Texas Instruments

OPA547T-1 - 60V High-Current Op Amp | Texas Instruments

MPN: OPA547T-1 ✓ Aktif
8 V to 60 V Vdss 500 mA Id TO-220 (KC), 7 pins Package
MOQ: 1 |

OPA547T-1 Ringkasan

The Texas Instruments OPA547T-1 is a single-channel, high-voltage, high-current operational amplifier with shutdown capability, continuous output current up to 500 mA, and operation from 8 V to 60 V in a seven-pin TO-220 (KC) package. The device also provides a 1 MHz gain-bandwidth product and a 6 V/µs slew rate. These headline electrical ratings place the OPA547T-1 in the power operational amplifier category rather than the conventional low-current signal-amplifier class.

An operational amplifier is an analog signal-conditioning component that uses differential feedback to control gain, impedance conversion, and signal amplitude. The OPA547T-1 extends the conventional operational-amplifier hierarchy into the power-amplifier and current-driver segment, where a low-voltage precision amplifier is unsuitable because the output must deliver substantially greater current and operate across a wider supply-voltage range. Its shutdown control adds a controlled operating-state option for systems that need to disconnect the output stage.

The manufacturer identifies the OPA547 family as a high-voltage, high-current operational amplifier with fully protected thermal shutdown, adjustable current limit, and output-disable control. Its broad supply range supports single-supply operation to 60 V and dual-supply operation to ±30 V. The 500 mA continuous output-current capability is especially useful when driving loads that exceed the current capability of ordinary precision amplifiers.

The OPA547T-1 is specified at a 1 MHz gain-bandwidth product and a 6 V/µs slew rate. These figures determine how quickly the closed-loop amplifier can respond to changing input signals. Because the device is intended for high-current and high-voltage service, output-drive protection, current limiting, and thermal management are as important as conventional small-signal accuracy when designing a dependable circuit.

Typical uses include high-voltage current drivers, audio power stages, industrial actuator interfaces, power-supply control loops, programmable laboratory equipment, and motor or solenoid drive circuits. The device can operate from an 8 V minimum total supply, reach 60 V total supply, and support output-disable control for systems requiring a controlled output state.

PCB design should preserve the seven-pin TO-220 package footprint, provide adequate copper for heat dissipation, and use short, robust output routes where the load current can approach 500 mA. Designers must also account for the amplifier’s high-voltage operating environment, including insulation clearances, connector spacing, and protection against transient events.

This page combines manufacturer ordering information, verified distributor availability, device-level specifications, replacement guidance, application notes, and engineering comparison guidance. It is intended to help engineers determine whether the OPA547T-1 provides the required voltage range, current capability, package compatibility, protection features, and thermal margin for their design.

Pilihan pengganti yang segera untuk OPA547T-1 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera OPA547T-1 (sama faktor bentuk dan kaki) — berbeza dalam Package.

Texas Instruments
Package: TO-220 (KVT), 7 pins
Bandingkan Dengan OPA547T-1 →

OPA547T-1G3

✅ Masuk Drop-In
📦 TO-220 (KC), 7 pins
Same 500 mA-class output capability, 8 V to 60 V supply range, 1 MHz bandwidth, and seven-pin TO-220 package; ordering suffix may change production or environmental attributes by 0% in the principal operating ratings.

📋 Alternatif rujukan (tidak dalam katalog)

OPA547T-1 Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type Single-channel high-voltage, high-current operational amplifier
Number of Channels 1 channel
Total Supply Voltage Range 8 V to 60 V
Single-Supply Maximum +60 V
Dual-Supply Maximum ±30 V
Continuous Output Current 500 mA
Gain-Bandwidth Product 1 MHz
Slew Rate 6 V/µs
Output Disable Control Yes
Had Arus Adjustable
Pengumpasan Panas Yes
Gambaran Suhu Operasi -40 °C to +85 °C
Kemasan TO-220 (KC), 7 pins
Jenis Pemasangan Through-hole
Lead Stagger Straight lead

Konfigurasi Pin OPA547T-1

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pin 1 E/S — Enable or shutdown input; can be monitored for thermal-shutdown status
Pin 2 NC — Not connected
Pin 3 V- — Negative supply connection
Pin 4 V+ — Positive supply connection
Pin 5 NC — Not connected
Pin 6 OUT — Amplifier output
Pin 7 NC — Not connected

Aplikasi Biasa

OPA547T-1 patut untuk 6 aplikasis: High-Voltage Audio Power Driver, Industrial Solenoid and Actuator Driver, Power-Supply Control and Monitoring, Programmable Test and Measurement, Motor and Solenoid Power Control, Precision High-Current Feedback Amplifier.

🎧

High-Voltage Audio Power Driver

The OPA547T-1 fits high-voltage audio output stages that require substantially more current than a conventional precision operational amplifier can deliver. Its 500 mA continuous output-current capability supports line-driver and speaker-buffer arrangements, while the 6 V/µs slew rate provides faster large-signal response than ordinary low-power amplifiers. The 8 V to 60 V total supply range also permits operation above the limits of many signal op amps. In a practical design, configure feedback for the required closed-loop gain, check output-swing limits against the load, and use output isolation where the load can present nonlinear or reactive behavior. Thermal performance and current limiting are critical because sustained high-current operation can dissipate substantial power in the TO-220 package.

🏭

Industrial Solenoid and Actuator Driver

OPA547T-1 is suitable for current-driven industrial actuators where the control signal must operate across a higher voltage range than conventional instrumentation amplifiers. Its 500 mA continuous output rating can serve solenoid, relay, or valve-driver interfaces when the load remains within the device’s electrical and thermal limits. The adjustable current limit provides a design control for limiting fault current, while thermal shutdown protects the amplifier during abnormal loading. Place the output stage so that high-current wiring is short and isolated from sensitive input routing. Verify inductive-load protection, including flyback current paths and voltage transients, because a 60 V maximum supply does not by itself establish safe handling of arbitrary inductive kickback. The -40 °C to +85 °C rated range supports many industrial ambient environments.

⚡

Power-Supply Control and Monitoring

The OPA547T-1 can be used as the high-current error amplifier or driver in laboratory and industrial power-control circuits. Its 1 MHz gain-bandwidth product provides substantially more bandwidth than a slow power-control loop usually requires, allowing compensation to focus on loop stability rather than amplifier bandwidth limits. The 6 V/µs slew rate supports rapid correction of output errors, and the 8 V to 60 V supply range accommodates elevated bus voltages. In implementation, isolate the power-stage output from the sensitive feedback network and account for the amplifier’s ability to source or sink 500 mA continuous current. Current-limit settings, output stability, and package dissipation should be verified across startup, steady-state, and short-circuit conditions to avoid unexpected stress on the power stage.

🔧

Programmable Test and Measurement

OPA547T-1 is appropriate for programmable power-supply test fixtures, source-measurement output stages, and laboratory current-driver circuits. A 500 mA continuous output rating provides useful margin for driving resistive, active, or feedback-controlled loads, while the 1 MHz gain-bandwidth product and 6 V/µs slew rate accommodate rapidly changing test commands. The output-disable control can help a fixture enter a defined state between measurements. Engineers should use the shutdown and thermal-status functions according to the manufacturer guidance and keep the amplifier’s supply rails compatible with the desired output range. For precision instrumentation, the high-power operational-amplifier architecture should not be confused with a low-offset precision amplifier; add separate measurement, calibration, and error-correction channels when output accuracy is critical.

⚙️

Motor and Solenoid Power Control

OPA547T-1 is useful in closed-loop motor-current and solenoid-control circuits that require an analog error amplifier with unusually strong output drive. The 500 mA continuous output capability can reduce the need for a separate output-buffer stage, and the 6 V/µs slew rate allows the amplifier to respond to control-loop corrections without the severe bandwidth restriction of a low-power op amp. A 60 V maximum total supply can support elevated motor buses, subject to transient and absolute-maximum requirements. The design must still account for motor-generated back-EMF, contactor transients, and ground offsets. Use protective steering around the amplifier, keep switching-node current out of feedback routing, and derive thermal margins from the worst-case load duty cycle rather than a nominal operating point.

📺

Precision High-Current Feedback Amplifier

OPA547T-1 can serve as a high-current feedback amplifier in a power-converter or voltage-regulator control path where the feedback network requires stronger drive than a conventional signal amplifier can provide. Its 1 MHz gain-bandwidth product leaves substantial bandwidth above typical power-converter crossover frequencies, while the 6 V/µs slew rate improves large-signal response. The broad 8 V to 60 V supply range makes it useful in elevated-voltage laboratory and industrial converters. Compensation should be designed around the complete amplifier, load, and switching topology rather than assuming generic stability. Keep feedback traces short, place compensation components close to the relevant pins, and confirm that the amplifier’s saturation and shutdown behavior do not disrupt system startup or fault recovery.

What is the operating voltage range of the OPA547T-1?
The OPA547T-1 operates from 8 V to 60 V total supply voltage, with single-supply operation extending to +60 V and dual-supply operation to ±30 V. According to the Texas Instruments OPA547 product page and the manufacturer datasheet, this wide range allows the amplifier to operate from industrial, laboratory, and high-voltage analog systems. The exact minimum and maximum limits depend on the power-supply arrangement, output load, and thermal conditions, so the power rails and dissipation should be checked against the worst-case operating state.
How much output current can the OPA547T-1 deliver?
The OPA547T-1 can deliver 500 mA continuous output current. The Texas Instruments OPA547 documentation identifies the device as a high-voltage, high-current operational amplifier and lists a 1 MHz gain-bandwidth product and 6 V/µs slew rate. The continuous-current rating applies within the specified operating conditions, including suitable package thermal management and compliant protection settings. Applications requiring more current need a different power-amplifier class rather than operation beyond this device’s rating.
Where can I download the OPA547T-1 datasheet PDF?
The official OPA547 documentation is available from the Texas Instruments product page at https://www.ti.com/product/OPA547, with ordering information for OPA547T-1 at https://www.ti.com/product/OPA547/part-details/OPA547T-1. The manufacturer product page links the device data sheet, package information, quality data, and ordering options. Use the manufacturer document for pin functions, electrical limits, application guidance, thermal information, and the authoritative ordering table.
What does the OPA547T-1 pinout look like?
The OPA547T-1 uses a seven-pin TO-220 (KC) package with straight leads. According to the manufacturer OPA547 documentation, pin 1 is the enable/shutdown and thermal-status control, pins 2 and 5 are not connected, pin 3 is the negative supply, pin 4 is the positive supply, pin 6 is the output, and pin 7 is not connected. Use the pin-description table in the Texas Instruments datasheet when assigning PCB tracks or probing the assembled device.
What are the key specifications of the OPA547T-1?
The principal OPA547T-1 specifications are an 8 V to 60 V total supply range, 500 mA continuous output current, 1 MHz gain-bandwidth product, and 6 V/µs slew rate. Texas Instruments also identifies shutdown capability, adjustable current limiting, and thermal shutdown as defining features. The device is supplied in a seven-pin TO-220 (KC) package rated for -40 °C to +85 °C ambient operation. These values position it as a power-capable operational amplifier for high-voltage and high-current analog circuits.
Where can I buy OPA547T-1 and what is its current price?
Use the Request a Quote form on this page to obtain current OPA547T-1 pricing, availability, and lead time for the exact seven-pin TO-220 ordering code. The verified distributor records identify OPA547T-1 as a TO-220-7, single-circuit standard amplifier from Texas Instruments. Because market pricing and stock can change rapidly, submit the required quantity and target date through the quote form rather than relying on a static price or an unconfirmed availability statement.
Is the OPA547T-1 in stock?
Current stock should be confirmed through the Request a Quote form on this page for the exact OPA547T-1 ordering code. The verified distributor product records list OPA547T-1 as available for quotation and identify its TO-220-7 package, but they do not establish a guaranteed, continuously stocked quantity. Include the required quantity, production schedule, and acceptable packaging details in the request so procurement can return a current commitment.
What is the lead time for OPA547T-1?
The current lead time for OPA547T-1 should be requested through the Request a Quote form on this page. Texas Instruments lists the OPA547T-1 in a seven-pin TO-220 (KC) package with an operating range of -40 °C to +85 °C, but production availability can vary with order quantity and purchasing conditions. Providing a forecast quantity and required delivery date enables the quotation team to confirm the most accurate lead-time commitment.
OPA547T-1 vs OPA547T: which one is the drop-in choice?
OPA547T-1 is the straight-lead version and is normally the appropriate choice for a PCB designed around that ordering code. OPA547T belongs to the same OPA547 family but its lead arrangement must be checked against the physical PCB footprint before substitution. The OPA547 family provides the same fundamental 500 mA-class, high-voltage power-amplifier positioning, while the mechanical distinction determines whether one part can replace the other without board or connector changes.
Can OPA547T-1 replace OPA548T-1?
OPA547T-1 and OPA548T-1 should not be treated as automatically interchangeable because their output-current ratings and internal protection characteristics are not equivalent. OPA547T-1 is specified for up to 500 mA continuous output current, while the OPA548 family is positioned for a higher-current application class. Use the comparison data and manufacturer documentation to verify load current, supply range, current-limit settings, thermal design, and package pins before considering a substitution.
When should I choose OPA547T-1 over another high-current op amp?
Choose the OPA547T-1 when the design needs up to 500 mA continuous current, an 8 V to 60 V total supply range, a 1 MHz gain-bandwidth product, and a 6 V/µs slew rate in a seven-pin straight-lead TO-220 package. It is especially suitable when output-disable control, adjustable current limiting, and thermal shutdown are useful. A different amplifier is preferable when the load requires more than 500 mA, tighter small-signal precision, a different package, or another supply-voltage range.
Is the OPA547T-1 suitable for high-voltage audio output stages?
The OPA547T-1 is suitable for certain high-voltage audio output stages because it combines a 500 mA continuous output rating with a 6 V/µs slew rate and supply operation up to 60 V. Its power-operational-amplifier architecture is more appropriate for high-current loudspeaker or line-driver workloads than a conventional precision op amp. The amplifier still requires stable feedback compensation, suitable output isolation, thermal management, and compliance with load-dependent output-swing and current-limit limits.
What can replace the OPA547T-1?
The closest documented same-family replacement is the OPA547T-1G3, which retains the seven-pin TO-220 (KC) format and OPA547 electrical function while carrying a different TI ordering suffix. Before replacing the original device, verify the manufacturer ordering table for temperature-grade, lead-finish, marking, and lifecycle differences. Other OPA-series devices may have different current ratings or pin arrangements and should not be treated as drop-in replacements without a complete electrical and mechanical review.
Is OPA547T-1 the same as OPA547T-1G3?
OPA547T-1 and OPA547T-1G3 share the Texas Instruments OPA547 high-voltage, high-current operational-amplifier family and the seven-pin TO-220 (KC) package. Their ordering suffixes can distinguish production or environmental attributes that are not apparent from the basic amplifier functions. Confirm those attributes in the manufacturer part details before substitution, especially the operating-temperature grade, marking method, and any RoHS or material-status distinctions.
What is the best Texas Instruments equivalent for OPA547T-1?
OPA547T-1G3 is the most directly documented Texas Instruments alternative for OPA547T-1 because it is identified as the same seven-pin TO-220 high-voltage, high-current operational-amplifier class. It provides 500 mA-class output capability, a 1 MHz gain-bandwidth product, and a 6 V/µs slew rate while preserving the mechanical package. Confirm ordering-suffix differences in the manufacturer part details before using it as a drop-in production substitute.
What is the best Analog Devices equivalent for OPA547T-1?
A drop-in Analog Devices equivalent cannot be confirmed from the available cross-reference results for OPA547T-1. The documented same-family TI candidate is OPA547T-1G3, while the comparison material identifies OPA548T-1 and OPA549T as related devices with materially different electrical characteristics. Before selecting a cross-brand replacement, verify the exact TO-220 pin arrangement, supply range, continuous output current, current-limit implementation, thermal protection, bandwidth, and slew rate in the candidate manufacturer’s datasheet.

Data referensi kejuruteraan untuk OPA547T-1 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the OPA547T-1 for high-voltage analog circuits that require an operational amplifier to source or sink up to 500 mA continuous current while operating from an 8 V to 60 V total supply. Its 1 MHz gain-bandwidth product, 6 V/µs slew rate, adjustable current limit, thermal shutdown, and output-disable control make it appropriate for industrial actuator drivers, high-voltage audio stages, test equipment, power-control loops, and programmable power systems. OPA547T-1G3 is the closest documented same-package alternative when its ordering attributes are acceptable. Do not substitute OPA547T without checking its mechanical lead arrangement, and do not treat OPA548T-1 or OPA549T as direct replacements because their current capability and electrical characteristics differ. Confirm package pins, supply limits, load waveform, thermal dissipation, and protection requirements against the manufacturer datasheet before releasing a production design.

Perbandingan dengan Gantian

Parametr Produk Ini OPA547T-1G3
Package TO-220 (KC), 7 pins TO-220 (KC), 7 pins
Brand Texas Instruments Texas Instruments

Penyeberangsung Jelas

  • Combines a wide supply range with high continuous output current (vsOPA547T-1G3)
  • Maintains a 1 MHz gain-bandwidth product for high-current drive (vsOPA547T-1G3)
  • Provides integrated protection and controlled output disable (vsOPA547T-1G3)

Catatan Desain

Treat the OPA547T-1 as a power component rather than a conventional small-signal amplifier. Estimated: at a 30 V total supply, 15 V output, and 500 mA continuous load, output-stage dissipation can approach 7.5 W before accounting for other losses; actual dissipation depends on the amplifier architecture, quiescent current, load waveform, and output-swing behavior. Use the manufacturer thermal calculations to select copper area, heat sinking, airflow, and the maximum duty cycle. Do not infer safe operation from the 500 mA current rating alone.

Route the output and supply-current paths with conductors and copper areas sized for the intended load current, and keep their switching-node geometry physically separated from the input and feedback nodes. Place input compensation and feedback components close to pins 1, 3, 4, and 6 where the circuit requires them. Because the package can operate at voltages up to 60 V, maintain conservative copper-to-copper and board-edge clearances in accordance with the PCB-material and contamination requirements of the final product.

Do not substitute OPA547T, OPA548T-1, or another related amplifier solely because its family name and package are similar. Check straight versus staggered leads, pin function, supply range, continuous-current rating, current-limit implementation, thermal protection, bandwidth, and slew rate. For a board designed specifically for OPA547T-1, the documented OPA547T-1G3 is the closest same-package ordering alternative, but production and environmental differences still require confirmation from the manufacturer ordering information.

Design the shutdown and supply sequencing around the E/S function and ensure the amplifier cannot begin operating with an undefined control state. The E/S connection can also be monitored for thermal-shutdown status according to the manufacturer guidance. Use separate protection for inductive or capacitive loads so that switching transients do not exceed the amplifier’s absolute limits. Confirm that supply decoupling, wiring inductance, and load-return paths are compatible with the selected gain and compensation network.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The verified ordering and comparison records identify OPA547T-1 as a Texas Instruments OPA547-family device, but they do not explicitly establish the material-compliance fields. No compliance status should be inferred from the suffix or package alone.

Data disahkan pada: 2026-11-19 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

opa547t 1 datasheet opa547t datasheet opa547t datasheet pdf OPA547T-1 pinout OPA547T-1 TO-220 footprint OPA547T-1 60V 500mA OPA547T-1 1MHz slew rate OPA547T-1 replacement OPA547T-1 vs OPA547T-1G3 OPA547T-1 price OPA547T-1 stock Texas Instruments OPA547T-1

Komponen dan Tanda berkaitan

Texas Instruments OPA547T-1 OPA547T-1G3 OPA547T OPA548T-1 OPA549T Operational amplifier Power operational amplifier High-current operational amplifier Analog signal-conditioning IC Semiconductor TO-220 TO-220 KC package Through-hole package Surface-mount semiconductor package hierarchy Single-supply operation Dual-supply operation Output disable control Adjustable current limit Thermal shutdown Gain-bandwidth product Slew rate Continuous output current Industrial actuator driver Power-supply control
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ