PIC16F916-E/ML - 20MHz 8-Bit Flash MCU | Microchip
MPN: PIC16F916-E/ML ✓ AktifPIC16F916-E/ML Ringkasan
An 8-bit microcontroller is a compact embedded-processing component built around a RISC-style processor core, program memory, data memory, and programmable I/O. Within the embedded-control hierarchy, the PIC16F916 belongs to the flash-based PIC16 family and is used where deterministic control, low component count, and simple peripheral integration are more important than high processing bandwidth.
Key features include 8K x 14 words of flash program memory, a maximum operating frequency of 20 MHz, 352 x 8 bits of data RAM, and 256 bytes of EEPROM for parameters that must survive a power interruption. Two 8-bit timers, one 16-bit timer, an extended watchdog timer, and up to 60 LCD segment outputs support timing, monitoring, and display applications.
The PIC16F91X architecture combines an internal 32 kHz-to-8 MHz oscillator with external clock options, giving designers flexibility between low-power operation and higher-performance processing. A 10-bit successive-approximation ADC supports analog measurement, while the 24 available I/O pins support digital inputs, outputs, and peripheral multiplexing. The extended operating-temperature range supports industrial and controlled-environment equipment.
Typical uses include compact industrial controllers, LCD-driven instrument panels, environmental monitoring, temperature controllers, timer-based modules, and small motor or actuator control systems. The integrated LCD capability and EEPROM are especially useful in standalone panels that need local display, parameter retention, and limited human-interface logic.
When laying out a board, treat the exposed pad as a thermal and electrical connection rather than an optional mechanical feature. Use the manufacturer pin-description table and package drawing to assign tracks, and verify the thermal pad connection and decoupling arrangement against the reference design guidance for the selected board stack-up.
This page combines device specifications, package information, lifecycle details, engineering guidance, and drop-in replacement analysis. It also identifies the differences between industrial- and extended-temperature ordering codes so engineers can select the correct grade without changing the PCB footprint.
Pilihan pengganti yang segera untuk PIC16F916-E/ML — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera PIC16F916-E/ML (sama faktor bentuk dan kaki) — berbeza dalam Architecture, Package, Product Type, Data RAM, Number of I/O.
PIC16F916-I/ML
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →PIC16F913-I/ML
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
PIC16F913-E/ML
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PIC16F914-I/ML
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PIC16F914-E/ML
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PIC16F916-E/ML Penilaian maksimum & Ciri-ciri Elektrik
| Architecture | 8-bit PIC MCU |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 14 KB flash (8K x 14 words) |
| Data RAM | 352 x 8 bits |
| Data EEPROM | 256 bytes |
| ADC Resolution | 10 bits |
| Number of I/O Pins | 24 pins |
| Internal Oscillator Range | 32 kHz to 8 MHz |
| LCD Segment Capability | Up to 60 segments |
| I/O Source/Sink Current | 25 mA |
| Timer Resources | Two 8-bit timers and one 16-bit timer |
| Watchdog Timer | Extended Watchdog Timer (EWDT) |
| Gambaran Suhu Operasi | -40°C to +125°C |
| Kemasan | 28-pin VQFN with exposed pad (6 x 6 mm) |
| Jenis Pemasangan | Surface mount |
| Low-Power Technology | nanoWatt Technology |
| Programming Interface | In-circuit programming supported |
| Status RoHS | Compliant |
Panduan Konfigurasi Pin PIC16F916-E/ML 28-pin vqfn with exposed pad (6 x 6 mm)
Konfigurasi pin untuk PIC16F916-E/ML (28-pin vqfn with exposed pad (6 x 6 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk PIC16F916-E/ML.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
PIC16F916-E/ML patut untuk 6 aplikasis: Industrial Control Panel, Temperature and Environmental Monitor, Timer and Sequence Controller, Small Motor and Valve Control, Standalone Instrument Front Panel, Battery-Powered Sensor Node.
Industrial Control Panel
The PIC16F916-E/ML fits an industrial control panel that combines a segment LCD, keypad input, analog sensing, and stored configuration. Its up to 60 LCD segment outputs reduce the need for external display drivers, while the 10-bit ADC can read temperature, pressure, or potentiometer inputs without a separate converter. The 256 bytes of EEPROM retains setpoints and calibration values across power cycles. A 20 MHz execution rate supports responsive keypad handling and display updates, while the -40°C to +125°C range covers controlled industrial environments.
Disebarkan
Temperature and Environmental Monitor
The PIC16F916-E/ML can serve as the controller in a temperature or environmental monitoring module by sampling a resistive or ratiometric sensor through its 10-bit ADC. EEPROM can store calibration coefficients and alarm thresholds, while timers provide periodic sampling without depending on a real-time clock. The internal 32 kHz-to-8 MHz oscillator permits low-power operation between measurements. Its 24 I/O pins leave interface capacity for a display, alarm output, relay driver, or communications transceiver.
Disebarkan
Timer and Sequence Controller
The PIC16F916-E/ML is appropriate for sequence controllers, timers, and small actuator managers that need deterministic timing with limited processing demand. Two 8-bit timers and one 16-bit timer support event intervals, delays, and pulse measurement, while the extended watchdog timer helps recover from stalled firmware. The 24 I/O pins can drive indicators and discrete interface signals, and 14 KB of flash is adequate for compact state machines. The -40°C to +125°C range supports operation in industrial cabinets.
Disebarkan
Small Motor and Valve Control
The PIC16F916-E/ML can coordinate stepper, solenoid, or simple valve sequencing in a compact actuator module. Its 20 MHz performance supports timely state-machine updates, and the timer resources allow controlled pulse timing without excessive polling. The 10-bit ADC can monitor a current-sense or position signal, while the extended watchdog timer improves recovery after faults. Firmware must include current limits, watchdog servicing, and safe output states because the microcontroller itself does not provide functional-safety certification.
Disebarkan
Standalone Instrument Front Panel
A standalone instrument front panel can use the PIC16F916-E/ML to drive a segment display, scan keys, read analog inputs, and expose status information through discrete I/O. The integrated LCD capability supports up to 60 segments, reducing board area compared with a separate display driver. EEPROM preserves user settings, and the 10-bit ADC supports front-panel sensor inputs. The small 6 x 6 mm VQFN footprint leaves room in dense instruments, although exposed-pad layout and thermal management remain important.
Disebarkan
Battery-Powered Sensor Node
The PIC16F916-E/ML can support battery-powered sensing when its internal oscillator and nanoWart low-power features are used to reduce active duty cycle. Periodic ADC readings can be processed by a compact firmware state machine, and the 256 bytes of EEPROM can retain calibration or a sample counter between sleep cycles. The device is best suited to low-duty-cycle measurements rather than continuous high-rate sampling. Power-budget calculations should include sensor standby current, ADC acquisition time, leakage, and wake-up requirements.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PIC16F916-E/ML — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | PIC16F916-I/ML | PIC16F913-I/ML | PIC16F913-E/ML | PIC16F914-I/ML | PIC16F914-E/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-VQFN Exposed Pad (6 x 6 mm) | 28-VQFN Exposed Pad - same footprint | 28-VQFN Exposed Pad - same footprint | 28-VQFN Exposed Pad - same footprint | 28-VQFN Exposed Pad - same footprint | 28-VQFN Exposed Pad - same footprint |
| CPU Architecture | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit |
| Temperature Grade | -40°C to +125°C (-E) | Industrial (-I) | Industrial (-I) | Extended (-E) | Industrial (-I) | Extended (-E) |
Penyeberangsung Jelas
- Largest verified same-footprint grade alternative (vsPIC16F916-I/ML)
- More memory and LCD capability within the PIC16F91X family (vsPIC16F913-I/ML)
- Integrated analog and display resources in one compact package (vsATTINY44A-MFR)
- Higher clock rate for responsive embedded control (vsATTINY13A-SUR)
Catatan Desain
Route the 28-pin VQFN exposed pad according to the Microchip package drawing, including the recommended via pattern and solder-mask clearance. The pad provides the primary thermal path for the 28-pin device and must not be treated as an unconnected center pin. Keep analog inputs, LCD outputs, and oscillator connections away from high-current switching nodes, and place input bypassing close to the VDD pins.
Base the low-power budget on the device's internal oscillator, ADC acquisition time, peripheral state, and required wake-up interval. A 20 MHz operating point reduces execution time but increases dynamic current compared with a slower clock. For battery-powered nodes, disable unused peripherals, configure unused I/O pins consistently, and use the extended watchdog timer as a recovery mechanism rather than allowing an indefinite busy loop.
Do not approve a same-package substitution solely by comparing the package outline. Verify each multifunction pin, ADC channel assignment, LCD segment mapping, oscillator source, programming pins, interrupt vector behavior, and exposed-pad connection. PIC16F913 and PIC16F914 candidates may share the 28-pin VQFN footprint while offering different memory, LCD, and peripheral resources, so firmware and hardware must be reviewed together.
Separate the LCD segment drive lines from sensitive analog inputs where practical and keep LCD connections short and confined to the board area associated with the display. Because LCD segment outputs are multiplexed with other functions on this device family, confirm the final pin multiplex configuration in the manufacturer pin table and data sheet before assigning external connector wiring.
Maklumat Kesediaan
RoHS compliance is indicated for the device. Automotive qualification, REACH status, halogen-free status, and conflict-minerals declarations were not established by the cited product information and should be confirmed for the exact ordering code.