NXP Semiconductors

PCA9555BSHP - 16-Bit I2C I/O Expander | NXP | HVQFN-24

MPN: PCA9555BSHP ✓ Aktif
5.5 V Vdss 24-HVQFN (4 x 4 mm) with exposed pad Package 400 kHz Speed
MOQ: 1 |

PCA9555BSHP Ringkasan

The NXP Semiconductors PCA9555BSHP is a 16-bit I2C-bus and SMBus I/O expander with an interrupt output, operating at bus speeds up to 400 kHz and supporting a maximum supply voltage of 5.5 V. The device is offered in a 24-HVQFN package measuring 4 x 4 mm and is supplied in tape-and-reel packaging. Its 16 port pins can be configured individually as inputs or outputs, allowing a host microcontroller to monitor external signals and control LEDs, relays, or other digital loads through one serial interface.

An I/O expander is an interface IC that increases the number of general-purpose digital input and output pins available to a host processor. The PCA9555BSHP occupies the level between a microcontroller and the discrete GPIO circuitry connected to it: the controller communicates over I2C or SMBus, while the expander converts eight register bits into eight outputs or reads back eight inputs. The integrated interrupt output reduces the need for continuous bus polling when an input changes state.

Three hardware address pins, A0, A1, and A2, select the fixed I2C-bus address of the device. According to the NXP product page, as many as eight PCA9555 devices can share one bus when the address pins are configured differently. The PCA9555 also uses the same fixed bus address as the PCA9554, allowing the two device types to coexist on a bus in combinations that do not produce an address conflict.

The 5.5 V maximum operating voltage and 400 kHz bus capability suit compact control boards, industrial modules, test equipment, and consumer accessories. The NXP part is identified with a 24-HVQFN exposed-pad package, which keeps the footprint compact while providing a thermal and electrical connection to the PCB ground plane. The exact exposed-pad construction and recommended land pattern should be taken directly from the manufacturer datasheet and package drawing.

Designers should confirm the I2C pull-up resistance, address-strapping levels, output-drive requirements, and exposed-pad connection in the manufacturer datasheet. Because this device expands ports rather than providing level shifting, its VDD and VSS pins must match the logic environment used by the host and attached peripherals. Care is also required when connecting outputs to loads that source current independently.

Pilihan pengganti yang segera untuk PCA9555BSHP — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

PCA9555BSHP Spesifikasi

Device Type 16-bit I2C-bus/SMBus I/O expander with interrupt
Number of I/O Ports 16 ports
Maximum I2C Bus Frequency 400 kHz
Standard Bus Frequency 100 kHz
Maximum Supply Voltage 5.5 V
Address Configuration 3 hardware address pins (A0, A1, A2)
Maximum Devices per Bus 8 devices
Bus Compatibility I2C-bus and SMBus
Interrupt Output Yes
Kemasan 24-HVQFN (4 x 4 mm) with exposed pad
Package Pin Count 24 pins
Jenis Pemasangan Surface mount
Shipping Format Tape and reel

Panduan Konfigurasi Pin PCA9555BSHP 24 pins

Konfigurasi pin untuk PCA9555BSHP (24 pins pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 24 pins untuk PCA9555BSHP

Tiada data garisan pin yang diperoleh untuk PCA9555BSHP.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

PCA9555BSHP patut untuk 6 aplikasis: Microcontroller GPIO Expansion, Industrial Control and Status Panel, LED and Relay Control, Battery-Powered Sensor Node, Test and Measurement Equipment, Networking and Communications Module.

🧩

Microcontroller GPIO Expansion

The PCA9555BSHP adds 16 configurable digital ports to a microcontroller or system-on-chip that has too few direct GPIO pins. The host writes direction, polarity, and output registers over I2C or SMBus, then reads the input register when the interrupt line indicates a change. At the 400 kHz maximum bus rate, command traffic is compact for a device with 16 ports. Its 4 x 4 mm HVQFN package also saves board area compared with a discrete bank of 16 GPIO components. The design should treat the interrupt line as an event request, not as the complete source of port state, because the firmware must still perform a register read to identify which input changed.

🏭

Industrial Control and Status Panel

A 16-bit expander is well suited to industrial control panels where limit switches, status lamps, relay enables, and alarm lines would otherwise consume many controller pins. The PCA9555BSHP supports I2C or SMBus operation up to 400 kHz, while the A0, A1, and A2 inputs permit multiple expanders to share one bus. Using the interrupt output, the controller can react to a changed input rather than repeatedly reading all 16 ports. For industrial environments, confirm the exact temperature grade and isolation requirements, and use appropriate board-level protection for external wiring because the expander pins are not inherently isolated surge inputs.

⚡

LED and Relay Control

The PCA9555BSHP can drive LED indicators, relay-control signals, and other digital loads when the chosen output configuration meets the load current and polarity requirements. Sixteen outputs allow a single bus device to replace separate driver circuitry for multiple indicators. Because the interrupt and address functions are provided in the same compact package, the design can also monitor switch states alongside controlling outputs. Engineers should verify output sink and source ratings in the manufacturer datasheet, account for inductive loads with appropriate suppression, and avoid driving a relay coil directly unless the device's specified output limits permit the peak current.

🔋

Battery-Powered Sensor Node

The PCA9555BSHP can consolidate multiple digital sensor-enable lines, configuration switches, and fault inputs on a compact sensor node. Its 16-bit I/O structure allows the host to share one serial bus with sensors or memory rather than assigning a dedicated GPIO pin to every function. The 5.5 V maximum operating voltage and 24-HVQFN package make it suitable for tightly spaced embedded assemblies. For battery-powered equipment, verify the device's actual quiescent current and active-state consumption in the manufacturer data, then compare those values with the module's sleep current because the expander may prevent the host controller from remaining the sole active device on the bus.

🖥️

Test and Measurement Equipment

In a test instrument, the PCA9555BSHP can collect front-panel button states, module-present signals, and configuration selectors while also controlling status lamps or relay-select lines. The 400 kHz I2C capability supports efficient register access, and the interrupt output helps the controller avoid continuous serial polling when an operator changes a control. The compact 4 x 4 mm package preserves front-panel board area. A practical design should debounce mechanical inputs in firmware, define defaults for all output states during reset, and use the exposed-pad land pattern specified by the manufacturer to maintain reliable electrical and thermal performance.

🌐

Networking and Communications Module

The PCA9555BSHP can extend a communications module with additional port-monitor, link-status, configuration, or module-control signals. Its I2C address pins allow several expanders to coexist on a shared bus, including combinations with a PCA9554 because the two families use the same fixed address. The interrupt output is useful for monitoring remote line cards or transceiver-related control events without continuous polling. In network equipment, use the device only for logic-level control functions, and keep externally exposed lines behind the protection network required by the installation environment, including surge, overvoltage, and isolation considerations.

What is the PCA9555BSHP?
The PCA9555BSHP is a 16-bit I2C-bus and SMBus I/O expander with an interrupt output from NXP Semiconductors. According to the NXP product page, it adds 16 configurable digital ports to a host controller over a two-wire bus and is packaged in a 24-HVQFN package measuring 4 x 4 mm. Each port can be used for input monitoring or output control.
What is the maximum I2C bus speed of the PCA9555BSHP?
The PCA9555BSHP supports I2C-bus and SMBus communication at speeds up to 400 kHz. The manufacturer also identifies operation at the conventional 100 kHz bus rate. The practical limit of a complete bus also depends on bus capacitance, pull-up resistance, clock stretching behavior, and the other devices connected to the same bus.
How many devices can share an I2C bus with the PCA9555BSHP?
As many as eight PCA9555 devices can share one I2C-bus when their A0, A1, and A2 address pins are configured differently. According to the NXP product page, the PCA9555 also uses the same fixed bus address as the PCA9554, allowing both device types to coexist as long as no two devices require conflicting addresses.
Where can I download the PCA9555BSHP datasheet PDF?
The official PCA9555BS datasheet and product resources are available from the NXP part page at https://www.nxp.com/part/PCA9555BS. The manufacturer data includes the device description, address-selection information, and package documentation. Use the pin-description table and package drawing in those resources when assigning PCB nets and preparing the exposed-pad layout.
Where can I find the PCA9555BSHP pinout?
The PCA9555BSHP uses a 24-HVQFN 4 x 4 mm package, and its authoritative pin assignment is shown in the manufacturer datasheet and package drawing. Because the individual pin names are not published on the product-page summary, use the NXP pin table rather than a distributor preview when routing VDD, VSS, address, port, clock, data, and interrupt signals.
What are the key specifications of PCA9555BSHP that engineers should know?
The PCA9555BSHP provides 16 configurable digital I/O ports, supports I2C and SMBus at up to 400 kHz, accepts a maximum supply voltage of 5.5 V, and includes an interrupt output. Its three address pins permit up to eight devices on one bus, while the 24-HVQFN 4 x 4 mm package supports compact surface-mount layouts.
What can replace the PCA9555BSHP?
A verified, pin-to-pin drop-in replacement must use the same 24-HVQFN 4 x 4 mm footprint and preserve the 16-port pinout, address configuration, register behavior, interrupt function, and electrical limits. The available cross-reference results do not identify a confirmed same-package substitute, so engineers should request manufacturer cross-reference data before treating another expander as a direct replacement.
Is PCA9555BSHP suitable for expanding a microcontroller GPIO port?
Yes, the PCA9555BSHP is designed to add 16 digital I/O ports to a host controller through an I2C or SMBus interface. It is especially useful when a controller has too few pins for buttons, LEDs, status indicators, or control signals. Firmware must configure the direction and polarity of each port through the device registers.
When should I choose the PCA9555BSHP instead of a smaller I/O expander?
Choose the PCA9555BSHP when the design needs one compact device to provide 16 digital ports rather than several lower-count expanders. Its interrupt output also helps the host avoid continuous polling, and the 4 x 4 mm HVQFN footprint limits board area. A smaller expander remains preferable when the required port count is substantially below 16.
How should pull-up resistors be placed on the PCA9555BSHP I2C bus?
Use pull-up resistors from the bus clock and data lines to the appropriate positive supply rail, and place them physically close to the bus master or the electrically farthest participating device. The resistor value must satisfy the bus rise-time requirement at the selected 400 kHz rate while remaining within the current limits of the bus devices.
Does the PCA9555BSHP interrupt output eliminate all I2C polling?
No, the interrupt output provides a hardware indication that an expander input has changed, but the host still reads the relevant device register over I2C to identify and act on the event. This approach usually reduces unnecessary bus traffic compared with continuous polling, provided the interrupt line is correctly configured, debounced as required by the application, and handled by the firmware.
Is the PCA9555DBRG4 a drop-in replacement for PCA9555BSHP?
The PCA9555DBRG4 is a Texas Instruments device associated with the same PCA9555 family, but it is not a confirmed drop-in replacement for the PCA9555BSHP. The package, exposed-pad construction, and board footprint must be compared before considering a substitution. Use the manufacturer pinout and land-pattern data rather than assuming functional equivalence guarantees mechanical compatibility.
What is the best NXP alternative to the PCA9555BSHP?
The closest same-manufacturer option is another qualified PCA9555 device that preserves the 24-HVQFN footprint and identical pin arrangement. However, the available manufacturer listing identifies PCA9555BS rather than a separately confirmed alternate ordering code. Select the exact NXP package variant only after comparing its ordering information, temperature range, and pinout with the original design.
Where can I buy PCA9555BSHP online?
Use the Request a Quote form on this page to request current pricing, stock, lead time, and minimum-order quantity for PCA9555BSHP. The part is offered in a 24-HVQFN 4 x 4 mm tape-and-reel format. A direct quote confirms the exact suffix, current inventory position, and delivery schedule for the proposed order quantity.
How much does the PCA9555BSHP cost?
Current commercial terms for PCA9555BSHP are available through the Request a Quote form on this page. The request can specify your required quantity, target reel format, and delivery location. Because distributor inventory and volume pricing change frequently, request a current quote rather than relying on an archived unit price when preparing a production BOM.
What is the lead time for PCA9555BSHP?
The current lead time for PCA9555BSHP is confirmed through the Request a Quote form on this page. Include the order quantity and required ship-to country or region so the supplier can return a meaningful schedule. For production planning, also allow time for PCB assembly, incoming inspection, and any date-code or traceability requirements.

Data referensi kejuruteraan untuk PCA9555BSHP — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the PCA9555BSHP when a design needs 16 additional logic-level I/O ports while keeping the footprint compact and using a single I2C or SMBus connection. Its 400 kHz bus capability, hardware-selectable address, and interrupt output make it suitable for control panels, LED and relay interfaces, and distributed digital monitoring. The A0, A1, and A2 pins allow several devices to share one bus, and the PCA9554-compatible fixed address supports mixed expander populations. Before selecting it, confirm the 5.5 V maximum supply condition and the required operating-temperature grade against the system environment. A confirmed drop-in substitute was not identified from the available manufacturer and cross-reference records, so any proposed second source should be checked for identical pinout, exposed-pad layout, register behavior, and output-drive limits rather than selected solely by family name or function.

Catatan Desain

Route the exposed pad to the ground plane using the land pattern and via arrangement in the manufacturer package drawing. A compact 4 x 4 mm HVQFN package can be difficult to inspect after assembly, so verify pad alignment and exposed-pad soldering before releasing large production quantities. Keep the address straps, clock, and data traces away from noisy switching nodes.

Select I2C pull-up resistors using the bus capacitance, target rise time, and the 400 kHz operating rate rather than copying a single value across every board. Place pull-ups where they minimize the effective resistive loop and avoid long stubs from the expander to the bus. Confirm the actual pull-up voltage remains within the device's allowed input and supply levels.

Do not assume that two parts with similar PCA9555 functionality are mechanically interchangeable. The device family includes multiple package options, and exposed-pad construction can differ. Before substituting a component, compare the complete pin list, address behavior, register map, electrical limits, temperature range, and PCB land pattern against the original device.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer product-page summary does not state the requested compliance declarations. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status for the exact ordering code before release to production.

Pencarian Berhubungan

pca9555 spec pca9555bs datasheet PCA9555BSHP datasheet PCA9555BSHP pinout PCA9555BSHP HVQFN-24 PCA9555BSHP I2C 400 kHz PCA9555BSHP price PCA9555BSHP stock PCA9555BSHP replacement PCA9555BSHP equivalent PCA9555BSHP vs PCA9555DBRG4 NXP PCA9555BSHP 16 bit I2C I/O expander HVQFN24 PCA9555BSHP GPIO expansion application PCA9555BSHP interrupt output

Komponen dan Tanda berkaitan

NXP Semiconductors PCA9555BSHP PCA9555BS PCA9554 PCA9555DBRG4 I2C-bus SMBus I/O expander GPIO expander interface IC logic-level digital port interrupt output hardware address pins 400 kHz I2C 5.5 V maximum supply voltage HVQFN-24 QFN package family surface-mount package exposed pad industrial control panel LED control relay control test and measurement equipment RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ