Lattice Semiconductor

LC4032ZC-5M56I - 400MHz 32-Macro-Cell CPLD | Lattice

MPN: LC4032ZC-5M56I ✓ Aktif
1.8 V Vdss 49 pins Package 400 MHz Speed
MOQ: 1 |

LC4032ZC-5M56I Ringkasan

Lattice Semiconductor LC4032ZC-5M56I is an in-system programmable SuperFast high-density complex programmable logic device with 32 macro cells, 32 user I/Os, and a 49-pin CABGA package. It supports 1.8 V, 2.5 V, and 3.3 V supply operation, reaches a maximum operating frequency of 400 MHz, and is listed with a 2.5 ns propagation delay. The device also provides 192 MHz internal frequency and up to four programmable global clock pins. These characteristics position it for deterministic control, interface, glue-logic, and signal-routing tasks where reconfigurable logic is preferable to a fixed application-specific integrated circuit.

A complex programmable logic device, or CPLD, is a programmable semiconductor in the FPGA and CPLD family. Unlike a mask-programmed logic device, a CPLD retains its programmed configuration in nonvolatile memory and can be reprogrammed during production, field updates, or in-system operation. Its architecture combines configurable logic blocks, programmable interconnect, input/output blocks, and global clock resources. This places it between simple fixed-logic devices and higher-capacity FPGAs in the broader programmable-logic hierarchy.

Key features include 32 macro cells, 32 user I/Os, a 400 MHz maximum operating frequency, and a 2.5 ns stated propagation delay. The listed 192 MHz internal frequency provides a separate performance reference for the device architecture. Operation from 1.8 V through 3.3 V gives designers flexibility across low-voltage system rails, while four global clock pins support distributed clocking and multi-domain control logic. In-system programmability also allows configuration updates without removing the device from its operating environment.

The combination of 32 macro cells and 32 user I/Os enables moderately complex control paths, bus arbitration, protocol bridging, state-machine implementation, and peripheral-interface logic. The 400 MHz headline frequency is relevant for timing-critical synchronous designs, although real system performance also depends on the selected architecture, external memory interface, input/output standards, clocking topology, and timing constraints used during implementation. The 2.5 ns propagation-delay figure should therefore be treated as a device-level reference rather than a guarantee for every routed path.

Typical applications include industrial control and factory automation, communications-interface logic, instrumentation, consumer equipment, embedded control, and general-purpose prototype or production-programming boards. The device is especially useful when a design requires nonvolatile configuration, modest logic density, numerous user I/Os, and rapid implementation changes without moving to a larger programmable-logic device.

PCB design should preserve the manufacturer's recommended power, ground, clock, and programmable-interface layout. Decoupling capacitors must be placed close to the appropriate supply pins, clock routes should remain short and controlled, and unused inputs should be assigned explicitly in the design tool. Programming-system compatibility, pin constraints, and the exact CABGA land pattern must be checked before the footprint is released for fabrication.

This product record combines the exact LC4032ZC-5M56I configuration, package and timing characteristics, sourced replacement information, application guidance, and design-focused selection criteria. It supports engineers comparing programmable-logic capacity, voltage options, clock resources, and board-level replacement decisions before beginning schematic capture.

Pilihan pengganti yang segera untuk LC4032ZC-5M56I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LC4032ZC-5M56I (sama faktor bentuk dan kaki) — berbeza dalam Global Clock Pins, Product Type.

Lattice Semiconductor
Global Clock Pins: Up to 4
Product Type: Complex programmable logic device (CPLD)
Bandingkan Dengan LC4032ZC-5M56I →

LC4032ZC-5MN56I

✅ Masuk Drop-In
📦 CABGA-49
Compared with LC4032ZC-5M56I, macro cells differ by 0, user I/Os by 0, internal frequency by 0 MHz, and listed propagation delay by 0 ns; suffix-specific device details still require verification.

📋 Alternatif rujukan (tidak dalam katalog)

LC4032ZC-5M56I Penilaian maksimum & Ciri-ciri Elektrik

Product Type Complex programmable logic device
Architecture SuperFast high-density PLD
Logic Family CMOS
Macro Cells 32 macro cells
Maximum Operating Frequency 400 MHz
Internal Frequency 192 MHz
Propagation Delay 2.5 ns
Listed Prop Delay 4.4 ns
User I/Os 32 pins
Total Package Pins 49 pins
Package Type CABGA-49
Tegangan Pemberi Arus 1.8 V
Supported Supply Voltages 1.8 V, 2.5 V, and 3.3 V
Global Clock Pins Up to 4 pins
Programmability In-system programmable
Mounting Technology Surface mount

Panduan Konfigurasi Pin LC4032ZC-5M56I cabga-49

Konfigurasi pin untuk LC4032ZC-5M56I (cabga-49 pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai cabga-49 untuk LC4032ZC-5M56I

Tiada data garisan pin yang diperoleh untuk LC4032ZC-5M56I.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LC4032ZC-5M56I patut untuk 6 aplikasis: Industrial Control Logic, Communications Interface Bridging, Instrumentation Signal Conditioning, Programmable Sensor Hub, Consumer and Communication Equipment, Embedded System Support Logic.

🏭

Industrial Control Logic

The LC4032ZC-5M56I fits compact machine-control logic where a fixed standard IC cannot accommodate product-specific sequencing. Its 32 macro cells and 32 user I/Os can implement state machines, interlocks, input conditioning, actuator-command logic, and diagnostic routines. The 400 MHz maximum operating frequency and 2.5 ns listed propagation delay provide ample timing headroom for many control paths. Its three supported supply levels—1.8 V, 2.5 V, and 3.3 V—also help align core logic, communications, and external interface sections within one programmable device. Engineers should still verify the exact temperature rating and use the manufacturer pin table when assigning control signals.

🌐

Communications Interface Bridging

The LC4032ZC-5M56I is appropriate for protocol conversion, framing, buffering, and interface arbitration between embedded systems. Thirty-two user I/Os provide connectivity for parallel data, control signals, and clock-domain crossing, while four global clock pins support distributed timing across independent functional blocks. The in-system-programmable architecture allows interface revisions to be handled through configuration changes rather than a new fixed-logic part. Its 32 macro cells are best suited to moderate protocol logic rather than high-bandwidth serial engines. Final timing closure should use the Lattice Semiconductor implementation tools and verify I/O voltage compatibility with every connected external device.

🔧

Instrumentation Signal Conditioning

The LC4032ZC-5M56I can implement acquisition sequencing, measurement timing, trigger handling, and sensor-interface control in compact instrumentation. Its 32 user I/Os support parallel sensor buses and control signals, while programmable global clocks help coordinate sampling and conversion events. The 400 MHz maximum operating frequency accommodates timing blocks that must respond deterministically to external events. Because measurement accuracy often depends on analog isolation, grounding, and reference design rather than digital speed alone, this CPLD should be placed as the timing and control element rather than as an analog front end. Confirm input thresholds, supply sequencing, and package-specific decoupling before layout release.

🧩

Programmable Sensor Hub

The LC4032ZC-5M56I suits a compact sensor hub that combines multiple digital sensors with host-side control logic. Thirty-two macro cells can support sensor configuration, interrupt arbitration, calibration sequences, timestamp handling, and communication framing, while 32 user I/Os permit direct attachment to several sensors and a host interface. The three listed supply voltages offer flexibility when the hub includes mixed-voltage peripherals, although each I/O bank limit must still be respected. In-system programmability simplifies product variants and field updates by retaining configuration in nonvolatile memory. Board-level planning should include defined programming access, pull resistors where required, and careful routing of clock and sensor signals.

📱

Consumer and Communication Equipment

The LC4032ZC-5M56I can consolidate product-specific control functions in communication or consumer equipment where board space is constrained. Its CABGA-49 package, 32 user I/Os, four global clock pins, and 32 macro cells provide a dense implementation target for status logic, key scanning, display sequencing, peripheral selection, and data-path adapters. The 400 MHz maximum operating frequency is suitable for synchronous control and moderate-width interfaces. Its in-system programmability also helps manage feature revisions, regional configuration differences, and production test requirements. Designers should use the manufacturer package drawing for land-pattern geometry and verify whether the specific ordering code supports the required industrial temperature range and supply sequencing.

🖥️

Embedded System Support Logic

The LC4032ZC-5M56I is useful as reconfigurable support logic around a microprocessor, microcontroller, or FPGA. The 32 macro cells can implement boot sequencing, peripheral chip-select logic, watchdog handling, interrupt combination, bus arbitration, and specialized timing adapters. A 2.5 ns listed propagation delay and four global clock pins support fast control paths, while the 400 MHz maximum operating frequency provides margin for synchronous interface logic. The device is especially practical when the support logic is expected to evolve more quickly than the main processor board. Engineers should define unused-pin behavior, programming-chain connectivity, and reset states explicitly in the Lattice Semiconductor design implementation.

What are the key specifications of LC4032ZC-5M56I that engineers should know?
The LC4032ZC-5M56I is a 32-macro-cell CPLD with 32 user I/Os, a 400 MHz maximum operating frequency, and a listed 2.5 ns propagation delay. According to the Lattice Semiconductor datasheet, it uses a 49-pin CABGA package, supports 1.8 V, 2.5 V, and 3.3 V supply voltages, and provides up to four global clock pins. The device is also identified as an in-system-programmable SuperFast high-density PLD.
What is LC4032ZC-5M56I and what is a CPLD?
The LC4032ZC-5M56I is an in-system-programmable complex programmable logic device from Lattice Semiconductor. A CPLD combines configurable logic, programmable interconnect, user I/Os, and global clock resources in a nonvolatile programmable-logic device. According to the Lattice Semiconductor product documentation, the LC4032ZC contains 32 macro cells and is intended for compact control, interface, and signal-routing logic that benefits from reconfigurable design support.
What is the operating voltage of LC4032ZC-5M56I?
The LC4032ZC-5M56I supports operation at 1.8 V, 2.5 V, and 3.3 V. The Lattice Semiconductor datasheet identifies 1.8 V as the listed supply voltage for this ordering code and describes support for 1.8 V, 2.5 V, and 3.3 V operating conditions. External I/O standards, interface voltage levels, and device configuration requirements should still be checked against the selected board architecture.
How many I/O pins and macro cells does LC4032ZC-5M56I have?
The LC4032ZC-5M56I has 32 user I/O pins and 32 macro cells in a 49-pin CABGA package. The Lattice Semiconductor datasheet summary lists 32 user I/Os and identifies the device as part of the 4000Z CPLD family. The remaining package positions support power, configuration, clocking, and other device functions rather than general-purpose user I/O.
What is the maximum operating frequency of LC4032ZC-5M56I?
The LC4032ZC-5M56I has a maximum operating frequency of 400 MHz, while its listed internal frequency is 192 MHz. According to the Lattice Semiconductor datasheet, the headline fMAX is the maximum operating-frequency reference, whereas the internal-frequency value describes another architectural timing parameter. Actual routed-path performance depends on logic assignment, clock topology, I/O constraints, and the selected implementation.
Where can I download the LC4032ZC-5M56I datasheet PDF?
The LC4032ZC-5M56I datasheet PDF is accessible through the product-documentation link on this page and through the linked datasheet record. The manufacturer documentation defines the 32 macro cells, 32 user I/Os, supply options, global clock resources, package information, and electrical characteristics. Use the Lattice Semiconductor datasheet and pin table when assigning package pins, programming the device, and laying out the PCB.
Where can I find the LC4032ZC-5M56I pinout?
The LC4032ZC-5M56I pin assignments should be taken from the pinout and pin-description tables in the Lattice Semiconductor datasheet for the 49-pin CABGA package. The available product listing confirms 49 package pins, 32 of which are user I/Os, but it does not provide a reliable numbered pin table. Use the manufacturer's package drawing and device pin table to assign configuration pins, clock pins, supplies, grounds, and user I/Os.
Is LC4032ZC-5M56I suitable for industrial control and automation?
The LC4032ZC-5M56I is suitable for many compact industrial-control and automation functions when its voltage, timing, temperature, and qualification ratings meet the system requirements. Its 32 macro cells, 32 user I/Os, four global clock pins, and 400 MHz maximum operating frequency support control state machines, interface logic, and deterministic signal routing. Confirm the exact temperature grade and automotive or industrial qualification requirements before production release.
LC4032ZC-5M56I vs LC4032ZC-5MN56I — which one should I use?
LC4032ZC-5MN56I is the closest listed same-brand drop-in candidate for LC4032ZC-5M56I because both are described with 32 macro cells, 32 user I/Os, 192 MHz internal frequency, 2.5 ns propagation delay, and 4.4 ns listed propagation delay in CABGA-49 packages. The visible technical differences are 0 MHz in maximum operating frequency, 0 macro cells, 0 user I/Os, and 0 ns in the listed propagation-delay values. Confirm device revision and programming compatibility before substitution.
When should I choose LC4032ZC-5M56I over LC4032ZC-5MN56I?
Choose LC4032ZC-5M56I when its exact ordering code is already qualified in your BOM, design files, or supply chain; the closest listed alternative has the same 32-macro-cell capacity, 32 user I/Os, 1.8 V supply listing, 192 MHz internal frequency, and 2.5 ns propagation-delay value. Select LC4032ZC-5MN56I only after checking its suffix-specific temperature, qualification, and configuration details. Both candidates are listed in the same CABGA-49 package family.
What can replace LC4032ZC-5M56I?
LC4032ZC-5MN56I is the closest supported drop-in replacement candidate in the available cross-reference information. It uses the same listed CABGA-49 package and matches the target on 32 macro cells, 32 user I/Os, 192 MHz internal frequency, 2.5 ns propagation delay, and 4.4 ns listed propagation delay. The measurable differences are 0 MHz, 0 macro cells, 0 user I/Os, and 0 ns for those compared parameters.
Is LC4032ZC-5M56I the same as LC4032ZC-5MN56I?
The two devices are closely matched but should not be treated as identical solely from the technical summaries. LC4032ZC-5M56I and LC4032ZC-5MN56I are both listed as 32-macro-cell, 32-user-I/O CPLDs in CABGA-49 packages with a 400 MHz maximum operating frequency and 2.5 ns propagation delay. The ordering suffixes can encode device-specific operating or qualification information, so verify the full suffix in the manufacturer documentation before marking them interchangeable.
What is the best Lattice Semiconductor equivalent for LC4032ZC-5M56I?
LC4032ZC-5MN56I is the best-supported Lattice Semiconductor equivalent among the candidates identified for LC4032ZC-5M56I because it matches the listed CABGA-49 package, 32 macro cells, 32 user I/Os, 192 MHz internal frequency, and 2.5 ns propagation delay. No cross-brand substitute was identified with sufficient package, pinout, and timing information to qualify as a drop-in replacement. Validate programming files, device revision, temperature grade, and lifecycle requirements before production use.
Where to buy LC4032ZC-5M56I online?
Use the Request a Quote form on this page to request LC4032ZC-5M56I availability, lot handling, and order processing. The exact MPN is cataloged as a 49-pin CABGA CPLD with 32 macro cells and 32 user I/Os. Provide the required quantity, target date, approved-source status, and shipment destination with the request so procurement can confirm the appropriate packaging and delivery commitment.
What is the price and lead time of LC4032ZC-5M56I?
The current unit price and committed lead time for LC4032ZC-5M56I should be obtained through the Request a Quote form on this page. Quote requests should specify quantity, date code requirements, target delivery date, and whether unused or recovered inventory is acceptable. The part is identified as a 49-pin CABGA CPLD with 32 macro cells and supports 1.8 V, 2.5 V, and 3.3 V operation.
Is LC4032ZC-5M56I in stock?
Stock status for LC4032ZC-5M56I should be confirmed through the Request a Quote form on this page because inventory changes with order quantity and procurement timing. Include the required quantity, date-code preference, target delivery date, and approved-vendor requirements in the request. The component is a 49-pin CABGA in-system-programmable CPLD with 32 macro cells and 32 user I/Os.

Data referensi kejuruteraan untuk LC4032ZC-5M56I — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LC4032ZC-5M56I when the exact ordering code is already approved in the design, qualification records, or supply plan. It provides 32 macro cells, 32 user I/Os, 400 MHz maximum operating frequency, and three listed supply-voltage options in a CABGA-49 package. LC4032ZC-5MN56I is the closest listed drop-in candidate because its package and principal capacity and timing values match exactly in the available specifications. Use it when the suffix-specific device data confirms the required temperature grade, qualification, programming support, and lifecycle status. No alternative should replace the target without checking the complete manufacturer pin table, configuration compatibility, PCB footprint, supply sequencing, and asynchronous I/O behavior. For a new design, evaluate whether 32 macro cells are sufficient before committing to the 49-pin CABGA footprint and its assembly requirements.

Perbandingan dengan Gantian

Parametr Produk Ini LC4032ZC-5MN56I
Package CABGA-49 CABGA-49
Brand Lattice Semiconductor Lattice Semiconductor
Macro Cells 32 macro cells 32 macro cells
User I/Os 32 pins 32 pins
Maximum Operating Frequency 400 MHz 400 MHz
Internal Frequency 192 MHz 192 MHz
Propagation Delay 2.5 ns 2.5 ns
Listed Prop Delay 4.4 ns 4.4 ns
Supply Voltage 1.8 V 1.8 V
Supported Supply Voltages 1.8 V, 2.5 V, and 3.3 V 1.8 V, 2.5 V, and 3.3 V
Global Clock Pins Up to 4 pins Up to 4 pins
Programmability In-system programmable In-system programmable

Penyeberangsung Jelas

  • Exact 32-macro-cell configuration with 32 user I/Os (vsLC4032ZC-5MN56I)
  • Full 400 MHz maximum operating-frequency match (vsLC4032ZC-5MN56I)
  • Matching core timing characteristics (vsLC4032ZC-5MN56I)
  • Three listed supply-voltage options (vsLC4032ZC-5MN56I)

Catatan Desain

Use the manufacturer CABGA-49 package drawing and pin table to construct the PCB footprint, including ball assignments, pad dimensions, solder-mask definition, and paste apertures. Place supply decoupling capacitors adjacent to their associated power balls, provide a low-impedance ground return, and avoid routing configuration signals through areas with switching or high-current outputs. Because the device is only 49 pins and uses a dense CABGA package, assembly capability and inspection requirements should be confirmed before fabrication.

Route clocks as short, continuous paths with controlled return references and avoid stubs, test pads, and unnecessary layer transitions. The device supports up to four global clock pins and a maximum operating frequency of 400 MHz, so clock distribution and source synchronization require disciplined PCB layout. Match external interface timing to the selected I/O standard and include series damping where source-edge ringing or destination overshoot is observed. Final timing constraints should be implemented and checked in the Lattice Semiconductor design tool.

Do not infer that every LC4032ZC suffix has identical temperature, qualification, or device-revision characteristics. Before replacing LC4032ZC-5M56I with LC4032ZC-5MN56I, compare the complete suffix in the manufacturer documentation, confirm configuration-file compatibility, and review the programming interface requirements. Also assign every unused input explicitly, maintain the required power-up and programming conditions, and verify that external I/O voltages do not exceed the selected I/O bank's limits.

Plan the 1.8 V, 2.5 V, or 3.3 V rail according to the device configuration and board architecture, then verify startup sequencing for all connected devices. Place stable decoupling at the supply and ground balls and keep supply traces short to reduce impedance. Configuration pins must not be left without defined levels when required by the design. Power-supply capacity should include normal operating consumption plus the transient demand of logic transitions and any attached peripherals.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for this exact ordering code.

Data disahkan pada: 2026-11-14 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

LC4032ZC-5M56I datasheet LC4032ZC-5M56I pinout LC4032ZC-5M56I datasheet pdf LC4032ZC-5M56I specifications LC4032ZC-5M56I equivalent LC4032ZC-5M56I replacement LC4032ZC-5M56I cross reference LC4032ZC-5M56I footprint LC4032ZC-5M56I price LC4032ZC-5M56I stock Lattice LC4032ZC-5M56I LC4032ZC CABGA-49 pinout LC4032ZC-5M56I vs LC4032ZC-5MN56I LC4032ZC-5M56I application circuit

Komponen dan Tanda berkaitan

Lattice Semiconductor LC4032ZC-5M56I LC4032ZC-5MN56I LC4032ZC complex programmable logic device CPLD FPGA programmable logic SuperFast high-density PLD ispMACH 4000Z 32 macro cells 32 user I/Os 400 MHz 192 MHz internal frequency 2.5 ns propagation delay 1.8 V 2.5 V 3.3 V CABGA-49 surface mount in-system programming global clock industrial control communications interface instrumentation
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ