PIC16F707-E/ML - 20MHz 14KB 8-Bit MCU | Microchip
N.º da peça: PIC16F707-E/ML ✓ AtivoPIC16F707-E/ML Visão geral
A PIC16-series microcontroller is a programmable controller combining a CPU core, Flash memory, data memory, digital and analog peripherals, and communication interfaces on one semiconductor device. It belongs to the embedded-controller hierarchy used for compact control, measurement, communication, and user-interface products. The PIC16F707 family is specifically positioned around low-power operation, capacitive-touch acquisition, and small-system control rather than high-performance computing.
Important device characteristics include 14KB of Flash organized as 8K by 14 program words, 20MHz maximum operation, and a 1.8V to 5.5V supply range. The family supports up to 32 capacitive-touch channels according to the Microchip product page. Its XLP architecture supports low-power operating modes for battery-powered equipment, while the integrated touch capability reduces the need for separate sensing hardware in keypads, sliders, and proximity controls.
The PIC16F707 combines a compact RISC-based control core with dedicated digital I/O, timer, communications, and touch-related resources. The 44-QFN package provides 40 I/O pins in the family configuration and uses an exposed thermal pad to improve heat transfer from the device to the PCB. Designers must use the package-specific pin table because lead assignment, analog functions, power pins, and exposed-pad requirements must be matched exactly to the chosen PCB footprint.
Typical uses include capacitive-touch user interfaces, industrial control panels, compact consumer appliances, battery-powered accessories, temperature-measurement equipment, and communication modules. Its low-voltage operation and XLP features are useful when the design must remain responsive while minimizing standby consumption. The 14KB Flash capacity is suitable for embedded firmware that includes touch scanning, control logic, calibration, and communication routines without requiring a separate memory device.
PCB implementation should preserve the exposed-pad grounding and thermal requirements of the 44-QFN package. Place input and bulk decoupling capacitors close to the appropriate supply pins, route sensitive touch inputs away from switching nodes, and follow the manufacturer’s pin-description and layout guidance when assigning multiplexed peripheral functions. Programming, clocking, brownout, and watchdog settings should be selected from the device configuration data rather than inferred from board requirements alone.
This product record consolidates the exact MPN, package, memory, voltage, frequency, lifecycle, sourcing, and comparison information into one engineering reference. It also identifies the limits of available drop-in substitutions and highlights the practical checks needed when replacing a microcontroller in an existing 44-QFN design.
Alternativas drop-in para PIC16F707-E/ML — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16F707-E/ML (mesmo formato e footprint) — diferindo em Package, ADC, Timers, Low-Power Technology, Operating Temperature.
PIC16F707-I/ML
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC16F74T-E/ML
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC16F747-E/ML
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC16F707-E/ML Classificações máximas e características elétricas
| Controller Type | 8-bit PIC microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Internal Oscillator Nominal Frequency | 16 MHz |
| Flash Program Memory | 14KB |
| Flash Program Organization | 8K x 14 words |
| Tensão de alimentação de operação | 1.8V to 5.5V |
| Supported Supply Points | 2.5V, 3.3V, and 5V |
| Capacitive Touch Channels | 32 channels |
| Low-Power Technology | nanoWalt XLP Technology |
| Touch Technology | mTouch capacitive sensing |
| Encapsulamento | 44-QFN (8 mm x 8 mm) |
| Package Pin Count | 44 pins |
| Exposed Pad | Present |
| Tipo de montagem | Surface mount |
| Packaging | Tube |
Guia de Configuração de Pinos do PIC16F707-E/ML 44 pins
Configuração de pinos para PIC16F707-E/ML (pacote 44 pins). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC16F707-E/ML.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC16F707-E/ML é adequado para 6 aplicaçãos: Capacitive-Touch Control Panel, Industrial Equipment Interface, Battery-Powered Sensor Node, Consumer Appliance Controller, Temperature and Analog Monitoring, Compact Communication Module.
Capacitive-Touch Control Panel
The PIC16F707-E/ML fits a compact touch-control panel because the PIC16F707 family supports up to 32 capacitive-touch channels through mTouch technology. The controller can scan keypad, slider, or proximity electrodes while the 8-bit CPU executes panel logic, calibration, indicator control, and communications. Its 14KB Flash capacity provides room for touch configuration and application firmware, while the 1.8V to 5.5V range supports common embedded supply levels. The 44-QFN footprint also keeps the design compact, although the exposed pad and sensitive touch routing require careful PCB implementation.
Recomendado
Industrial Equipment Interface
The PIC16F707-E/ML can serve as the local controller in industrial equipment where a compact 8-bit MCU must coordinate discrete inputs, indicators, and a serial interface. Its 20MHz maximum operating frequency provides headroom for routine control tasks, while 14KB of Flash accommodates firmware for state machines, diagnostics, and communication protocols. The 44-QFN 8 mm by 8 mm package reduces board area, and the E-grade ordering code addresses applications requiring that temperature classification. The exact peripheral mix and industrial qualification requirements should be confirmed against the product specification before release.
Recomendado
Battery-Powered Sensor Node
The PIC16F707-E/ML is appropriate for a battery-powered sensor node because nanoWalt XLP Technology supports reduced-power operating strategies. The microcontroller can wake from a low-activity state, read an input, update a sensor or indicator, and return to sleep while retaining compact code in 14KB of Flash. Its 1.8V minimum operating voltage permits use with low-voltage power systems, and the 8-bit architecture is sufficient for straightforward measurement and control. Battery life should be calculated using the manufacturer’s sleep and active-current specifications under the final clock, peripheral, and sensor load.
Recomendado
Consumer Appliance Controller
A small household appliance can use the PIC16F707-E/ML to manage button inputs, motor or valve commands, status LEDs, and a simple serial interface. Its 20MHz ceiling and 8-bit instruction set support responsive foreground control without requiring a higher-cost processor, while 14KB of Flash provides adequate room for application logic. The 1.8V to 5.5V operating range offers flexibility in mixed-voltage products, and the 44-QFN package reduces PCB area. Designers should account for inductive loads, switching transients, and grounding when placing the controller beside power components.
Recomendado
Temperature and Analog Monitoring
The PIC16F707-E/ML can coordinate a small measurement system that combines analog sensing, threshold evaluation, and local display or communication. Its 20MHz processing capability supports timed acquisition and control logic, while the family’s analog and timer resources should be assigned according to the manufacturer pin table. The 14KB Flash space can hold calibration tables, filtering, fault handling, and communication routines. A 3.3V or 5V implementation is possible within the stated 1.8V to 5.5V operating range, provided that sensor outputs, references, and digital thresholds remain within the selected supply plan.
Recomendado
Compact Communication Module
The PIC16F707-E/ML can act as the supervisory controller in a compact communication module that receives commands, manages indicators or connectors, and performs local configuration. Its 8-bit core and 20MHz maximum frequency are appropriate for protocol handling and lightweight embedded logic, while 14KB of Flash can store framing, configuration, and diagnostics. The 44-QFN package helps minimize module area, and XLP features can reduce consumption when the module spends time waiting for activity. Final design work must verify the required serial peripheral, interrupt behavior, clock configuration, and signal-level compatibility with the attached transceiver.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16F707-E/ML — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16F707-I/ML | PIC16F74T-E/ML | PIC16F747-E/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8 mm x 8 mm) | 44-QFN ExposedPad | 44-VQFN ExposedPad | 44-VQFN ExposedPad |
| Architecture | 8-bit PIC | 8-bit PIC | 8-bit PIC | 8-bit PIC |
| Temperature Grade | E grade | I grade | E grade | E grade |
Principais diferenciais
- Matches the requested E-grade ordering code (vs PIC16F707-I/ML)
- Combines XLP control with mTouch acquisition (vs PIC16F74T-E/ML)
- Provides documented 20MHz operation and 14KB Flash (vs PIC16F747-E/ML)
Notas de projeto
Use the package drawing for the 44-QFN 8 mm by 8 mm footprint and assign every lead from the manufacturer pin-description table. Keep the exposed pad as a dedicated, low-impedance connection to the intended ground plane according to the package guidance. Confirm land geometry against the current manufacturer drawing before Gerber release because exposed-pad dimensions and paste recommendations are controlled package details rather than interchangeable generic QFN values.
Place the required supply bypass capacitors directly beside the corresponding VDD and VSS pins, with the shortest possible ground return. Select capacitance and voltage rating from the manufacturer application circuit and local decoupling recommendations. Because the device supports operation down to 1.8V, verify that the regulator’s tolerance, startup behavior, and load-transient response maintain the supply limits at every power state.
Route capacitive-touch electrodes away from high-current switching paths, inductors, oscillator circuits, and high-speed communication nets. Use a quiet ground reference for touch inputs where the application circuit recommends it, and evaluate sensitivity with the production enclosure and cable configuration. Firmware averaging or filtering can improve repeatability, but it cannot compensate for an electrode layout contaminated by board-level switching noise.
Do not treat any 44-QFN PIC16F707 option as interchangeable without checking the grade code, exposed-pad connection, pin multiplexing, configuration bits, and peripheral assignments. In particular, PIC16F707-I/ML matches the physical package but carries a different grade code from PIC16F707-E/ML. Confirm programming, clock, brownout, watchdog, and peripheral settings in the exact device data sheet before substituting a part in production.
Use the exposed thermal pad and surrounding PCB copper as the primary heat-spreading path for the 44-QFN device. Avoid placing the microcontroller immediately beside a regulator or power stage unless the thermal environment has been evaluated. Calculate worst-case junction temperature using the manufacturer’s thermal parameters and the actual board construction, because a small package in free air does not represent the thermal conditions of a production PCB.
Informações de conformidade
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified. The PIC16F707 is an industrial microcontroller, so automotive qualification is not assumed.