PIC16F913-E/ML - 8-Bit 20MHz Flash MCU | Microchip
MPN: PIC16F913-E/ML ✓ AktifPIC16F913-E/ML Ringkasan
An 8-bit flash microcontroller is a programmable controller that combines a CPU, nonvolatile program memory, working data memory, and peripherals such as timers, serial interfaces, analog inputs, and LCD outputs. The PIC16 architecture belongs to the broader embedded-controller hierarchy and is commonly used for cost-sensitive industrial control, instrumentation, appliance control, lighting, and small automation systems where deterministic control and compact firmware support are more important than high processing bandwidth.
Key features of the PIC16F913 include 7 KB (4K × 14) of flash program memory, 368 bytes of RAM, 25 I/O pins, an 8-bit CPU, and operation up to 20 MHz. The -E grade indicates the extended-temperature device designation, while /ML identifies the 28-pin QFN package option. Flash memory supports in-system programming and simplifies firmware updates compared with older one-time-programmable or ROM-based PIC devices.
The device uses a compact 14-bit PIC16 instruction architecture and integrates resources intended for embedded control. Its 25 I/O pins provide flexible digital interfaces, while the integrated LCD-driver capability supports display-oriented products without requiring a separate display controller. Timer and communication peripherals reduce external component count in control panels, while the 368-byte RAM provides working space for variables, status flags, and moderate protocol or control buffers.
Typical applications include industrial control panels, instrument displays, HVAC and building equipment, appliance controllers, LED lighting systems, and compact embedded products requiring both LCD and digital I/O. The 20 MHz operating ceiling allows faster control-loop execution than lower-speed PIC16 variants, while the 6 × 6 mm QFN package supports space-constrained board layouts requiring careful assembly planning and exposed-pad thermal management.
PCB implementation should follow the manufacturer pinout and land-pattern guidance, particularly for the thermal pad and exposed ground connection. Place decoupling capacitance near the supply pins, preserve short current paths, and verify the selected programming tool and connector against the PIC16F913 device family. Firmware validation should include operating-voltage limits, peripheral timing, LCD segment mapping, and temperature-specific boundary testing.
This product page combines the manufacturer device information, package and memory characteristics, selection guidance, practical implementation notes, and verified pin-compatible alternatives. It is intended to help engineers identify whether the PIC16F913-E/ML matches the required memory, I/O, temperature, package, display, and programming requirements before releasing a production design.
Pilihan pengganti yang segera untuk PIC16F913-E/ML — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera PIC16F913-E/ML (sama faktor bentuk dan kaki) — berbeza dalam Architecture, Data RAM, Package, Program Memory, Programming Interface.
PIC16F913-I/ML
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
PIC16F913-E/ML Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8-bit Flash Microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 7 KB (4K × 14 words) |
| Data RAM | 368 bytes |
| I/O Pins | 25 |
| Architecture | PIC16 mid-range 14-bit RISC |
| Kemasan | 28-pin QFN (6 × 6 mm) |
| Package Type | QFN-28 |
| Jenis Pemasangan | Surface Mount |
| Program Memory Type | Flash |
| LCD Drive Capability | Yes |
| Instruction Set | 14-bit |
| Programming Interface | In-Circuit Programming |
Panduan Konfigurasi Pin PIC16F913-E/ML qfn-28
Konfigurasi pin untuk PIC16F913-E/ML (qfn-28 pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk PIC16F913-E/ML.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
PIC16F913-E/ML patut untuk 6 aplikasis: Industrial Control Panels, Instrument and Meter Displays, HVAC and Building Equipment, Appliance Control Modules, LED Lighting and Display Control, Compact Automation and Sensor Nodes.
Industrial Control Panels
PIC16F913-E/ML fits compact industrial control panels that combine 25 I/O pins, 7 KB of flash program memory, and LCD-drive resources. The 20 MHz clock supports responsive control tasks, while the 368-byte RAM holds operating state, counters, and communication buffers. Its 28-pin QFN package reduces board area compared with a larger leaded device, but the exposed-pad land pattern must be designed for reliable assembly and adequate heat spreading. Use the manufacturer pinout and programming guidance when assigning inputs, outputs, and the in-circuit programming interface.
Disebarkan
Instrument and Meter Displays
PIC16F913-E/ML is appropriate for compact meters and measurement instruments with local LCD feedback because the device integrates LCD-drive capability with a 7 KB flash memory footprint. The 8-bit CPU can execute display refresh, button handling, and basic control logic at an operating frequency up to 20 MHz. Its 25 I/O pins leave room for sensors, switches, alarm outputs, and programming signals. Designers should verify the exact segment and common-drive assignments against the intended LCD glass and validate contrast and timing across temperature.
Disebarkan
HVAC and Building Equipment
PIC16F913-E/ML can serve as the embedded controller in HVAC modules, environmental equipment, and building-control products where a compact MCU, LCD support, and numerous discrete I/O are valuable. The flash-based 7 KB memory supports field programming and firmware revision, while the 368-byte RAM accommodates state variables and timing counters. The 20 MHz operating limit provides additional timing headroom over slower PIC16 options. Validate actuator drive levels, sensor interfaces, brownout behavior, and environmental limits against the final equipment specification.
Disebarkan
Appliance Control Modules
PIC16F913-E/ML fits appliance-control modules that require coordinated digital inputs and outputs, nonvolatile firmware, and a low-profile controller package. Its 25 I/O pins can support keys, indicators, relays, interlocks, and external status signals, while the integrated LCD capability supports simple displays on premium appliances. The 8-bit PIC16 instruction architecture simplifies straightforward state-machine and timing control. Care is needed with inductive loads, noisy mains-connected interfaces, and thermal conditions, so isolation and protection belong in the surrounding circuitry.
Disebarkan
LED Lighting and Display Control
PIC16F913-E/ML can coordinate LED indication, status panels, and programmable lighting-control functions in a compact embedded system. Its 25 I/O pins provide multiple channels for indicator LEDs, switches, and control outputs, while the LCD-driver resources allow status information to be presented without a separate display controller. At up to 20 MHz, the MCU can divide its processing capacity among dimming timing, user-interface updates, and system monitoring. LED current regulation, thermal management, and flicker behavior remain external design responsibilities.
Disebarkan
Compact Automation and Sensor Nodes
PIC16F913-E/ML is suitable for small automation controllers and sensor-interface nodes that need flexible digital connectivity, flash firmware, and local display or status feedback. The 368-byte RAM supports modest data buffering and protocol state, while the 20 MHz CPU provides useful timing margin. A 28-pin QFN footprint preserves board space in compact devices, although high-density assembly may require a board house experienced with fine-pitch QFN components. The application should include watchdog, reset, and brownout planning for reliable unattended operation.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PIC16F913-E/ML — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | PIC16F913-I/ML |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 28-pin QFN (6 × 6 mm) | 28-pin QFN (6 × 6 mm) |
| Maximum CPU Frequency | 20 MHz | 20 MHz |
| Program Memory | 7 KB (4K × 14 words) | 7 KB (4K × 14 words) |
| Data RAM | 368 bytes | 368 bytes |
| I/O Pins | 25 | 25 |
| Architecture | 8-bit PIC16 RISC | 8-bit PIC16 RISC |
| Program Memory Type | Flash | Flash |
| LCD Drive Capability | Yes | Yes |
| Temperature Grade | E grade | I grade |
Penyeberangsung Jelas
- Compact display-capable control platform (vsPIC16F913-I/ML)
- Memory and peripheral set (vsPIC16F913-I/ML)
- Production PCB compatibility (vsPIC16F913-I/ML)
Catatan Desain
Follow the manufacturer’s 28-pin QFN land pattern exactly, including the exposed thermal pad, solder-mask opening, and paste stencil geometry. Place the required supply decoupling capacitor adjacent to the device power pins and keep high-current return paths short. Because QFN leads are difficult to inspect visually, define an appropriate X-ray or cross-section inspection method for production.
Verify the final rail voltage, brownout behavior, input thresholds, and I/O injection limits against the PIC16F913 datasheet before connecting external signals. Use the manufacturer’s recommended decoupling arrangement and account for voltage transients from motors, relays, or long wiring. A regulated supply alone does not guarantee safe operation; the worst-case startup and shutdown states must also remain within the device limits.
Do not select the replacement solely because both devices use a QFN package. PIC16F913-I/ML differs by temperature-grade designation, so compare its guaranteed operating-temperature range with the product’s worst-case ambient and internal temperature. Also confirm programming, configuration, and peripheral compatibility before treating it as a production drop-in replacement.
Maklumat Kesediaan
The device family includes LCD-drive and nanoWatt technology, but exact RoHS, REACH, halogen-free, and conflict-minerals declarations for this suffix were not established. AEC-Q100 qualification is not indicated by the E suffix, which denotes an extended-temperature grade rather than automotive qualification.