PIC16F914-I/ML - 8-Bit 20MHz Flash MCU | Microchip
MPN: PIC16F914-I/ML ✓ ActivePIC16F914-I/ML Overview
A flash-based PIC16 microcontroller is an 8-bit RISC-style embedded controller in the broader semiconductor and microcontroller hierarchy. Unlike simple logic controllers, a PIC16 MCU integrates flash program memory, data EEPROM, timers, oscillator options, interrupt handling, and digital I/O. This integration allows a compact product to perform control, measurement, timing, display scanning, and communications-interface tasks without a separate processor.
The PIC16F914-I/ML offers 7 KB of flash memory, 256 bytes of data EEPROM, 36 I/O pins, and operation from 2.0 V to 5.5 V. Its internal oscillator options extend from 32 kHz to 8 MHz, while the device supports a 20 MHz operating speed. Two 8-bit timers, one 16-bit timer, an extended watchdog timer, and I/O source or sink capability of 25 mA make the device suitable for embedded products requiring both timing precision and mixed signal-generation duties.
The flash architecture permits in-circuit reprogramming and supports development with the MPLAB toolchain and compatible programmers such as the MPLAB PICkit 5. The manufacturer’s product page identifies the MPLAB PICkit 5 as a production-capable programming and debug option for PIC devices. Firmware can therefore be developed, programmed, and revised without relying on a one-time-programmable device, while the 4K-word program space accommodates structured interrupt routines, state machines, and application logic.
Typical applications include industrial control panels, instrument panels, small displays, environmental monitors, data-acquisition modules, and embedded control subsystems. The LCD-driver capability is particularly useful for numeric or segmented human-machine interfaces, while the 36 I/O pins reduce the need for external I/O expansion in compact industrial equipment. The 2.0–5.5 V operating range also supports low-voltage designs where system power must be tightly controlled.
For PCB design, treat the 44-QFN package as a thermal and assembly challenge rather than a conventional leaded footprint. Use the manufacturer’s land pattern, maintain solder-mask and paste consistency, and verify the exposed-pad connection against the package drawing. Software should use the appropriate oscillator, watchdog, and brown-out configuration appropriate to the intended power and reset behavior.
This product record combines the manufacturer’s device overview, distributor technical summaries, package and memory details, programming support, application context, and verified drop-in alternatives. It is designed to help engineers identify whether the PIC16F914-I/ML matches the required memory, display, timing, voltage, package, and programming constraints of an embedded-control design.
Drop-in alternatives for PIC16F914-I/ML — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with PIC16F914-I/ML (same form factor and footprint) — differing in Package, Number of I/O Pins, ADC, Architecture, Core.
PIC16F914-E/ML
✅ Drop-InContact for price
View Datasheet →PIC16F914T-I/ML
✅ Drop-In📋 Reference alternative (not in catalog)
PIC16F914-I/ML Maximum Ratings & Electrical Characteristics
| Product Type | 8-bit flash-based PIC16 microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Flash Program Memory | 7 KB (4K × 14 words) |
| Data EEPROM | 256 bytes |
| Number of I/O Pins | 36 |
| LCD Segment Support | Up to 96 segments |
| Operating Voltage Range | 2.0 V to 5.5 V |
| Internal Oscillator Range | 32 kHz to 8 MHz |
| 8-Bit Timers | 2 timers |
| 16-Bit Timers | 1 timer |
| Watchdog Timer | Extended Watchdog Timer (EWDT) |
| I/O Source or Sink Current | 25 mA |
| Architecture | 8-bit PIC RISC core |
| Program Memory Type | Flash |
| Package | 44-QFN, 8 mm × 8 mm |
| Mounting Type | Surface mount |
| Temperature Grade | Industrial grade, -40 °C to +85 °C |
| Low-Power Technology | nanoWatt Technology |
| Programming Support | MPLAB toolchain and MPLAB PICkit 5 |
PIC16F914-I/ML 44-qfn, 8 mm × 8 mm Pin Configuration Guide
Pin configuration for PIC16F914-I/ML (44-qfn, 8 mm × 8 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for PIC16F914-I/ML.
Refer to the datasheet for full pin configuration.
Typical Applications
PIC16F914-I/ML is suitable for 6 applications: Industrial Control Panel, Segmented Instrument Display, Environmental Monitoring, Data Acquisition Controller, Small-System Display Controller, Programmable Logic Control.
Industrial Control Panel
The PIC16F914-I/ML fits compact industrial control panels that combine segmented LCD indication with ordinary digital controls. Its support for up to 96 LCD segments reduces the need for a separate display-driver device, while 36 I/O pins leave capacity for switches, indicators, relays, and alarm inputs. At a maximum 20 MHz, the 8-bit controller can service display scanning and deterministic control routines, while the 7 KB flash capacity accommodates panel state logic, input debouncing, and communications handling. The 2.0–5.5 V range also permits integration into either legacy 5 V or lower-voltage control electronics.
Recommended
Segmented Instrument Display
The PIC16F914-I/ML is appropriate for measuring instruments that use multiplexed segment LCDs rather than a graphic display. Up to 96 LCD segments allow one MCU to drive numeric readouts, status indicators, and operating modes while retaining 36 I/O pins for sensors and controls. The manufacturer identifies nanoWatt Technology and selectable internal oscillators from 32 kHz to 8 MHz, supporting designs that can reduce clock activity when full processing speed is unnecessary. Its 256-byte EEPROM is also useful for retaining calibration or configuration data without using the main program-memory budget.
Recommended
Environmental Monitoring
The PIC16F914-I/ML can serve as the control hub in a low-power environmental monitor that reads sensors, drives a segmented display, and records operating state. The 36 I/O pins provide ample digital channels for digital sensors and alarm outputs, and the 20 MHz maximum rate allows responsive sensor polling and timing. Internal oscillator choices down to 32 kHz support slower duty-cycled operation, while EEPROM preserves calibration constants or counters. Engineers should verify analog interface requirements separately because no ADC specification is established for this part.
Recommended
Data Acquisition Controller
The PIC16F914-I/ML fits compact data-acquisition controllers built around digital sensors, switch inputs, and local status indication. Its 7 KB flash memory can hold sampling schedules, filtering routines, calibration tables, and a communication state machine, while two 8-bit timers and one 16-bit timer support precise interval generation and event counting. The 36 available I/O pins simplify distributed peripheral connections. For mixed-signal measurement, add an external converter because the available controller specifications do not establish an on-chip ADC function.
Recommended
Small-System Display Controller
A dedicated display controller built around PIC16F914-I/ML can update alphanumeric segments, scan status indicators, and respond to front-panel inputs without using a higher-cost processor. Its integrated LCD resources support as many as 96 segments, and the 20 MHz CPU ceiling provides margin for button handling, animation, and menu logic. The 256-byte EEPROM can hold configuration values, while flash supports firmware revision through in-circuit programming. A designer should confirm the target LCD’s segment and common-drive requirements against the manufacturer’s electrical characteristics before layout release.
Recommended
Programmable Logic Control
The PIC16F914-I/ML can replace a collection of discrete timers, counters, and fixed-function controllers in a small automation subsystem. Two 8-bit timers plus one 16-bit timer enable event counting, periodic generation, and longer timing intervals, while the extended watchdog timer supports recovery from unexpected firmware states. Thirty-six I/O pins connect to sensors, actuators, and interlock signals. Flash-based firmware makes operating logic easier to revise, but the 4K × 14-word program space should be checked against the complete control application.
Recommended
Recommended Products Summary
Engineering reference data for PIC16F914-I/ML — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PIC16F914-E/ML | PIC16F914T-I/ML |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8x8 mm) | 44-QFN (8x8 mm) | 44-QFN (8x8 mm) |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz |
| Flash Program Memory | 7 KB (4K × 14 words) | 7 KB (4K × 14 words) | 7 KB (4K × 14 words) |
| Data EEPROM | 256 bytes | 256 bytes | 256 bytes |
| I/O Pins | 36 | 36 | 36 |
| LCD Segment Support | Up to 96 segments | Up to 96 segments | Up to 96 segments |
| Operating Voltage Range | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Internal Oscillator Range | 32 kHz to 8 MHz | 32 kHz to 8 MHz | 32 kHz to 8 MHz |
| Temperature Grade | -40 °C to +85 °C | -40 °C to +125 °C | -40 °C to +85 °C |
| Programming Support | MPLAB toolchain and MPLAB PICkit 5 | MPLAB toolchain and MPLAB PICkit 5 | MPLAB toolchain and MPLAB PICkit 5 |
| Low-Power Technology | nanoWatt Technology | nanoWatt Technology | nanoWatt Technology |
Key Differentiators
- Integrated segmented-LCD resources (vs PIC16F914-E/ML)
- Industrial temperature coverage at the lower upper-temperature limit (vs PIC16F914-E/ML)
- Compact 8-bit control with dedicated timing resources (vs PIC16F914T-I/ML)
- Flash-based field-reprogrammability (vs PIC16F914T-I/ML)
Design Notes
Use the Microchip 44-QFN land pattern and exposed-pad recommendations rather than generating a generic QFN footprint. The 8 × 8 mm package has closely spaced perimeter terminals and a central thermal pad, so paste volume, solder-mask dam dimensions, and pad geometry should follow the current package drawing. Confirm whether the exposed pad connects to VSS on the final board because incorrect treatment can affect thermal performance, assembly yield, and electromagnetic behavior.
Keep the 2.0–5.5 V supply requirement synchronized with the selected clock configuration and attached peripherals. The internal oscillator supports 32 kHz to 8 MHz, while the maximum CPU rate is 20 MHz; not every operating voltage is intended to combine with every clock source. Review the manufacturer’s electrical-characteristics tables before fixing VDD, decoupling, and brown-out behavior, and include local bulk and high-frequency decoupling close to the supply pins.
Do not treat the 20 MHz headline rate as permission to use every clock mode at every supply voltage. Likewise, verify the LCD drive requirement against the actual panel, including segment count, common outputs, bias, and timing. Confirm the I/O current limitation of 25 mA for each pin and the total port or package limits before driving relays, indicators, or other loads directly.
Separate LCD-segment routing from sensitive measurement and communication paths to reduce capacitive coupling into the display system. Keep oscillator and programming-interface traces away from high-switching nodes, follow the manufacturer’s decoupling guidance, and provide a clean ground reference for the exposed pad. During prototype bring-up, verify programming and debug access before surrounding circuitry is finalized so an ICSP connector can be placed without long or unintended signal routes.
Compliance Information
The PIC16F914-I/ML is an industrial-grade embedded microcontroller rather than an AEC-Q100 automotive device. Manufacturer or manufacturer-authoritative compliance documents are required before assigning RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.