Texas Instruments

PCA9518DBR - 5-Channel 400kHz I2C Hub | Texas Instruments

MPN: PCA9518DBR ✗ Akhir Hayat
3 V to 3.6 V Vdss SSOP (DB), 20 pins Package 400 kHz Speed
MOQ: 1 |

PCA9518DBR Ringkasan

The Texas Instruments PCA9518DBR is an expandable five-channel bidirectional I2C and SMBus buffer/hub operating from 3 V to 3.6 V at up to 400 kHz, supplied in a 20-pin SSOP (DB) package. It separates and buffers SDA and SCL lines into multiple downstream groups to help manage the 400 pF bus-capacitance limit defined for each I2C segment.

An I2C hub is a specialized interface IC within the broader hierarchy of I2C interface devices, bus buffers, digital interface controllers, and semiconductors. It is used when a controller must communicate with more devices or over a larger wiring distance than a single unbuffered I2C segment can support. By dividing the bus into electrically isolated segments, the PCA9518DBR helps preserve signal integrity while retaining the two-wire addressing model.

The principal features include five bidirectional downstream channels, a 3 V to 3.6 V operating range, 400 kHz operation, and expandable bus architecture. Each downstream side provides buffering for both clock and data, reducing the electrical loading imposed on the upstream controller. Expansion is possible by connecting additional compatible hubs in a tree arrangement, allowing designers to scale channel count without placing every peripheral on one long segment.

The device supports I2C and SMBus-style bidirectional communication because both protocols depend on wired-AND data lines and shared clock signaling. Buffering minimizes the DC and capacitive loading that would otherwise accumulate as device count and conductor length increase. Designers should still evaluate pull-up placement, rise-time requirements, signal levels, and the maximum permitted bus length for each individual segment.

Typical uses include sensor aggregation, industrial monitoring, test equipment, embedded control systems, and multi-board peripheral buses. The PCA9518DBR is especially useful where a microcontroller or processor must reach sensors, EEPROMs, interface converters, or other low-speed peripherals distributed across a larger assembly.

For PCB implementation, keep the upstream and downstream SDA and SCL paths short, place pull-up resistors at the electrically appropriate locations, and maintain a continuous ground reference between the hub and connected devices. Review the manufacturer datasheet for the exact pin assignment, enable behavior, propagation timing, and recommended input and output capacitance before releasing the layout.

This product page combines the core electrical and package characteristics with application guidance, design considerations, selection criteria, and confirmed replacement information. It helps engineers determine whether a buffered five-channel architecture is appropriate for a given I2C or SMBus topology without relying on raw catalog information alone.

Pilihan pengganti yang segera untuk PCA9518DBR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera PCA9518DBR (sama faktor bentuk dan kaki) — berbeza dalam Package, Product Type, Supply Voltage Range.

Texas Instruments
Package: 20-pin SSOP, 5.30 mm width
Product Type: Expandable five-channel bidirectional I2C/SMBus buffer and hub
Supply Voltage Range: 3 V to 3.6 V
Bandingkan Dengan PCA9518DBR →
NXP Semiconductors
Package: 20-pin TSSOP
Product Type: Expandable 5-channel I2C-bus hub
Supply Voltage Range: 2.3 V to 3.6 V
Bandingkan Dengan PCA9518DBR →

PCA9518DBT

✅ Masuk Drop-In
Texas Instruments
📦 20-pin SSOP (DB)
Expandable five-channel bidirectional I2C/SMBus buffer and hub · 5 channels · 3 V to 3.6 V · 400 kHz · 400 pF · Bidirectional · Open-drain · BiCMOS

Hubungi untuk harga

Lihat Datasheet →

PCA9518DBRG4

✅ Masuk Drop-In
📦 20-pin SSOP (DB)
Same PCA9518 electrical function and 20-pin SSOP (DB) package; green-compliant ordering suffix

📋 Alternatif rujukan (tidak dalam katalog)

PCA9518PW

✅ Masuk Drop-In
NXP Semiconductors
📦 20-pin SSOP (DB)
Expandable 5-channel I2C-bus hub · I2C and SMBus · BiCMOS · 2.3 V to 3.6 V · 5 channels · 400 kHz · VDD below 2.0 V · I2C-bus I/O pins remain high impedance

Hubungi untuk harga

Lihat Datasheet →

PCA9518DBR Spesifikasi

Device Type Expandable five-channel bidirectional I2C/SMBus buffer and hub
Number of Downstream Channels 5 channels
Tegangan Pemberi Arus Operasi 3 V to 3.6 V
Maximum I2C Bus Frequency 400 kHz
I2C Bus Capacitance per Segment 400 pF maximum
Buffered Signals Bidirectional SDA and SCL
Supported Protocols I2C and SMBus
Expansion Architecture Expandable hub topology
Package Type SSOP (DB), 20 pins
Package Pin Count 20 pins
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin PCA9518DBR 20 pins

Konfigurasi pin untuk PCA9518DBR (20 pins pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 20 pins untuk PCA9518DBR

Tiada data garisan pin yang diperoleh untuk PCA9518DBR.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

PCA9518DBR patut untuk 6 aplikasis: Industrial Sensor Aggregation, Multi-Board Embedded Control, Test and Measurement Systems, EEPROM and Memory Peripherals, IoT and Edge Sensor Nodes, Board-Level Peripheral Expansion.

🏭

Industrial Sensor Aggregation

The PCA9518DBR is appropriate when an industrial controller must connect several groups of sensors over one I2C or SMBus interface. Its five bidirectional downstream channels let the designer place related sensors on separate buffered segments instead of loading the controller with the combined capacitance of every device and cable run. The hub operates from 3 V to 3.6 V at up to 400 kHz, which suits low-speed measurement peripherals that comply with the bus specification. Keep each segment below the 400 pF limit, use appropriate pull-ups, and verify rise time after adding cable and connector capacitance. A common ground and careful isolation of each downstream group are necessary to preserve reliable communication across the assembly.

🖥️

Multi-Board Embedded Control

The PCA9518DBR can divide a multi-board embedded system into manageable I2C branches, making it useful when a processor must communicate with controllers, memory devices, and expansion cards distributed across a chassis. Five downstream channels provide a practical way to shorten individual traces and reduce the load presented to the upstream bus. Its bidirectional 400 kHz operation suits standard I2C and SMBus peripherals. The topology should be designed as a tree rather than a long daisy chain, with each branch checked for capacitance, pull-up placement, and fault propagation. Validate the complete system at the slowest expected bus rate because accumulated clock skew and weak signal rise time can limit otherwise compliant devices.

🔧

Test and Measurement Systems

A test instrument can use the PCA9518DBR to organize several low-speed control or measurement peripherals behind one host interface. The five buffered branches reduce the capacitive burden on the host controller and provide electrical separation between local devices, which is valuable when fixture wiring or cable length makes a single I2C segment impractical. The 3 V to 3.6 V operating range and 400 kHz speed align with many sensor, EEPROM, and low-speed interface components. Engineers should test the worst-case branch capacitance, account for pull-up resistor selection, and avoid adding excessive stub lengths. The result is a more structured fixture bus that can be expanded without loading every peripheral onto the same upstream segment.

💾

EEPROM and Memory Peripherals

The PCA9518DBR can organize multiple I2C EEPROM or other memory peripherals into separate buffered groups when the combined bus load would otherwise approach the protocol limit. The five downstream channels support a practical partition between devices while preserving one logical interface at the controller. Because memory components may have different address ranges, pull-up requirements, and access timing, each group should be characterized rather than treated identically. Place pull-ups where they can maintain the required rise time without overloading the hub output, and maintain short, controlled routing between the hub and each branch. Validate reads and writes at the intended clock rate with the production memory population and cable configuration.

🧩

IoT and Edge Sensor Nodes

The PCA9518DBR is useful in edge-computing and IoT assemblies where a central controller connects local sensors, transceivers, and configuration devices over I2C or SMBus. Its five downstream channels provide a straightforward way to split peripherals by function or physical location while operating in the 3 V to 3.6 V range. Buffered branches can improve scalability by limiting the load on the host controller, although each segment must still meet the 400 pF bus-capacitance rule. Low-power designs should also account for the hub's operating current and enable behavior, while firmware should handle unexpected bus-stuck conditions. Firmware should verify each branch during startup to simplify diagnosis of wiring or peripheral failures.

💡

Board-Level Peripheral Expansion

The PCA9518DBR can serve as an expansion point on a controller board that already has too many I2C targets for one practical bus segment. Connecting compatible hubs in a tree lets an engineer create five additional branches while retaining bidirectional SDA and SCL communication at up to 400 kHz. This arrangement can accommodate sensor banks, EEPROMs, and low-speed interface converters without redesigning the host processor. The design must preserve correct pull-up distribution and avoid placing pull-ups on every downstream node indiscriminately, since excessive resistance can slow edges while too little resistance increases the load. Review the hub's timing and enable specifications in the manufacturer datasheet, then verify the completed hierarchy with worst-case devices and cables.

What is the PCA9518DBR?
The PCA9518DBR is a Texas Instruments expandable five-channel bidirectional I2C and SMBus buffer and hub. According to the manufacturer datasheet, it operates from 3 V to 3.6 V at up to 400 kHz and provides five downstream channels for distributing SDA and SCL connections. Its 20-pin SSOP (DB) package is intended for surface-mounted PCB designs.
What are the key specifications of PCA9518DBR?
The PCA9518DBR provides five bidirectional downstream channels, a 3 V to 3.6 V operating range, and operation up to 400 kHz. According to the Texas Instruments datasheet, each I2C segment is organized around the protocol's 400 pF maximum bus-capacitance limit. The device uses a 20-pin SSOP (DB) package and supports expandable hub configurations.
Where can I download the PCA9518DBR datasheet PDF?
The official PCA9518 datasheet is available through the Texas Instruments product page at https://www.ti.com/lit/gpn/PCA9518. It contains the device description, electrical characteristics, application circuit, pin information, and ordering details for PCA9518DBR. Use the ordering-information table to confirm that the DB package and 20-pin configuration match the PCB footprint.
Where can I find the PCA9518DBR pinout?
The PCA9518DBR pinout is shown in the pin-configuration and pin-functions tables of the official Texas Instruments PCA9518 datasheet. The part uses a 20-pin SSOP (DB) package, but the exact terminal names and signal directions must be taken from the manufacturer diagram rather than inferred from the package outline. Follow the numbering printed on the package when making PCB connections.
How does the PCA9518DBR improve an I2C bus?
The PCA9518DBR improves a large I2C or SMBus network by dividing it into buffered downstream segments. The manufacturer explains that the protocol normally limits a bus to 400 pF, while the hub separates SDA and SCL into groups that can each be designed within that limit. Buffering reduces loading on the upstream controller and supports a tree-style expansion of connected peripherals.
Can PCA9518DBR be used with SMBus devices?
Yes, the PCA9518DBR supports both I2C and SMBus applications. According to the Texas Instruments datasheet, its five downstream channels buffer bidirectional SDA and SCL connections, matching the shared-clock, bidirectional-data arrangement used by these buses. The host must still support the connected SMBus device addresses and any required PEC or other SMBus-specific protocol behavior.
What is the difference between PCA9518DBR and PCA9518PW?
The PCA9518DBR is supplied in a 20-pin SSOP (DB) package, while the cross-reference listing identifies PCA9518PW in a different 20-pin package. Both are associated with the PCA9518 five-channel hub family, but package body dimensions and lead geometry must be compared before PCB interchange is considered. PCA9518PW should not be treated as a drop-in substitute without a footprint and pin-compatibility review.
Is PCA9518DBR suitable for multi-board sensor systems?
The PCA9518DBR is suitable for multi-board sensor systems when each downstream I2C segment remains within its specified electrical limits. Its five buffered channels can serve separate groups of sensors, transceivers, memory devices, or interface converters. This topology can shorten individual runs and reduce loading, but common-ground integrity, pull-up placement, bus rise time, and connector wiring still require careful validation.
When should I choose PCA9518DBR instead of PCA9548ADBR?
Choose PCA9518DBR when the design requires a five-channel bidirectional buffer and hub intended to segment 400 kHz I2C or SMBus traffic. PCA9548ADBR is associated with a different multiplexing function and channel count, so it should not be assumed to be pin-compatible. Choose the multiplexer only after verifying its electrical architecture, addressing, and package against the actual PCB requirements.
What is the best drop-in replacement for PCA9518DBR?
No confirmed drop-in replacement for PCA9518DBR is established by the available manufacturer and cross-reference records. PCA9518PW uses a different package, and PCA9548ADBR performs a different multiplexing function, so neither qualifies as a same-footprint replacement. Request lifecycle and migration guidance from Texas Instruments before assigning a substitute, particularly because the PCA9518 family is approaching end-of-life.
Can PCA9518DBR replace PCA9518PW?
No drop-in replacement should be assumed between PCA9518DBR and PCA9518PW because their package styles differ. The PCA9518DBR uses the 20-pin SSOP (DB) package, while PCA9518PW uses the TSSOP-style PW package. Confirm land pattern dimensions, pin numbering, exposed thermal-pad requirements, and signal functions before considering either part for the other footprint.
Where can I buy PCA9518DBR online?
Use the Request a Quote form on this page to ask about PCA9518DBR availability, order quantity, and delivery. The manufacturer product page and authorized component channels can confirm lifecycle status and current sourcing conditions. Because the PCA9518 family is approaching end-of-life, include your planned build quantities and last-time-buy requirements in the request.
What is the price of PCA9518DBR?
The current PCA9518DBR price depends on order quantity, package quantity, and lifecycle availability. Use the Request a Quote form on this page for a current quotation and quantity-break review. A starting-price listing does not include the exact quantity-break pricing required for a production BOM, so it should not be used as the procurement price.
What is the lead time for PCA9518DBR?
Lead time for PCA9518DBR depends on remaining factory inventory and the quantity requested. Use the Request a Quote form on this page to state your required quantities and target delivery date. Because lifecycle transition can materially affect availability, request a written allocation and delivery schedule before committing the component to a production schedule.
Is PCA9518DBR in stock?
Current stock status for PCA9518DBR can change quickly as the device approaches end-of-life. Use the Request a Quote form on this page and specify your required quantity, target date, and acceptable packaging configuration. The response should confirm the lot-specific availability rather than relying on a catalog stock indicator alone.

Data referensi kejuruteraan untuk PCA9518DBR — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose PCA9518DBR when a 3 V to 3.6 V system needs a five-channel bidirectional buffer that separates 400 kHz I2C or SMBus traffic into manageable downstream segments. It is particularly useful when the combined capacitance of sensors, EEPROMs, transceivers, connectors, and wiring would make one unbuffered segment impractical. PCA9518PW may serve similar bus-splitting functions, but its PW package requires a different footprint and therefore should be selected for a new PCB rather than treated as a drop-in replacement for PCA9518DBR. PCA9548ADBR addresses a different multiplexing need and should be considered only when its channel count, addressing, and electrical operation match the design. For existing PCA9518DBR boards, request lifecycle and migration guidance from Texas Instruments before changing the footprint or function.

Perbandingan dengan Gantian

Parametr Produk Ini
Package 20-pin SSOP (DB)
Brand Texas Instruments
Device Function Five-channel bidirectional I2C/SMBus buffer and hub
Number of Downstream Channels 5 channels
Operating Supply Voltage 3 V to 3.6 V
Maximum I2C Bus Frequency 400 kHz
I2C Bus Capacitance per Segment 400 pF maximum
Buffered Signals Bidirectional SDA and SCL
Protocol Support I2C and SMBus
Expandability Yes

Penyeberangsung Jelas

  • Five independently buffered downstream channels (vsPCA9518PW)
  • Purpose-built I2C and SMBus segment buffering (vsPCA9548ADBR)
  • Supports expandable tree-style bus topologies (vsPCA9548ADBR)

Catatan Desain

Route each downstream SDA and SCL branch as a short, controlled trace from the corresponding hub output, and keep both branches away from noisy switching nodes. The manufacturer describes 400 pF as the maximum I2C bus capacitance for a segment, so calculate trace, device, and connector capacitance before finalizing the layout. Preserve a continuous ground reference across the hub and all connected peripherals.

Select pull-up resistors from the complete bus capacitance, clock rate, and rise-time requirement rather than copying one resistance across every branch. Overly strong pull-ups increase hub output current, while excessively weak pull-ups can produce slow SCL or SDA edges. Confirm that each downstream segment meets the I2C timing limits with the slowest intended clock, the highest operating voltage, and the production load population.

Build the network as a tree with one upstream connection and separate downstream branches; avoid long daisy-chained runs that place multiple devices in the same electrical segment. Keep the PCA9518DBR close to the point where the bus divides so the upstream controller sees only one buffered branch. Review the pin-configuration diagram in the manufacturer datasheet before assigning PCB nets to the 20-pin SSOP footprint.

Do not treat PCA9518PW or PCA9548ADBR as automatic substitutes for PCA9518DBR. The former has a different package style, while the latter has a different multiplexing architecture and channel count. A valid migration requires matching package dimensions, pin functions, voltage levels, timing, bus topology, and lifecycle requirements. Obtain lifecycle guidance directly from the manufacturer before committing a replacement to production.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The product listing provides quality and ordering information but does not state a specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not stated for this product.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

PCA9518DBR datasheet PCA9518DBR pinout PCA9518DBR datasheet pdf PCA9518DBR equivalent PCA9518DBR replacement PCA9518DBR price PCA9518DBR stock Texas Instruments PCA9518DBR PCA9518DBR 5 channel I2C hub PCA9518DBR 400kHz SSOP-20 PCA9518DBR vs PCA9518PW PCA9518DBR vs PCA9548ADBR PCA9518DBR I2C application circuit where to buy PCA9518DBR PCA9518DBR lead time

Komponen dan Tanda berkaitan

Texas Instruments PCA9518DBR PCA9518 PCA9518PW PCA9548ADBR I2C SMBus I2C hub I2C buffer SMBus buffer bidirectional buffer digital interface IC bus buffer semiconductor 3 V to 3.6 V 400 kHz 400 pF SDA SCL five-channel bus expansion SSOP-20 DB package surface-mount package RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ