controller such as the KSZ8001LA3TR can provide the higher-layer MAC functions when the host does not integrate them.
Layout quality is critical in an Ethernet design. Place the PHY close to the magnetic component, keep the differential pairs short and impedance-controlled, provide the specified local decoupling, and observe the manufacturer’s component placement and exposed-pad requirements. Verify magnetics selection, termination, isolation, and cable compatibility before production release.
This page consolidates the functional characteristics, sourcing information, replacement constraints, and PCB design considerations for engineers evaluating the KSZ8031RNL-TR. It also distinguishes true pin-compatible options from related Ethernet PHYs whose register interfaces or pin assignments require PCB or firmware changes.
Pilihan pengganti yang segera untuk KSZ8031RNL-TR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera KSZ8031RNL-TR (sama faktor bentuk dan kaki) — berbeza dalam Product Type, Package, Cable Type, Host Interface, RMII Reference Clock.
KSZ8021RNL
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →KSZ8031RNL-TR Spesifikasi
| Product Type | 10/100 Ethernet PHY transceiver |
| Supported Data Rates | 10 Mbps and 100 Mbps |
| Ethernet Standards | 10Base-T and 100Base-TX |
| Host Interface | RMII and MII |
| Supply Type | Single supply |
| Nominal Supply Voltage | 3.3 V |
| Operating Supply Voltage Range | 3.135 V to 3.465 V |
| Cable Type | CAT-5 UTP |
| Number of Ports | 1 port |
| Kemasan | 24-QFN, 4 mm × 4 mm |
| Jenis Pemasangan | Surface mount |
| Gambaran Suhu Operasi | 0°C to +70°C |
| Lead-Free Construction | Lead-free package |
Panduan Konfigurasi Pin KSZ8031RNL-TR 24-qfn, 4 mm × 4 mm
Konfigurasi pin untuk KSZ8031RNL-TR (24-qfn, 4 mm × 4 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk KSZ8031RNL-TR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
KSZ8031RNL-TR patut untuk 6 aplikasis: Industrial Ethernet Control Equipment, Embedded Network Communication Modules, Factory Sensor and Actuator Gateways, Networked Test and Measurement Instruments, Communications and Set-Top Equipment, Home and Building Network Interfaces.
Industrial Ethernet Control Equipment
The KSZ8031RNL-TR is appropriate for a single 10/100 Ethernet link in PLCs, industrial controllers, and factory automation equipment. Its 10Base-T and 100Base-TX support covers legacy 10 Mbps networks as well as 100 Mbps links over CAT-5 UTP, while the 3.3 V single-supply operation simplifies integration with 3.3 V host electronics. Place the PHY close to the Ethernet magnetics, preserve controlled impedance on the differential pairs, and confirm that the stated 0°C to +70°C operating range covers the enclosure temperature. A controller such as the KSZ8001LA3TR can supply the MAC functions when the host processor does not include them.
Disebarkan
Embedded Network Communication Modules
The KSZ8031RNL-TR provides a compact Ethernet physical layer for embedded gateways, communication modules, and data concentrators. The 24-QFN 4 mm × 4 mm package limits board area, while RMII provides a practical option for hosts that need a smaller parallel interface than MII. Its 100 Mbps maximum rate supports control traffic, telemetry, management traffic, and firmware updates. Keep the PHY-to-magnetics path short, route each Ethernet differential pair as a controlled-impedance pair, and observe the manufacturer’s decoupling and exposed-pad guidance. Host-side MAC capability can be supplied by a dedicated controller such as the KSZ8001LA3TR.
Disebarkan
Factory Sensor and Actuator Gateways
The KSZ8031RNL-TR can bridge an embedded controller to a 10/100 Ethernet fieldbus or supervisory network in a sensor and actuator gateway. Supporting both 10Base-T and 100Base-TX allows the same hardware to interoperate with both 10 Mbps and 100 Mbps infrastructure, reducing the need for separate physical layers. The 3.3 V supply range of 3.135 V to 3.465 V aligns with many embedded processor platforms. Design the magnetic-device interface around the manufacturer’s recommended layout, use suitable surge protection for industrial cables, and avoid extending differential traces beyond the guidance in the datasheet.
Disebarkan
Networked Test and Measurement Instruments
The KSZ8031RNL-TR is suitable for laboratory instruments that need a single Ethernet management or data port. The 100 Mbps 100Base-TX mode supports routine instrument control, logging, and firmware transfer over existing CAT-5 infrastructure, while 10Base-T support provides compatibility with slower legacy networks. RMII can simplify the host interface in a compact instrument, although timing and clock requirements must match the controller. Keep the Ethernet section isolated from sensitive analog sections, use a dedicated analog ground strategy, and route transformer-side copper away from high-switching-current paths to minimize coupling.
Disebarkan
Communications and Set-Top Equipment
The KSZ8031RNL-TR is well suited to compact communications equipment requiring a single wired Ethernet connection. Its lead-free 24-QFN package supports high-density assembly, and its 10/100 Mbps capability allows interoperability with common access equipment and control networks. The MII option can support legacy controller architectures, while RMII offers a smaller host footprint for newer designs. Confirm the exact controller clocking and configuration requirements in the datasheet, place local decoupling close to the supply pins, and keep the magnetics and PHY on the same board-side region of the isolation barrier.
Disebarkan
Home and Building Network Interfaces
The KSZ8031RNL-TR can provide the physical layer for a wired building-control node, access module, or compact network bridge. Its support for both 10 Mbps and 100 Mbps Ethernet allows the same hardware to interoperate with older 10Base-T equipment and faster 100Base-TX networks. The 3.3 V supply requirement is compatible with many embedded controller platforms, while the small QFN package preserves board area. Apply the manufacturer’s recommended magnetics interface and differential-routing geometry, and provide suitable isolation or surge protection for cables that leave the enclosure.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk KSZ8031RNL-TR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | KSZ8021RNL |
|---|---|---|
| Package | 24-QFN (4x4) | 24-QFN (4x4) |
| Brand | Microchip Technology | Microchip Technology |
Penyeberangsung Jelas
- Supports both compact RMII and conventional MII host interfaces (vsKSZ8021RNL)
- Specified commercial operating range (vsKSZ8021RNL)
- Single-port 10/100 Ethernet with 3.3 V operation (vsKSZ8021RNL)
Catatan Desain
Place the KSZ8031RNL-TR close to the Ethernet magnetics and follow the manufacturer’s recommended component-placement geometry. Keep the PHY-to-magnetics differential traces short, matched, and impedance controlled. Maintain the specified spacing around the exposed pad and use the datasheet’s thermal-via pattern when the PCB stackup requires additional heat spreading.
Treat the Ethernet differential pairs as controlled-impedance routed pairs from the PHY through the magnetics. Avoid vias and layer changes where possible, keep surrounding copper geometry consistent, and do not place noisy switching nodes parallel to the pairs. Verify the completed PCB with the magnetics and PHY on the same side of the isolation barrier as required by the reference layout.
Do not assume that another KSZ Ethernet PHY is a drop-in replacement merely because it uses a 24-QFN package. Compare lead assignments, strap inputs, supply sequencing, clocking, and management registers against the manufacturer’s datasheet and migration guide. The published KSZ8021/KSZ8031-to-KSZ8081/KSZ8091 migration material identifies hardware differences that can prevent direct substitution.
Use the datasheet’s recommended local decoupling network and place it adjacent to the relevant supply and ground pins. Keep the 3.3 V rail within 3.135 V to 3.465 V under startup, steady-state, and transient conditions. Separate noisy digital and switching-converter return currents from the Ethernet PHY and magnetics grounding path to avoid coupling into the differential receive signals.
Maklumat Kesediaan
The manufacturer datasheet states that the KSZ8021RNL and KSZ8031RNL are available in 24-pin lead-free QFN packages. No explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was established for the exact ordering suffix.