Microchip Technology

MCP3302T-CI/SL - 13-Bit 2-Channel SPI ADC | Microchip

MPN: MCP3302T-CI/SL ✓ Aktif
4.5 V to 5.5 V Vdss 14-pin SOIC Package
MOQ: 1 |

MCP3302T-CI/SL Ringkasan

The Microchip Technology MCP3302T-CI/SL is a 13-bit successive-approximation analog-to-digital converter with two differential input channels, a 100 kHz conversion rate, and an SPI serial interface, housed in a 14-pin SOIC package. Its operating supply range is 4.5 V to 5.5 V, while the four analog inputs can be configured as two differential channels or four single-ended channels. These characteristics make the device suitable for sensor measurement, data acquisition, industrial monitoring, instrumentation, and embedded control systems.

An ADC is a semiconductor that converts an analog voltage into a digital code for processing, storage, display, or control. The MCP3302 belongs to the SAR ADC family, where a successive-approximation internal DAC and comparator progressively determine the input voltage. In the power-management IC hierarchy, this converter bridges analog sensor signals and digital embedded systems, while its SPI interface provides a compact means of transferring conversion results to a microcontroller.

The device provides 13-bit conversion resolution, two analog input channels, differential input support, and conversion rates up to 100 kHz. Differential operation rejects common-mode voltage and can improve measurement accuracy when the source is centered around a biased reference. The four single-ended inputs give additional flexibility for multiplexed measurements, while the SPI interface supports integration with embedded controllers without requiring a parallel data bus.

The MCP3302 architecture uses a successive-approximation conversion process with an internal sample-and-hold function. During conversion, the SAR logic drives an internal DAC through successive bit trials until the internal comparator matches the sampled input voltage. The resulting 13-bit code is transferred through the serial interface. Exact input impedance, acquisition time, reference requirements, and current consumption must be confirmed from the manufacturer datasheet before defining the input network or acquisition timing.

Typical uses include ratiometric pressure and temperature sensing, potentiometer position measurement, bridge-sensor instrumentation, industrial process monitoring, battery-powered remote data acquisition, and embedded control systems. The differential inputs are especially useful when a sensor output is referenced to a biased common-mode voltage. For low-level signals, careful grounding, reference filtering, and input-conditioning design remain essential because converter accuracy depends on the complete analog front end rather than on resolution alone.

For each SPI transaction, use the manufacturer timing diagram to account for CS setup, sample-and-hold acquisition, conversion time, SCLK frequency, and output-data timing. Place the reference and input bypass capacitors close to their associated pins, maintain a low-impedance ground return, and avoid routing sensitive analog inputs adjacent to fast SPI clock traces. The MCP3302 datasheet and pin-description table should be used as the authority for board design and firmware sequencing.

This page combines the exact MCP3302T-CI/SL package and interface details with a pin-compatible comparison, application guidance, and practical SPI interface considerations. It also identifies which specifications require direct confirmation from the manufacturer datasheet, helping engineers plan sensor acquisition before committing to PCB layout or embedded firmware.

Pilihan pengganti yang segera untuk MCP3302T-CI/SL — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MCP3302T-CI/SL (sama faktor bentuk dan kaki) — berbeza dalam Package, Converter Type, Digital Interface, Maximum Conversion Rate, Number of Input Channels.

Microchip Technology
Package: 8-pin SOIC
Converter Type: Successive-approximation ADC
Digital Interface: SPI-compatible serial interface
Microchip Technology
Digital Interface: SPI serial interface
Maximum Conversion Rate: 100 ksps

MCP3302-CI/SL

✅ Masuk Drop-In
Microchip Technology
📦 14-pin SOIC
13 bit · Successive-approximation (SAR) · 2 channels · 4 channels · 100 ksps · 5.5 V single supply · ±1 LSB maximum · ±2 LSB maximum

Hubungi untuk harga

Lihat Datasheet →

MCP3301T-BI/SN

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 14-pin SOIC
Successive-approximation ADC · 13 bit · 1 channel · Fully differential · SPI-compatible serial interface · 8-pin SOIC · Rectangular · Gull wing

Hubungi untuk harga

Lihat Datasheet →

MCP3201T-CI/SL

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-pin SOIC
Same 14-pin SOIC SPI ADC footprint, but 12-bit versus 13-bit resolution, a one-bit reduction

📋 Alternatif rujukan (tidak dalam katalog)

MCP3201T-I/SL

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-pin SOIC
Same 14-pin SOIC SPI ADC format, but 12-bit versus 13-bit resolution and a different orderable temperature suffix

📋 Alternatif rujukan (tidak dalam katalog)

MCP3202T-CI/SL

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-pin SOIC
Same 14-pin SOIC SPI ADC footprint, but 12-bit versus 13-bit resolution, a one-bit reduction

📋 Alternatif rujukan (tidak dalam katalog)

MCP3302T-CI/SL Penilaian maksimum & Ciri-ciri Elektrik

Converter Type 13-bit successive-approximation ADC
Number of Input Channels 2 differential input channels
Single-Ended Input Configuration 4 single-ended inputs
Maximum Conversion Rate 100 kHz
Supply Voltage Range 4.5 V to 5.5 V
Antaramuka SPI serial interface
Architecture SAR ADC
Kemasan 14-pin SOIC
Jenis Pemasangan Surface mount
Analog Input Type Differential
AEC-Q100 Qualification not_applicable

Konfigurasi Pin MCP3302T-CI/SL

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pin 1 CS — Chip-select input
Pin 2 CH0- — Differential input channel 0 negative input
Pin 3 CH0+ — Differential input channel 0 positive input
Pin 4 CH1- — Differential input channel 1 negative input
Pin 5 CH1+ — Differential input channel 1 positive input
Pin 6 VSS — Analog ground
Pin 7 VDD — Positive analog supply
Pin 8 DIN — Serial data input
Pin 9 SCLK — Serial clock input
Pin 10 DOUT — Serial data output
Pin 11 DNC — Not connected (per datasheet)
Pin 12 DNC — Not connected (per datasheet)
Pin 13 DNC — Not connected (per datasheet)
Pin 14 VREF — Positive reference input

Aplikasi Biasa

MCP3302T-CI/SL patut untuk 6 aplikasis: Industrial Sensor Acquisition, Battery-Powered Remote Monitoring, Pressure and Bridge Measurement, Instrumentation and Test Equipment, Potentiometer Position Measurement, Embedded Control Systems.

🏭

Industrial Sensor Acquisition

The MCP3302T-CI/SL fits industrial sensor acquisition because its two differential channels can measure balanced sensor outputs while rejecting common-mode noise present in factory environments. The 13-bit resolution provides 8192 codes across the selected input range, and the 100 kHz conversion rate supports multiple sampled measurements. A practical implementation would condition each sensor with an amplifier, protect the inputs, and route them to CH0+ and CH0- or CH1+ and CH1-. Differential wiring is valuable when the sensor output is centered around a biased reference rather than ground. Firmware should select the correct input configuration, wait for acquisition, and control CS and SCLK according to the manufacturer timing diagrams.

⚡

Battery-Powered Remote Monitoring

The MCP3302T-CI/SL is appropriate for battery-powered remote monitoring because Microchip identifies the MCP3302 as a low-power ADC designed for portable and remote data-acquisition systems. Its 4.5 V to 5.5 V operating range requires a compatible regulator or battery configuration, while the two differential channels reduce the need for separate analog front ends. A field sensor can drive one differential pair, with the second available for a second measurement or diagnostic input. Duty-cycling the converter and its support circuitry can reduce average energy use. The design should verify converter current, shutdown behavior, reference stability, and acquisition timing from the datasheet before estimating battery life.

⚡

Pressure and Bridge Measurement

The MCP3302T-CI/SL can digitize outputs from resistive bridge sensors used in pressure, force, and load measurement. Two differential inputs allow a bridge output to be measured relative to its excitation reference while a second channel can monitor a temperature or reference signal. The SAR converter's 13-bit result and 100 kHz rate are useful for slow mechanical measurements, while differential operation helps suppress excitation-related common-mode voltage. The analog front end still determines overall accuracy: use a regulated excitation source, matched input filtering, and a quiet reference arrangement. Firmware should perform offset and gain calibration against known sensor conditions before reporting engineering units.

🔧

Instrumentation and Test Equipment

The MCP3302T-CI/SL is suitable for compact instrumentation that must capture analog test points without allocating a parallel ADC bus. Its SPI interface reduces wiring between the converter and a controller, while two differential inputs support active or bridge-coupled measurements. At up to 100 kHz, the converter can acquire process-control and diagnostic signals faster than many slow sensor mechanisms require. A practical instrument would use separate analog and digital grounding strategies, bypass the reference and supply pins locally, and place the ADC close to the input connector. Firmware should retain signed or unsigned code interpretation consistently and preserve the manufacturer's timing intervals for acquisition and conversion.

🎛️

Potentiometer Position Measurement

The MCP3302T-CI/SL can measure resistive potentiometer or other divider-based position sensors when the divider is excited from the ADC supply and referenced accurately. The 13-bit resolution supports coarse position readings in control panels, actuator feedback, and laboratory equipment, although mechanical repeatability and reference stability may limit real accuracy. One differential channel can represent the divider wiper relative to a sensed reference potential, while another channel can monitor a second axis or diagnostic voltage. The input source impedance must be checked against the converter's acquisition requirements so that the sampling capacitor can settle. Add suitable filtering at the input, but keep the filter capacitance within the acquisition and charge-sharing constraints stated in the datasheet.

🖥️

Embedded Control Systems

The MCP3302T-CI/SL integrates naturally with embedded controllers that use SPI, making it appropriate for mixed-signal control boards with analog sensing and digital processing. A microcontroller can issue commands over CS and SCLK, receive the 13-bit result through the serial output, and apply calibration or threshold logic. The converter's 100 kHz maximum rate allows sampled feedback loops, although loop bandwidth must remain compatible with acquisition and SPI transaction latency. Keep the analog section away from processor clocks and switching supplies, provide local bypass capacitance, and use a separate reference arrangement if the system requires better stability than the supply rail can provide.

What is the MCP3302T-CI/SL?
The MCP3302T-CI/SL is a 13-bit, two-channel differential SAR analog-to-digital converter with an SPI interface and a conversion rate up to 100 kHz. According to the Microchip MCP3302 product page, the device operates from 4.5 V to 5.5 V and is packaged in a 14-pin SOIC. It is intended for sensor measurement, data acquisition, industrial monitoring, instrumentation, and embedded control systems.
How many ADC channels does the MCP3302T-CI/SL have?
The MCP3302T-CI/SL provides two differential input channels, equivalent to four single-ended inputs when the pins are configured appropriately. The distributor product descriptions identify it as a two-channel, 13-bit differential ADC. This arrangement lets one device measure two balanced sensor outputs or four signals referenced to a common ground, depending on the analog input configuration selected by the designer.
What is the resolution and conversion speed of MCP3302T-CI/SL?
The MCP3302T-CI/SL combines 13-bit resolution with a maximum conversion rate of 100 kHz. The listed specifications identify a successive-approximation architecture and 13-bit differential ADC. This performance is suitable for many industrial, instrumentation, and embedded-control signals while requiring the firmware to observe the datasheet timing for CS setup, acquisition, and conversion completion.
What is the difference between MCP3302T-CI/SL and MCP3302-CI/SL?
The MCP3302T-CI/SL and MCP3302-CI/SL are both 13-bit, two-channel MCP3302-family ADCs with SPI interfaces and 14-pin SOIC packages. Their listed functions are equivalent, but the orderable suffixes and production details must be checked against the manufacturer product page before substitution. The MCP3302T-CI/SL should be treated as the specified source of truth for a design, rather than assuming every un-suffixed family member has identical qualification or lifecycle terms.
What is the best drop-in replacement for MCP3302T-CI/SL?
The MCP3302-CI/SL is the closest documented same-family replacement candidate for the MCP3302T-CI/SL because both are 13-bit MCP3302 devices with differential inputs, SPI communication, and a 14-pin SOIC footprint. Confirm the exact pin assignments, temperature grade, qualification status, and lifecycle status in the Microchip datasheet before using it as a production replacement. Several older MCP320x-family parts are not true drop-ins because their resolution or channel arrangements differ.
Can MCP3301T-BI/SN replace MCP3302T-CI/SL?
The MCP3301T-BI/SN can be considered only after a detailed pin and function review because it is a one-channel MCP3301-family converter rather than a two-channel MCP3302. It uses a 14-pin SOIC package and an SPI interface, but channel count and some device-specific functions differ. It should not be described as a plug-in replacement without confirming that the unused second-channel pins are compatible and that the required measurements remain functional.
When should I choose MCP3302T-CI/SL over MCP3202T-CI/SL?
Choose the MCP3302T-CI/SL when 13-bit resolution is important, while considering the MCP3202T-CI/SL when 12-bit resolution is sufficient. Both devices belong to the Microchip low-power SPI ADC family and use a 14-pin SOIC format, but their resolution differs by one bit, or approximately 0.025% of full scale. The lower-resolution MCP3202 can simplify calculations when its quantization step meets the measurement requirement.
Is MCP3302T-CI/SL suitable for battery-powered data acquisition?
The MCP3302T-CI/SL is suitable for battery-powered and remote data-acquisition designs when its supply voltage and current match the available power budget. The manufacturer describes low power consumption as a core feature, while the listed operating range is 4.5 V to 5.5 V. Confirm the actual operating and conversion-dependent current in the datasheet before sizing a regulator, battery, or duty-cycled acquisition schedule.
How do I connect differential sensors to MCP3302T-CI/SL?
Connect each differential sensor across one CHx+ and CHx- pair, with the sensor common-mode voltage kept inside the converter's permitted input range. According to the Microchip MCP3302 product description, the device supports full differential inputs, which help reject common-mode noise when both sensor leads remain within the analog input limits. Use the pin-description table and input-range diagrams in the manufacturer datasheet for final polarity and common-mode calculations.
Where can I download the MCP3302T-CI/SL datasheet PDF?
The official MCP3302T-CI/SL technical resource is the Microchip MCP3302 product page, which links to the manufacturer datasheet and supporting documentation. The MCP3302T-CI/SL is a 13-bit differential ADC with SPI communication and a 14-pin SOIC package. Use the pin-description table, timing diagrams, and electrical characteristics from that documentation when assigning PCB nets and writing SPI routines.
Where can I find the MCP3302T-CI/SL pinout?
The MCP3302T-CI/SL pinout is found in the Microchip MCP3302 manufacturer datasheet, specifically the pin-description and connection diagrams. The device uses a 14-pin SOIC package with analog inputs, supply pins, serial-interface signals, and reference-related connections. Use the diagram matching the selected package rather than relying on the 14-pin count alone, and preserve the manufacturer's decoupling and analog-layout guidance.
What SPI clock and conversion timing should I use with MCP3302T-CI/SL?
The MCP3302T-CI/SL supports conversion rates up to 100 kHz, but SCLK frequency and transaction timing must still comply with the manufacturer timing diagram. Firmware should assert CS, allow the required input-acquisition interval, initiate the conversion, and read the result without violating minimum CS and clock timing. The maximum conversion rate alone does not establish the safe SCLK frequency for every board or sampling arrangement.
Where can I buy MCP3302T-CI/SL online?
Use the Request a Quote form on this page to ask for MCP3302T-CI/SL availability, order quantities, and current lead time. The exact MCP3302T-CI/SL is listed for the 14-pin SOIC package, so the order confirmation should preserve that suffix and avoid silently substituting a different channel, resolution, temperature, or packing variant.
What is the price of MCP3302T-CI/SL?
Current MCP3302T-CI/SL pricing is obtained through the Request a Quote form on this page. Submit the required quantity, target delivery date, and shipment destination for a current quotation. The structured pricing interface should be used rather than relying on a historical catalog price, because component pricing and availability can change independently of the device's technical specifications.
What is the lead time for MCP3302T-CI/SL?
The current MCP3302T-CI/SL lead time should be requested through the Request a Quote form on this page. Include the required order quantity, reel or tray packaging requirement, and production schedule. The device's technical characteristics establish suitability for the design, but they do not by themselves determine current factory backlog, allocation, or shipment timing.
Is MCP3302T-CI/SL in stock?
Stock for the exact MCP3302T-CI/SL should be confirmed through the Request a Quote form on this page. Include the required quantity and acceptable delivery date so the quotation reflects current inventory and replenishment conditions. Avoid treating a generic MCP3302-family result as confirmation of stock for the exact T-CI/SL orderable suffix.
What are the key specifications of MCP3302T-CI/SL that engineers should know?
The key MCP3302T-CI/SL specifications are 13-bit resolution, two differential input channels, four possible single-ended inputs, a 100 kHz maximum conversion rate, a 4.5 V to 5.5 V supply range, and an SPI interface in a 14-pin SOIC package. The Microchip product description identifies it as a low-power successive-approximation ADC intended for sensor measurement and remote data acquisition.
What can replace MCP3302T-CI/SL in an existing design?
The MCP3302-CI/SL is the leading same-family drop-in candidate because it retains 13-bit resolution, two differential channels, SPI communication, and the 14-pin SOIC footprint. A final replacement decision must verify pin names, operating and temperature ranges, and qualification requirements. MCP3201 and MCP3202 variants are lower-resolution functional options, not exact drop-in substitutes, and MCP3301 variants reduce the available channel count.

Data referensi kejuruteraan untuk MCP3302T-CI/SL — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MCP3302T-CI/SL when the design needs 13-bit resolution, two differential measurement channels, SPI communication, and a 14-pin SOIC footprint. The MCP3302-CI/SL is the closest same-family candidate for replacement, but the exact suffix, temperature grade, and lifecycle status should be confirmed before production release. Consider MCP3202T-CI/SL when 12-bit resolution is sufficient and lower conversion complexity is acceptable. MCP3201T-CI/SL and MCP3201T-I/SL reduce both resolution and channel count, so they fit only when those reductions do not affect the measurement. MCP3301T-BI/SN preserves 13-bit resolution but provides only one differential channel. For all candidates, verify exact pin compatibility, reference requirements, input ranges, acquisition timing, and qualification requirements; matching package dimensions alone does not guarantee functional interchangeability.

Perbandingan dengan Gantian

Parametr Produk Ini MCP3302-CI/SL MCP3301T-BI/SN MCP3201T-CI/SL MCP3201T-I/SL MCP3202T-CI/SL
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Resolution 13 bit 13 bit 13 bit 12 bit 12 bit 12 bit
Number of Differential Channels 2 channels 2 channels 1 channel 1 channel 1 channel 2 channels
Conversion Architecture SAR ADC SAR ADC SAR ADC SAR ADC SAR ADC SAR ADC
Serial Interface SPI SPI SPI SPI SPI SPI
Input Configuration Differential inputs Differential inputs Differential inputs Differential inputs Differential inputs Differential inputs
Orderable Suffix T-CI/SL CI/SL BI/SN CI/SL I/SL CI/SL

Penyeberangsung Jelas

  • Higher resolution than MCP3202T-CI/SL (vsMCP3202T-CI/SL)
  • Two differential channels instead of one (vsMCP3301T-BI/SN)
  • One-bit resolution advantage over MCP3201T-CI/SL (vsMCP3201T-CI/SL)

Catatan Desain

Place the MCP3302T-CI/SL close to the analog source and route CH0+, CH0-, CH1+, and CH1- away from SCLK, DOUT, and switching-node traces. Keep the analog ground connection short and follow the manufacturer's grounding guidance for VSS and the reference connection. Local bypass capacitors should connect directly to the relevant supply or reference pins with minimal loop area. This arrangement is important because a 13-bit converter can still deliver poor system accuracy when the analog traces pick up coupling from digital or switching circuitry.

Design SPI firmware around the manufacturer's minimum CS, acquisition, conversion, and clock timing values. Assert CS before starting the conversion sequence, allow the analog input to settle for the required acquisition interval, and then read the 13-bit result using the documented clock and data-edge convention. Do not infer a safe SCLK rate solely from the 100 kHz conversion-rate figure. Validate timing with an oscilloscope on the finished PCB, including trace delay, microcontroller output delay, and any level-shifting components.

Avoid treating a family member with the same SOIC pin count as an automatic drop-in replacement. The MCP3301-family candidates provide one differential channel rather than two, and the MCP3201/MCP3202 options reduce resolution by one bit. Confirm the exact pin functions, input ranges, reference arrangement, temperature grade, and qualification status in the manufacturer documentation. PCB changes may also be necessary if the replacement uses a different exposed-pad, reference, or supply arrangement.

Decouple VDD locally and provide a stable reference network for the analog conversion. If the reference is derived from VDD, verify that supply variation, temperature drift, and loading are acceptable for the required measurement accuracy; a dedicated reference may be preferable when the ADC output drives a precision measurement. Confirm reference bypass requirements and permissible reference current in the datasheet. Decoupling capacitance and any additional filtering should be selected so that the source impedance does not prevent complete sampling during the acquisition interval.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance attributes require confirmation from the manufacturer product documentation. AEC-Q100 is not applicable to this industrial analog converter.

Pencarian Berhubungan

MCP3302T-CI/SL datasheet MCP3302T-CI/SL specifications MCP3302T-CI/SL pinout MCP3302T-CI/SL datasheet pdf MCP3302T-CI/SL equivalent MCP3302T-CI/SL replacement MCP3302T-CI/SL price MCP3302T-CI/SL stock MCP3302 13-bit differential ADC MCP3302 2-channel 100kHz ADC MCP3302 14-SOIC pinout MCP3302T-CI/SL sensor measurement MCP3302T-CI/SL vs MCP3202T-CI/SL MCP3302 SPI acquisition circuit Microchip MCP3302T-CI/SL

Komponen dan Tanda berkaitan

Microchip Technology MCP3302T-CI/SL MCP3302-CI/SL MCP3301T-BI/SN MCP3201T-CI/SL MCP3201T-I/SL MCP3202T-CI/SL 13-bit ADC successive-approximation ADC SAR ADC analog-to-digital converter differential input single-ended input SPI 100 kHz 4.5 V to 5.5 V 14-pin SOIC SOIC package surface-mount package sensor measurement data acquisition industrial monitoring instrumentation embedded control sample-and-hold
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ