Microchip Technology

KSZ8031RNL-TR - 100Mbps Ethernet PHY | Microchip Technology

MPN: KSZ8031RNL-TR ✓ فعال
Single supply Vdss 10Base-T and 100Base-TX Rds(on) 24-QFN, 4 mm × 4 mm Package
حداقل سفارش: 1 |

KSZ8031RNL-TR نمای کلی

The Microchip Technology KSZ8031RNL-TR is a single-supply 10Base-T and 100Base-TX Ethernet physical layer transceiver with a 100 Mbps data rate, a 3.3 V supply, and a 24-QFN 4 mm × 4 mm package. It connects an Ethernet controller or embedded processor to standard CAT-5 unshielded twisted-pair cabling through its RMII or MII interface.

An Ethernet PHY is the physical-layer device that converts digital parallel or serial controller traffic into signals suitable for transmission over copper cable. It also receives analog signals from the cable and restores them as digital data. Within the network hierarchy, the KSZ8031RNL-TR sits between an Ethernet MAC or embedded host and the physical network, providing the 10/100 Ethernet link layer interface required for industrial control, embedded networking, and communications equipment.

Key features include support for both 10Base-T and 100Base-TX operation, a full RMII interface, compatibility with MII signaling, and a 3.3 V single-supply design. The operating supply range is 3.135 V to 3.465 V, while the stated operating-temperature range is 0°C to +70°C. Its lead-free 24-QFN package supports compact surface-mount layouts in space-constrained embedded systems.

The device is designed for single-port 10/100 Ethernet connectivity using standard CAT-5 UTP cable. Its RMII interface provides a comparatively compact connection to a network controller, making it suitable for systems where connector count, board area, and host processor resources must be controlled. MII support expands compatibility with controllers using the parallel Ethernet interface, although final host timing and signaling must follow the manufacturer datasheet.

Typical applications include industrial Ethernet equipment, embedded control systems, factory automation interfaces, set-top and communications equipment, and network-connected test instruments. In these systems, the PHY can be placed close to the RJ-45 magnetics, with controlled differential routing between the transceiver and magnetics. A separate Ethernet controller such as the KSZ8001LA3TR can provide the higher-layer MAC functions when the host does not integrate them.

Layout quality is critical in an Ethernet design. Place the PHY close to the magnetic component, keep the differential pairs short and impedance-controlled, provide the specified local decoupling, and observe the manufacturer’s component placement and exposed-pad requirements. Verify magnetics selection, termination, isolation, and cable compatibility before production release.

This page consolidates the functional characteristics, sourcing information, replacement constraints, and PCB design considerations for engineers evaluating the KSZ8031RNL-TR. It also distinguishes true pin-compatible options from related Ethernet PHYs whose register interfaces or pin assignments require PCB or firmware changes.

جایگزین‌های drop-in برای KSZ8031RNL-TR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای KSZ8031RNL-TR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Product Type, Package, Cable Type, Host Interface, RMII Reference Clock.

Microchip Technology
Product Type: 10Base-T/100Base-TX Ethernet physical-layer transceiver
Package: 24-QFN with exposed pad, 4 mm x 4 mm
Cable Type: CAT-5 unshielded twisted pair (UTP)
مقایسه با KSZ8031RNL-TR →
Microchip Technology
Product Type: 10BASE-T/100BASE-TX Ethernet PHY transceiver
Package: 24-QFN with exposed pad, 4 mm x 4 mm
Host Interface: Full RMII
مقایسه با KSZ8031RNL-TR →

KSZ8021RNL

✅ جایگزین مستقیم
Microchip Technology
📦 24-QFN (4x4)
10Base-T/100Base-TX Ethernet physical-layer transceiver · 10 Mbps and 100 Mbps · 10Base-T and 100Base-TX · Reduced Media Independent Interface (RMII) · 50 MHz · Single supply · CAT-5 unshielded twisted pair (UTP) · 24-QFN with exposed pad, 4 mm x 4 mm

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

KSZ8031RNL-TR مشخصات

Product Type 10/100 Ethernet PHY transceiver
Supported Data Rates 10 Mbps and 100 Mbps
Ethernet Standards 10Base-T and 100Base-TX
Host Interface RMII and MII
Supply Type Single supply
Nominal Supply Voltage 3.3 V
Operating Supply Voltage Range 3.135 V to 3.465 V
Cable Type CAT-5 UTP
Number of Ports 1 port
بسته‌بندی 24-QFN, 4 mm × 4 mm
نوع نصب Surface mount
محدوده دمای کاری 0°C to +70°C
Lead-Free Construction Lead-free package

راهنمای پیکربندی پین KSZ8031RNL-TR 24-qfn, 4 mm × 4 mm

پیکربندی پین برای KSZ8031RNL-TR (پکیج 24-qfn, 4 mm × 4 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 24-qfn, 4 mm × 4 mm برای KSZ8031RNL-TR

داده پین‌آوت تفصیلی موجود نیست برای KSZ8031RNL-TR.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

KSZ8031RNL-TR مناسب است برای 6 کاربردs: Industrial Ethernet Control Equipment, Embedded Network Communication Modules, Factory Sensor and Actuator Gateways, Networked Test and Measurement Instruments, Communications and Set-Top Equipment, Home and Building Network Interfaces.

🏭

Industrial Ethernet Control Equipment

The KSZ8031RNL-TR is appropriate for a single 10/100 Ethernet link in PLCs, industrial controllers, and factory automation equipment. Its 10Base-T and 100Base-TX support covers legacy 10 Mbps networks as well as 100 Mbps links over CAT-5 UTP, while the 3.3 V single-supply operation simplifies integration with 3.3 V host electronics. Place the PHY close to the Ethernet magnetics, preserve controlled impedance on the differential pairs, and confirm that the stated 0°C to +70°C operating range covers the enclosure temperature. A controller such as the KSZ8001LA3TR can supply the MAC functions when the host processor does not include them.

🌐

Embedded Network Communication Modules

The KSZ8031RNL-TR provides a compact Ethernet physical layer for embedded gateways, communication modules, and data concentrators. The 24-QFN 4 mm × 4 mm package limits board area, while RMII provides a practical option for hosts that need a smaller parallel interface than MII. Its 100 Mbps maximum rate supports control traffic, telemetry, management traffic, and firmware updates. Keep the PHY-to-magnetics path short, route each Ethernet differential pair as a controlled-impedance pair, and observe the manufacturer’s decoupling and exposed-pad guidance. Host-side MAC capability can be supplied by a dedicated controller such as the KSZ8001LA3TR.

🧩

Factory Sensor and Actuator Gateways

The KSZ8031RNL-TR can bridge an embedded controller to a 10/100 Ethernet fieldbus or supervisory network in a sensor and actuator gateway. Supporting both 10Base-T and 100Base-TX allows the same hardware to interoperate with both 10 Mbps and 100 Mbps infrastructure, reducing the need for separate physical layers. The 3.3 V supply range of 3.135 V to 3.465 V aligns with many embedded processor platforms. Design the magnetic-device interface around the manufacturer’s recommended layout, use suitable surge protection for industrial cables, and avoid extending differential traces beyond the guidance in the datasheet.

🔧

Networked Test and Measurement Instruments

The KSZ8031RNL-TR is suitable for laboratory instruments that need a single Ethernet management or data port. The 100 Mbps 100Base-TX mode supports routine instrument control, logging, and firmware transfer over existing CAT-5 infrastructure, while 10Base-T support provides compatibility with slower legacy networks. RMII can simplify the host interface in a compact instrument, although timing and clock requirements must match the controller. Keep the Ethernet section isolated from sensitive analog sections, use a dedicated analog ground strategy, and route transformer-side copper away from high-switching-current paths to minimize coupling.

📡

Communications and Set-Top Equipment

The KSZ8031RNL-TR is well suited to compact communications equipment requiring a single wired Ethernet connection. Its lead-free 24-QFN package supports high-density assembly, and its 10/100 Mbps capability allows interoperability with common access equipment and control networks. The MII option can support legacy controller architectures, while RMII offers a smaller host footprint for newer designs. Confirm the exact controller clocking and configuration requirements in the datasheet, place local decoupling close to the supply pins, and keep the magnetics and PHY on the same board-side region of the isolation barrier.

🧩

Home and Building Network Interfaces

The KSZ8031RNL-TR can provide the physical layer for a wired building-control node, access module, or compact network bridge. Its support for both 10 Mbps and 100 Mbps Ethernet allows the same hardware to interoperate with older 10Base-T equipment and faster 100Base-TX networks. The 3.3 V supply requirement is compatible with many embedded controller platforms, while the small QFN package preserves board area. Apply the manufacturer’s recommended magnetics interface and differential-routing geometry, and provide suitable isolation or surge protection for cables that leave the enclosure.

What is the KSZ8031RNL-TR?
The KSZ8031RNL-TR is a single-port, 10/100 Ethernet physical-layer transceiver from Microchip Technology. It supports 10Base-T and 100Base-TX data rates up to 100 Mbps, communicates with a host through RMII or MII, and operates from a 3.3 V single supply. According to the manufacturer datasheet, it is intended for data transmission and reception over standard CAT-5 unshielded twisted-pair cable.
What is the operating voltage of the KSZ8031RNL-TR?
The KSZ8031RNL-TR operates from 3.135 V to 3.465 V, with 3.3 V as the nominal supply voltage. According to the KSZ8031RNL manufacturer datasheet, the device uses a single-supply architecture, so the same supply rail supports its Ethernet transceiver functions. The external Ethernet magnetics and host interface must also be compatible with the selected 3.3 V power architecture.
Where can I download the KSZ8031RNL-TR datasheet PDF?
The KSZ8031RNL-TR datasheet PDF is available from Microchip Technology at the official document link on this page. The document covers the KSZ8021RNL and KSZ8031RNL, including the 24-pin lead-free QFN package, electrical characteristics, host-interface information, and application guidance. Use the manufacturer datasheet for the authoritative pin description and application circuit because related PHY pages may describe different register sets.
Where can I find the KSZ8031RNL-TR pinout?
The KSZ8031RNL-TR pinout is defined in the pin-description section of the manufacturer datasheet for the 24-QFN package. The device uses 24 leads plus the package thermal or exposed pad shown by the package drawing. Use that pin table when assigning RMII, MII, power, clock, and configuration signals, and cross-check every connection against the selected revision of the schematic.
How fast is the KSZ8031RNL-TR Ethernet link?
The KSZ8031RNL-TR supports 10 Mbps and 100 Mbps Ethernet operation. Its 100Base-TX mode reaches 100 Mbps over standard CAT-5 UTP cable, while 10Base-T supports 10 Mbps links. According to the manufacturer datasheet, the PHY is a 10/100 Ethernet physical-layer device rather than a multi-port switch, so an Ethernet MAC or equivalent host-side controller is required.
Does the KSZ8031RNL-TR support RMII and MII?
Yes, the KSZ8031RNL-TR supports both RMII and MII host interfaces. RMII offers a reduced pin count for controllers designed around that interface, while MII supports conventional parallel Ethernet controller signaling. According to the manufacturer datasheet, host configuration and interface requirements must be reviewed together because the two modes present different pin assignments and timing requirements.
What is the difference between RMII and MII for the KSZ8031RNL-TR?
RMII uses a more compact controller interface than MII and can reduce host pin count when the Ethernet controller supports RMII. MII provides the conventional parallel data and control interface used by many established controllers. The KSZ8031RNL-TR supports both interfaces, but its actual mode, clocking method, and signal mapping must follow the host-controller configuration in the manufacturer datasheet.
When should I choose the KSZ8031RNL-TR instead of a related KSZ PHY?
Choose the KSZ8031RNL-TR when the design requires a single-port 10/100 Ethernet PHY with 3.3 V operation, CAT-5 UTP connectivity, and either RMII or MII host signaling. Select a different family member when the design requires newer auto-negotiation behavior, different media support, different management features, or a migration path explicitly documented by the manufacturer. Related KSZ devices with pin differences are not drop-in replacements.
What is the best drop-in replacement for the KSZ8031RNL-TR?
The closest same-footprint replacement must match the 24-QFN lead assignments, 3.3 V supply range, RMII or MII configuration, and 10/100 Ethernet functions. Related KSZ8021RNL and KSZ8031RNL variants can share the package family, but package similarity alone does not prove register and pin compatibility. Request the manufacturer migration information and complete the application checklist before approving any substitute.
Can the KSZ8051RNLI-TR replace the KSZ8031RNL-TR?
The KSZ8051RNLI-TR should not be treated as a drop-in replacement without a complete compatibility review. Although it belongs to the same Ethernet PHY product family, related KSZ devices can differ in pin assignments, configuration straps, clocking, and management registers. The published migration material identifies hardware differences between KSZ8021/KSZ8031 and KSZ8081/KSZ8091, demonstrating that related family members can require board or firmware changes.
Is the KSZ8031RNL-TR suitable for an industrial control system?
The KSZ8031RNL-TR is suitable for many 10/100 Ethernet industrial-control links when its 0°C to +70°C operating range is acceptable. It operates from 3.135 V to 3.465 V and supports CAT-5 UTP, making it appropriate for embedded controllers, factory equipment, and communications equipment. Select magnetics and surge protection appropriate to the installation, and verify environmental requirements beyond the device’s stated temperature range.
Where can I buy the KSZ8031RNL-TR and check its price and lead time?
Use the Request a Quote form on this page to ask for current KSZ8031RNL-TR price, stock, quantity breaks, and lead time. The form routes the request for the exact -TR ordering suffix, helping avoid confusion with base-device or non-tape-and-reel variants. For an immediate design decision, confirm the required reel quantity, authorized sourcing route, and delivery schedule with the supplier responding to the quotation request.
Is the KSZ8031RNL-TR currently in stock?
Current inventory should be confirmed through the Request a Quote form on this page because stock levels and lead times change with demand. Include the required reel quantity, target date, and whether substitutions are permitted in the request. Engineers should also verify the exact -TR suffix and lead-free 24-QFN package before approving the procurement line.
What is the lead time for the KSZ8031RNL-TR?
The current lead time for the KSZ8031RNL-TR must be confirmed through the Request a Quote form on this page. Include the annual and build quantities, reel packaging requirement, target production date, and acceptable alternate-part policy. A supplier can then check exact-MPN inventory and supply conditions rather than returning a generic Ethernet-controller lead time.
What are the key specifications engineers should know about the KSZ8031RNL-TR?
The main engineering specifications are a 10 Mbps or 100 Mbps data rate, 10Base-T and 100Base-TX support, 3.135 V to 3.465 V single-supply operation, RMII and MII host interfaces, and a lead-free 24-QFN 4 mm × 4 mm package. The stated operating-temperature range is 0°C to +70°C. According to the manufacturer datasheet, the device is a single-port PHY for standard CAT-5 UTP rather than a multi-port Ethernet switch.
What cross-brand Ethernet PHY matches the KSZ8031RNL-TR?
No cross-brand drop-in match can be confirmed from the published cross-reference results because a genuine replacement requires identical 24-QFN lead assignments, compatible RMII or MII timing, 3.3 V operation, and equivalent management-register behavior. Manufacturers such as Microchip, Texas Instruments, onsemi, and Broadcom offer related Ethernet PHYs, but related functionality does not by itself establish drop-in compatibility. Compare the candidate’s official pin table and migration notes before selecting it.

داده‌های مرجع مهندسی برای KSZ8031RNL-TR — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the KSZ8031RNL-TR for a single-port 10/100 Ethernet design that uses a 3.3 V supply and connects to its host through RMII or MII. It is particularly suitable when the equipment must support both 10Base-T and 100Base-TX links and operate within the stated 0°C to +70°C range. The KSZ8021RNL is the closest same-package option identified by the published material, but confirm its pin and register compatibility before using it as a drop-in substitute. The KSZ8051RNLI-TR, KSZ8041NLA3TR, and KSZ8081-family devices should not be selected solely on Ethernet functionality because related KSZ products can have different pin assignments, straps, clocking, or management registers. If the design requires automotive qualification, extended temperature operation, enhanced media capability, or a newer migration path, select a device with those requirements explicitly documented rather than forcing a board change around the KSZ8031RNL-TR.

مقایسه با جایگزین‌ها

پارامتر این محصول KSZ8021RNL
Package 24-QFN (4x4) 24-QFN (4x4)
Brand Microchip Technology Microchip Technology

تفاوت‌های کلیدی

  • Supports both compact RMII and conventional MII host interfaces (در مقابلKSZ8021RNL)
  • Specified commercial operating range (در مقابلKSZ8021RNL)
  • Single-port 10/100 Ethernet with 3.3 V operation (در مقابلKSZ8021RNL)

یادداشت‌های طراحی

Place the KSZ8031RNL-TR close to the Ethernet magnetics and follow the manufacturer’s recommended component-placement geometry. Keep the PHY-to-magnetics differential traces short, matched, and impedance controlled. Maintain the specified spacing around the exposed pad and use the datasheet’s thermal-via pattern when the PCB stackup requires additional heat spreading.

Treat the Ethernet differential pairs as controlled-impedance routed pairs from the PHY through the magnetics. Avoid vias and layer changes where possible, keep surrounding copper geometry consistent, and do not place noisy switching nodes parallel to the pairs. Verify the completed PCB with the magnetics and PHY on the same side of the isolation barrier as required by the reference layout.

Do not assume that another KSZ Ethernet PHY is a drop-in replacement merely because it uses a 24-QFN package. Compare lead assignments, strap inputs, supply sequencing, clocking, and management registers against the manufacturer’s datasheet and migration guide. The published KSZ8021/KSZ8031-to-KSZ8081/KSZ8091 migration material identifies hardware differences that can prevent direct substitution.

Use the datasheet’s recommended local decoupling network and place it adjacent to the relevant supply and ground pins. Keep the 3.3 V rail within 3.135 V to 3.465 V under startup, steady-state, and transient conditions. Separate noisy digital and switching-converter return currents from the Ethernet PHY and magnetics grounding path to avoid coupling into the differential receive signals.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Yes
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer datasheet states that the KSZ8021RNL and KSZ8031RNL are available in 24-pin lead-free QFN packages. No explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was established for the exact ordering suffix.

جستجوهای مرتبط

KSZ8031RNL-TR datasheet KSZ8031RNL-TR pinout KSZ8031RNL-TR datasheet pdf KSZ8031RNL-TR equivalent KSZ8031RNL-TR replacement KSZ8031RNL-TR cross reference KSZ8031RNL-TR footprint KSZ8031RNL-TR price KSZ8031RNL-TR stock Microchip KSZ8031RNL-TR KSZ8031RNL-TR RMII MII KSZ8031RNL-TR 24-QFN KSZ8031RNL vs KSZ8021RNL KSZ8031RNL-TR Ethernet PHY KSZ8031RNL-TR industrial Ethernet

قطعات و اصطلاحات مرتبط

Microchip Technology KSZ8031RNL-TR KSZ8031RNL KSZ8021RNL KSZ8001LA3TR Ethernet PHY physical-layer transceiver 10Base-T 100Base-TX RMII MII Ethernet MAC CAT-5 UTP 10 Mbps 100 Mbps 3.3 V 24-QFN QFN family surface mount SMD industrial Ethernet embedded networking differential pair lead-free package
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ