Analog Devices

MAX399CSE+ - Dual 4:1 Analog Multiplexer | Analog Devices

MPN: MAX399CSE+ ✓ Aktif
<100 ohm Rds(on) 16-pin SOIC Package
MOQ: 1 |

MAX399CSE+ Ringkasan

Analog Devices MAX399CSE+ is a precision, low-voltage CMOS analog multiplexer with two 4:1 switch circuits, on-resistance below 100 ohms, and a 16-pin SOIC package. The device routes low-voltage analog signals among multiple sources while supporting the audio-signal routing, data-acquisition, test-equipment, communication, guidance-and-control, and sample-and-hold applications identified by the manufacturer. The MAX399 family is also described as pin compatible with the industry-standard DG408, DG409, DG508A, and DG509A devices.

An analog multiplexer is a semiconductor switching device that connects one common signal path to one of several input or output terminals. The MAX399 uses two independent 4:1 circuits within one package, allowing two analog channels to be selected simultaneously. In the broader component hierarchy, it belongs to analog switches, then interface ICs, then semiconductor devices used to manage signal routing in electronic systems. The MAX399CSE+ therefore sits between the signal source and the downstream measurement or processing circuit.

The principal performance features include on-resistance below 100 ohms and channel matching within 6 ohms. The on-resistance remains flat over the specified analog signal range, helping preserve signal amplitude relationships when different channels are selected. The low-voltage CMOS construction supports portable, battery-powered, and low-voltage data-acquisition systems where power efficiency and compact routing are important. The dual-circuit organization also reduces the number of packages needed when two independently controlled selections are required.

The MAX399 family comprises precision monolithic multiplexers intended for precision analog routing rather than high-speed digital multiplexing. Its two 4:1 sections allow one common node to select among four signal paths per section. This arrangement is useful where several sources share a common amplifier, converter, measurement channel, or system bus. Because the device is monolithic, its channel matching can remain tighter than would typically be expected from separately assembled discrete analog switches.

Typical uses include audio-signal routing, automated test equipment, battery-powered instruments, communication systems, guidance and control systems, heads-up displays, low-voltage data acquisition, military radios, private-branch exchanges, and sample-and-hold circuits. In an automated test system, the MAX399CSE+ can place multiple inputs in sequence on a shared measurement path. In instrumentation, it can route control or sensor signals without duplicating the front-end amplifier. In communication equipment, the dual structure can support two simultaneous routing paths within a compact board layout.

For PCB design, use the manufacturer's pin-description table when assigning traces and keep analog routing paths short and appropriately shielded from switching and digital circuitry. Confirm that each selected source stays within the device's specified analog signal range and supply limits. The low on-resistance is useful for many low-voltage measurements, but system accuracy still depends on source impedance, leakage, switch timing, and the bandwidth requirements of the downstream circuit.

This page combines manufacturer application guidance, package and architecture details, drop-in cross-reference options, and practical selection guidance. It is intended to help engineers identify whether the MAX399CSE+ matches a required routing architecture and how its 16-pin SOIC footprint compares with established multiplexer families.

Pilihan pengganti yang segera untuk MAX399CSE+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MAX399CSE+ (sama faktor bentuk dan kaki) — berbeza dalam Package, On-Resistance, Multiplexer Configuration, Signal Direction.

Analog Devices
Package: 16-SOIC
On-Resistance: 100 ohm maximum
Multiplexer Configuration: 8:1
Bandingkan Dengan MAX399CSE+ →
Analog Devices
Package: 16-lead SOIC
On-Resistance: 100 ohm maximum
Signal Direction: Bidirectional
Bandingkan Dengan MAX399CSE+ →

MAX398CSE+

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 SOIC-16
8-channel single-ended multiplexing versus the MAX399CSE+'s two 4:1 circuits, using the same 16-pin SOIC footprint

📋 Alternatif rujukan (tidak dalam katalog)

DG408DY+

✅ Masuk Drop-In
Analog Devices
📦 SOIC-16
8:1 · 8 channels · 100 ohm maximum · 8 ohm maximum · 9 ohm maximum · Single 8-channel · Monolithic CMOS · TTL/CMOS-compatible

Hubungi untuk harga

Lihat Datasheet →

DG409DY+

✅ Masuk Drop-In
Analog Devices
📦 SOIC-16
2 circuits, each 4:1 · Dual differential 4:1 CMOS analog multiplexer · 100 ohm maximum · 8 ohm maximum · 9 ohm maximum · Bidirectional · TTL/CMOS-compatible · 16-lead SOIC

Hubungi untuk harga

Lihat Datasheet →

DG508ADY+

✅ Masuk Drop-In
📦 SOIC-16
8:1 channel organization versus the MAX399CSE+'s two 4:1 circuits; the manufacturer identifies the families as pin compatible

📋 Alternatif rujukan (tidak dalam katalog)

DG509ADY+

✅ Masuk Drop-In
📦 SOIC-16
8:1 channel organization versus the MAX399CSE+'s two 4:1 circuits; the manufacturer identifies the families as pin compatible

📋 Alternatif rujukan (tidak dalam katalog)

MAX399CSE+ Spesifikasi

Device Type Precision CMOS analog multiplexer
Number of Circuits 2 circuits
Multiplexer Configuration Dual 4:1
On-Resistance <100 ohm
On-Resistance Matching Between Channels <=6 ohm
Maximum On-Resistance Variation 11 ohm maximum
Channel Count 8 channels configured as two 4:1 circuits
Kemasan 16-pin SOIC
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin MAX399CSE+ 16-pin soic

Konfigurasi pin untuk MAX399CSE+ (16-pin soic pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 16-pin soic untuk MAX399CSE+

Tiada data garisan pin yang diperoleh untuk MAX399CSE+.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX399CSE+ patut untuk 6 aplikasis: Automated Test Equipment, Audio Signal Routing, Battery-Powered Instruments, Communication Systems, Guidance and Control Systems, Sample-and-Hold Circuits.

🏭

Automated Test Equipment

The MAX399CSE+ suits automated test equipment that must connect multiple analog test points to a shared measurement path. Its two 4:1 circuits can provide two independent selections within one 16-pin SOIC package, reducing routing complexity and component count. The less-than-100-ohm on-resistance and channel matching within 6 ohms help preserve relative signal amplitude across selections. During design, account for switching time and source impedance when defining measurement settling margins, and use the manufacturer's pin-description table to implement the select and enable controls correctly.

🎧

Audio Signal Routing

The MAX399CSE+ can route low-voltage audio signals among multiple sources in audio test and signal-conditioning equipment. Its two 4:1 sections allow independent routing of two related paths while maintaining a monolithic on-resistance match within 6 ohms between channels. This characteristic can help limit level changes when the system switches among sources. The design should still account for insertion resistance, source impedance, downstream amplifier loading, and the specified analog signal range to prevent avoidable attenuation or distortion.

🔋

Battery-Powered Instruments

The MAX399CSE+ is appropriate for battery-powered instruments requiring compact analog routing with low-voltage CMOS characteristics. Its 16-pin SOIC package combines two 4:1 switch sections, allowing one device to manage two selections instead of requiring separate multiplexers. On-resistance below 100 ohms and matching within 6 ohms support consistent signal transfer, although the complete power budget must include quiescent current, control-state current, and leakage. Check the manufacturer operating limits against the instrument's battery range and lowest valid signal level.

🌐

Communication Systems

The MAX399CSE+ can support analog signal selection in communication systems where multiple inputs feed a shared processing path. Two independent 4:1 sections provide flexible routing in a single 16-pin SOIC device, and the family is expressly associated with communication-system applications by Analog Devices. When choosing between mux families, compare insertion loss, off-state isolation, switching time, leakage, and supply requirements rather than using channel count alone. PCB traces connected to the selected analog nodes should remain short and be positioned away from high-energy switching nodes.

✈️

Guidance and Control Systems

The MAX399CSE+ is suitable for guidance and control systems that select several low-voltage analog command or feedback signals through a common interface. Its dual 4:1 organization allows two control paths to be multiplexed in one package, while on-resistance matching within 6 ohms helps maintain consistent control or measurement levels. Designers should verify settling behavior, allowable input levels, and control timing for the exact operating conditions. Use a defined ground and return strategy to prevent common-impedance effects from undermining the mux's channel-matching performance.

📺

Sample-and-Hold Circuits

The MAX399CSE+ can be used in sample-and-hold systems to place one of several analog inputs onto a shared sampling path. The MAX399 family's two 4:1 sections support selection of more than one source, and its on-resistance below 100 ohms can reduce insertion loss when source impedances are appropriately controlled. Performance still depends on the sampling capacitor, acquisition time, switch leakage, and input capacitance. Confirm settling at the lowest signal frequency and highest source impedance, and account for charge injection or acquisition-error behavior specified for the operating conditions.

Ringkasan Produk Disebarkan

DG408DY+ Analog Devices Dipergunakan di: Automated Test Equipment, Audio Signal Routing, Guidance and Control Systems DG409DY+ Analog Devices Dipergunakan di: Automated Test Equipment, Audio Signal Routing, Sample-and-Hold Circuits MAX398CSE+ Same-family 8-channel single-ended multiplexer Dipergunakan di: Automated Test Equipment, Audio Signal Routing, Battery-Powered Instruments, Guidance and Control Systems DG419DY+ Analog Devices Dipergunakan di: Battery-Powered Instruments DG508ADY+ Manufacturer-identified pin-compatible multiplexer family Dipergunakan di: Communication Systems, Sample-and-Hold Circuits DG509ADY+ Manufacturer-identified pin-compatible multiplexer family Dipergunakan di: Communication Systems
What is the MAX399CSE+?
The MAX399CSE+ is a precision, low-voltage CMOS analog multiplexer containing two 4:1 switch circuits in a 16-pin SOIC package. Analog Devices describes the MAX399 family as an 8-channel or dual 4:Channel device with on-resistance below 100 ohms. According to the manufacturer product page, its intended uses include audio-signal routing, automated test equipment, communication systems, low-voltage data acquisition, and sample-and-hold circuits.
What are the key specifications of MAX399CSE+ that engineers should know?
The MAX399CSE+ combines two 4:1 analog switching circuits, on-resistance below 100 ohms, and on-resistance matching within 6 ohms in a 16-pin SOIC package. Its on-resistance also remains flat across the specified analog signal range, with maximum variation of 11 ohms. According to the Analog Devices MAX399 product page, these characteristics support precision routing in automated test equipment, battery-powered systems, communication equipment, and low-voltage data-acquisition circuits.
Where can I download the MAX399CSE+ datasheet PDF?
The official MAX399 datasheet is available through the Analog Devices product page at https://www.analog.com/en/products/max399.html, where the manufacturer identifies the document as Data Sheet Rev. 6. The page provides the MAX399 documentation, product-selection information, sample-and-buy access, and related resources. Use the manufacturer pin-description table to verify signal assignments, control logic, supply connections, and the complete 16-pin SOIC layout before laying out a replacement board.
Where can I find the MAX399CSE+ pinout?
The MAX399CSE+ pinout is identified in the manufacturer datasheet linked from the official MAX399 product page. The device uses a 16-pin SOIC package, and engineers should use the datasheet pin-description table when assigning common terminals, selection inputs, enable controls, and supply pins. The cross-reference information confirms compatibility with established DG408, DG409, DG508A, and DG509A multiplexer arrangements, but signal-level validation should still be completed against the complete pin-description and operating tables.
What is the on-resistance of MAX399CSE+?
The MAX399CSE+ has an on-resistance below 100 ohms. The manufacturer datasheet description also states that the resistance is matched within 6 ohms between channels and remains flat over the specified analog signal range, with 11 ohms maximum variation. These figures are important when switch insertion resistance could affect signal attenuation or when comparing channels in a precision measurement system. Source impedance, downstream loading, and the selected supply condition still influence total system error.
How many analog channels does the MAX399CSE+ contain?
The MAX399CSE+ contains eight physical analog channels arranged as two independent 4:1 switching circuits. This means each section can select among four signal paths while the second section handles another selection. According to the Analog Devices product page, the family is described as an 8-channel or dual 4:Channel precision multiplexer. The dual arrangement is useful when a system must route two signals or two logical selections without using two separate multiplexer packages.
What can replace the MAX399CSE+?
Established drop-in candidates include the Analog Devices MAX398CSE+ and the Analog Devices MAX408DY+, MAX409DY+, MAX508ADY+, and MAX509ADY+ families identified by the manufacturer as pin-compatible with the MAX399. The alternatives differ in channel organization, so the correct replacement must preserve both the required 4:1 or 8:1 routing behavior and the control logic. Confirm the complete pinout, voltage limits, switching behavior, and signal range before production use.
Is MAX399CSE+ pin compatible with DG408 and DG409?
Yes, Analog Devices identifies the MAX399 family as pin compatible with the industry-standard DG408, DG409, DG508A, and DG509A devices. Compatibility means the established multiplexer families can be evaluated against the same board-level routing concept, but engineers should still compare supply voltage, control logic, channel architecture, leakage, switching time, and electrical limits. The SOIC-16 ordering variants are the relevant choices when the target PCB uses that footprint.
Is MAX399CSE+ suitable for low-voltage data acquisition?
The MAX399CSE+ is suitable for low-voltage data-acquisition routing because it is designed as a precision, low-voltage CMOS analog multiplexer with on-resistance below 100 ohms and channel matching within 6 ohms. Analog Devices explicitly identifies low-voltage data acquisition among the MAX399 applications. Accuracy in the finished system will also depend on source impedance, leakage, acquisition timing, reference quality, and the performance of the amplifier or converter connected to the selected common terminal.
Is MAX399CSE+ suitable for automated test equipment?
The MAX399CSE+ is suitable for automated test equipment because the manufacturer lists automated test equipment as a MAX399 application and the device provides two selectable 4:Channel sections. This topology can route several test points to a shared measurement front end while controlling two selections. In a production tester, account for the less-than-100-ohm on-resistance, channel matching within 6 ohms, switching time, and input capacitance when defining measurement margins and settling requirements.
When should I choose MAX399CSE+ over MAX398CSE+?
Choose the MAX399CSE+ when the circuit needs two independent 4:1 analog selections, while the MAX398CSE+ is the 8-channel single-ended member of the same precision family. The manufacturer lists both MAX398 and MAX399 as pin compatible with DG408, DG409, DG508A, and DG509A, but the multiplexer's channel organization remains the decisive distinction. Choose based on the required common-node topology and control behavior rather than package size alone.
MAX399CSE+ vs MAX398CSE+ - which is better for dual-signal routing?
The MAX399CSE+ is the better match for dual-signal routing because it provides two 4:1 circuits, whereas the MAX398CSE+ is an 8-channel single-ended multiplexer. According to the Analog Devices family description, MAX399 combines eight channels as dual 4:Channel sections, while MAX398 is organized as an 8-channel single-ended device. Choose MAX399CSE+ when two independent selections are required; choose MAX398CSE+ when one common node must select among eight sources.
What is the best Analog Devices equivalent for MAX399CSE+?
The closest same-manufacturer alternative is the MAX398CSE+ because it belongs to the same MAX398/MAX399 precision CMOS multiplexer family and is listed as compatible with the same industry-standard multiplexer families. Its architecture differs: MAX398 is an 8-channel single-ended mux, while MAX399 uses two 4:1 sections. For a direct function replacement, verify that the alternative's common-terminal arrangement and selection logic match the target board rather than relying on family similarity alone.
Where can I buy MAX399CSE+ online?
Use the Request a Quote form on this page to request MAX399CSE+ availability, order quantities, and current sourcing support. The manufacturer product page identifies the MAX399 as a production device, while current market availability and lead time can change by package, quantity, and date. Request the exact MAX399CSE+ ordering code so the quote reflects the 16-pin SOIC configuration rather than a different family member or package suffix.
What is the price of MAX399CSE+?
The current MAX399CSE+ price should be requested through the Request a Quote form on this page. Pricing can vary with order quantity, package configuration, market conditions, and availability, so a static figure would not reliably represent the current offer. The manufacturer lists a starting list price for the MAX399 family, but the quote request should be tied to the exact MAX399CSE+ ordering code and the required quantity.
What is the lead time and stock status for MAX399CSE+?
Request the current stock status, minimum order quantity, and lead time through the Request a Quote form on this page. The Analog Devices product page identifies MAX399 as production, but production status does not guarantee immediate inventory for every package and order quantity. A direct quote provides the most current confirmation for the exact MAX399CSE+ suffix and the volume required by the project schedule.
Does MAX399CSE+ meet RoHS and automotive qualification requirements?
The available product information does not establish the complete RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status of the MAX399CSE+. Do not infer automotive qualification from the MAX399's production status. Review the current manufacturer product page, material declaration, and quality documentation for the exact ordering code, and use AEC-Q100 qualification only when the manufacturer explicitly identifies a qualified variant.

Data referensi kejuruteraan untuk MAX399CSE+ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MAX399CSE+ when the board needs two independent 4:1 analog selections and can benefit from the family's monolithic precision characteristics. Its below-100-ohm on-resistance and matching within 6 ohms are useful when several low-voltage sources share a measurement or signal-conditioning path. Choose the MAX398CSE+ when one common node must select among eight sources. Consider DG408DY+, DG409DY+, DG508ADY+, or DG509ADY+ when an established industry-standard 8:1 arrangement and documented pin compatibility are preferred. In every case, package match alone is insufficient: verify channel topology, control truth table, supply range, switching time, leakage, signal range, and accuracy requirements. For a production redesign, use the exact ordering code and manufacturer pin table rather than assuming every 16-pin multiplexer is electrically interchangeable.

Perbandingan dengan Gantian

Parametr Produk Ini MAX398CSE+ DG408DY+ DG409DY+ DG508ADY+ DG509ADY+
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Multiplexer Architecture Dual 4:1 8:1 single-ended 8:1 8:1 8:1 8:1
Number of Independent Circuits 2 circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Total Signal Paths 8 paths 8 paths 8 paths 8 paths 8 paths 8 paths
Manufacturer Pin Compatibility MAX399 Same MAX398/MAX399 family Identified as pin compatible Identified as pin compatible Identified as pin compatible Identified as pin compatible

Penyeberangsung Jelas

  • Two independent 4:1 sections in one package (vsMAX398CSE+)
  • Manufacturer-supported industry-standard pin compatibility (vsDG408DY+)
  • Precision monolithic channel matching (vsDG509ADY+)
  • Compact dual-section routing (vsDG508ADY+)

Catatan Desain

Use the complete pin-description table in the manufacturer datasheet when assigning the 16-pin SOIC footprint. Keep the common analog terminals, selected inputs, control inputs, supply pins, and ground connection consistent with the intended circuit architecture. Because the MAX399CSE+ contains two 4:1 sections, trace both common nodes independently and verify that replacement-family control polarity and selection logic have been reviewed before populating an alternate device.

Treat the less-than-100-ohm on-resistance as part of the complete signal path rather than as an isolated specification. Calculate the total attenuation using the selected source impedance, switch on-resistance, and downstream input impedance. For precision measurements, also evaluate the stated matching within 6 ohms because a channel-to-channel resistance difference can create level error when source impedance is high. Use short analog traces and a quiet ground reference to minimize additional error.

Do not select a replacement solely because it uses a 16-pin SOIC package or because the family is described as pin compatible. The MAX399 uses two 4:1 circuits, while several established alternatives use an 8:1 arrangement. Confirm the common-node topology, selection truth table, enable behavior, supply limits, switching timing, leakage, and allowable analog range. Prototype the exact ordering code under worst-case source impedance, temperature, and supply conditions before releasing a replacement design.

Confirm the device's supply range, quiescent current, and control-state current against the complete datasheet before using the MAX399CSE+ in a battery-powered design. The low-voltage CMOS architecture is suited to portable equipment, but total power depends on supply voltage, enabled duration, leakage, and the resistance of the connected source network. Provide adequate local supply bypassing and maintain a low-impedance return path to reduce supply noise and common-mode effects at the analog nodes.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer product page identifies MAX399 as production, but the listed verification does not explicitly establish the required compliance declarations or automotive qualification. Review current manufacturer documentation for the exact ordering code before making a compliance claim.

Pencarian Berhubungan

MAX399CSE+ datasheet MAX399CSE+ pinout MAX399CSE+ datasheet pdf MAX399CSE+ specifications MAX399CSE+ SOIC-16 pinout MAX399CSE+ equivalent MAX399CSE+ replacement MAX399CSE+ vs MAX398CSE+ MAX399CSE+ price MAX399CSE+ stock Analog Devices MAX399CSE+ MAX399CSE+ low voltage data acquisition MAX399CSE+ automated test equipment MAX399 dual 4:1 multiplexer

Komponen dan Tanda berkaitan

Analog Devices MAX399CSE+ MAX399 MAX398CSE+ DG408DY+ DG409DY+ DG508ADY+ DG509ADY+ analog multiplexer analog switch interface IC precision CMOS dual 4:1 multiplexer 8-channel multiplexer on-resistance channel matching analog signal routing automated test equipment low-voltage data acquisition sample-and-hold circuit SOIC-16 surface mount semiconductor communication systems guidance and control systems
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ