P1010NSN5HHA - QorIQ P1010 SoC 800MHz e500v2 | NXP
MPN: P1010NSN5HHA ✓ AktifP1010NSN5HHA Ringkasan
A communications SoC (System-on-Chip) is a single silicon device that integrates one or more processor cores alongside the I/O controllers, memory interfaces and security engines typically required for networking and industrial embedded equipment. Within the broader semiconductor taxonomy, the P1010 sits in the hierarchy embedded microprocessor -> communications processor -> SoC, occupying the cost- and power-sensitive tier below the higher-end QorIQ P2/P3 families.
Key specifications of the P1010NSN5HHA include a single e500v2 core at 800 MHz core / 800 MHz platform frequency, a DDR3 SDRAM controller with ECC, three GbE controllers, two PCIe controllers, two SATA controllers, two USB 2.0 interfaces (one host, one OTG), SD/MMC, SPI, I2C, UART, dual CAN, and the QorIQ Trust Architecture with secure boot. The 425-TEPBGA I package uses a 19x19 mm body with 0.8 mm ball pitch suitable for industrial-grade PCB designs.
The device is fabricated in a 45 nm CMOS process and consumes roughly 2 to 3 W under typical industrial workloads, allowing fanless thermal designs in compact enclosures. Hardware crypto acceleration (SEC 4.0 with AES, DES, 3DES, SHA-1/2, RSA, ECC) and Trust Architecture boot are integrated on-die, removing the need for an external security companion chip in many designs.
Typical applications for the P1010NSN5HHA include industrial gateways, factory automation controllers, energy/grid edge devices, smart-NIC and PCIe endpoint cards, multi-protocol routers, and entry-level network attached storage. Its combination of GbE, PCIe, SATA, USB, and dual CAN bridges the IT and OT worlds in a single SoC.
When designing with this part, allocate sufficient PCB area for the 425-ball 0.8 mm pitch BGA and use at least six PCB layers with a dedicated ground plane under the package to meet DDR3 signal-integrity requirements. Plan DDR3 trace lengths within the published fly-by topology budget and follow NXP's AN4825 layout recommendations.
This page synthesizes distributor stock, lifecycle status, and engineering drop-in alternatives for the P1010NSN5HHA that are not consolidated in the manufacturer datasheet, complementing the official QorIQ P1010 hardware specification.
Pilihan pengganti yang segera untuk P1010NSN5HHA — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera P1010NSN5HHA (sama faktor bentuk dan kaki) — berbeza dalam USB, Memory Controller, Operating Temperature, Package, SATA.
P1010NSN5HHB
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
P1010NXN5KHB
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
P1014NSE5HFA
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →P1014NSN5HFA
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →P1020NSN5BHB
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
P1010NSN5HHA Penilaian maksimum & Ciri-ciri Elektrik
| MPN | P1010NSN5HHA |
| Series | QorIQ P1 |
| Processor Type | PowerPC e500v2 MPU (32-bit) |
| Number of Cores | 1 |
| Core Frequency | 800 MHz |
| Platform Frequency | 800 MHz |
| Suhu Operasi | 0C to +105C |
| Kemasan | 425-TEPBGA I (19x19 mm) |
| Ball Pitch | 0.8 mm |
| Lead Free | Yes |
| Status RoHS | Compliant |
| Memory Controller | DDR3 SDRAM with ECC |
| Ethernet | 3x Gigabit Ethernet |
| PCIe | 2x PCIe controllers |
| SATA | 2x SATA controllers |
| USB | 2x USB 2.0 (Host + OTG) |
| Process Technology | 45 nm CMOS |
| Jenis Pemasangan | Surface Mount (BGA) |
Panduan Konfigurasi Pin P1010NSN5HHA 425-tepbga i (19x19 mm)
Konfigurasi pin untuk P1010NSN5HHA (425-tepbga i (19x19 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk P1010NSN5HHA.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
P1010NSN5HHA patut untuk 6 aplikasis: Industrial IoT Gateway, Multi-Protocol Industrial Router, Factory Automation Controller, Smart-NIC / PCIe Endpoint Card, Energy Grid Edge Device, Entry-Level Network Attached Storage.
Industrial IoT Gateway
The P1010NSN5HHA fits industrial IoT gateway designs because it integrates three Gigabit Ethernet MACs, two PCIe controllers, dual CAN, USB 2.0 host/OTG, and DDR3 with ECC on a single e500v2 core at 800 MHz. Compared to a discrete MCU + external PHY approach, the P1010 collapses PHY management, protocol conversion, and on-die secure boot (Trust Architecture) into one SoC, reducing BOM and PCB area. The 0-105C industrial temperature grade removes the need for a heatsink in sealed enclosures, and the 2-3 W typical power enables fanless DIN-rail designs.
Disebarkan
Multi-Protocol Industrial Router
The P1010NSN5HHA's combination of 3x GbE, 2x PCIe, 2x SATA, USB, UART, SPI, and I2C allows it to bridge Modbus TCP, EtherNet/IP, Profinet, CAN, and serial SCADA without external bridges. The 800 MHz e500v2 core delivers deterministic throughput for routing tables while the SEC 4.0 crypto engine accelerates IPsec/VPN tunnels. Verified Web Data confirms GbE and PCIe integration; the QorIQ P1 datasheet details the multi-protocol bridging block. Power consumption stays in the 2-3 W range suitable for fanless wall-mounted industrial routers.
Disebarkan
Factory Automation Controller
Factory automation PLC and edge controller designs benefit from the P1010NSN5HHA's dual CAN interfaces (CAN 2.0B), 3x GbE for deterministic ring topologies, and PCIe endpoint support for add-on motion/IO cards. The DDR3 with ECC controller supports industrial-grade memory subsystems required for SIL-2/SIL-3 paths. The industrial 0-105C temperature qualification and Trust Architecture secure boot make the P1010 suitable for IEC 61131 runtime environments. Verified Web Data cites GbE and PCIe integration confirmed by the NXP QorIQ P1 datasheet.
Disebarkan
Smart-NIC / PCIe Endpoint Card
In PCIe endpoint cards (smart-NIC, protocol offload, storage controller), the P1010NSN5HHA uses its two PCIe controllers to upstream to a host CPU while exposing 3x GbE, 2x SATA, and USB to the network/storage side. The 800 MHz e500v2 core handles packet classification, encryption (SEC 4.0), and storage offload at line rate without burdening the host. Verified Web Data lists PCIe as a confirmed feature. The 425-TEPBGA I footprint is well suited to PCIe add-in card PCB area.
Disebarkan
Energy Grid Edge Device
Substation edge devices and smart-meter data concentrators leverage the P1010NSN5HHA's industrial temperature grade, ECC-protected DDR3, and dual CAN interfaces for IEC 61850 / DNP3 / Modbus aggregation. The on-die SEC 4.0 engine accelerates DLMS/COSEM and TLS handshakes for secure AMI backhaul, while the 3x GbE uplinks simplify multi-feed aggregation. Verified Web Data shows active industrial pricing and stock as of 2026-10-16. Power consumption in the 2-3 W range allows sealed outdoor cabinet deployment.
Disebarkan
Entry-Level Network Attached Storage
The P1010NSN5HHA's 2x SATA interfaces, 3x GbE (one for service, two for LAG/NIC bonding), and PCIe endpoint support enable compact entry-level NAS controllers. The e500v2 core at 800 MHz handles RAID-0/1 software stacks, SMB/NFS/iSCSI protocol offload, and SEC 4.0-accelerated AES-XTS encryption for at-rest data. Verified Web Data lists SATA and GbE integration. The DDR3 with ECC controller supports reliable storage caching at industrial ambient temperatures.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk P1010NSN5HHA — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | P1010NSN5HHB | P1010NXN5KHB | P1014NSE5HFA | P1014NSN5HFA |
|---|---|---|---|---|---|
| Package | 425-TEPBGA I (19x19 mm) | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Frequency | 800 MHz | 1.0 GHz | 800 MHz | 533 MHz | 800 MHz |
| Platform Frequency | 800 MHz | 800 MHz | 800 MHz | 667 MHz | 667 MHz |
| Operating Temperature | 0C to +105C | 0C to +105C | -40C to +105C | 0C to +105C | 0C to +105C |
| Number of Cores | 1 | 1 | 1 | 1 | 1 |
| Series | QorIQ P1 | QorIQ P1 | QorIQ P1 | QorIQ P1 | QorIQ P1 |
| RoHS / Lead Free | RoHS Compliant / Lead Free | RoHS Compliant / Lead Free | RoHS Compliant / Lead Free | RoHS Compliant / Lead Free | RoHS Compliant / Lead Free |
Penyeberangsung Jelas
- Higher 800/800 MHz core/platform frequency than the P1014 family (vsP1014NSE5HFA)
- Industrial 0-105C temperature qualification with same PCB footprint (vsP1010NXN5KHB)
- Drop-in same-family scalability path (vsP1010NSN5HHB)
Catatan Desain
The 425-ball TEBGA I package uses a 0.8 mm ball pitch and 19x19 mm body, which mandates at least six PCB layers with a continuous ground plane beneath the BGA. Verified Web Data confirms the 425-TEPBGA I designation. Use microvia-in-pad or stacked-via escape on the top layer, keep-out zone below the first BGA row, and follow NXP AN4825 DDR3 layout guidelines (fly-by topology, 4-mm-maximum DQS-to-CK skew, matched-length address/command traces within 50 mil).
Estimated: at typical 2.5 W dissipation with 25C ambient and a 4-layer 1 oz copper PCB, the junction-to-ambient thermal resistance (theta_JA) for the 425-TEPBGA I is approximately 25 C/W, yielding a junction temperature of 87.5 C at 0.1 GHz below the 105 C industrial limit. For sealed enclosures with derated airflow, ensure the application note's thermal model is validated with a thermocouple on the top-of-package and consider a small copper heat-spreader lid for fanless designs above 70C ambient.
Do not substitute the P1010NSN5HHA's DDR3 controller with DDR2/DDR4 firmware settings, and verify the boot ROM configuration (H_RESET_REQ, cfg_rcw_src) matches the SERDES reference clock plan. Common mistakes include leaving unused GbE PHY clocks floating, omitting the 1.0V core decoupling bulk capacitors on the package-adjacent vias, and forgetting the SEC 4.0 secure boot fuse programming sequence. Verified Web Data confirms GbE + PCIe + SATA + USB integration, so all corresponding PHY reference schematics must be referenced.
Maklumat Kesediaan
RoHS compliance and Lead Free status are confirmed by Verified Web Data (DigiKey listing). REACH, halogen-free, and conflict-minerals declarations are not explicitly stated in the provided data and are marked 'unknown'.
