Analog Devices

MAX383CPE+ - Dual SPDT 35Ω Analog Switch | Analog Devices

MPN: MAX383CPE+ ✓ Aktif
3V to 15V Vdss Less than 35Ω Rds(on) PDIP-16 Package
MOQ: 1 |

MAX383CPE+ Ringkasan

The Analog Devices MAX383CPE+ is a precision, low-voltage CMOS analog switch containing two independent single-pole double-throw channels, a maximum on-resistance of 35Ω, and a 16-pin PDIP package. It operates from 3V to 15V, supports supply configurations of ±3V to ±8V, and is specified for commercial temperatures from 0°C to +70°C.

An analog switch is an electronic routing device that connects one signal terminal to one of two alternatives under digital control. A single-pole double-throw switch, or SPDT, has one common terminal and two switched terminals. The MAX383 places two SPDT switches in one 16-pin package, placing it in the hierarchy of CMOS analog switches, analog multiplexers, interface ICs, and semiconductor signal-routing components.

Each MAX383 channel has one normally open and one normally closed path. According to the manufacturer product page, the on-resistance is less than 35Ω, channel matching is guaranteed within 2Ω, and the resistance remains flat over the operating signal range. These characteristics make the matched channels useful when amplitude accuracy across a dual-channel path is more important than minimizing resistance absolutely.

The MAX383 family supports both single-supply and dual-supply operation. Its specified turn-on and turn-off times are 175ns and 100ns, respectively, enabling controlled signal routing with relatively little transition delay. The low-voltage CMOS implementation is suited to battery-powered, industrial control, instrumentation, and test-equipment systems where low-voltage logic and analog signals share the same board.

Typical uses include selecting between two sensor channels, routing test signals, switching bipolar or unipolar analog inputs, and implementing sample-and-hold paths. Two integrated SPDT switches can route complementary or paired signals while keeping channel timing and resistance characteristics closely matched.

Designers should maintain the specified 3V to 15V supply range, use pull-up or pull-down resistors where control or common-pin states require defined levels, and account for charge injection and off-state leakage when switching high-impedance or precision measurement circuits. The through-hole PDIP-16 package also simplifies prototype assembly and legacy PCB maintenance.

This page combines manufacturer specifications, matched-channel design guidance, sourcing information, package details, and same-family replacement analysis to support practical analog-switch selection beyond a basic distributor parameter summary.

Pilihan pengganti yang segera untuk MAX383CPE+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MAX383EPE+

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 PDIP-16
Same dual-SPDT MAX383 family and PDIP-16 footprint; the E temperature grade extends above the target's 0°C to +70°C range.

📋 Alternatif rujukan (tidak dalam katalog)

MAX383APE+

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 PDIP-16
Same dual-SPDT MAX383 family and PDIP-16 footprint; the A grade provides a broader temperature range than the target commercial grade.

📋 Alternatif rujukan (tidak dalam katalog)

MAX383CPE

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 PDIP-16
Same electrical MAX383CPE configuration and PDIP-16 footprint; the ordering suffix differs, so compliance and ordering attributes require verification.

📋 Alternatif rujukan (tidak dalam katalog)

MAX383CPE++

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 PDIP-16
Same MAX383CPE electrical configuration and PDIP-16 footprint; the extended compliance suffix changes ordering attributes rather than switch parameters.

📋 Alternatif rujukan (tidak dalam katalog)

MAX383EPE

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 PDIP-16
Same dual-SPDT MAX383 family and PDIP-16 footprint with extended-temperature ordering; the target is limited to 0°C to +70°C.

📋 Alternatif rujukan (tidak dalam katalog)

MAX383CPE+ Penilaian maksimum & Ciri-ciri Elektrik

Number of Switches 2
Number of Channels 2
Switch Configuration 2 x SPDT
On-Resistance Less than 35Ω
Channel Resistance Matching Within 2Ω
Supply Voltage Range 3V to 15V
Dual Supply Voltage Range ±3V to ±8V
Turn-On Time 175ns
Turn-Off Time 100ns
Gambaran Suhu Operasi 0°C to +70°C
Temperature Grade Commercial
Kemasan PDIP-16
Number of Terminals 16
Jenis Pemasangan Through Hole
Packaging Tube
Switch Type Normally Open and Normally Closed Poles
Status RoHS unknown

Panduan Konfigurasi Pin MAX383CPE+ pdip-16

Konfigurasi pin untuk MAX383CPE+ (pdip-16 pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai pdip-16 untuk MAX383CPE+

Tiada data garisan pin yang diperoleh untuk MAX383CPE+.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX383CPE+ patut untuk 6 aplikasis: Sensor Signal Selection, Precision Test and Measurement Routing, Battery-Powered Data Acquisition, Bipolar Analog Signal Multiplexing, Sample-and-Hold Signal Routing, Industrial Control Signal Multiplexing.

🧩

Sensor Signal Selection

The MAX383CPE+ can select between two sensor outputs through its two independent SPDT channels while maintaining less than 35Ω on-resistance. The manufacturer guarantees channel resistance matching within 2Ω, which helps preserve balance when the same conversion or amplifier stage handles the selected signal. A typical circuit connects each common terminal to a precision ADC input and places the two sensor sources on the switched terminals. The 175ns turn-on and 100ns turn-off times are short compared with most sensor sampling periods, but the design must allow the output node to settle after each transition. This arrangement is useful for redundant sensors, selectable thermistors, and factory calibration inputs where keeping the analog front end unchanged is valuable.

⚡

Precision Test and Measurement Routing

The MAX383CPE+ is useful in test systems that route one instrument or measurement channel to either of two inputs. Its two integrated SPDT switches reduce the number of separate packages and can maintain closely matched resistance between channels, with the manufacturer specifying less than 35Ω on-resistance and matching within 2Ω. The 3V to 15V supply range permits operation from a low-voltage bench system, while the 16-pin PDIP package is convenient for legacy or prototype fixtures. Engineers should use the common, normally open, and normally closed terminals exactly as shown in the data-sheet pin configuration and account for charge injection when the source impedance is high.

📱

Battery-Powered Data Acquisition

The MAX383CPE+ fits low-voltage battery-powered acquisition systems because it operates from 3V to 15V and supports dual supplies from ±3V to ±8V. Two SPDT channels can select between external inputs and internal calibration or reference paths without introducing a separate multiplexer package. The specified turn-on and turn-off times of 175ns and 100ns support rapid routing, although overall acquisition speed is more likely to be limited by the sensor and converter. Low-power designs should include the control logic in their power budget and verify the device's operating current under the selected switching state using the manufacturer electrical characteristics.

🏭

Bipolar Analog Signal Multiplexing

For bipolar instrumentation signals, the MAX383CPE+ can operate from dual supplies spanning ±3V to ±8V. Each SPDT channel routes its common terminal to either a normally closed or normally open input, allowing positive and negative signal sources to be presented to a shared downstream amplifier or converter. The matched on-resistance of the two channels, guaranteed within 2Ω, helps preserve differential or complementary signal balance. Because the switch adds resistance and introduces charge injection, precision designs should include the on-resistance in the signal-loss budget and validate settling time at the highest expected input impedance.

🖥️

Sample-and-Hold Signal Routing

A MAX383CPE+ SPDT channel can connect a source to a sample-and-hold capacitor or to a different discharge path, allowing the same acquisition circuit to select which signal is captured. The 100ns turn-off and 175ns turn-on specifications establish the device's switching contribution, while the less-than-35Ω on-resistance limits voltage attenuation from the source. The exact acquisition interval must also include amplifier settling, capacitor charging, leakage, and switch charge injection. For high-value sampling capacitors, keep the common and switched traces short and verify leakage limits in the manufacturer data sheet before finalizing the layout.

🏭

Industrial Control Signal Multiplexing

The MAX383CPE+ can select between two control or measurement paths in a compact industrial circuit while operating from 3V to 15V. Its commercial temperature specification of 0°C to +70°C is suitable for indoor or temperature-controlled equipment; extended-temperature requirements should use an appropriate MAX383 grade. The two SPDT channels allow independent routing within one package, while the through-hole PDIP-16 format supports repair and prototype assembly. Designers should define logic states when control inputs can float, protect signal pins from conditions beyond the manufacturer ratings, and place the device where through-hole lead stress and contamination are controlled.

Ringkasan Produk Disebarkan

MAX381CPE+ Maxim Integrated Dipergunakan di: Sensor Signal Selection, Precision Test and Measurement Routing, Battery-Powered Data Acquisition, Bipolar Analog Signal Multiplexing, Sample-and-Hold Signal Routing MAX385CPE+ Dual-DPST family member for paired signal switching Dipergunakan di: Sensor Signal Selection, Precision Test and Measurement Routing, Bipolar Analog Signal Multiplexing, Sample-and-Hold Signal Routing, Industrial Control Signal Multiplexing MAX383EPE+ Same-family dual-SPDT option for broader temperature operation Dipergunakan di: Sensor Signal Selection, Battery-Powered Data Acquisition, Industrial Control Signal Multiplexing MAX383APE+ Same-family wide-temperature sourcing option Dipergunakan di: Precision Test and Measurement Routing, Bipolar Analog Signal Multiplexing, Industrial Control Signal Multiplexing MAX383CPE Same-family ordering alternative Dipergunakan di: Battery-Powered Data Acquisition MAX383CPE++ Same electrical and package family alternative Dipergunakan di: Sample-and-Hold Signal Routing
What is the MAX383CPE+?
The MAX383CPE+ is a dual, single-pole double-throw CMOS analog switch with 35Ω maximum on-resistance in a 16-pin PDIP package. According to the Analog Devices product page, each switch contains one normally open and one normally closed pole. The device is intended for precision, low-voltage signal routing and is specified from 3V to 15V with commercial operation from 0°C to +70°C.
How many channels and poles does the MAX383CPE+ have?
The MAX383CPE+ contains two independent SPDT channels in one 16-pin package. An SPDT channel has one common signal terminal that connects to either a normally closed or normally open terminal. According to the manufacturer family description, the MAX383 includes two normally open and two normally closed poles, allowing each channel to select between two signal paths without adding a separate switch package.
What is the on-resistance of the MAX383CPE+?
The MAX383CPE+ has an on-resistance of less than 35Ω. According to the Analog Devices product page, the MAX383 family also guarantees channel-to-channel resistance matching within 2Ω and flat on-resistance over the operating signal range. This makes the device useful for paired or differential routing where similar resistance between channels helps preserve amplitude balance.
What voltage supply does the MAX383CPE+ require?
The MAX383CPE+ supports a 3V to 15V supply and can also operate with dual supplies from ±3V to ±8V. According to the manufacturer product-page specifications, this range supports low-voltage single-rail systems as well as bipolar analog circuits. The selected supply arrangement should match the signal amplitudes and logic levels used by the switching network.
How fast is the MAX383CPE+ analog switch?
The specified turn-on time is 175ns and the turn-off time is 100ns. These values come from the Analog Devices MAX383 product-page specifications and describe the device when operated under its stated test conditions. The timing is suitable for moderate-bandwidth instrumentation, test systems, sensor multiplexing, and other routing applications where sub-microsecond transitions are sufficient.
Where can I download the MAX383CPE+ datasheet?
The official MAX383 product page provides access to the manufacturer datasheet and technical documentation. Use the Analog Devices MAX383 page linked on this product page, then select the MAX381/MAX383/MAX385 data-sheet link. The family document covers electrical characteristics, switching configurations, timing, and package details for MAX383CPE+.
Where can I find the MAX383CPE+ pinout?
The MAX383CPE+ uses a 16-pin PDIP package, and the definitive pin assignments appear in the pin-configuration and ordering-information sections of the manufacturer data sheet. Use that pin-description table when assigning common, normally open, normally closed, control, ground, and supply connections. The package drawing identifies physical pin 1 and the counter-clockwise numbering used by the PDIP footprint.
MAX383CPE+ vs MAX381CPE+ - which switch fits the design?
The MAX383CPE+ is the better choice when either signal path must be selectable, because it provides two SPDT channels with normally open and normally closed poles. The MAX381 is a single-pole single-throw switch and therefore does not provide the same two-position routing. Both belong to the same low-voltage precision family, but their switch topology and usable board functions differ.
MAX383CPE+ vs MAX385CPE+ - which is the better dual switch?
The MAX383CPE+ is preferable for two independently selectable SPDT paths, while the MAX385 provides two double-pole single-throw switches. The MAX385 topology can switch paired signals together, whereas each MAX383 SPDT channel independently selects one of two terminals. The correct choice depends on whether the two routed signals must change positions simultaneously or independently.
When should I choose the MAX383CPE+ over the MAX381 or MAX385?
Choose the MAX383CPE+ when the design needs two independent 2:1 routing paths and benefits from closely matched channel resistance. Choose the MAX381 for a simpler single SPST function, or the MAX385 when paired, double-pole switching is required. The MAX383 is especially appropriate when selecting among two sources per channel while retaining the same 16-pin package format.
Is the MAX383CPE+ suitable for sensor multiplexing and test equipment?
The MAX383CPE+ is suitable for sensor multiplexing, signal selection, and general test-equipment routing because it combines two SPDT channels, 35Ω maximum on-resistance, and 175ns turn-on time. For high-impedance sensors, however, off-state leakage and charge injection must be checked against the required accuracy. The manufacturer data sheet should guide the final selection of external biasing and settling time.
What can replace the MAX383CPE+?
A valid replacement must use the same 16-pin PDIP footprint, preserve the two SPDT channels, and remain within the 3V to 15V supply range. Same-family MAX383 temperature-grade and ordering variants can provide drop-in sourcing options, but the complete suffix must be checked because the + marking changes ordering and compliance attributes. Verify pinout, control polarity, timing, leakage, and channel matching before substitution.
Is there a Maxim Integrated equivalent for the MAX383CPE+?
The MAX383CPE+ is already an Analog Devices product originating from the Maxim Integrated product line, so no manufacturer transition is required. Same-family MAX383 variants may offer different temperature grades or ordering codes while retaining the relevant package and pin configuration. Use the ordering-information table to confirm the exact commercial, extended-temperature, automotive, and compliance suffix needed for the assembly.
Where can I buy the MAX383CPE+ and check its lead time?
Use the Request a Quote form on this page to request MAX383CPE+ pricing, stock confirmation, and a current lead-time quotation. The manufacturer supports single-supply operation from 3V to 15V and dual-supply operation from ±3V to ±8V, but the commercial-order commitment can change. Provide your required quantity, tube packaging preference, and production schedule with the request.
What are the key specifications engineers should know about the MAX383CPE+?
The MAX383CPE+ is a 2-channel, 2:1 CMOS analog switch in a 16-pin PDIP package. According to the Analog Devices product page, key ratings include less than 35Ω on-resistance, channel matching within 2Ω, a 3V to 15V supply range, ±3V to ±8V dual-supply operation, 175ns turn-on time, 100ns turn-off time, and a 0°C to +70°C commercial temperature range.
How should the MAX383CPE+ be used in a precision analog circuit?
Use each MAX383 SPDT channel to select a common signal path between its normally closed and normally open terminals, and drive the control inputs from logic compatible with the selected supply arrangement. Keep traces short, provide defined control levels where required, and account for charge injection during transitions. For high-impedance nodes, verify leakage and settling against the manufacturer data sheet.

Data referensi kejuruteraan untuk MAX383CPE+ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MAX383CPE+ when the board needs two independent 2:1 analog selections, particularly for matched sensor, calibration, or test-signal paths. Its less-than-35Ω on-resistance, matching within 2Ω, 3V to 15V supply range, and PDIP-16 package make it suitable for low-voltage instrumentation and legacy through-hole assemblies. Choose MAX381CPE+ when only one SPST path is needed, or MAX385CPE+ when two paired signals must switch together through double-pole sections. MAX383EPE+ is the logical same-family choice when the commercial 0°C to +70°C range is insufficient, while MAX383APE+ supports a broader temperature environment. MAX383CPE and MAX383CPE++ retain the same core electrical configuration but require ordering and compliance review. Any substitute must preserve the PDIP-16 footprint, SPDT topology, control polarity, voltage ratings, leakage, charge injection, and timing.

Perbandingan dengan Gantian

Parametr Produk Ini MAX383EPE+ MAX383APE+ MAX383CPE MAX383CPE++ MAX383EPE
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package PDIP-16 PDIP-16 PDIP-16 PDIP-16 PDIP-16 PDIP-16
Number of Channels 2 2 2 2 2 2
Switch Configuration 2 x SPDT 2 x SPDT 2 x SPDT 2 x SPDT 2 x SPDT 2 x SPDT
On-Resistance Less than 35Ω Less than 35Ω Less than 35Ω Less than 35Ω Less than 35Ω Less than 35Ω
Supply Voltage Range 3V to 15V 3V to 15V 3V to 15V 3V to 15V 3V to 15V 3V to 15V
Dual Supply Voltage Range ±3V to ±8V ±3V to ±8V ±3V to ±8V ±3V to ±8V ±3V to ±8V ±3V to ±8V
Turn-On Time 175ns 175ns 175ns 175ns 175ns 175ns
Turn-Off Time 100ns 100ns 100ns 100ns 100ns 100ns
Operating Temperature Range 0°C to +70°C Extended temperature grade Extended temperature grade 0°C to +70°C 0°C to +70°C Extended temperature grade

Penyeberangsung Jelas

  • Two independently selectable SPDT channels in one package (vsMAX381CPE+)
  • Independent routing rather than paired double-pole switching (vsMAX385CPE+)
  • Matched channel resistance (vsMAX383CPE)
  • Through-hole assembly compatibility (vsMAX383ESE+)

Catatan Desain

Treat the MAX383 as a resistance in the signal path rather than an ideal switch. With on-resistance specified below 35Ω, attenuation becomes significant when the source impedance is high. Calculate the divider formed by the source and switch resistance, and include the input impedance of the following amplifier or converter. For precision paths, use both channels consistently because the manufacturer guarantees on-resistance matching within 2Ω.

Do not assume that the two SPDT channels switch simultaneously. The MAX383 provides two independent selectors, so control timing and post-switch settling must be coordinated when paired signals must arrive together. Allow the downstream circuit to settle after each transition, especially with high source impedance, long PCB traces, or large capacitance. Use the manufacturer timing and charge-injection characteristics when defining the acquisition interval.

Place the PDIP-16 device close to the routed signals to minimize trace capacitance and susceptibility to coupled noise. Keep the analog common and switched paths away from high-current switching nodes and clocks. Provide a low-impedance ground and supply return, decouple the supply according to the manufacturer recommendations, and use defined logic levels for control inputs so the switch cannot enter an indeterminate state during reset.

Operate the device only within its specified 3V to 15V supply range, or use a supported dual supply from ±3V to ±8V. Verify control-logic levels against the selected supply arrangement and include the MAX383 supply current in the system power budget. If an input can exceed the supply rails, add external protection or isolation rather than assuming the analog switch will tolerate the overvoltage.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The + ordering suffix identifies an ordering variant, but no explicit RoHS, REACH, halogen-free, or conflict-minerals statement was present in the accessible manufacturer page. Compliance must be confirmed for the exact assembled ordering code from the manufacturer's product documentation.

Data disahkan pada: 2026-11-19 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX383CPE+ datasheet MAX383CPE+ datasheet pdf MAX383CPE+ pinout MAX383CPE+ equivalent MAX383CPE+ replacement MAX383CPE+ vs MAX381CPE+ MAX383CPE+ vs MAX385CPE+ Analog Devices MAX383CPE+ MAX383CPE+ PDIP-16 pinout MAX383CPE+ analog switch application MAX383CPE+ price MAX383CPE+ stock

Komponen dan Tanda berkaitan

Analog Devices Maxim Integrated MAX383CPE+ MAX383 MAX381 MAX385 MAX383EPE+ MAX383APE+ MAX383CPE MAX383CPE++ MAX383EPE CMOS analog switch SPDT switch single-pole double-throw switch analog multiplexer interface IC semiconductor on-resistance channel matching turn-on time turn-off time PDIP-16 through-hole package low-voltage signal routing charge injection
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ