onsemi

LM224DTBR2 - Quad 3-32V Op Amp | onsemi | Industrial

MPN: LM224DTBR2 ✓ Aktif
3 V to 32 V Vdss 14-pin TSSOP Package
MOQ: 1 |

LM224DTBR2 Ringkasan

The onsemi LM224DTBR2 is a general-purpose, four-circuit operational amplifier designed for single-supply operation from 3 V to 32 V and supplied in a 14-pin TSSOP package. It provides four independent amplifier channels, true differential inputs, and a common ground arrangement suited to general-purpose analog signal conditioning. The device combines straightforward implementation with a broad supply range, making it useful in industrial controls, sensor interfaces, audio paths, and low-cost instrumentation.

An operational amplifier, commonly abbreviated op amp, is a voltage-controlled differential amplifier. Its inverting and non-inverting inputs allow a circuit to amplify or attenuate a signal while establishing feedback-defined gain. Within the broader semiconductor hierarchy, the LM224DTBR2 belongs to the linear amplifier family, which sits within analog integrated circuits used for instrumentation, buffering, amplification, and signal conversion. The four channels also allow several analog functions to be implemented in one compact package.

Key characteristics include a 3 V to 32 V operating supply, four amplifier circuits, true differential input capability, and a 14-pin TSSOP surface-mount package. The wide supply range allows the same device to operate from low-voltage analog systems through higher industrial rails. Its four-channel architecture reduces the number of packages required when an application needs multiple independent gain stages, although the common device supply and ground must still support every channel's operating requirements.

The LM224 series is intended for general-purpose applications rather than precision instrumentation or high-speed signal processing. Its internal architecture supports common amplifier configurations, including non-inverting, inverting, voltage follower, summing, and difference stages. Designers should account for input common-mode limits, output swing, bias current, noise, and stability requirements when selecting external resistor and capacitor values. Operating from a single supply is particularly convenient in systems that do not provide a negative analog rail.

Typical uses include conditioning sensors, buffering inputs to analog-to-digital converters, amplifying low-level control signals, implementing simple filters, and providing multiple analog channels in industrial or embedded equipment. It can also participate in audio preamplifier and mixer circuits when the required bandwidth, output swing, and distortion meet the application. Four amplifiers in one package are particularly helpful where board area is limited and several independent analog functions are required.

PCB design should provide a short return path to the ground pin and place decoupling capacitance close to the supply connection. Because all four channels share package-level supply pins, high-current output stages and sensitive input stages may require careful partitioning to prevent supply disturbance from appearing as signal noise. Stable operation also depends on suitable feedback networks and adherence to the layout and compensation guidance in the manufacturer datasheet.

This page combines the LM224DTBR2 ordering information with practical guidance on package compatibility, replacement decisions, analog layout, and application selection. It is intended to help engineers determine whether the four-channel, single-supply amplifier is suitable for a new design and whether a documented alternative can preserve an existing 14-pin TSSOP footprint.

Pilihan pengganti yang segera untuk LM224DTBR2 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LM224DTBR2 (sama faktor bentuk dan kaki) — berbeza dalam Package, Number of Amplifier Channels, Product Type.

onsemi
Package: 14-TSSOP
Number of Amplifier Channels: 4 channels
Product Type: Quad general-purpose operational amplifier
Bandingkan Dengan LM224DTBR2 →
onsemi
Product Type: Quad operational amplifier
Bandingkan Dengan LM224DTBR2 →

LM224DTBR2G

✅ Masuk Drop-In
📦 TSSOP-14
Same 14-pin TSSOP footprint and principal performance ratings; ordering suffix differs by 0% in stated core electrical parameters.

📋 Alternatif rujukan (tidak dalam katalog)

LM224DTBG

✅ Masuk Drop-In
onsemi
📦 TSSOP-14
Quad general-purpose operational amplifier · 4 channels · 3 V to 32 V · 32 V · -25°C to +85°C · 14-TSSOP · 14 pins · Low-power operational amplifier

Hubungi untuk harga

Lihat Datasheet →

LM324DTBR2

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
onsemi
📦 TSSOP-14
Quad operational amplifier · 4 circuits · 3 V to 32 V · 5 mV maximum · True differential inputs · Standard general-purpose amplifier · 14-pin TSSOP · Surface mount

Hubungi untuk harga

Lihat Datasheet →

LM224DTBR2 Penilaian maksimum & Ciri-ciri Elektrik

Number of Amplifier Channels 4 circuits
Operating Supply Range 3 V to 32 V
Supply Type Single supply
Input Type True differential inputs
Product Class Standard general-purpose operational amplifier
Kemasan 14-pin TSSOP
Jenis Pemasangan Surface mount
Bilangan Pin 14 pins

Panduan Konfigurasi Pin LM224DTBR2 14-pin tssop

Konfigurasi pin untuk LM224DTBR2 (14-pin tssop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 14-pin tssop untuk LM224DTBR2

Tiada data garisan pin yang diperoleh untuk LM224DTBR2.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LM224DTBR2 patut untuk 6 aplikasis: Industrial Sensor Conditioning, ADC Input Buffering, Audio Preamplifier and Mixer, Single-Supply Control Circuit, Active Analog Filter, Portable and Battery-Powered Instrumentation.

🏭

Industrial Sensor Conditioning

The LM224DTBR2 is suitable for conditioning low-level industrial sensor signals because four channels can provide gain, filtering, and buffering within one 14-pin TSSOP package. A typical signal chain could use a non-inverting stage to raise the sensor voltage, an active low-pass filter to reject noise, and a voltage follower to drive the next circuit. The device operates from a 3 V to 32 V single supply, allowing it to work across low-voltage electronics and higher industrial rails. The designer must keep sensor signals within the input common-mode range and verify that the required output level fits within the specified swing limits.

📡

ADC Input Buffering

The LM224DTBR2 can provide isolation and gain between a source and an analog-to-digital converter. With four channels, one design may combine a unity-gain input driver, an anti-alias filter, a second gain stage, and an output buffer without requiring four separate packages. Its 3 V to 32 V operating range supports both compact low-voltage systems and broader industrial supply environments. Because this is a general-purpose amplifier rather than a guaranteed rail-to-rail input device, the engineer should calculate the signal's common-mode operating point and confirm source impedance and capacitive loading behavior before finalizing the filter and feedback network.

🎧

Audio Preamplifier and Mixer

The LM224DTBR2 can implement several stages in a small audio preamplifier or passive mixer, including input amplification, summing, and output buffering. Its four independent channels reduce package count and can shorten the analog path on a space-constrained board. The single-supply operation from 3 V to 32 V permits the circuit to share a system rail, although the usable signal swing remains constrained by the output limits. For microphone or line-level inputs, the source should be referenced to the mid-supply point where necessary, and the designer should verify gain, bandwidth, slew-rate, and output-loading requirements against the intended audio spectrum.

🔧

Single-Supply Control Circuit

The LM224DTBR2 is well suited to general-purpose control boards that accept analog command or feedback signals referenced to ground. Its four channels can form error amplifiers, comparators around a reference, current or voltage buffers, and output drivers for control elements. The 3 V to 32 V supply range allows use in systems whose control rail differs from a 5 V logic rail. Because the amplifier is not specified as a rail-to-rail input part, the common-mode range must be checked throughout the command range. Feedback components should also be selected for the intended closed-loop gain and stability with the output load represented by the actual control circuit.

📺

Active Analog Filter

The four channels of the LM224DTBR2 can implement active low-pass, high-pass, or band-pass sections around a sensor or measurement chain. Two channels can form a second-order filter section, while the remaining channels can provide input and output buffering or another signal-conditioning stage. This consolidation is valuable in compact instrumentation where board area is limited. The resistor and capacitor values should be selected from the desired corner frequency and closed-loop gain, then checked for acceptable step response and noise. The common package supply makes it important to route high-current feedback and output currents away from sensitive input traces to reduce coupling between channels.

📱

Portable and Battery-Powered Instrumentation

The LM224DTBR2 can serve as the analog core in portable instrumentation when the system operates from a 3 V or higher single rail. Four channels provide useful flexibility for sensor amplification, filtering, and buffering while the 14-pin TSSOP supports compact surface-mount layouts. Low-voltage operation does not make every signal automatically usable: inputs below ground are outside a simple single-supply design unless the source is biased into the valid common-mode window. A battery-powered design should also verify the amplifier's supply current and output-current behavior against the available power budget, because general-purpose specifications do not guarantee low-power operation comparable to purpose-built micropower amplifiers.

What is the operating voltage of LM224DTBR2?
The LM224DTBR2 operates from a single supply of 3 V to 32 V. According to the onsemi LM224DTBR2 datasheet, this range supports the general-purpose four-channel amplifier in low-voltage analog systems and higher industrial supply environments. Because the device does not require a negative supply for basic operation, each channel can use the same supply and common ground. The designer must still observe the specified input common-mode and output swing limits, which are narrower than the full 3 V to 32 V supply range.
How many op amps are in LM224DTBR2?
The LM224DTBR2 contains four independent operational-amplifier circuits in one 14-pin TSSOP package. The onsemi product information identifies it as a standard general-purpose amplifier with four circuits and true differential inputs. This arrangement is useful when a board requires several amplifier functions, such as sensor conditioning, ADC-driver buffering, cross-coupled filtering, or gain stages around a converter. Each channel shares the package supply and ground connections, so partition sensitive nodes and maintain a low-impedance supply return.
What is the LM224DTBR2 package and pin count?
The LM224DTBR2 is packaged as a 14-pin TSSOP for surface-mount assembly. The onsemi LM224DTBR2 datasheet and product listings identify the part as a four-circuit, single-supply operational amplifier in this compact package. The narrow TSSOP body requires careful PCB layout because lead spacing, copper routing, and exposed pad requirements must match the manufacturer drawing. Use the pin-description table in the manufacturer datasheet when assigning amplifier inputs, outputs, supply, and ground connections.
Where can I download the LM224DTBR2 datasheet PDF?
The LM224DTBR2 datasheet PDF is available through the linked onsemi document repository and the datasheet result listed on this page. The manufacturer document describes the single-supply quad operational amplifier, electrical characteristics, package information, and application guidance. Use the manufacturer datasheet as the authoritative source for pin names, recommended operating conditions, input and output limits, and PCB layout. The linked datasheet result currently identifies the document as 12 pages; verify the current document revision before releasing a production design.
Is LM224DTBR2 suitable for single 5 V supply designs?
Yes, the LM224DTBR2 is suitable for a 5 V single-supply design because its specified operating range begins at 3 V. Its four true-differential channels can amplify or buffer signals referenced to the common ground. The 5 V supply does not imply that every input and output can swing across the complete rail-to-rail range; input common-mode voltage and output swing must remain within the manufacturer limits. Biasing a bipolar-input amplifier near the negative rail may require attention to common-mode behavior for signals close to ground.
What can replace LM224DTBR2?
The onsemi LM224DTBR2G is a documented drop-in replacement because cross-reference information describes matching terminals, package, and principal performance characteristics. The onsemi LM224DTB is another same-package option identified as fully replaceable in the cross-reference results. Confirm the exact ordering suffix, temperature rating, and production status before substitution, particularly when RoHS, automotive, or lifecycle requirements apply. PCB changes should not be necessary when the alternative uses the same 14-pin TSSOP footprint and electrical configuration.
What is the best drop-in replacement for LM224DTBR2?
The LM224DTBR2G is the strongest documented drop-in choice because the cross-reference comparison describes it as a complete replacement with consistent terminals, package, and main performance characteristics. The LM224DTB is also identified as completely replaceable in the same 14-pin TSSOP format. Both alternatives should be checked against the exact requirements of the original design, including supply range, temperature grade, offset voltage, bias current, and lifecycle status. These checks matter even when the land pattern is unchanged.
When should I choose LM224DTBR2 instead of LM324DTBR2?
Choose the LM224DTBR2 when the design requires the LM224 family's temperature-grade positioning or an exact onsemi ordering configuration; choose an LM324-family alternative only after confirming its temperature range and electrical limits against the application. Both families are general-purpose quad amplifiers, but they are not automatically interchangeable across every environmental requirement. The onsemi LM224DTBR2 datasheet should define the authoritative operating-temperature range. For industrial equipment, compare that range and qualification requirements rather than relying only on the shared TSSOP footprint.
Can LM224DTBR2 be used for sensor signal conditioning?
Yes, the LM224DTBR2 can condition low-level sensor signals when the input common-mode voltage, output swing, noise, and offset requirements fall within its limits. Its four amplifiers permit a design to combine non-inverting or inverting gain, filtering, buffering, and level shifting around a sensor interface. A powered sensor near ground may require careful biasing because a simple single-supply implementation cannot amplify signals far below ground. Follow the manufacturer input-range and output-swing limits rather than assuming rail-to-rail behavior.
What are the key specifications of LM224DTBR2 that engineers should know?
The key specifications are a 3 V to 32 V single-supply operating range, four operational-amplifier channels, true differential inputs, and a 14-pin TSSOP surface-mount package. These characteristics place the LM224DTBR2 in the general-purpose analog amplification category and distinguish it from precision, rail-to-rail, and high-speed amplifier families. The onsemi datasheet is the controlling reference for gain bandwidth, slew rate, offset voltage, bias current, common-mode range, output swing, quiescent current, and temperature limits.
Is LM224DTBR2 the same as LM224DTBR2G?
The LM224DTBR2 and LM224DTBR2G are treated as complete replacements by the documented cross-reference comparison, which reports consistent performance characteristics, terminals, and package. Both use the 14-pin TSSOP format, so the PCB footprint can be retained. Before finalizing the substitution, verify the exact suffix-specific temperature, packaging, compliance, and lifecycle requirements in the current onsemi documentation. A pin-compatible footprint does not by itself establish equivalent qualification for every end application.
What is the difference between LM224DTBR2 and LM224DTB?
The LM224DTBR2 and LM224DTB use the same 14-pin TSSOP device configuration, and the cross-reference result identifies LM224DTB as a complete replacement for LM224DTBR2. The most likely distinction is the ordering or packaging suffix, so procurement and mounting requirements must be compared rather than assuming identical reel or transport presentation. Use the manufacturer part-number drawing and ordering information for packaging details. Electrically, the documented comparison reports consistent principal performance characteristics.
Where can I buy LM224DTBR2 and check its price?
Use the Request a Quote form on this page to request LM224DTBR2 pricing, availability, and lead time from XAIPART. The form is the appropriate route for a current commercial quotation because market pricing and inventory can change independently of the technical datasheet. Provide the exact MPN LM224DTBR2 and the required quantity and packaging details. The manufacturer part number should remain unchanged during quotation to avoid accidentally receiving a different suffix with different ordering or temperature characteristics.
What is the lead time for LM224DTBR2?
Current lead time for LM224DTBR2 depends on supplier inventory, order quantity, packaging, and manufacturing conditions. Submit the exact MPN and required quantity through the Request a Quote form on this page to obtain a current availability and lead-time response. Do not use a generic LM224 designation when requesting a quotation, because the DTBR2 suffix identifies the specific 14-pin TSSOP ordering configuration. For production planning, request the earliest delivery date and any lot or date-code requirements with the quotation.
Is LM224DTBR2 in stock?
Current LM224DTBR2 stock should be confirmed through the Request a Quote form on this page because quantity and package availability can change quickly. Include the exact MPN, desired quantity, and standard shipment destination when requesting supply status. The part's active lifecycle classification does not by itself guarantee immediate inventory. XAIPART can then confirm the current sourcing position and any scheduled replenishment information associated with the requested order quantity.
What onsemi amplifier is the best cross-brand equivalent for LM224DTBR2?
No specific cross-brand MPN can be identified responsibly from the available cross-reference records for LM224DTBR2. The records establish compatible onsemi options, but they do not name a qualified competitor with a verified 14-pin TSSOP footprint and matching electrical limits. A valid cross-brand selection must be checked for channel count, supply range, input common-mode range, output swing, offset, bias current, stability, package, and temperature grade. Using an unverified cross reference can create input-range or common-mode failures despite an apparently matching footprint.
Does LM224DTBR2 need negative supply voltage?
No, the LM224DTBR2 is designed for single-supply operation, so a negative supply is not required for basic amplification. The onsemi listing identifies it as a single-supply quad operational amplifier with a 3 V to 32 V operating range. Signals must remain inside the specified common-mode input window, and the output must remain inside the allowed swing range. A negative rail can still be useful when the source signal is bipolar and cannot be shifted into the positive-supply input range without limiting usable signal amplitude.

Data referensi kejuruteraan untuk LM224DTBR2 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LM224DTBR2 for a general-purpose four-channel analog design that operates from a single 3 V to 32 V supply and fits the 14-pin TSSOP footprint. It is particularly useful when several independent gain, filtering, or buffering stages are required in a compact board. LM224DTBR2G is the preferred documented drop-in choice when an exact onsemi suffix substitution is needed; it retains the package, terminals, and principal performance characteristics. LM224DTB is another documented TSSOP-14 replacement, but the suffix-specific ordering and packaging requirements should be checked before procurement. LM324DTBR2 is useful only when its electrical and temperature-grade specifications satisfy the design. No specific cross-brand option is recommended without a verified 14-pin TSSOP footprint and full operating-range review. For any candidate, check common-mode range, output swing, offset, bias current, bandwidth, slew rate, stability, and operating temperature rather than comparing package names alone.

Perbandingan dengan Gantian

Parametr Produk Ini LM224DTBR2G LM224DTB LM324DTBR2
Brand onsemi onsemi onsemi onsemi
Package TSSOP-14 TSSOP-14 TSSOP-14 TSSOP-14
Amplifier Channels 4 circuits 4 circuits 4 circuits 4 circuits
Product Class Standard general-purpose amplifier Standard general-purpose amplifier Standard general-purpose amplifier Standard general-purpose amplifier
Pin Count 14 pins 14 pins 14 pins 14 pins
Mounting Type Surface mount Surface mount Surface mount Surface mount

Penyeberangsung Jelas

  • Four independent channels in a compact 14-pin package (vsLM224DTBR2G)
  • Single-supply range spans 3 V to 32 V (vsLM224DTB)
  • LM224-family selection retains industrial-grade positioning (vsLM324DTBR2)

Catatan Desain

Place the supply decoupling capacitor immediately adjacent to the package power pin, and connect the package ground pin to a low-impedance ground plane. Keep the four channels' input and feedback traces short, particularly when they carry signals far below the supply rail. Because all channels share internal supply connections, route output-current paths and capacitor return currents so they do not share narrow traces with sensitive input returns. Follow the exact capacitor and copper recommendations in the manufacturer datasheet for the chosen TSSOP layout.

Do not assume that a 3 V to 32 V supply rating permits input and output signals to cover the full rail-to-rail range. Check the input common-mode window and output swing for the actual supply voltage, output load, and temperature. Inputs near ground can require an artificial bias point when no negative supply is present. Also verify the gain-bandwidth, slew-rate, output-current, and stability requirements of each closed-loop configuration before using all four channels simultaneously.

Give each amplifier an independent feedback network and keep each input node physically separated from high-current output pins on the same package. If one channel drives a low-impedance load while another measures a small signal, route the load return directly to the supply ground and preserve a quiet analog ground region for the measurement channel. Add filtering and bypassing at the board boundary when long cables or switching supplies enter the board. This partitioning reduces channel-to-channel coupling that is not visible from the block diagram.

Size feedback resistors and compensation capacitors for the actual gain, source impedance, load capacitance, and required bandwidth. A low-value feedback network can increase capacitive loading and risk stability problems, while excessively high values can increase noise and offset sensitivity. Simulate the intended topology with the load connected, then measure input-referred noise and settling behavior on the assembled board. Keep sensitive summing nodes short and use a nearby ground reference for every feedback component.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Specific compliance declarations and qualification status must be confirmed using the exact LM224DTBR2 ordering information and the current manufacturer documentation.

Pencarian Berhubungan

LM224DTBR2 datasheet LM224DTBR2 pinout LM224DTBR2 datasheet pdf LM224DTBR2 equivalent LM224DTBR2 replacement LM224DTBR2 cross reference onsemi LM224DTBR2 LM224DTBR2 TSSOP-14 LM224DTBR2 3-32V LM224DTBR2 quad op amp LM224DTBR2 vs LM224DTBR2G LM224DTBR2 price LM224DTBR2 stock LM224DTBR2 application circuit

Komponen dan Tanda berkaitan

onsemi LM224DTBR2 LM224DTBR2G LM224DTB LM324DTBR2 operational amplifier op amp quad amplifier four-channel amplifier analog integrated circuit linear amplifier signal conditioning single-supply operation true differential input feedback network input common-mode range output voltage swing gain-bandwidth product TSSOP-14 TSSOP package family surface-mount device industrial control sensor interface active filter audio preamplifier
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ