Microchip Technology

PIC16F707-E/ML - 20MHz 14KB 8-Bit MCU | Microchip

MPN: PIC16F707-E/ML ✓ Aktif
1.8V to 5.5V Vdss 44-QFN (8 mm x 8 mm) Package 20 MHz Speed 14KB Memory
MOQ: 1 |

PIC16F707-E/ML Ringkasan

The Microchip Technology PIC16F707-E/ML is an 8-bit PIC microcontroller with 14KB of Flash program memory, a 20MHz maximum CPU frequency, and a 44-QFN 8 mm by 8 mm package. It operates from 1.8V to 5.5V and combines nanoWatt XLP low-power technology with capacitive-touch sensing capabilities. The /ML package designation identifies the 44-lead QFN option with an exposed pad.

A PIC16-series microcontroller is a programmable controller combining a CPU core, Flash memory, data memory, digital and analog peripherals, and communication interfaces on one semiconductor device. It belongs to the embedded-controller hierarchy used for compact control, measurement, communication, and user-interface products. The PIC16F707 family is specifically positioned around low-power operation, capacitive-touch acquisition, and small-system control rather than high-performance computing.

Important device characteristics include 14KB of Flash organized as 8K by 14 program words, 20MHz maximum operation, and a 1.8V to 5.5V supply range. The family supports up to 32 capacitive-touch channels according to the Microchip product page. Its XLP architecture supports low-power operating modes for battery-powered equipment, while the integrated touch capability reduces the need for separate sensing hardware in keypads, sliders, and proximity controls.

The PIC16F707 combines a compact RISC-based control core with dedicated digital I/O, timer, communications, and touch-related resources. The 44-QFN package provides 40 I/O pins in the family configuration and uses an exposed thermal pad to improve heat transfer from the device to the PCB. Designers must use the package-specific pin table because lead assignment, analog functions, power pins, and exposed-pad requirements must be matched exactly to the chosen PCB footprint.

Typical uses include capacitive-touch user interfaces, industrial control panels, compact consumer appliances, battery-powered accessories, temperature-measurement equipment, and communication modules. Its low-voltage operation and XLP features are useful when the design must remain responsive while minimizing standby consumption. The 14KB Flash capacity is suitable for embedded firmware that includes touch scanning, control logic, calibration, and communication routines without requiring a separate memory device.

PCB implementation should preserve the exposed-pad grounding and thermal requirements of the 44-QFN package. Place input and bulk decoupling capacitors close to the appropriate supply pins, route sensitive touch inputs away from switching nodes, and follow the manufacturer’s pin-description and layout guidance when assigning multiplexed peripheral functions. Programming, clocking, brownout, and watchdog settings should be selected from the device configuration data rather than inferred from board requirements alone.

This product record consolidates the exact MPN, package, memory, voltage, frequency, lifecycle, sourcing, and comparison information into one engineering reference. It also identifies the limits of available drop-in substitutions and highlights the practical checks needed when replacing a microcontroller in an existing 44-QFN design.

Pilihan pengganti yang segera untuk PIC16F707-E/ML — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera PIC16F707-E/ML (sama faktor bentuk dan kaki) — berbeza dalam Package, ADC, Timers, Low-Power Technology, Operating Temperature.

Microchip Technology
Package: 44-pin UQFN EP (5x5 mm, 0.5 mm pitch)
ADC: Up to 14 channels, 10-bit
Timers: 4x 8/16-bit with ECCP
Microchip Technology
Package: 44-VQFN Exposed Pad (ML)
ADC: 10-bit, 14 channels
Timers: 3
Microchip Technology
Package: 44-pin VQFN (ML) with exposed pad
ADC: 8 channels, 8-bit resolution
Timers: 3 (Timer0, Timer1, Timer2)

PIC16F707-I/ML

✅ Masuk Drop-In
Microchip Technology
📦 44-QFN (8 mm x 8 mm)
PIC16 enhanced mid-range 8-bit RISC · 14 KB flash · 363 bytes · 256 bytes · 20 MHz · 2.5 V to 5.5 V · 1.8 V to 3.6 V · 36

Hubungi untuk harga

Lihat Datasheet →

PIC16F74T-E/ML

✅ Masuk Drop-In
Microchip Technology
📦 44-VQFN ExposedPad
PIC16 (8-bit RISC) · 14-bit · Flash · 7 KB · 192 B · 20 MHz · 200 ns (5 MIPS) · 35 (single-word)

Hubungi untuk harga

Lihat Datasheet →

PIC16F747-E/ML

✅ Masuk Drop-In
Microchip Technology
📦 44-VQFN ExposedPad
Microchip Technology · PIC® 16F · PIC · 8-bit · 7 KB (4K x 14) · 368 bytes · 36 · 20 MHz

Hubungi untuk harga

Lihat Datasheet →

PIC16F707-E/ML Penilaian maksimum & Ciri-ciri Elektrik

Controller Type 8-bit PIC microcontroller
Maximum CPU Frequency 20 MHz
Internal Oscillator Nominal Frequency 16 MHz
Flash Program Memory 14KB
Flash Program Organization 8K x 14 words
Tegangan Pemberi Arus Operasi 1.8V to 5.5V
Supported Supply Points 2.5V, 3.3V, and 5V
Capacitive Touch Channels 32 channels
Low-Power Technology nanoWalt XLP Technology
Touch Technology mTouch capacitive sensing
Kemasan 44-QFN (8 mm x 8 mm)
Package Pin Count 44 pins
Exposed Pad Present
Jenis Pemasangan Surface mount
Packaging Tube

Panduan Konfigurasi Pin PIC16F707-E/ML 44 pins

Konfigurasi pin untuk PIC16F707-E/ML (44 pins pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 44 pins untuk PIC16F707-E/ML

Tiada data garisan pin yang diperoleh untuk PIC16F707-E/ML.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

PIC16F707-E/ML patut untuk 6 aplikasis: Capacitive-Touch Control Panel, Industrial Equipment Interface, Battery-Powered Sensor Node, Consumer Appliance Controller, Temperature and Analog Monitoring, Compact Communication Module.

🧩

Capacitive-Touch Control Panel

The PIC16F707-E/ML fits a compact touch-control panel because the PIC16F707 family supports up to 32 capacitive-touch channels through mTouch technology. The controller can scan keypad, slider, or proximity electrodes while the 8-bit CPU executes panel logic, calibration, indicator control, and communications. Its 14KB Flash capacity provides room for touch configuration and application firmware, while the 1.8V to 5.5V range supports common embedded supply levels. The 44-QFN footprint also keeps the design compact, although the exposed pad and sensitive touch routing require careful PCB implementation.

🏭

Industrial Equipment Interface

The PIC16F707-E/ML can serve as the local controller in industrial equipment where a compact 8-bit MCU must coordinate discrete inputs, indicators, and a serial interface. Its 20MHz maximum operating frequency provides headroom for routine control tasks, while 14KB of Flash accommodates firmware for state machines, diagnostics, and communication protocols. The 44-QFN 8 mm by 8 mm package reduces board area, and the E-grade ordering code addresses applications requiring that temperature classification. The exact peripheral mix and industrial qualification requirements should be confirmed against the product specification before release.

🔋

Battery-Powered Sensor Node

The PIC16F707-E/ML is appropriate for a battery-powered sensor node because nanoWalt XLP Technology supports reduced-power operating strategies. The microcontroller can wake from a low-activity state, read an input, update a sensor or indicator, and return to sleep while retaining compact code in 14KB of Flash. Its 1.8V minimum operating voltage permits use with low-voltage power systems, and the 8-bit architecture is sufficient for straightforward measurement and control. Battery life should be calculated using the manufacturer’s sleep and active-current specifications under the final clock, peripheral, and sensor load.

🔧

Consumer Appliance Controller

A small household appliance can use the PIC16F707-E/ML to manage button inputs, motor or valve commands, status LEDs, and a simple serial interface. Its 20MHz ceiling and 8-bit instruction set support responsive foreground control without requiring a higher-cost processor, while 14KB of Flash provides adequate room for application logic. The 1.8V to 5.5V operating range offers flexibility in mixed-voltage products, and the 44-QFN package reduces PCB area. Designers should account for inductive loads, switching transients, and grounding when placing the controller beside power components.

🌡️

Temperature and Analog Monitoring

The PIC16F707-E/ML can coordinate a small measurement system that combines analog sensing, threshold evaluation, and local display or communication. Its 20MHz processing capability supports timed acquisition and control logic, while the family’s analog and timer resources should be assigned according to the manufacturer pin table. The 14KB Flash space can hold calibration tables, filtering, fault handling, and communication routines. A 3.3V or 5V implementation is possible within the stated 1.8V to 5.5V operating range, provided that sensor outputs, references, and digital thresholds remain within the selected supply plan.

🌐

Compact Communication Module

The PIC16F707-E/ML can act as the supervisory controller in a compact communication module that receives commands, manages indicators or connectors, and performs local configuration. Its 8-bit core and 20MHz maximum frequency are appropriate for protocol handling and lightweight embedded logic, while 14KB of Flash can store framing, configuration, and diagnostics. The 44-QFN package helps minimize module area, and XLP features can reduce consumption when the module spends time waiting for activity. Final design work must verify the required serial peripheral, interrupt behavior, clock configuration, and signal-level compatibility with the attached transceiver.

Ringkasan Produk Disebarkan

PIC16F707 Parent PIC16F707 family supporting mTouch capacitive sensing Dipergunakan di: Capacitive-Touch Control Panel, Industrial Equipment Interface, Battery-Powered Sensor Node, Consumer Appliance Controller, Temperature and Analog Monitoring, Compact Communication Module PIC16LF707 Low-voltage member of the PIC16F707 family Dipergunakan di: Capacitive-Touch Control Panel, Industrial Equipment Interface, Battery-Powered Sensor Node, Consumer Appliance Controller, Temperature and Analog Monitoring, Compact Communication Module
What are the key specifications of PIC16F707-E/ML that engineers should know?
The PIC16F707-E/ML is an 8-bit Microchip PIC microcontroller with 20MHz maximum operating frequency, 14KB of Flash program memory organized as 8K by 14 words, and a 1.8V to 5.5V supply range. According to the Microchip product page, the device belongs to the nanoWalt XLP and mTouch families and supports as many as 32 capacitive-touch channels. It is offered in a 44-QFN package measuring 8 mm by 8 mm.
Where can I download the PIC16F707-E/ML datasheet PDF?
The official PIC16F707-E/ML technical information is available through the Microchip PIC16F707 product page at https://www.microchip.com/en-us/product/PIC16F707. Open the Data Sheet link for the authoritative electrical characteristics, memory map, configuration options, pin descriptions, and package dimensions. Use the pin-description table for the 44-QFN /ML variant when assigning PCB nets.
Where can I find the PIC16F707-E/ML pinout?
The PIC16F707-E/ML pinout is documented in the 44-QFN pin-description table in the Microchip PIC16F707 data sheet. The package has 44 leads and an exposed pad, and the exact functions assigned to many leads can vary with digital, analog, peripheral, and programming modes. Start with the package-specific pin table when making the PCB footprint and verify the exposed-pad connection before fabrication.
What is the PIC16F707-E/ML operating voltage range?
The PIC16F707-E/ML operates from 1.8V to 5.5V, according to the Microchip manufacturer listing. The family is also identified as supporting 2.5V, 3.3V, and 5V supply arrangements. The selected regulator should maintain the required voltage at the device pins under load, while decoupling and layout must follow the manufacturer’s recommended application circuit.
How much Flash memory does PIC16F707-E/ML have?
The PIC16F707-E/ML contains 14KB of Flash program memory organized as 8K by 14 words, as stated in the Microchip PIC16F707 product page. This is suitable for embedded control firmware, capacitive-touch scanning, communication routines, calibration, and application logic. The exact RAM, EEPROM, and peripheral allocation should be checked in the manufacturer data sheet before finalizing firmware requirements.
What can replace PIC16F707-E/ML on the same PCB?
PIC16F707-I/ML is the closest documented same-family option because it uses the 44-QFN 8 mm by 8 mm package and retains the PIC16F707 architecture, memory class, and capacitive-touch capability. However, its temperature-grade designation differs from the -E/ML target, so it is not an unconditional substitute for every operating environment. Confirm the pinout, configuration bits, timing, and temperature requirements before production replacement.
Is PIC16F707-I/ML the same as PIC16F707-E/ML?
PIC16F707-I/ML and PIC16F707-E/ML are closely related 44-QFN PIC16F707 devices, but their grade codes identify different temperature classifications. The I/ML option is therefore not functionally and electrically identical across every operating condition even though its package, 8-bit architecture, 14KB Flash class, and touch-oriented feature set align with the target. Confirm the required ambient range and production marking before substitution.
When should I choose PIC16F707-E/ML over PIC16F707-I/ML?
Choose PIC16F707-E/ML when the design requires the E-grade temperature classification of the target MPN and operates with the 44-QFN exposed-pad layout specified for that grade. Choose PIC16F707-I/ML only when its temperature range, electrical limits, configuration identity, and qualification requirements satisfy the product specification. The 0 mm package-dimension difference does not remove the need to verify operating-grade compatibility.
PIC16F707-E/ML vs PIC16F707-I/ML: which is better for an industrial control panel?
PIC16F707-E/ML is preferable when the control panel requires the extended-grade classification represented by the -E code, especially where ambient temperature exceeds the operating limits associated with an industrial-temperature I-grade part. Both devices use the 44-QFN 8 mm by 8 mm package and share the PIC16F707 family resources. The final decision should follow the product’s minimum and maximum ambient-temperature requirements.
Can PIC16F74T-E/ML replace PIC16F707-E/ML?
PIC16F74T-E/ML is a 44-VQFN Microchip controller and is a candidate for evaluation, but it should not be treated as an automatic drop-in replacement for PIC16F707-E/ML. The documented comparison identifies the same 44-VQFN exposed-pad package class while the devices belong to different controller families. Compare pin functions, memory, timers, communications, touch capability, configuration bits, and timing before approving a substitution.
Is PIC16F707-E/ML suitable for capacitive-touch products?
Yes, the PIC16F707-E/ML is suitable for capacitive-touch products because the Microchip PIC16F707 family uses mTouch technology and supports up to 32 capacitive-touch channels. The controller can scan touch electrodes while also handling ordinary embedded-control functions. Channel count, electrode geometry, sensitivity, noise immunity, and application performance should be validated in the final PCB and firmware implementation.
How does the PIC16F707-E/ML support low-power designs?
The PIC16F707-E/ML incorporates nanoWalt XLP Technology for low-power operation, according to the Microchip product page. This family feature is intended to reduce current consumption in applications that spend substantial time idle, asleep, or in other reduced-activity states. Actual standby and active-current figures, sleep modes, and wake-up behavior should be taken from the device data sheet for the selected operating configuration.
Where can I buy PIC16F707-E/ML online?
Use the Request a Quote form on this page to request the PIC16F707-E/ML with the exact 44-QFN /ML package code. The request should identify the required quantity, tube or reel packaging preference, and target delivery location. This approach avoids ambiguity with other package and temperature-grade variants of the PIC16F707 family.
What is the price of PIC16F707-E/ML?
The current unit price and available quantity for PIC16F707-E/ML are shown through the Request a Quote form on this page. When requesting a quotation, include the exact MPN PIC16F707-E/ML so the 44-QFN package and grade code are not confused with another PIC16F707 ordering code. Volume breaks and delivery terms can then be confirmed for the intended build schedule.
What is the lead time and stock status for PIC16F707-E/ML?
Current stock, lead time, and minimum order quantity for PIC16F707-E/ML should be confirmed through the Request a Quote form on this page. Microchip lists the PIC16F707 family as in production, but family-level lifecycle status does not by itself establish the inventory position of every package and temperature-grade code. Provide your forecast quantity and required date when requesting the quotation.

Data referensi kejuruteraan untuk PIC16F707-E/ML — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose PIC16F707-E/ML when the design specifically requires the E-grade 44-QFN controller, a 20MHz 8-bit PIC core, 14KB of Flash, low-voltage operation, and capacitive-touch acquisition. PIC16F707-I/ML is the closest physical-footprint alternative when its I-grade temperature classification satisfies the product requirements; verify its operating limits before approval. PIC16F74T-E/ML may fit a 44-VQFN design requiring a different PIC16 controller, but its memory, peripheral map, timing, and pin functions must be checked rather than assumed. PIC16F747-E/ML is also a 44-VQFN family member with documented low-power characteristics, yet its exact electrical and memory compatibility with the target is not established. For production use, treat footprint equality as only the first gate: verify grade, exposed-pad grounding, configuration identity, firmware compatibility, and every assigned peripheral.

Perbandingan dengan Gantian

Parametr Produk Ini PIC16F707-I/ML PIC16F74T-E/ML PIC16F747-E/ML
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 44-QFN (8 mm x 8 mm) 44-QFN ExposedPad 44-VQFN ExposedPad 44-VQFN ExposedPad
Architecture 8-bit PIC 8-bit PIC 8-bit PIC 8-bit PIC
Temperature Grade E grade I grade E grade E grade

Penyeberangsung Jelas

  • Matches the requested E-grade ordering code (vsPIC16F707-I/ML)
  • Combines XLP control with mTouch acquisition (vsPIC16F74T-E/ML)
  • Provides documented 20MHz operation and 14KB Flash (vsPIC16F747-E/ML)

Catatan Desain

Use the package drawing for the 44-QFN 8 mm by 8 mm footprint and assign every lead from the manufacturer pin-description table. Keep the exposed pad as a dedicated, low-impedance connection to the intended ground plane according to the package guidance. Confirm land geometry against the current manufacturer drawing before Gerber release because exposed-pad dimensions and paste recommendations are controlled package details rather than interchangeable generic QFN values.

Place the required supply bypass capacitors directly beside the corresponding VDD and VSS pins, with the shortest possible ground return. Select capacitance and voltage rating from the manufacturer application circuit and local decoupling recommendations. Because the device supports operation down to 1.8V, verify that the regulator’s tolerance, startup behavior, and load-transient response maintain the supply limits at every power state.

Route capacitive-touch electrodes away from high-current switching paths, inductors, oscillator circuits, and high-speed communication nets. Use a quiet ground reference for touch inputs where the application circuit recommends it, and evaluate sensitivity with the production enclosure and cable configuration. Firmware averaging or filtering can improve repeatability, but it cannot compensate for an electrode layout contaminated by board-level switching noise.

Do not treat any 44-QFN PIC16F707 option as interchangeable without checking the grade code, exposed-pad connection, pin multiplexing, configuration bits, and peripheral assignments. In particular, PIC16F707-I/ML matches the physical package but carries a different grade code from PIC16F707-E/ML. Confirm programming, clock, brownout, watchdog, and peripheral settings in the exact device data sheet before substituting a part in production.

Use the exposed thermal pad and surrounding PCB copper as the primary heat-spreading path for the 44-QFN device. Avoid placing the microcontroller immediately beside a regulator or power stage unless the thermal environment has been evaluated. Calculate worst-case junction temperature using the manufacturer’s thermal parameters and the actual board construction, because a small package in free air does not represent the thermal conditions of a production PCB.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified. The PIC16F707 is an industrial microcontroller, so automotive qualification is not assumed.

Pencarian Berhubungan

PIC16F707-E/ML datasheet PIC16F707-E/ML pinout PIC16F707-E/ML datasheet pdf PIC16F707-E/ML equivalent PIC16F707-E/ML replacement PIC16F707-E/ML price PIC16F707-E/ML stock PIC16F707-E/ML 44-QFN PIC16F707-E/ML capacitive touch PIC16F707-E/ML vs PIC16F707-I/ML Microchip PIC16F707-E/ML PIC16F707 20MHz 14KB microcontroller

Komponen dan Tanda berkaitan

Microchip Technology PIC16F707-E/ML PIC16F707 PIC16LF707 PIC16F707-I/ML PIC16F74T-E/ML PIC16F747-E/ML PIC16 microcontroller 8-bit microcontroller RISC architecture Flash program memory nanoWalt XLP Technology mTouch Technology capacitive touch sensing 44-QFN package VQFN exposed-pad package surface mount 20MHz CPU clock 1.8V to 5.5V power supply industrial control consumer appliance battery-powered sensor node temperature monitoring communication module Microchip cross-reference search
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ