MC14018BD - 5-Bit CMOS Johnson Counter | onsemi | SOIC-16
料号: MC14018BD ✓ 量产中MC14018BD 概述
A Johnson counter is a binary counter whose outputs change in a shifted sequence rather than following conventional binary counting order. Its feedback structure can implement stable divide-by-N counters when the selected output is returned to the clock or preset logic. This makes the MC14018BD useful in frequency division, sequence generation, timing, and control systems where a configurable count ratio is required.
The MC14018B family provides five asynchronously presettable and resettable counter stages. Preset is controlled through a logic-high preset-enable input, while reset provides a separate asynchronous clearing function. Synchronous counting occurs on the rising clock edge, allowing counter state to advance predictably under a defined clock source. The distinction between asynchronous control inputs and synchronous counting is important when designing reset, preset, or cascading behavior.
The five counter outputs expose intermediate states of the counting sequence. These outputs can be observed directly for state indication or connected according to the desired divide ratio. Because feedback logic determines the effective modulus, correct wiring and timing must be checked against the manufacturer’s counter configuration and truth-table guidance.
Typical uses include digital timing dividers, programmable sequence counters, clock-frequency division, industrial timing modules, and embedded control logic. The SOIC-16 surface-mount package supports compact PCB layouts, while the positive-edge clock architecture works naturally with rising-edge clock sources and standard CMOS control signals.
When laying out the circuit, keep clock and control traces short, provide a stable supply reference, and avoid routing sensitive counter outputs directly through long traces adjacent to high-switching nodes. Decoupling should follow the manufacturer’s recommended application guidance. Because preset and reset are asynchronous, their pulse widths and settling behavior should be reviewed before using them for short control pulses.
This product record combines the manufacturer function description, package and counter classification, sourcing fields, and practical implementation guidance. It also identifies compatible MC14018-family alternatives while clearly separating confirmed drop-in options from related parts that require different packages or function verification.
直接替换替代料: MC14018BD ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
MC14018BDG
✅ 直接替换📋 参考替代料(不在目录中)
MC14018BALDS
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
HCF4018BMY
✅ 直接替换📋 参考替代料(不在目录中)
MC14018BD 最大额定值与电气特性
| Product Type | Presettable divide-by-N counter |
| Logic Family | CMOS |
| Counter Architecture | 5-stage Johnson counter |
| Number of Counter Stages | 5 stages |
| Counter Output Width | 5 bits |
| Clock Edge | Positive-going edge |
| Counting Mode | Synchronous |
| Preset Function | Asynchronous |
| Reset Function | Asynchronous |
| Preset Enable Logic | Logic 1 |
| 封装 | 16-pin SOIC |
| 安装类型 | Surface mount |
MC14018BD 16-pin soic 引脚配置指南
MC14018BD(16-pin soic 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: MC14018BD.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC14018BD 适用于 6 应用s: Programmable Frequency Dividers, Industrial Timing Sequences, Digital State Generators, Clock and Pulse-Rate Conditioning, Embedded Control Sequencing, Laboratory and Test Equipment Timing.
Programmable Frequency Dividers
The MC14018BD fits programmable clock-division circuits because its five Johnson counter stages increment synchronously on each positive-going clock edge. Connecting the appropriate counter output into the feedback path establishes the divide-by-N behavior, while reset provides a deterministic starting state. This arrangement is useful for reducing a system clock into slower timing domains in control and sequencing logic. The five available stage outputs provide flexibility in selecting a modulus, but the feedback connection must match the manufacturer’s truth table. Engineers should also verify the maximum operating clock rate and account for propagation delays around the feedback path when operating near the device’s timing limits.
推荐
Industrial Timing Sequences
The MC14018BD is appropriate for industrial timing modules that require repeatable event sequencing rather than ordinary binary up-counting. Its Johnson-counter output sequence changes one state at a time, which can produce predictable one-hot-like sequences useful for stepper sequencing, duty-cycle generation, and multi-stage actuator timing. Synchronous positive-edge counting keeps state transitions aligned with a system clock, while asynchronous reset allows the sequence to be cleared immediately when a fault or emergency-stop condition occurs. Supply-voltage and temperature requirements should be checked for the installation environment before releasing the design.
推荐
Digital State Generators
The MC14018BD can generate a fixed sequence of digital states by observing or combining its five counter outputs. Because the internal architecture is a Johnson counter, the outputs advance through a shifted sequence, making the device suitable for cyclic state machines, relay or lamp progressions, and sampling controllers. The positive-going clock edge provides a clear point at which the state advances, and the separate asynchronous preset and reset inputs support initialization and rapid return to a known condition. Use the manufacturer’s functional diagrams to confirm which output combinations represent each valid state and to prevent unintended repeated states.
推荐
Clock and Pulse-Rate Conditioning
The MC14018BD is useful in clock-conditioning and pulse-rate reduction circuits that need a divided clock derived from a clean periodic input. The counter advances synchronously on the rising edge, so each selected feedback configuration defines a stable relationship between input and output transitions. This can create slower enable pulses, retriggerable timing intervals, or synchronization-enable signals for downstream logic. The design must preserve feedback-loop timing margin because counter propagation delay and external routing contribute to the maximum reliable operating frequency. Decoupling and grounded return paths should also be arranged to prevent clock-edge noise from disturbing adjacent control signals.
推荐
Embedded Control Sequencing
The MC14018BD supports embedded sequencing in a controller that must coordinate several discrete events over time. A microcontroller or programmable logic device can generate the clock and control reset or preset, while the MC14018BD advances through a five-stage Johnson sequence and provides multiple status outputs. This division of responsibility reduces timer and state-management effort in the controlling device. Because preset and reset are asynchronous, firmware should release them in a defined order that avoids a race with the clock edge. The selected output must also be checked against the required event order, particularly when cycling or restarting the sequence.
推荐
Laboratory and Test Equipment Timing
The MC14018BD can support repeatable timing windows and stepped test sequences in laboratory or test equipment. Its five outputs provide multiple observation points, allowing a designer to monitor different portions of one counting cycle without multiplying clock-generation circuitry. The synchronous count behavior makes the outputs convenient for synchronous test stimuli, while asynchronous reset supports fast initialization between measurements. For laboratory systems operating across a wide ambient range, confirm the device’s rated temperature range and supply limits from the official datasheet. Signal-integrity practices, including short feedback routes and local supply bypassing, remain important even when clock frequencies are moderate.
推荐
推荐产品汇总
工程参考数据: MC14018BD ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC14018BDG | MC14018BALDS | HCF4018BMY |
|---|---|---|---|---|
| Package | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 |
| Brand | onsemi | onsemi | onsemi | STMicroelectronics |
| Logic Family | CMOS | CMOS | CMOS | CMOS |
关键差异点
- Directly listed as a five-bit positive-edge divide-by-N counter (对比 HCF4018BMY)
- Same-family drop-in candidate with matching package and counter classification (对比 MC14018BDG)
- Five Johnson stages with separate asynchronous preset and reset (对比 MC14018BALDS)
设计说明
Keep the clock path and the selected counter-output feedback route short and isolated from analog or high-current switching paths. Johnson-counter feedback creates a closed timing loop, so added trace length reduces margin and can make operation sensitive to clock-edge noise. Route the five counter outputs according to the required state mapping, maintain a continuous ground reference beneath the device, and avoid stubs that act as unintended antennas.
Do not treat preset and reset as ordinary synchronous commands. The MC14018B family controls these functions asynchronously, so a pulse can change counter state independently of the clock. Define reset release relative to the clock source, observe the manufacturer’s pulse-width requirements, and ensure the preset-enable input is driven to a defined inactive level during ordinary counting. Miswired or floating feedback inputs can produce repeated states rather than the intended divide ratio.
Use a stable supply and place the local bypass capacitor close to the device’s supply and ground pins. Because switching-edge current flows through the supply loop, excessive loop area can couple clock noise into adjacent signals. Follow the manufacturer’s recommended decoupling network and avoid sharing long supply paths with high-current loads. Verify input-voltage tolerance and output-driving requirements against the load before finalizing the power architecture.
合规信息
No specific environmental or automotive compliance statements were included in the cited product and search records. Confirm the current declarations using the exact onsemi ordering code and manufacturer documentation.