Microchip Technology

LAN8700IC-AEZG-TR - 10/100 Ethernet PHY | Microchip

MPN: LAN8700IC-AEZG-TR ✓ Aktif
3.3 V Vdss 36-pin QFN, 6 mm × 6 mm Package 50 MHz ±50 ppm Speed
MOQ: 1 |

LAN8700IC-AEZG-TR Ringkasan

The Microchip Technology LAN8700IC-AEZG-TR is a single-channel 10/100 Mbps Ethernet physical-layer transceiver with full MII and RMII support, supplied in a 36-pin QFN package measuring 6 mm by 6 mm. The device operates from a 3.3 V supply, provides ±15 kV ESD-protected network interfaces, and includes HP Auto-MDIX support for automatic crossover handling. Its tape-and-reel ordering code is intended for automated manufacturing and surface-mount assembly.

An Ethernet PHY is the physical-layer component that converts digital frame data into electrical signals suitable for a twisted-pair Ethernet cable. It sits below the Ethernet MAC in the protocol hierarchy and above the physical magnetics and connector. The LAN8700 family is categorized as a variable-I/O-voltage analog interface IC for embedded Ethernet systems, with MII and RMII host interfaces allowing integration with microcontrollers, processors, and programmable logic.

The principal feature set includes support for both 10 Mbps and 100 Mbps Ethernet operation, full MII and RMII interfaces, HP Auto-MDIX, ±15 kV ESD protection, and flexPWR technology. The variable-I/O arrangement helps accommodate systems in which the PHY communicates with host logic operating at a lower voltage. A 50 MHz reference clock with a tolerance of ±50 ppm and a duty cycle from 40% through 60% provides the timing reference used by the LAN8700/LAN8700i family.

From a design perspective, the PHY separates Ethernet medium access from the host processor’s digital bus. MII provides separate controls and parallel data paths, while RMII reduces the number of host-interface signals for compact embedded designs. The network side connects through the external magnetics path required by a conventional 10/100BASE-T Ethernet port, allowing the PHY to remain independent from the connector and transformer implementation.

Typical implementations include industrial embedded controllers, networked sensors, building-automation equipment, communications modules, and compact data-acquisition systems. The part is particularly useful when an embedded processor already provides a MII or RMII interface and the design needs standards-based 10/100 Ethernet connectivity without implementing analog Ethernet signaling directly.

The primary design consideration is matching the host bus voltage, clock requirements, and digital timing to the selected processor. PCB layout must also preserve the differential characteristics of the transmit and receive pairs, maintain appropriate separation from switching circuitry, and follow the manufacturer’s guidance for the QFN exposed pad and external magnetics network.

This page combines interface capabilities, ordering information, application guidance, package details, and replacement analysis to support faster engineering evaluation. It also distinguishes true package-compatible alternatives from related Ethernet products that would require different pinouts, interfaces, or board layouts.

Pilihan pengganti yang segera untuk LAN8700IC-AEZG-TR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

LAN8700C-AEZG-AR2

✅ Masuk Drop-In
Microchip Technology
📦 36-pin QFN, 6 mm × 6 mm
10 Mb/s or 100 Mb/s · Full MII and RMII · HP Auto-MDIX supported · ±15 kV · 1.6 V to 3.6 V · Supported · 36-QFN (6 mm × 6 mm) · Present

Hubungi untuk harga

Lihat Datasheet →

LAN8700C-AEZG

✅ Masuk Drop-In
📦 36-pin QFN, 6 mm × 6 mm
Uses the same 36-pin QFN footprint and single-channel 10/100 Mbps Ethernet interface; carrier format and ordering suffix differ from the -TR part

📋 Alternatif rujukan (tidak dalam katalog)

LAN8700IC-AEZG-TR Spesifikasi

Product Type 10/100 Ethernet physical-layer transceiver
Supported Data Rates 10 Mbps and 100 Mbps
Tegangan Pemberi Arus 3.3 V
Host Interface Full MII and RMII
Ethernet Channel Count 1 channel
Network Interface Analog 10/100BASE-T Ethernet
Auto-MDIX HP Auto-MDIX supported
ESD Protection ±15 kV
Reference Clock Frequency 50 MHz ±50 ppm
Reference Clock Duty Cycle 40% to 60%
Kemasan 36-pin QFN, 6 mm × 6 mm
Exposed Pad Present
Jenis Pemasangan Surface mount
Shipping Format Tape and reel
Operating Temperature Class Industrial temperature
Power Technology flexPWR technology

Panduan Konfigurasi Pin LAN8700IC-AEZG-TR 36-pin qfn, 6 mm × 6 mm

Konfigurasi pin untuk LAN8700IC-AEZG-TR (36-pin qfn, 6 mm × 6 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 36-pin qfn, 6 mm × 6 mm untuk LAN8700IC-AEZG-TR

Tiada data garisan pin yang diperoleh untuk LAN8700IC-AEZG-TR.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LAN8700IC-AEZG-TR patut untuk 6 aplikasis: Industrial Embedded Controller, Networked Sensor Gateway, Building Automation Controller, Communications Equipment, Data Acquisition System, Networked Test and Measurement Instrument.

🏭

Industrial Embedded Controller

The LAN8700IC-AEZG-TR fits an industrial embedded controller that must add 10/100 Mbps Ethernet without implementing analog signaling directly. Its full MII and RMII support lets the design select the host interface that best matches the MCU, while the 3.3 V supply aligns with many embedded processors. The 36-pin QFN package limits board area while retaining separate digital and analog functions. The manufacturer identifies the family for industrial-temperature embedded Ethernet, and its ±15 kV ESD protection adds interface ruggedness. The reference clock must remain at 50 MHz ±50 ppm with a 40% to 60% duty cycle. A key design trade-off is that RMII saves host pins but demands tighter clock and signal-integrity control than a more conventional parallel interface.

🧩

Networked Sensor Gateway

A compact sensor gateway can use the LAN8700IC-AEZG-TR to convert a host processor’s digital data into a 10/100 Mbps Ethernet physical-layer signal. The one-channel PHY supports both 10 Mbps and 100 Mbps operation, making it suitable for management traffic or an embedded network segment that does not require Gigabit Ethernet. Its 6 mm × 6 mm QFN package helps preserve compactness in distributed sensing equipment. HP Auto-MDIX simplifies connection to both straight-through and crossover cabling. The implementation should keep the 50 MHz reference source within ±50 ppm and 40% to 60% duty cycle, and should isolate the analog network section from noisy digital or switching circuitry on the PCB.

🏭

Building Automation Controller

The LAN8700IC-AEZG-TR is suitable for building-automation controllers that communicate over 10/100 Ethernet while sharing a board with sensors, relays, and control logic. The MII interface provides a conventional parallel host path, whereas RMII provides a lower-pin-count option for space-constrained controller designs. A 3.3 V operating supply and a 36-pin surface-mount QFN align with current industrial control hardware. HP Auto-MDIX reduces cabling complexity, and the manufacturer’s industrial-temperature positioning supports equipment intended for harsh indoor environments. Layout remains critical: the Ethernet differential pairs should be routed as controlled-impedance nets, separated from switching nodes, and connected to the prescribed external magnetics network.

🌐

Communications Equipment

The LAN8700IC-AEZG-TR can provide wired Ethernet connectivity in communications equipment requiring 10/100 Mbps rather than Gigabit performance. Full MII support is useful when the host system already has a conventional parallel Ethernet interface, while RMII can simplify wiring between the PHY and a modern communications processor. The device’s 50 MHz reference clock is used as the network clock, helping simplify the transmit data path. At the same time, the clock source must meet ±50 ppm accuracy and a 40% to 60% duty cycle. The QFN package’s exposed pad requires proper thermal and electrical land-pattern implementation, while the analog Ethernet section requires careful isolation from high-current switching circuitry.

📺

Data Acquisition System

A compact data-acquisition system can use the LAN8700IC-AEZG-TR to transfer measurement and control data over a 10/100 Ethernet link. The PHY supports MII or RMII according to the selected host processor, allowing the same Ethernet approach to be reused across different embedded control boards. Its 3.3 V operation and small 6 mm × 6 mm QFN package are useful where analog measurement circuitry already consumes most available board area. HP Auto-MDIX simplifies installation by detecting cable polarity. For reliable data transfer, the design must provide clean clocking, isolate Ethernet pairs from sensitive analog inputs, and follow the manufacturer’s recommended stack-up and magnetics layout to minimize insertion loss and impedance discontinuities.

🔧

Networked Test and Measurement Instrument

The LAN8700IC-AEZG-TR is appropriate for test and measurement instruments that need a low-power Ethernet management or data port. The 10/100 Mbps interface is sufficient for supervisory traffic, configuration, logging, and moderate-rate measurement transfers. Because the device supports both MII and RMII, the instrument can reuse an existing host platform or simplify a new design. The industrial-temperature classification supports equipment deployed beyond consumer-office environments, while ±15 kV ESD protection strengthens the external network connection. Engineering teams should still budget for external magnetics and carefully controlled 100-ohm differential routing. The 50 MHz clock source and QFN exposed-pad layout must meet the manufacturer’s timing and thermal recommendations.

What is the LAN8700IC-AEZG-TR?
The LAN8700IC-AEZG-TR is a Microchip Technology single-channel 10/100 Mbps Ethernet PHY transceiver with full MII and RMII host interfaces. It operates from 3.3 V, supports HP Auto-MDIX, provides ±15 kV ESD protection, and uses a 36-pin 6 mm × 6 mm QFN package. According to the Microchip manufacturer datasheet, it is intended for low-power embedded Ethernet designs and includes flexPWR technology.
What are the key specifications of LAN8700IC-AEZG-TR that engineers should know?
The LAN8700IC-AEZG-TR supports 10 Mbps and 100 Mbps Ethernet on a 3.3 V supply and provides full MII and RMII host interfaces. Its 36-pin QFN package measures 6 mm × 6 mm, includes an exposed pad, and is supplied in tape-and-reel format. The manufacturer datasheet also identifies ±15 kV ESD protection, HP Auto-MDIX support, flexPWR technology, and a 50 MHz ±50 ppm reference clock with a 40% to 60% duty cycle.
Where can I download the LAN8700IC-AEZG-TR datasheet PDF?
The manufacturer’s LAN8700/LAN8700i datasheet PDF is available through the official Microchip Technology download link on this page. It describes the shared electrical characteristics, MII and RMII interfaces, reference-clock requirements, Auto-MDIX operation, flexPWR technology, and application information relevant to the LAN8700IC-AEZG-TR. Use the manufacturer datasheet’s pin-description table when assigning PCB nets.
Where can I find the LAN8700IC-AEZG-TR pinout?
The LAN8700IC-AEZG-TR pinout is defined in the manufacturer’s LAN8700/LAN8700i datasheet and corresponds to a 36-pin QFN package with an exposed pad. The device uses 3.3 V and supports full MII and RMII interfaces, so its mixed-signal and digital assignments should be copied directly into the schematic and layout. Use the datasheet’s pin-description table rather than inferring pins from a generic QFN drawing.
Does the LAN8700IC-AEZG-TR support both MII and RMII?
Yes, the LAN8700IC-AEZG-TR supports both full MII and RMII host interfaces. According to the Microchip manufacturer datasheet, the device supports 10/100 Mbps Ethernet operation and a 50 MHz ±50 ppm reference clock with a 40% to 60% duty cycle. RMII can reduce host-interface pin count, while full MII supports separate parallel control and data paths; the host processor must be configured for the selected interface.
What clock does the LAN8700IC-AEZG-TR require?
The LAN8700IC-AEZG-TR uses a 50 MHz reference clock with a tolerance of ±50 ppm and a duty cycle between 40% and 60%, inclusive. The manufacturer datasheet explains that this reference clock is also used as the network clock, allowing the transmit path to operate without additional buffering. Clock generation and distribution should therefore satisfy both frequency and duty-cycle limits.
What is the difference between MII and RMII for LAN8700IC-AEZG-TR?
MII and RMII are both supported by the LAN8700IC-AEZG-TR, but they provide different host-interface organizations. MII uses separate parallel control and data signals, while RMII consolidates control functions and uses fewer signal lines for a more compact embedded design. Both paths support the PHY’s 10 Mbps and 100 Mbps Ethernet operation, so the choice depends mainly on the host controller and board-level routing requirements.
Is LAN8700IC-AEZG-TR suitable for industrial embedded Ethernet?
The LAN8700IC-AEZG-TR is identified by Microchip Technology as a low-power industrial-temperature, variable-I/O-voltage analog interface IC. It provides 10/100 Mbps Ethernet, full MII and RMII, HP Auto-MDIX, and ±15 kV ESD protection in a surface-mount 36-pin QFN package. These characteristics suit embedded controllers, industrial communication modules, and connected equipment requiring compact Ethernet connectivity.
Where can I buy LAN8700IC-AEZG-TR online?
Use the Request a Quote form on this page to request LAN8700IC-AEZG-TR availability, current lead time, and order quantity. The part is ordered in tape-and-reel format and is identified as a 36-pin QFN Ethernet PHY. A direct quote keeps the request tied to the exact LAN8700IC-AEZG-TR ordering code rather than a related package or temperature variant.
What is the price of LAN8700IC-AEZG-TR?
Submit a Request a Quote form on this page for the current unit price and quantity breaks for LAN8700IC-AEZG-TR. The structured commercial data tracks prices for the exact ordering code, including the tape-and-reel suffix. A quotation is appropriate because availability and volume pricing can change by order quantity, date, and shipment requirements.
Is LAN8700IC-AEZG-TR in stock and what is its lead time?
Request current LAN8700IC-AEZG-TR stock status and lead time through the Request a Quote form on this page. The device is an active Microchip Technology Ethernet PHY offered in a 36-pin QFN tape-and-reel package. For production planning, include the required order quantity, shipment destination, and target assembly date so the quotation can reflect the appropriate schedule.
What can replace the LAN8700IC-AEZG-TR?
The closest package-compatible replacement is the LAN8700C-AEZG family, which uses a 36-pin QFN and provides a single-channel 10/100 Mbps Ethernet transceiver with MII and RMII support. However, a replacement should be checked for clocking, electrical timing, firmware, and power-management differences before it is approved. Use the Request a Quote form for the exact replacement MPN and current sourcing details.
What is the best cross-brand equivalent for LAN8700IC-AEZG-TR?
No cross-brand drop-in equivalent is established for the LAN8700IC-AEZG-TR because the device combines a 36-pin QFN footprint, full MII and RMII support, a specified 50 MHz clock, and vendor-specific power-management behavior. Any alternative that changes package pins, interface timing, clock requirements, or transceiver topology is not a drop-in replacement. Request a Quote for the exact Microchip part and validate a candidate against the manufacturer datasheet.
When should I choose LAN8700IC-AEZG-TR over a related Ethernet PHY?
Choose the LAN8700IC-AEZG-TR when the design needs a 3.3 V, single-channel 10/100 Mbps PHY with both MII and RMII, HP Auto-MDIX, ±15 kV ESD protection, and a 36-pin QFN footprint. Choose a related device only when its package, host-interface timing, clocking, regulatory constraints, and power architecture match the existing PCB. This part is particularly appropriate for embedded systems needing both MII and RMII flexibility.
Is LAN8700IC-AEZG-TR the same as LAN8700IC-AEZG?
The LAN8700IC-AEZG-TR and LAN8700IC-AEZG both identify the 36-pin QFN Ethernet PHY, but the -TR ordering suffix identifies tape-and-reel shipping. They are not interchangeable for automated pick-and-place assembly if the board requires a different physical carrier. For electronic design and pin compatibility, use the manufacturer datasheet; for production ordering, preserve the exact -TR suffix.

Data referensi kejuruteraan untuk LAN8700IC-AEZG-TR — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the LAN8700IC-AEZG-TR for a compact embedded design that needs one 10/100 Mbps Ethernet port, a 3.3 V supply, and either a full MII or reduced-pin RMII host interface. It is particularly appropriate when the PCB requires a 36-pin QFN land pattern, automated tape-and-reel assembly, HP Auto-MDIX, and ±15 kV ESD-protected network interfaces. Select LAN8700C-AEZG-AR2 when its specific ordering, qualification, and lifecycle conditions are preferable for the same platform, after checking its clock and power-management details. LAN8700C-AEZG is another same-family 36-pin QFN option, but its carrier format differs from the -TR target. Do not choose a different-pin-count Ethernet PHY as a drop-in solution. Regardless of the selected ordering code, verify host-interface timing, variable-I/O behavior, reference-clock quality, magnetics selection, exposed-pad assembly, and operating-temperature requirements against the manufacturer datasheet.

Perbandingan dengan Gantian

Parametr Produk Ini LAN8700C-AEZG-AR2 LAN8700C-AEZG
Package 36-pin QFN, 6 mm × 6 mm 36-pin QFN, 6 mm × 6 mm 36-pin QFN, 6 mm × 6 mm
Brand Microchip Technology Microchip Technology Microchip Technology
Ethernet Channel Count 1 channel 1 channel 1 channel
Supported Data Rates 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps
Supply Voltage 3.3 V 3.3 V 3.3 V
Host Interface Full MII and RMII Full MII and RMII Full MII and RMII
Mounting Type Surface mount Surface mount Surface mount

Penyeberangsung Jelas

  • Supports both full MII and RMII in one PHY (vsLAN8700C-AEZG-AR2)
  • Single-channel 10/100 Mbps Ethernet in a compact QFN (vsLAN8700C-AEZG)
  • Industrial-oriented interface with network protection (vsLAN8700C-AEZG-AR2)

Catatan Desain

Route the Ethernet transmit and receive pairs as controlled-impedance differential nets with continuous reference planes and avoid introducing stubs or layer transitions. Keep the PHY-to-magnetics section electrically compact, match the manufacturer’s recommended trace geometry, and separate these pairs from switching nodes, clocks, and high-current power paths. Since the PHY contains analog transceiver circuitry, uninterrupted return paths and a stable ground plane are important for reducing radiated emissions and susceptibility to ESD events.

Use the manufacturer’s recommended input, output, and bypass-capacitor arrangement directly from the datasheet application circuit. Place high-frequency decoupling close to the 3.3 V supply pins and provide a quiet return connection for the exposed pad. Do not assume that the analog Ethernet section and digital host interface have identical supply-current behavior; evaluate the host voltage range, startup sequence, and the flexPWR configuration against the complete system power architecture before releasing the layout.

The reference clock must be 50 MHz within ±50 ppm and have a duty cycle from 40% through 60%, inclusive. Because the LAN8700/LAN8700i family uses this reference as the network clock, excessive clock jitter, distortion, or noise can affect both MII and RMII timing. Source the clock from a low-noise oscillator, provide a short return path, avoid sharing long clock routes with unrelated signals, and validate rise time, jitter, and duty cycle at the PHY pin.

Do not substitute a 36-pin Ethernet PHY solely because the package count matches. Before approving a replacement, compare MII versus RMII availability, variable-I/O behavior, clock requirements, Auto-MDIX behavior, ESD rating, power architecture, exposed-pad implementation, and operating-temperature requirements. For LAN8700C-AEZG-AR2 and LAN8700C-AEZG, also verify the exact ordering suffix and assembly carrier so the production BOM and tape-and-reel process remain correct.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance declarations are not stated in the available product information. Industrial-temperature operation is identified for the LAN8700 family but does not by itself establish AEC-Q100 qualification.

Data disahkan pada: 2026-11-14 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

lan8700ic aezg lan8700ic datasheet smsc lan8700ic LAN8700IC-AEZG-TR datasheet LAN8700IC-AEZG-TR pinout LAN8700IC-AEZG-TR 36 QFN LAN8700IC-AEZG-TR MII RMII LAN8700IC-AEZG-TR equivalent LAN8700IC-AEZG-TR replacement LAN8700IC-AEZG-TR price LAN8700IC-AEZG-TR stock Microchip LAN8700IC-AEZG-TR LAN8700IC-AEZG-TR application circuit LAN8700IC-AEZG-TR vs LAN8700C-AEZG

Komponen dan Tanda berkaitan

Microchip Technology LAN8700IC-AEZG-TR LAN8700 LAN8700i LAN8700C-AEZG LAN8700C-AEZG-AR2 Ethernet PHY physical-layer transceiver 10/100BASE-T Ethernet Media Access Control MII RMII HP Auto-MDIX flexPWR 3.3 V 10 Mbps 100 Mbps ±15 kV ESD protection 50 MHz reference clock 36-pin QFN QFN family surface mount industrial temperature embedded Ethernet external Ethernet magnetics
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ