Texas Instruments

LM324KAPWRG4 - Quad 14-TSSOP Op Amp | Texas Instruments

MPN: LM324KAPWRG4 ✓ Aktif
Single or dual supply Vdss 0.8 mA Id 14-TSSOP Package
MOQ: 1 |

LM324KAPWRG4 Ringkasan

The Texas Instruments LM324KAPWRG4 is a low-power, general-purpose quadruple operational amplifier integrating four amplifiers in a 14-pin TSSOP package. It supports single-supply operation, offers a typical low-supply-current drain of 0.8 mA, and is designed for general-purpose applications that require one amplifier per signal channel.

An operational amplifier is an analog signal-conditioning device that uses high open-loop gain to amplify differences between its input terminals. The LM324 family combines four operational amplifiers with supply drain that remains largely independent of supply voltage. Its common-mode input range includes ground, allowing the device to operate from a positive supply while processing signals whose lower excursion approaches the negative supply rail.

The LM324KAPWRG4 is identified as a standard general-purpose amplifier with four circuits and 2 kV ESD protection. According to the LM324 manufacturer information, it supports wide supply ranges of up to 26 V for single-supply operation and up to plus or minus 13 V for dual supplies. Its common-mode input capability is especially useful for sensor interfaces, transducer amplifiers, audio paths, and control signals referenced to ground.

The four-amplifier configuration reduces the number of packages needed when several independent low-frequency signals must be processed. Each amplifier can operate independently, allowing one LM324KAPWRG4 to implement functions such as two instrumentation-amplifier sections, four voltage followers, or a mixture of summing, buffering, and gain stages. Independent operation requires careful grounding and decoupling so that high-current output stages do not disturb sensitive channels sharing the package.

Typical applications include low-cost sensor conditioning, audio preamplification, active filtering, current-to-voltage conversion, and general industrial control. The TSSOP-14 surface-mount package supports compact PCB layouts, but its small thermal dissipation area makes trace and copper-plan consideration important when driving capacitive loads or operating continuously near the supply limits.

For layout, place the package power-decoupling capacitor close to the supply pins and connect each ground reference to a low-impedance ground plane. Avoid placing sensitive input traces beside output traces carrying fast transients. Check output-swing and common-mode limits at the actual supply voltage and load before committing the design.

This product page combines package, application, and drop-in replacement guidance with practical PCB and signal-integrity considerations. It also distinguishes same-footprint LM324 variants so engineers can review orderable suffixes and functional differences before redesigning an existing 14-TSSOP layout.

Pilihan pengganti yang segera untuk LM324KAPWRG4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LM324KAPWRG4 (sama faktor bentuk dan kaki) — berbeza dalam Package, Amplifier Type, Supply Configuration, Number of Channels, Package Type.

Texas Instruments
Package: 14-pin TSSOP (PW)
Amplifier Type: General-purpose operational amplifier
Bandingkan Dengan LM324KAPWRG4 →
Texas Instruments
Package: 14-pin TSSOP
Amplifier Type: Quad general-purpose operational amplifier
Number of Channels: 4 channels
Bandingkan Dengan LM324KAPWRG4 →
Texas Instruments
Amplifier Type: Quad general-purpose operational amplifier
Supply Configuration: Single supply or split supply
Number of Channels: 4 independent channels
Bandingkan Dengan LM324KAPWRG4 →

LM324PWRG4

✅ Masuk Drop-In
Texas Instruments
📦 14-TSSOP
Quad general-purpose operational amplifier · 4 independent channels · 1.2 MHz · 3 V to 32 V total · ±16 V · Single supply or split supply · Yes · High-gain, internally compensated

Hubungi untuk harga

Lihat Datasheet →

LM324APW

✅ Masuk Drop-In
📦 14-TSSOP
Same LM324-family 14-TSSOP footprint; K suffix grade, temperature range, and qualification attributes must be checked

📋 Alternatif rujukan (tidak dalam katalog)

LM324APWR

✅ Masuk Drop-In
Texas Instruments
📦 14-TSSOP
4 circuits · General-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · 0°C to 70°C · 14-pin TSSOP (PW) · 14 pins

Hubungi untuk harga

Lihat Datasheet →

LM324APWRG4

✅ Masuk Drop-In
Texas Instruments
📦 14-TSSOP
4 · Quad general-purpose operational amplifier, unity-gain stable · ±16 V (32 V max total supply) · ±3 mV typ (LM324A grade) · 0.8 mA typ, independent of supply voltage · 2 kV · Includes ground, allowing direct sensing at 0 V · 14

Hubungi untuk harga

Lihat Datasheet →

LM324KAPW

✅ Masuk Drop-In
Texas Instruments
📦 14-TSSOP
Quad general-purpose operational amplifier · 4 channels · 4 circuits · 2 kV · 1.2 MHz · 14-pin TSSOP · TSSOP-14 · Surface mount

Hubungi untuk harga

Lihat Datasheet →

LM324KAPWRG4 Penilaian maksimum & Ciri-ciri Elektrik

Product Type Quad general-purpose operational amplifier
Number of Amplifiers 4 circuits
Kemasan 14-TSSOP
Jenis Pemasangan Surface mount
Supply Configuration Single or dual supply
Maximum Single-Supply Voltage 26 V
Maximum Dual-Supply Magnitude 13 V per rail
Typical Supply-Current Drain 0.8 mA
ESD Protection 2 kV
Common-Mode Input Range Includes ground

Panduan Konfigurasi Pin LM324KAPWRG4 14-tssop

Konfigurasi pin untuk LM324KAPWRG4 (14-tssop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 14-tssop untuk LM324KAPWRG4

Tiada data garisan pin yang diperoleh untuk LM324KAPWRG4.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LM324KAPWRG4 patut untuk 6 aplikasis: Low-Cost Sensor Signal Conditioning, Audio Preamplification, Active Filtering and Buffering, Current-to-Voltage Conversion, Industrial Control Signal Interfaces, Portable Battery-Powered Analog Circuits.

🏭

Low-Cost Sensor Signal Conditioning

The LM324KAPWRG4 is well suited to low-frequency sensor conditioning because its common-mode input range includes ground and four amplifier channels are integrated in one 14-TSSOP package. It can form non-inverting or inverting stages for resistive sensors whose signals remain within the amplifier's input range. The typical 0.8 mA supply-current drain also helps limit power demand in portable measurement systems. Designers should place the supply bypass capacitor close to the device, return input and output grounds to a low-impedance plane, and verify the input bias-current error against the sensor impedance.

🎧

Audio Preamplification

The four channels in LM324KAPWRG4 allow a compact audio preamplifier to implement several gain stages without requiring four separate packages. Its common-mode input range that includes ground supports single-supply operation with source-coupled audio signals, while the low-power architecture suits battery-operated sound equipment. The TSSOP-14 footprint simplifies compact analog boards, although signal routing must prevent one amplifier's output transient from coupling into adjacent audio inputs. Verify the output swing, slew rate, and channel-to-channel behavior in the intended gain configuration before production.

⚡

Active Filtering and Buffering

LM324KAPWRG4 can implement buffered active filters, voltage followers, and general small-signal conditioning networks. Four independent amplifiers make it convenient to cascade multiple low-frequency stages while retaining a single package and common ground reference. The device's typical supply-current drain of 0.8 mA supports efficient analog conditioning where each stage operates continuously. Component tolerances and the amplifier's open-loop gain and frequency response determine filter accuracy, so check those characteristics in the manufacturer datasheet and use short, quiet routing around high-impedance nodes.

🔧

Current-to-Voltage Conversion

The LM324KAPWRG4 is appropriate for low-level current-to-voltage conversion when the source current can be referenced through a suitable shunt or feedback network. Its input stage can accept signals near ground under single-supply operation, matching many current-feedback sensor systems. The wide single-supply capability reaches 26 V according to the manufacturer family information, allowing the same amplifier family to support higher-voltage industrial interfaces. Keep the high-impedance summing node short, protect input terminals from excessive differential voltage, and verify bias-current-induced offset for the selected feedback resistor.

🏭

Industrial Control Signal Interfaces

The LM324KAPWRG4 can condition controller-level signals in industrial control modules that use positive single supplies. Its common-mode input range includes ground, which supports logic-compatible signals when the supply and signal amplitudes remain within specification, and its 14-TSSOP package helps limit board area. The 2 kV ESD protection associated with this ordering option adds useful handling margin in controlled industrial environments. Confirm the actual signal levels, output loading, temperature grade, and channel isolation when planning the layout, particularly around motor-control power stages.

📱

Portable Battery-Powered Analog Circuits

The LM324KAPWRG4's low-power characteristics make it useful in portable analog blocks where four amplifier channels are required. According to the LM324 documentation, the supply-current drain is typically 0.8 mA and remains independent of supply voltage, helping simplify power budgeting. A single positive supply and a common-mode range extending to ground simplify many sensor interfaces. Engineers should disable unneeded channels where the selected variant supports it, account for input bias current in high-impedance sensors, and confirm the complete battery operating range against the output-swing limits.

What is the LM324KAPWRG4?
The LM324KAPWRG4 is a Texas Instruments low-power, general-purpose quadruple operational amplifier with four amplifier circuits in a 14-pin TSSOP package. According to the Texas Instruments LM324 product information, the family is designed for single-supply operation across a wide voltage range and also supports dual supplies up to plus or minus 13 V.
What are the key specifications of LM324KAPWRG4 that engineers should know?
The LM324KAPWRG4 combines four general-purpose operational amplifiers, a 14-TSSOP package, 2 kV ESD protection, and typical supply-current drain of 0.8 mA in one device. According to the LM324 manufacturer information, it supports single supplies up to 26 V or dual supplies up to plus or minus 13 V, and its common-mode input range includes ground.
Can LM324KAPWRG4 operate from a single 5 V supply?
The LM324KAPWRG4 can operate from a single 5 V supply because the LM324 family is designed for single-supply operation across a wide voltage range. According to the Texas Instruments product information, its common-mode input range includes ground, which is useful for sensors and control signals referenced to the lower supply rail.
Where can I download the LM324KAPWRG4 datasheet PDF?
The official LM324 datasheet and product support materials are available from the Texas Instruments LM324 product page at https://www.ti.com/product/LM324. The LM324KAPWRG4 ordering information, package details, electrical characteristics, and pin assignments should be confirmed against the manufacturer documentation before layout release.
Where can I find the LM324KAPWRG4 pinout?
The LM324KAPWRG4 pinout is defined in the pin-description table of the Texas Instruments LM324 datasheet. The device is a 14-pin TSSOP containing four operational amplifiers; use the manufacturer pin table when assigning supply, ground, input, and output nets because the exposed package drawing alone does not identify electrical functions.
What can replace the LM324KAPWRG4 on an existing PCB?
The LM324KAPWRG4 can be replaced with a pin-compatible 14-TSSOP LM324-family device such as LM324PWRG4 when its ordering suffix, temperature rating, and qualification requirements remain acceptable. According to the published LM324KAPW comparison, LM324PWRG4 has consistent terminals, package, and principal operating characteristics.
Is LM324KAPWRG4 the same as LM324PWRG4?
The LM324KAPWRG4 and LM324PWRG4 are LM324-family 14-TSSOP devices with consistent functional characteristics and terminals. According to the published comparison, LM324PWRG4 is described as a complete replacement; nevertheless, confirm the exact suffix, grade, operating-temperature limits, and ESD requirements before production use.
When should I choose LM324KAPWRG4 over another LM324K variant?
Choose LM324KAPWRG4 when the design requires the Texas Instruments LM324 function in a 14-TSSOP footprint and the associated ordering and qualification characteristics are acceptable. If an alternate suffix changes temperature grade, ESD rating, or marking, review those differences rather than treating every LM324-family MPN as an unconditional substitution.
Is LM324KAPWRG4 suitable for sensor signal conditioning?
The LM324KAPWRG4 is suitable for low-frequency sensor signal conditioning because its common-mode input range includes ground and its four amplifier channels can process several signals in one package. According to the Texas Instruments LM324 information, the device supports single-supply operation across a wide voltage range and has 2 kV ESD protection.
What is the supply-current draw of LM324KAPWRG4?
The LM324 family has a typical supply-current drain of 0.8 mA that is largely independent of supply voltage. According to the LM324 manufacturer documentation, this low-power characteristic supports battery-operated and low-power analog systems when the four amplifier channels are operated within their specified common-mode and output ranges.
LM324KAPWRG4 vs LM324APWRG4: which is the better drop-in replacement?
Both devices use the LM324-family 14-TSSOP format, but the correct choice depends on the exact suffix-specific temperature grade, ESD rating, qualification, and ordering details. The LM324KAPWRG4 has 2 kV ESD protection according to its product listing; compare that requirement directly with the selected LM324APWRG4 specification before substitution.
Where can I buy LM324KAPWRG4 and check its current lead time?
Use the Request a Quote form on this page to ask about LM324KAPWRG4 availability, current lead time, and order quantity. The manufacturer lists the LM324 as a low-power, quad operational-amplifier family for single-supply operation, allowing the exact package suffix to be reviewed before placing an order.
How much does LM324KAPWRG4 cost?
Use the Request a Quote form on this page for the current LM324KAPWRG4 price and quantity availability. The part is a 14-TSSOP, four-amplifier Texas Instruments device with 2 kV ESD protection, so request the exact MPN to preserve the correct package, ordering suffix, and qualification attributes.
Is LM324KAPWRG4 in stock?
Current inventory should be confirmed through the Request a Quote form on this page. One distributor listing identifies LM324KAPWRG4 as in stock, but inventory can change rapidly; request the exact MPN for current stock, factory packaging, and delivery information.
What are the best ON Semiconductor equivalents for LM324KAPWRG4?
The ON Semiconductor equivalents cannot be selected reliably from the listed cross-reference results alone because no specific ON Semiconductor MPN with a verified 14-TSSOP footprint was identified. Use the manufacturer or distributor cross-reference tool to locate a candidate, then confirm pin-for-pin assignment, supply range, common-mode range, output swing, bandwidth, and ESD rating before approving it as a drop-in replacement.
What design details matter most when using LM324KAPWRG4?
Decoupling, grounding, and input-output isolation are the main layout considerations for LM324KAPWRG4. According to the Texas Instruments LM324 information, the family includes ground in its common-mode input range and uses low supply-current drain; place the bypass capacitor near the supply pins, route inputs away from outputs, and verify stability for the selected gain and capacitive load.

Data referensi kejuruteraan untuk LM324KAPWRG4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LM324KAPWRG4 for general-purpose, low-frequency analog designs that need four amplifiers in a 14-TSSOP package, especially single-supply systems whose signals approach ground. Its listed 2 kV ESD protection and typical 0.8 mA supply-current drain make it suitable for industrial signal-conditioning, sensor-interface, audio, and portable applications. LM324PWRG4 is a practical same-family option when its ordering and qualification characteristics satisfy the design. LM324APW, LM324APWR, and LM324APWRG4 retain the LM324-family footprint and function, but their suffix-specific temperature, ESD, and qualification attributes must be compared with the target requirements. LM324KAPW can serve as a closely related option when the final orderable suffix is acceptable. For any replacement, verify pin assignment, supply range, common-mode range, output swing, gain-bandwidth product, and qualification rather than relying on package appearance alone.

Perbandingan dengan Gantian

Parametr Produk Ini LM324PWRG4 LM324APW LM324APWR LM324APWRG4 LM324KAPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-TSSOP 14-TSSOP - same package 14-TSSOP - same package 14-TSSOP - same package 14-TSSOP - same package 14-TSSOP - same package
Amplifier Count 4 4 4 4 4 4
Product Type General-purpose operational amplifier General-purpose operational amplifier LM324-family operational amplifier LM324-family operational amplifier LM324-family operational amplifier LM324-family operational amplifier

Penyeberangsung Jelas

  • Four general-purpose amplifiers in one compact package (vsLM324PWRG4)
  • Ground-referenced common-mode input capability (vsLM324APW)
  • Wide single-supply operating range (vsLM324APWR)
  • Low supply-current drain independent of supply voltage (vsLM324APWRG4)

Catatan Desain

Place the supply-bypass capacitor directly between the LM324KAPWRG4 supply and ground pins, and provide a short return path through the ground plane. The TSSOP-14 leads are closely spaced, so route input and output nets on different layers where practical. Keep each amplifier's feedback components close to its assigned pins to minimize parasitic feedback and sensitivity to adjacent-channel switching.

Route sensitive noninverting inputs away from output pins and switching nodes. The LM324's common-mode range includes ground, but that does not eliminate the need to check input absolute-maximum limits, output swing, and stability at the selected gain. When driving a capacitive load, place a small isolation resistor close to the output and verify the resulting response on the assembled board.

Do not assume that every LM324 suffix is an automatic substitution. Review the exact ordering code for operating-temperature grade, ESD rating, qualification, and package suffix before replacing LM324KAPWRG4. Also verify the actual supply voltage, input common-mode range, and output load; a valid footprint match alone does not guarantee identical electrical limits.

The 14-TSSOP package has limited heat-dissipation area compared with larger leaded packages. For continuous operation at high output current, high ambient temperature, or a large supply-to-output difference, estimate channel dissipation from the output current and voltage drop, then check junction temperature against the selected grade. Use the exposed ground connection and copper area effectively while maintaining the layout requirements for analog isolation.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product listings identify the part as a 14-TSSOP general-purpose amplifier with 2 kV ESD protection. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the manufacturer compliance documentation.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

LM324KAPWRG4 datasheet LM324KAPWRG4 pinout LM324KAPWRG4 datasheet pdf LM324KAPWRG4 equivalent LM324KAPWRG4 replacement LM324KAPWRG4 cross reference LM324KAPWRG4 vs LM324PWRG4 LM324KAPWRG4 footprint LM324KAPWRG4 application circuit Texas Instruments LM324KAPWRG4 LM324KAPWRG4 price LM324KAPWRG4 stock LM324KAPWRG4 14-TSSOP amplifier LM324KAPWRG4 2kV ESD LM324KAPWRG4 single supply operation

Komponen dan Tanda berkaitan

Texas Instruments LM324 LM324KAPWRG4 LM324PWRG4 LM324APW LM324APWR LM324APWRG4 LM324KAPW quad operational amplifier general-purpose amplifier analog integrated circuit amplifier IC single-supply operation dual-supply operation common-mode input voltage range supply-current drain ESD protection 14-TSSOP TSSOP package family surface-mount technology sensor signal conditioning audio preamplification active filtering current-to-voltage conversion industrial control
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ