MAX232ECDWRG4 - Dual RS-232 Interface | Texas Instruments
MPN: MAX232ECDWRG4 ✓ AktifMAX232ECDWRG4 Ringkasan
An RS-232 transceiver is an interface circuit that converts logic-level UART signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. Within the interface hierarchy, the MAX232 belongs to the RS-232 transceiver family, which combines drivers, receivers, charge-pump voltage conversion, and transient protection in one semiconductor package.
The MAX232ECDWRG4 includes two drivers and two receivers, allowing one package to support two RS-232 communication channels. Its single 5 V supply architecture simplifies system power planning, while the integrated charge pump generates the positive and negative voltages required by RS-232 drivers. Operation up to 120 kbit/s makes the device appropriate for legacy serial ports, industrial control links, equipment interfaces, and embedded systems using compatible RS-232 protocols.
IEC 61000-4-2 protection is a key feature for connectors exposed to electrostatic discharge. The protection capability helps reduce system susceptibility to ESD events at the interface boundary, although it does not eliminate the need for correct grounding, cable design, and connector placement. The input circuitry tolerates levels to ±30 V, supporting the voltage stress commonly encountered on RS-232 networks.
Typical uses include PC-compatible serial ports, test equipment, security systems, instrumentation, industrial controllers, and point-of-sale equipment. Two complete driver-receiver sections can also support separate transmit and receive paths or more than one RS-232 port when several devices share the same PCB. The 16-pin SOIC package supports conventional surface-mount assembly and is easy to route on standard industrial-control boards.
Place the two 1.0 uF charge-pump capacitors close to their designated pins, connect the supply and ground pins to low-impedance planes, and route the RS-232 traces away from sensitive analog signals. Confirm that the external capacitor voltage rating and dielectric are suitable for the charge-pump waveform. PCB power and ground handling should account for the charge pump's switching current even though the interface itself is designed for a single 5 V rail.
This product overview combines the verified electrical capabilities, package details, interface standards, application guidance, replacement considerations, and practical layout notes needed to evaluate the MAX232ECDWRG4 for an RS-232 design. It also highlights the distinction between direct pin-compatible replacements and broader functional alternatives when maintaining an existing circuit board.
Pilihan pengganti yang segera untuk MAX232ECDWRG4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MAX232ECDWRG4 (sama faktor bentuk dan kaki) — berbeza dalam Product Type, Package, Interface Standard, Maximum Data Rate, Number of Receivers.
MAX232ECDWR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →MAX232ESE+T
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MAX232IDR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MAX232EESE
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
MAX232CWE+
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →MAX232ECDWRG4 Spesifikasi
| Number of Drivers | 2 drivers |
| Number of Receivers | 2 receivers |
| Jenis Antaramuka | RS-232 transceiver |
| Kadar Data | 120 kbit/s |
| Tegangan Pemberi Arus | 5 V |
| Charge-Pump Capacitor Value | 1.0 uF each |
| Receiver Input Voltage Range | -30 V to +30 V |
| ESD Protection Standard | IEC 61000-4-2 |
| RS-232 Compliance | TIA/RS-232-F and ITU Recommendation V.28 |
| Package Pin Count | 16 pins |
| Package Type | 16-pin SOIC |
| Gambaran Suhu Operasi | 0 C to +70 C |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin MAX232ECDWRG4 16-pin soic
Konfigurasi pin untuk MAX232ECDWRG4 (16-pin soic pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk MAX232ECDWRG4.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MAX232ECDWRG4 patut untuk 6 aplikasis: Legacy PC Serial Interfaces, Industrial Control Equipment, Test and Measurement Instruments, Point-of-Sale Terminals, Security and Access Systems, Embedded Service and Debug Ports.
Legacy PC Serial Interfaces
The MAX232ECDWRG4 is appropriate for legacy PC-compatible RS-232 ports because it combines two transmitters and two receivers in a 16-pin SOIC while operating from one 5 V supply. The 120 kbit/s maximum rate covers common UART links used by data-acquisition equipment, programmers, and service equipment. Its integrated charge pump eliminates separate positive and negative RS-232 power rails. Place the 1.0 uF charge-pump capacitors close to their pins and route the connector-side traces away from sensitive logic to preserve signal integrity.
Disebarkan
Industrial Control Equipment
The MAX232ECDWRG4 fits room-temperature industrial controllers that need an isolated-by-interface RS-232 level shifter for configuration tools or external equipment. Two driver-receiver channels can serve two serial links, while ±30 V receiver-input tolerance improves tolerance to RS-232 transients. The operating range of 0 C to +70 C suits commercial industrial enclosure conditions. IEC 61000-4-2 protection strengthens the connector interface, but grounding, cable routing, and appropriate external protection remain essential in factory environments.
Disebarkan
Test and Measurement Instruments
The MAX232ECDWRG4 is useful in test and measurement instruments that communicate through a legacy RS-232 command port. Its 120 kbit/s capability supports the moderate data rates commonly used for instrument control and status reporting. Two transmit and receive sections can reduce the number of interface packages when the instrument has more than one RS-232 connection. A single 5 V supply simplifies internal rail requirements, and the charge-pump capacitors should use stable ceramic types positioned for short current loops.
Disebarkan
Point-of-Sale Terminals
The MAX232ECDWRG4 supports point-of-sale peripherals that use RS-232 for receipt printers, scanners, scales, or service terminals. Its two full interface sections can accommodate multiple peripheral connections when each peripheral uses separate direction pairs. The integrated ±30 V-tolerant receivers add margin for cable-borne voltage transients, while IEC 61000-4-2 protection helps the board withstand electrostatic discharge. Keep the external connector and protection network near the board edge to minimize exposed trace length and improve EMI performance.
Disebarkan
Security and Access Systems
The MAX232ECDWRG4 is suitable for access-control panels, alarm controllers, and equipment-management interfaces that retain RS-232 service ports. Two driver-receiver channels can support either two ports or separate communication paths within one enclosure. The 5 V operating supply and 120 kbit/s rate match common embedded UART architectures. Because cable-connected access systems may experience ESD events, place the IC interface close to the connector and use a low-impedance ground plane to maintain predictable protection performance.
Disebarkan
Embedded Service and Debug Ports
The MAX232ECDWRG4 can provide a service port for embedded equipment that requires a legacy computer-facing RS-232 connection. The device bridges microcontroller UART logic levels to RS-232 while supporting operation to 120 kbit/s, which is sufficient for configuration, diagnostics, and firmware-service traffic. Its 16-pin SOIC package simplifies assembly on control boards. Use short, controlled RS-232 traces, provide a stable charge-pump capacitor network, and avoid sharing connector return paths with sensitive sensor grounding.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MAX232ECDWRG4 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MAX232ECDWR | MAX232ESE+T | MAX232IDR | MAX232EESE |
|---|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
Penyeberangsung Jelas
- Integrated ESD protection for the RS-232 interface (vsMAX232CWE)
- Two complete RS-232 channels in one package (vsMAX232ESE+T)
- Wide receiver-input tolerance (vsMAX232IDR)
- Single-supply charge-pump architecture (vsMAX232EESE)
Catatan Desain
Place both 1.0 uF charge-pump capacitors immediately across their designated pins, using the shortest possible traces. Keep the capacitor return path close to the device ground connection so charge-pump switching current does not share a long path with the RS-232 receiver return. Select ceramic capacitors with adequate DC-bias derating and verify their effective capacitance across the operating temperature range.
Route the external RS-232 connector and cable interface toward the PCB edge, with the MAX232ECDWRG4 positioned near the entry point. Separate connector-side traces from UART logic, clocks, sensors, and precision analog signals. Use a continuous ground reference and avoid routing the RS-232 return beneath high-current or switching nodes. Proper interface placement improves ESD immunity and reduces radiated emissions.
Decouple the 5 V supply at the IC with a local high-frequency ceramic capacitor and provide nearby bulk capacitance for the complete board. The charge-pump stage draws periodic current even though the interface does not require a bipolar supply. Validate the regulator's transient response and keep the supply and ground planes electrically quiet to prevent logic-level disturbance on the UART side.
Do not substitute a functional RS-232 transceiver solely because it uses a 16-pin SOIC; verify driver and receiver assignments, charge-pump capacitor values, enable or shutdown behavior, and supply requirements against the manufacturer datasheet. MAX232 variants can differ in temperature grade and ESD-protection level even when the footprint remains unchanged. Validate the complete UART signal path after substitution.
Maklumat Kesediaan
The manufacturer material identifies IEC 61000-4-2 ESD protection, TIA/RS-232-F, and ITU Recommendation V.28. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the available manufacturer and distributor records.