Microchip Technology

PIC16F913-E/ML - 8-Bit 20MHz Flash MCU | Microchip

料号: PIC16F913-E/ML ✓ 量产中
28-pin QFN (6 × 6 mm) Package 20 MHz Speed 7 KB (4K × 14 words) Memory
最小起订量: 1 |

PIC16F913-E/ML 概述

The Microchip Technology PIC16F913-E/ML is an 8-bit PIC16 flash microcontroller with a 20 MHz maximum operating frequency, 7 KB of program Flash organized as 4K × 14 words, and a 28-pin QFN package measuring 6 × 6 mm. The device belongs to the PIC16F91x family and combines a RISC-based CPU, flash program memory, data RAM, LCD-drive resources, and embedded control peripherals in a compact surface-mount package.

An 8-bit flash microcontroller is a programmable controller that combines a CPU, nonvolatile program memory, working data memory, and peripherals such as timers, serial interfaces, analog inputs, and LCD outputs. The PIC16 architecture belongs to the broader embedded-controller hierarchy and is commonly used for cost-sensitive industrial control, instrumentation, appliance control, lighting, and small automation systems where deterministic control and compact firmware support are more important than high processing bandwidth.

Key features of the PIC16F913 include 7 KB (4K × 14) of flash program memory, 368 bytes of RAM, 25 I/O pins, an 8-bit CPU, and operation up to 20 MHz. The -E grade indicates the extended-temperature device designation, while /ML identifies the 28-pin QFN package option. Flash memory supports in-system programming and simplifies firmware updates compared with older one-time-programmable or ROM-based PIC devices.

The device uses a compact 14-bit PIC16 instruction architecture and integrates resources intended for embedded control. Its 25 I/O pins provide flexible digital interfaces, while the integrated LCD-driver capability supports display-oriented products without requiring a separate display controller. Timer and communication peripherals reduce external component count in control panels, while the 368-byte RAM provides working space for variables, status flags, and moderate protocol or control buffers.

Typical applications include industrial control panels, instrument displays, HVAC and building equipment, appliance controllers, LED lighting systems, and compact embedded products requiring both LCD and digital I/O. The 20 MHz operating ceiling allows faster control-loop execution than lower-speed PIC16 variants, while the 6 × 6 mm QFN package supports space-constrained board layouts requiring careful assembly planning and exposed-pad thermal management.

PCB implementation should follow the manufacturer pinout and land-pattern guidance, particularly for the thermal pad and exposed ground connection. Place decoupling capacitance near the supply pins, preserve short current paths, and verify the selected programming tool and connector against the PIC16F913 device family. Firmware validation should include operating-voltage limits, peripheral timing, LCD segment mapping, and temperature-specific boundary testing.

This product page combines the manufacturer device information, package and memory characteristics, selection guidance, practical implementation notes, and verified pin-compatible alternatives. It is intended to help engineers identify whether the PIC16F913-E/ML matches the required memory, I/O, temperature, package, display, and programming requirements before releasing a production design.

直接替换替代料: PIC16F913-E/ML ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PIC16F913-E/ML (相同外形与封装尺寸) ——差异在于 Architecture, Data RAM, Package, Program Memory, Programming Interface.

Microchip Technology
Architecture: 8-bit PIC MCU
Data RAM: 352 x 8 bits
Package: 28-pin VQFN with exposed pad (6 x 6 mm)

PIC16F913-I/ML

✅ 直接替换
📦 28-pin QFN (6 × 6 mm)
Temperature-grade code changes from E to I while the PIC16F913 platform, 28-pin QFN footprint, 20 MHz maximum frequency, 7 KB flash, 368-byte RAM, and 25 I/O pins remain the same

📋 参考替代料(不在目录中)

PIC16F913-E/ML 最大额定值与电气特性

Product Type 8-bit Flash Microcontroller
Maximum CPU Frequency 20 MHz
Program Memory 7 KB (4K × 14 words)
Data RAM 368 bytes
I/O Pins 25
Architecture PIC16 mid-range 14-bit RISC
封装 28-pin QFN (6 × 6 mm)
Package Type QFN-28
安装类型 Surface Mount
Program Memory Type Flash
LCD Drive Capability Yes
Instruction Set 14-bit
Programming Interface In-Circuit Programming

PIC16F913-E/ML qfn-28 引脚配置指南

PIC16F913-E/ML(qfn-28 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

PIC16F913-E/ML 的 qfn-28 封装引脚图

暂无详细引脚数据: PIC16F913-E/ML.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PIC16F913-E/ML 适用于 6 应用s: Industrial Control Panels, Instrument and Meter Displays, HVAC and Building Equipment, Appliance Control Modules, LED Lighting and Display Control, Compact Automation and Sensor Nodes.

🏭

Industrial Control Panels

PIC16F913-E/ML fits compact industrial control panels that combine 25 I/O pins, 7 KB of flash program memory, and LCD-drive resources. The 20 MHz clock supports responsive control tasks, while the 368-byte RAM holds operating state, counters, and communication buffers. Its 28-pin QFN package reduces board area compared with a larger leaded device, but the exposed-pad land pattern must be designed for reliable assembly and adequate heat spreading. Use the manufacturer pinout and programming guidance when assigning inputs, outputs, and the in-circuit programming interface.

📺

Instrument and Meter Displays

PIC16F913-E/ML is appropriate for compact meters and measurement instruments with local LCD feedback because the device integrates LCD-drive capability with a 7 KB flash memory footprint. The 8-bit CPU can execute display refresh, button handling, and basic control logic at an operating frequency up to 20 MHz. Its 25 I/O pins leave room for sensors, switches, alarm outputs, and programming signals. Designers should verify the exact segment and common-drive assignments against the intended LCD glass and validate contrast and timing across temperature.

🏭

HVAC and Building Equipment

PIC16F913-E/ML can serve as the embedded controller in HVAC modules, environmental equipment, and building-control products where a compact MCU, LCD support, and numerous discrete I/O are valuable. The flash-based 7 KB memory supports field programming and firmware revision, while the 368-byte RAM accommodates state variables and timing counters. The 20 MHz operating limit provides additional timing headroom over slower PIC16 options. Validate actuator drive levels, sensor interfaces, brownout behavior, and environmental limits against the final equipment specification.

🔧

Appliance Control Modules

PIC16F913-E/ML fits appliance-control modules that require coordinated digital inputs and outputs, nonvolatile firmware, and a low-profile controller package. Its 25 I/O pins can support keys, indicators, relays, interlocks, and external status signals, while the integrated LCD capability supports simple displays on premium appliances. The 8-bit PIC16 instruction architecture simplifies straightforward state-machine and timing control. Care is needed with inductive loads, noisy mains-connected interfaces, and thermal conditions, so isolation and protection belong in the surrounding circuitry.

💡

LED Lighting and Display Control

PIC16F913-E/ML can coordinate LED indication, status panels, and programmable lighting-control functions in a compact embedded system. Its 25 I/O pins provide multiple channels for indicator LEDs, switches, and control outputs, while the LCD-driver resources allow status information to be presented without a separate display controller. At up to 20 MHz, the MCU can divide its processing capacity among dimming timing, user-interface updates, and system monitoring. LED current regulation, thermal management, and flicker behavior remain external design responsibilities.

🧩

Compact Automation and Sensor Nodes

PIC16F913-E/ML is suitable for small automation controllers and sensor-interface nodes that need flexible digital connectivity, flash firmware, and local display or status feedback. The 368-byte RAM supports modest data buffering and protocol state, while the 20 MHz CPU provides useful timing margin. A 28-pin QFN footprint preserves board space in compact devices, although high-density assembly may require a board house experienced with fine-pitch QFN components. The application should include watchdog, reset, and brownout planning for reliable unattended operation.

推荐产品汇总

PIC16F913-I/ML Same-family 28-pin QFN option for industrial-temperature designs 用于: Industrial Control Panels, Instrument and Meter Displays, HVAC and Building Equipment, Appliance Control Modules, LED Lighting and Display Control, Compact Automation and Sensor Nodes
What are the key specifications of PIC16F913-E/ML that engineers should know?
The PIC16F913-E/ML is an 8-bit flash microcontroller rated up to 20 MHz, with 7 KB of flash program memory, 368 bytes of RAM, 25 I/O pins, and a 28-pin 6 × 6 mm QFN package. Microchip describes the PIC16F913 as a flash-based member of the PIC16F91x family. These figures make it suitable for compact embedded-control designs that need LCD drive capability, multiple digital I/O pins, and in-system programming without a larger processor package.
Where can I download the PIC16F913 datasheet PDF?
The official PIC16F913 family datasheet can be downloaded from the Microchip Technology document link on this page. The manufacturer document is titled “PIC16F913/914/916/917/946” and covers the devices, package variants, pin descriptions, memory organization, and electrical characteristics. Use the manufacturer PDF for final pin assignments, timing limits, electrical maximum ratings, and programming guidance rather than relying on distributor summaries.
Where can I find the PIC16F913 pinout?
The PIC16F913 pinout is documented in the manufacturer’s PIC16F913/914/916/917/946 datasheet, especially the pin-description and package-drawing sections. The PIC16F913-E/ML is the 28-pin QFN option, so its package drawing must be selected rather than the 40-, 44-, or 64-pin drawings for other family members. Confirm pin orientation, exposed-pad connection, and programming pins against the exact package before laying out a PCB.
What is the difference between PIC16F913-E/ML and PIC16F913-I/ML?
PIC16F913-I/ML is the closest same-package alternative to the PIC16F913-E/ML because it retains the 28-pin QFN package and the same PIC16F913 device identity. The principal documented difference is the temperature-grade code: the I/ML listing identifies the industrial temperature option, while the target uses the E designation. Both retain the 20 MHz class of CPU performance and 7 KB flash configuration, making the grade code the primary selection point.
Can PIC16F913-I/ML replace PIC16F913-E/ML as a drop-in part?
PIC16F913-I/ML is a mechanically compatible replacement candidate for PIC16F913-E/ML because both use the 28-pin QFN package and belong to the same device family. The replacement decision must still account for the different temperature-grade designation and the complete operating-temperature requirement of the finished product. Confirm that every electrical limit, peripheral configuration, and production-programming requirement remains acceptable before approving it as a drop-in substitution.
When should I choose PIC16F913-E/ML over another PIC16 controller?
Choose PIC16F913-E/ML when a design specifically requires its 20 MHz maximum clock, 7 KB flash memory, 368 bytes of RAM, 25 I/O pins, LCD-drive resources, and 28-pin QFN footprint. A larger-pin-count member may be preferable when more I/O is required, while another package can simplify hand assembly. The MCU choice should be locked to the complete set of memory, display, temperature, interface, and mechanical requirements.
Is PIC16F913-E/ML suitable for industrial control and instrument applications?
PIC16F913-E/ML is suitable for compact industrial-control and instrument applications that benefit from flash programmability, 25 I/O pins, LCD-drive capability, and an 8-bit control processor. The extended-temperature grade designation makes it more appropriate than a commercial-only option when the product must operate across a wider environmental range. Final qualification still requires comparing the complete operating-temperature limits against the enclosure temperature and worst-case operating conditions.
What can replace PIC16F913-E/ML?
PIC16F913-I/ML is the clearest replacement candidate because it uses the same 28-pin QFN package and the same PIC16F913 memory and peripheral platform, with the temperature-grade code as the distinguishing specification. A replacement should be treated as a controlled engineering change: verify the pinout, electrical limits, temperature requirements, programming configuration, and qualification records. Microchip’s selection tools should also be checked for the latest compatibility guidance.
Is there a cross-brand drop-in equivalent for PIC16F913-E/ML?
No verified cross-brand drop-in equivalent is established for PIC16F913-E/ML. A true substitute must match the 28-pin QFN footprint, pin assignments, flash organization, RAM, peripheral set, electrical limits, and programming requirements; matching only the clock rate and I/O count is insufficient for an MCU. Use the Request a Quote form on this page for sourcing assistance, and verify any proposed cross-brand device against the manufacturer datasheets before substitution.
How is PIC16F913-E/ML programmed?
PIC16F913-E/ML is programmed through its in-circuit programming interface, allowing firmware to be written while the device remains mounted on the target board. Microchip’s PIC16F913 product page identifies MPLAB PICkit 5 as a supported in-circuit debugger and programmer for PIC devices. Confirm the exact device family, connector, voltage levels, programming mode, and application-specific write-protection requirements in the development tool documentation.
What are the PIC16F913-E/ML memory and I/O characteristics?
PIC16F913-E/ML provides 7 KB of flash program memory organized as 4K × 14 words, 368 bytes of data RAM, and 25 I/O pins. Its CPU operates as an 8-bit RISC-based architecture at up to 20 MHz. This combination suits compact control products that need nonvolatile firmware, moderate working memory, numerous digital connections, and integrated LCD-drive resources in a 28-pin QFN package.
What are the benefits of the PIC16F913-E/ML 28-pin QFN package?
The 28-pin QFN package gives PIC16F913-E/ML a compact 6 × 6 mm footprint suitable for space-constrained control boards. QFN construction also supports short electrical connections and a low profile, but it is less forgiving than a leaded package during manual assembly. The design must follow the manufacturer land pattern and account for the exposed thermal pad, solder mask, paste pattern, reflow profile, and X-ray or cross-section inspection requirements.
Does PIC16F913-E/ML support LCD displays?
Yes, the PIC16F913 incorporates resources intended for LCD drive applications, making it useful for compact instrument panels and display-based controllers. The exact LCD segment and common-drive arrangement must be matched to the intended glass because package assignment and display requirements determine pin compatibility. Review the datasheet’s LCD tables and pin descriptions, then validate contrast, bias, switching, and endurance behavior with the selected display.
How do I compare PIC16F913-E/ML with PIC16F913-I/ML?
PIC16F913-E/ML and PIC16F913-I/ML share the PIC16F913 platform, 20 MHz maximum operating frequency, 7 KB flash memory, 368-byte RAM, 25 I/O pins, and 28-pin QFN package. Their meaningful selection difference is the temperature-grade designation. For a direct replacement, compare those grade codes with the product’s guaranteed temperature envelope and review all datasheet electrical limits before changing the released BOM.
Where can I buy PIC16F913-E/ML and check its lead time?
Use the Request a Quote form on this page to request PIC16F913-E/ML availability, current lead time, minimum order quantity, and order confirmation. The product is identified as a 28-pin QFN, 20 MHz, 8-bit flash MCU with 7 KB program memory. Commercial confirmation should include the exact suffix, package, quantity, and any required programming or traceability arrangements before procurement releases the order.
What is the current price and stock status of PIC16F913-E/ML?
Use the Request a Quote form on this page for the current commercial terms and availability of PIC16F913-E/ML. The form should be submitted with the required quantity, target date, and exact 28-pin QFN suffix so procurement can confirm supply without substituting a different package or temperature grade. Availability can change, so a quotation response should be used as the operational source for allocation and lead-time decisions.

工程参考数据: PIC16F913-E/ML ——对比、设计指导和合规信息。

选型指南

Choose PIC16F913-E/ML when the design requires the E temperature-grade device with a 20 MHz 8-bit PIC16 core, 7 KB flash, 368 bytes of RAM, 25 I/O pins, LCD-drive resources, and a 28-pin QFN footprint. PIC16F913-I/ML is the closest drop-in candidate when its I temperature grade satisfies the product requirements; it preserves the same package and key resources while changing the grade designation. No verified cross-brand substitute is established because an MCU replacement must also reproduce memory organization, peripheral behavior, pin functions, electrical limits, programming, and qualification. If the 25 available I/O pins, 368-byte RAM, or 7 KB flash are insufficient, move to a larger PIC16F91x family member rather than forcing a pin-incompatible part.

与替代料对比

参数 本产品 PIC16F913-I/ML
Brand Microchip Technology Microchip Technology
Package 28-pin QFN (6 × 6 mm) 28-pin QFN (6 × 6 mm)
Maximum CPU Frequency 20 MHz 20 MHz
Program Memory 7 KB (4K × 14 words) 7 KB (4K × 14 words)
Data RAM 368 bytes 368 bytes
I/O Pins 25 25
Architecture 8-bit PIC16 RISC 8-bit PIC16 RISC
Program Memory Type Flash Flash
LCD Drive Capability Yes Yes
Temperature Grade E grade I grade

关键差异点

  • Compact display-capable control platform (对比 PIC16F913-I/ML)
  • Memory and peripheral set (对比 PIC16F913-I/ML)
  • Production PCB compatibility (对比 PIC16F913-I/ML)

设计说明

Follow the manufacturer’s 28-pin QFN land pattern exactly, including the exposed thermal pad, solder-mask opening, and paste stencil geometry. Place the required supply decoupling capacitor adjacent to the device power pins and keep high-current return paths short. Because QFN leads are difficult to inspect visually, define an appropriate X-ray or cross-section inspection method for production.

Verify the final rail voltage, brownout behavior, input thresholds, and I/O injection limits against the PIC16F913 datasheet before connecting external signals. Use the manufacturer’s recommended decoupling arrangement and account for voltage transients from motors, relays, or long wiring. A regulated supply alone does not guarantee safe operation; the worst-case startup and shutdown states must also remain within the device limits.

Do not select the replacement solely because both devices use a QFN package. PIC16F913-I/ML differs by temperature-grade designation, so compare its guaranteed operating-temperature range with the product’s worst-case ambient and internal temperature. Also confirm programming, configuration, and peripheral compatibility before treating it as a production drop-in replacement.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The device family includes LCD-drive and nanoWatt technology, but exact RoHS, REACH, halogen-free, and conflict-minerals declarations for this suffix were not established. AEC-Q100 qualification is not indicated by the E suffix, which denotes an extended-temperature grade rather than automotive qualification.

相关搜索

pic16f913 pinout pic16f913 datasheet pic16f913 pdf pic16f913 datasheet pdf PIC16F913-E/ML datasheet PIC16F913-E/ML pinout PIC16F913-E/ML equivalent PIC16F913-E/ML replacement PIC16F913-E/ML price PIC16F913-E/ML stock Microchip PIC16F913-E/ML PIC16F913-E/ML vs PIC16F913-I/ML PIC16F913 20MHz flash microcontroller PIC16F913 28-QFN footprint PIC16F913 industrial control application

相关元器件 & 术语

Microchip Technology PIC16F913-E/ML PIC16F913-I/ML PIC16F913 PIC16F91x 8-bit microcontroller flash microcontroller RISC architecture embedded controller program Flash 368-byte RAM 25 I/O pins LCD driver 28-pin QFN QFN family surface-mount package in-circuit programming MPLAB PICkit 5 20 MHz industrial control panel instrument display HVAC controller appliance control LED lighting control
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情