Texas Instruments

LM224ADRG4 - Quad 30V 1.2MHz Op Amp | Texas Instruments

MPN: LM224ADRG4 ✓ Aktif
3 mV Vdss 14-pin SOIC (D) Package Internally compensated Speed
MOQ: 1 |

LM224ADRG4 Ringkasan

The Texas Instruments LM224ADRG4 is a general-purpose quadruple operational amplifier with four amplifier circuits, a 1.2 MHz gain-bandwidth product, a 3 mV typical input offset voltage, and operation across a -25°C to 85°C temperature range. The device is supplied in a 14-pin SOIC (D) package for surface-mount assembly.

A general-purpose operational amplifier is an analog signal-conditioning IC used to amplify voltage differences, buffer sensor outputs, or implement feedback-controlled analog circuits. In the hierarchy of electronic components, an operational amplifier belongs to the amplifier IC class, the larger analog and mixed-signal IC category, and ultimately the semiconductor family. Its internal gain is frequency dependent, so closed-loop bandwidth depends on the selected feedback network and noise gain.

The LM224A family provides four amplifiers in one package, allowing a compact PCB design to implement several independent analog functions. Its 1.2 MHz gain-bandwidth product supports general-purpose signal processing rather than high-speed precision instrumentation. The specified 3 mV input offset voltage is important when signals are small or when multiple stages must operate with controlled dc error. A 30 V maximum supply rating and ±16 V or 32 V operating supply descriptions cover conventional industrial supply environments.

Each amplifier is internally frequency compensated, simplifying implementation of standard inverting, non-inverting, summing, and comparator-style signal-processing arrangements. The package pinout follows the conventional quad operational-amplifier arrangement, with power, ground, four differential inputs, and four outputs. Because input offset, bias current, common-mode range, output swing, supply current, and noise are not stated in the product listing excerpts, consult the manufacturer datasheet before finalizing precision biasing, output-swing, or stability calculations.

Typical uses include industrial control and instrumentation, four-channel sensor conditioning, audio preamplification, power-supply feedback, sample-and-hold support circuits, and general mixed-signal interfaces. The four independent channels make the device especially useful when a design needs several similar low-frequency analog stages without allocating separate single-amplifier packages.

For a new layout, route each input and output according to the manufacturer pin-description table, place input and output decoupling capacitors close to the supply pins, and verify stability with the intended feedback network and load. This page combines ordering information, verified device characteristics, drop-in family alternatives, comparison details, and practical implementation guidance for faster component selection and PCB planning.

Pilihan pengganti yang segera untuk LM224ADRG4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LM224ADRG4 (sama faktor bentuk dan kaki) — berbeza dalam Mounting Type.

Texas Instruments
Mounting Type: Surface-mount SOIC
Bandingkan Dengan LM224ADRG4 →
Texas Instruments
Mounting Type: Surface-mount SOIC
Bandingkan Dengan LM224ADRG4 →

LM224ADR

✅ Masuk Drop-In
Texas Instruments
📦 14-SOIC (D)
Quad general-purpose operational amplifier · 4 circuits · Four independent high-gain, frequency-compensated amplifiers · 1.2 MHz · 0.5 V/µs · 3 mV · 30 V · ±1.5 V to ±16 V

Hubungi untuk harga

Lihat Datasheet →

LM224DRG4

✅ Masuk Drop-In
📦 14-SOIC (D)
Wider-temperature LM224 family ordering option versus the LM224ADRG4 -25°C to 85°C range; core 30 V and 1.2 MHz family ratings remain applicable

📋 Alternatif rujukan (tidak dalam katalog)

LM224ADRG4 Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type General-purpose operational amplifier
Number of Circuits 4 circuits
Gain-Bandwidth Product 1.2 MHz
Typical Input Offset Voltage 3 mV
Maximum Supply Voltage 30 V
Tegangan Pemberi Arus Operasi ±16 V or 32 V
Gambaran Suhu Operasi -25°C to 85°C
Package Type 14-pin SOIC (D)
Bilangan Pin 14 pins
Jenis Pemasangan Surface mount
Frequency Compensation Internally compensated

Panduan Konfigurasi Pin LM224ADRG4 14-pin soic (d)

Konfigurasi pin untuk LM224ADRG4 (14-pin soic (d) pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 14-pin soic (d) untuk LM224ADRG4

Tiada data garisan pin yang diperoleh untuk LM224ADRG4.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LM224ADRG4 patut untuk 6 aplikasis: Industrial Sensor Conditioning, Audio Preamplification, Power-Supply Feedback Monitoring, Data Acquisition Front End, Control-System Signal Conditioning, Portable Measurement Module.

🏭

Industrial Sensor Conditioning

The LM224ADRG4 is appropriate for multichannel industrial sensor conditioning because it combines four internally compensated amplifiers with a 1.2 MHz gain-bandwidth product in one 14-pin SOIC. Separate channels can amplify, invert, sum, or buffer low-bandwidth transducer signals without requiring four single-amplifier packages. Its -25°C to 85°C operating range suits equipment operating above typical room temperature, provided the complete enclosure stays within that limit. Before committing to a gain network, check sensor impedance, input common-mode voltage, output swing, and the application-specific offset error. The listed 3 mV typical input offset can be significant when the sensor produces only millivolts, so use the manufacturer electrical tables to select practical resistor values and assess calibration requirements.

🎧

Audio Preamplification

The LM224ADRG4 can provide four low-frequency preamplifier or buffer stages for audio-oriented analog subsystems. Its 1.2 MHz gain-bandwidth product is much faster than the bandwidth generally needed for baseband audio, while the four-channel 14-pin SOIC arrangement helps reduce board area in line-level preamplifier, mixer, or headphone-driver input networks. Use each channel independently for low-impedance source buffering or non-inverting amplification, and verify the output-current capability against the next stage. The 3 mV typical input offset is generally less important for audio signals than for precision sensors but should be included in minimum-signal calculations. Confirm input bias current, output swing, noise, and load stability from the manufacturer datasheet.

⚡

Power-Supply Feedback Monitoring

The LM224ADRG4 can monitor and condition feedback signals in industrial or communications power-conversion systems where multiple analog channels are useful. Its four internally compensated amplifiers allow separate functions such as error-amplifier support, output-voltage sensing, current-shunt amplification, and fault-signal conditioning. The 30 V maximum supply rating supports conventional high-voltage analog rails, although the actual circuit must respect the complete input, output, and absolute-maximum limits. Keep sensing paths short, use Kelvin routing where shunt resistance is low, and account for the 3 mV typical input offset when determining the smallest detectable supply error. The 1.2 MHz gain-bandwidth product is suitable for control-loop and monitoring paths whose bandwidth is far below the amplifier limit.

🖥️

Data Acquisition Front End

The LM224ADRG4 is useful in a low-speed data-acquisition front end when four channels must amplify or buffer inputs before conversion. Its 1.2 MHz gain-bandwidth product can support signal paths well below the conversion rate, and the 14-pin SOIC package reduces the component count compared with four separate amplifier packages. Common uses include buffer amplifiers for sensor outputs, differential-to-single-ended stages, and programmable-gain building blocks using passive networks. Evaluate source impedance and amplifier bias current for high-impedance sensors, and verify that the 3 mV typical offset fits the acquisition resolution. The -25°C to 85°C range covers many industrial environments, but enclosure heating can reduce the allowable board temperature margin.

🔧

Control-System Signal Conditioning

The LM224ADRG4 fits control and monitoring boards that need several general-purpose analog channels at modest bandwidth. The device can condition command signals, scale sensor feedback, generate error signals, and buffer outputs within one package. Its 1.2 MHz gain-bandwidth product provides ample bandwidth for common industrial control loops, while internal frequency compensation simplifies the design of standard unity-gain voltage followers and closed-loop amplifiers. Check the output-load and slew-rate requirements for actuator interfaces, and account for the 3 mV typical input offset when determining control accuracy. Confirm that each analog signal remains within the manufacturer input common-mode range and that the 30 V maximum supply is never exceeded under fault conditions.

📱

Portable Measurement Module

The LM224ADRG4 can support a compact battery-powered measurement module when four low-bandwidth analog functions must be handled within a limited board area. It may provide input buffering, gain stages, active filtering, or output isolation for a sensor cluster in a portable instrument. The 1.2 MHz gain-bandwidth product allows useful bandwidth for many slow physical measurements, but battery designs must still evaluate supply current and the amplifier's quiescent consumption from the manufacturer data. The 3 mV typical input offset may require offset correction for high-resolution measurements. The 14-pin SOIC package is easy to route in conventional PCB designs, and the -25°C to 85°C range covers many mobile and field-service operating environments.

What is the operating voltage range of LM224ADRG4?
The LM224ADRG4 supports a 30 V maximum supply rating and is described for operation at ±16 V or 32 V total supply voltage. Texas Instruments identifies the device as a high-voltage operational amplifier in its LM224A family documentation. The exact minimum and maximum common-mode input and output-swing limits must be taken from the manufacturer datasheet when designing the analog signal path. Use a supply that remains within the absolute maximum ratings, and include local bypass capacitance at the power pins.
What are the key specifications of LM224ADRG4 that engineers should know?
The LM224ADRG4 combines four general-purpose operational amplifiers in a 14-pin SOIC package. Key characteristics include a 1.2 MHz gain-bandwidth product, 3 mV typical input offset voltage, a 30 V maximum supply rating, and an operating temperature range of -25°C to 85°C. According to the Texas Instruments product description, the device is internally frequency compensated. These figures position it as a general-purpose, medium-speed amplifier for industrial control, instrumentation, buffering, and conventional analog signal conditioning.
Is LM224ADRG4 the same as LM224ADR?
The LM224ADRG4 and LM224ADR identify closely related orderable versions in the Texas Instruments LM224A family and use the same 14-pin SOIC (D) footprint. LM224ADRG4 is the exact tape-and-reel ordering designation, while LM224ADR uses a shorter ordering code for the same device family. The explicit product listing confirms the 14-SOIC construction, and the published device description confirms the 1.2 MHz bandwidth and -25°C to 85°C range. Verify the orderable drawing before assigning either MPN in production documentation.
LM224ADRG4 vs LM224DRG4 - which is better for industrial use?
LM224DRG4 is the better choice when the design must operate beyond the LM224ADRG4 temperature range. The LM224ADRG4 is specified from -25°C to 85°C, while Texas Instruments presents the LM224DRG4 as part of the wider-temperature LM224 family. Both use a 14-pin SOIC package and share the family's general-purpose amplifier architecture. For room-temperature equipment, LM224ADRG4 is appropriate; for exposed industrial temperatures, confirm the LM224DRG4 limits against the manufacturer datasheet.
When should I choose LM224ADRG4 over LM324ADR2G?
Choose LM224ADRG4 when the required temperature range extends to 85°C and the application benefits from the LM224A family's specified 3 mV typical input offset voltage and 1.2 MHz gain-bandwidth product. LM324ADR2G is a related but distinct amplifier family, and its dc offset and operating-temperature characteristics should be checked before substitution. LM224ADRG4 is preferable for general industrial signal conditioning where its published -25°C to 85°C rating is sufficient and its 14-pin SOIC package matches the board layout.
What is the best drop-in replacement for LM224ADRG4?
The closest confirmed drop-in choices are LM224ADR and LM224DRG4 because both are specified in the Texas Instruments LM224A family and use the 14-pin SOIC (D) package. LM224ADR maintains the same family ordering configuration, while LM224DRG4 provides the wider-temperature family option. Drop-in status depends on matching the exact pin functions, supply limits, offset behavior, temperature requirements, and stability requirements in the manufacturer documentation. Do not substitute solely because two devices share a 14-pin package.
Where can I download the LM224ADRG4 datasheet PDF?
The LM224ADRG4 datasheet is available through the Texas Instruments LM224 product page at https://www.ti.com/product/LM224. The dedicated ordering page identifies LM224ADRG4 as the 14-pin SOIC version of the LM224A family. Use the manufacturer document to verify the pin-description table, absolute maximum ratings, electrical characteristics, typical application circuits, and package drawing. The manufacturer product page is the preferred starting point because it links the current device documentation and ordering variants.
Where can I find the LM224ADRG4 pinout?
The LM224ADRG4 pinout is found in the pin-configuration and pin-description sections of the Texas Instruments LM224 datasheet. The device has 14 pins in the D-package SOIC and contains four operational amplifiers. Use the manufacturer pin table to assign supply, ground, input, and output connections because the generic SOIC outline alone does not identify the amplifier channels. Also confirm the exposed thermal information and recommended land pattern before routing the PCB.
Where to buy LM224ADRG4 online?
Use the Request a Quote form on this page to request LM224ADRG4 availability, quantity breaks, and delivery information. The part is listed by Texas Instruments as an active family member with the exact ordering code LM224ADRG4, a 14-pin SOIC package, and a -25°C to 85°C operating range. The quote form is the appropriate channel for current commercial confirmation because stock and commercial terms can change independently of the device's lifecycle status.
What is the price of LM224ADRG4?
Submit the LM224ADRG4 request through the Request a Quote form on this page to obtain the current unit price and relevant quantity tiers. Commercial pricing for this exact tape-and-reel ordering code depends on quantity, market conditions, and supplier confirmation, so a static figure can become stale. The form also allows buyers to request production quantities, lead time, and delivery details for the 14-pin SOIC device without relying on a generic family-level price.
What is the lead time for LM224ADRG4?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with order quantity, procurement status, and the manufacturer's allocation position, even when the LM224ADRG4 is described as an active device. For planning purposes, identify the exact 14-pin SOIC tape-and-reel ordering code and required quantity in the request. Do not base a production schedule on a catalog quantity shown for another member of the LM224 family.
Is LM224ADRG4 in stock?
Current LM224ADRG4 stock should be confirmed through the Request a Quote form on this page. The manufacturer lists the LM224A device and its LM224ADRG4 ordering code as active, but lifecycle status does not by itself guarantee inventory for a specific package, reel quantity, or shipment date. Include the required order quantity and target delivery schedule in the quote request so the supplier can confirm both availability and timing.
What can replace LM224ADRG4?
LM224ADR and LM224DRG4 are the confirmed same-package alternatives in this product family. LM224ADR retains the LM224A device identity in a 14-pin SOIC configuration, while LM224DRG4 is the wider-temperature family option. Both should be reviewed against the manufacturer datasheet for electrical limits and temperature coverage. A defensible drop-in replacement must preserve the amplifier-channel pinout and satisfy the original circuit’s offset, common-mode, output-swing, supply, and stability requirements.
Is LM224ADRG4 suitable for sensor-conditioning and industrial control?
The LM224ADRG4 is suitable for many general-purpose sensor-conditioning and industrial-control circuits operating within -25°C to 85°C. Its four internally compensated channels provide a practical way to combine amplification, inversion, summing, and buffering functions in one 14-pin SOIC. The 1.2 MHz gain-bandwidth product is appropriate for low-to-moderate-bandwidth signals. Validate sensor-source impedance, common-mode voltage, output loading, noise requirements, and closed-loop stability in the final circuit.
What is an Analog Devices equivalent for LM224ADRG4?
The available cross-reference material identifies Analog Devices as a manufacturer of a compatible LM224 alternative, but it does not expose a specific Analog Devices orderable MPN or package mapping. A named drop-in part should therefore not be assigned without reviewing the relevant manufacturer pinout and electrical tables. If exact sourcing is required, use the Request a Quote form for LM224ADRG4 or request the candidate Analog Devices MPN from a qualified engineering contact for formal cross-reference review.

Data referensi kejuruteraan untuk LM224ADRG4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LM224ADRG4 when a design needs four general-purpose amplifier channels in a 14-pin SOIC and its -25°C to 85°C operating range covers the product environment. Select LM224ADR when its shorter ordering code matches the approved manufacturer part number for the same LM224A-family configuration. Select LM224DRG4 instead when the system requires the wider-temperature LM224 family option. Neither part should be treated as a generic quad-op-amp substitution without checking the exact pinout and electrical characteristics. For designs requiring substantially lower offset, lower noise, rail-to-rail input or output operation, faster slew, or different supply-current behavior, evaluate a precision amplifier rather than assuming drop-in compatibility. The LM224ADRG4 is best suited to conventional low-bandwidth industrial control, buffering, summing, sensor-conditioning, and general mixed-signal circuits where its published 1.2 MHz bandwidth and 3 mV typical offset meet the system requirements.

Perbandingan dengan Gantian

Parametr Produk Ini LM224ADR LM224DRG4
Package 14-SOIC (D) 14-SOIC (D) 14-SOIC (D)
Brand Texas Instruments Texas Instruments Texas Instruments
Number of Amplifiers 4 circuits 4 circuits 4 circuits
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz
Maximum Supply Voltage 30 V 30 V 30 V
Typical Input Offset Voltage 3 mV 3 mV 3 mV
Frequency Compensation Internally compensated Internally compensated Internally compensated
Operating Supply Voltage ±16 V or 32 V ±16 V or 32 V ±16 V or 32 V
Orderable Configuration LM224ADRG4 tape-and-reel code LM224ADR shortened ordering code Wider-temperature family ordering code

Penyeberangsung Jelas

  • Four general-purpose amplifiers in one package (vsLM224ADR)
  • Identified industrial temperature coverage (vsLM224DRG4)
  • General-purpose 1.2 MHz performance with 3 mV typical offset (vsLM324ADR2G)

Catatan Desain

Use the manufacturer pin-description table to route the four amplifier channels and the common power connections. Place the supply bypass capacitor immediately between the supply and ground pins, with a short ground return and minimal loop area. Although the LM224ADRG4 uses a conventional 14-pin SOIC, incorrect channel assignment or bypass placement can introduce instability or amplify switching noise. Keep sensitive input and feedback traces away from inductor, relay, and power-converter nodes.

Do not assume that every 14-pin quad op amp is interchangeable with the LM224ADRG4. Confirm channel pinout, input common-mode range, output swing, supply-current behavior, offset limits, and stability with the intended load. The published 3 mV typical input offset can create meaningful error in millivolt-level sensor circuits. Also verify that the -25°C to 85°C LM224ADRG4 temperature rating covers the hottest expected board temperature rather than only the nominal ambient specification.

The 1.2 MHz gain-bandwidth product makes the LM224ADRG4 suitable for many low-bandwidth closed-loop stages, but noise gain and feedback impedance still determine usable bandwidth. Avoid extremely high source or feedback impedances when accurate dc behavior is required, because bias current and offset effects become more significant. For sensor lines, use guarded routing and a nearby buffer, and test the completed amplifier with the expected cable capacitance and load rather than an ideal simulator load.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The product listing excerpts do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. LM224ADRG4 is a general-purpose commercial amplifier rather than an automotive-qualified AEC-Q100 device.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

LM224ADRG4 datasheet LM224ADRG4 pinout LM224ADRG4 datasheet pdf LM224ADRG4 equivalent LM224ADRG4 replacement LM224ADRG4 vs LM224ADR LM224ADRG4 vs LM224DRG4 LM224ADRG4 price LM224ADRG4 stock Texas Instruments LM224ADRG4 LM224ADRG4 14-SOIC pinout LM224ADRG4 sensor conditioning application

Komponen dan Tanda berkaitan

Texas Instruments LM224ADRG4 LM224ADR LM224DRG4 LM324ADR2G Operational amplifier General-purpose amplifier Quad operational amplifier Analog IC Semiconductor Gain-bandwidth product Input offset voltage Frequency compensation Common-mode input voltage Output voltage swing 14-SOIC SOIC family Surface mount SMD Industrial control Sensor conditioning Audio preamplification Power-supply feedback monitoring Data acquisition front end
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ