SI3230-E-FT Single-Channel SLIC with DC-DC Converter | Skyworks
MPN: SI3230-E-FT ✗ Akhir HayatSI3230-E-FT Ringkasan
A Subscriber Line Interface Circuit, or SLIC, is the analog front-end category that connects a telephone line to a digital voice processor. In the system hierarchy, a SLIC is a telecom interface IC that performs line driving, line sensing, ring-voltage generation, and DTMF handling. The SI3230 ProSLIC places these functions into a single low-voltage CMOS device while using an external codec for the voice-processing path.
Key features include software-programmable internal balanced ringing up to 90 VPK, support for 5 REN at 4 kft or 3 REN at 8 kft, an integrated battery supply, a DTMF decoder, and a SPI interface for configuration and control. The BJT/inductor DC-DC converter provides the elevated line-side biasing required by analog telephone interfaces while the low-voltage core remains compatible with 3.13 V to 5.25 V system rails.
The SI3230-E-FT is designed for compact analog telephone interfaces when connected to an external codec. Its single-channel architecture suits one-line adapters, analog phones, terminal adapters, small PBX peripheral cards, and legacy voice gateways. The 90 VPK balanced ringing capability allows one device to generate the line voltage required by conventional analog handsets without a separate discrete ringer circuit.
When designing the line-side network, account for the relationship between REN, loop length, and ringing voltage. The published ringing limits of 5 REN at 4 kft and 3 REN at 8 kft mean that a long loop reduces the permissible load. External protection, filtering, and the line-interface network still require attention because the SLIC controls line-side generation but does not remove the need for overvoltage and surge protection.
This page combines the device functions, published operating limits, sourcing information, application fit, and verified manufacturer documentation in one engineering reference. It also distinguishes the functional role of the ProSLIC from that of a codec, a host-side SIP interface, or a discrete DTMF transceiver so that board designers can select the correct component for each block of a legacy voice design.
Pilihan pengganti yang segera untuk SI3230-E-FT — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifSI3230-E-FT Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Single-channel ProSLIC with DTMF decoder and BJT/inductor DC-DC converter |
| Number of Channels | 1 channel |
| Supply Voltage Range | 3.13 V to 5.25 V |
| Arus Pemberi Arus | 88 mA |
| Power Dissipation | 700 mW |
| Control Interface | SPI |
| Internal Balanced Ringing Voltage | 90 VPK maximum |
| Ringing Load at 4 kft | 5 REN |
| Ringing Load at 8 kft | 3 REN |
| DTMF Functions | DTMF detection and generation |
| Codec Connection | External codec required |
| DC-DC Converter Topology | BJT/inductor |
| Battery Supply | Integrated |
| Technology | Low-voltage CMOS |
| Lead-Free Status | Lead Free |
| RoHS Features | RoHS features indicated in the product listing |
| Device Description | Telecom interface IC for a complete analog telephone interface with an external codec |
Panduan Konfigurasi Pin SI3230-E-FT standard
Konfigurasi pin untuk SI3230-E-FT (standard pakai). Peranti kuasa ini mempunyai terminal kawat, buang, dan sumber. Untuk pakai non-polarized, rujuk dokumen pengeluar untuk orientasi pin 1 tepat dan perincian kebentuk.
Tiada data garisan pin yang diperoleh untuk SI3230-E-FT.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
SI3230-E-FT patut untuk 6 aplikasis: Analog Telephone Adapter, Single-Line PBX Peripheral Card, Legacy Voice Gateway, Analog Desk Phone Interface, Remote Terminal Equipment, Analog Fax or Telephony Terminal.
Analog Telephone Adapter
The SI3230-E-FT fits a single-line analog telephone adapter because it combines the line-side SLIC, DTMF handling, and a BJT/inductor DC-DC converter in one low-voltage CMOS device. Its 3.13 V to 5.25 V operating range supports conventional digital logic supplies, while the internal balanced ringing generator reaches 90 VPK for handset activation. The external codec remains responsible for voice conversion. Designers should size the line network and protection around the published limit of 5 REN at 4 kft and 3 REN at 8 kft.
Disebarkan
Single-Line PBX Peripheral Card
A compact PBX peripheral card can use the SI3230-E-FT as the subscriber-line interface for one analog extension. The SPI interface allows a host controller to configure the software-programmable line behavior, and the integrated DC-DC converter supports the elevated line-side bias required by analog handsets. With one channel per device, a card that supports multiple lines can repeat the circuit rather than multiplexing telephone loops through a single SLIC.
Disebarkan
Legacy Voice Gateway
The SI3230-E-FT is appropriate for a legacy voice gateway that must bridge a physical analog line to a digital voice subsystem. Its SLIC performs line termination and ringing, while an external codec handles the voice path. The 90 VPK balanced ring source and programmable internal behavior reduce the need for a separate line-interface controller. Gateways should still implement surge protection, proper line-network balancing, and fault supervision around the analog line interface.
Disebarkan
Analog Desk Phone Interface
A desk-phone interface board can place the SI3230-E-FT beside an external codec to form a complete analog handset connection. The device handles the physical line, DTMF detection and generation, ringing generation, and line-side voltage conversion without requiring separate discrete subscriber-line circuitry. Its single-channel structure matches a one-handset design, and the SPI control path allows operating parameters to be loaded by the telephone controller during initialization.
Disebarkan
Remote Terminal Equipment
The SI3230-E-FT can support remote terminal equipment that terminates an analog subscriber line over copper. Its integrated BJT/inductor DC-DC converter develops the line-side bias while the low-voltage CMOS core operates from 3.13 V to 5.25 V. Software-programmable balanced ringing up to 90 VPK allows the unit to drive a conventional analog handset. Deployment near a network boundary requires the usual line protection and isolation appropriate to external copper interfaces.
Disebarkan
Analog Fax or Telephony Terminal
The SI3230-E-FT is suitable for a dedicated analog fax or telephony terminal that needs a complete subscriber-line interface rather than only a codec. It provides DTMF detection and generation, balanced ringing, integrated battery supply, and a BJT/inductor DC-DC converter around one analog line. Since the device has a single channel, multi-line terminal designs require one SI3230 circuit per line. The 88 mA listed supply current should be included in the terminal's overall power budget.
Disebarkan
Data referensi kejuruteraan untuk SI3230-E-FT — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Brand | Skyworks Solutions |
| Number of Channels | 1 channel |
| Supply Voltage Range | 3.13 V to 5.25 V |
| Supply Current | 88 mA |
| Power Dissipation | 700 mW |
| Control Interface | SPI |
| Maximum Balanced Ringing Voltage | 90 VPK |
| Ringing Load | 5 REN at 4 kft; 3 REN at 8 kft |
| Codec | External codec required |
Penyeberangsung Jelas
- Combines subscriber-line and DC-DC functions in one device (vsMC14C88BP)
- Provides programmable balanced line ringing (vsMC14C88BP)
- Integrates the line-side DC-DC converter (vsDiscrete SLIC implementations)
Catatan Desain
Design the low-voltage supply for 3.13 V to 5.25 V and include the listed 88 mA supply current in the system budget. The integrated BJT/inductor DC-DC converter provides the elevated line-side bias, but its inductor and switching components still require correct layout. Follow the manufacturer recommended-application circuit for the converter inductor, feedback network, and capacitor types rather than substituting general-purpose parts without checking the datasheet guidance.
Keep the telephone-line network, protection components, and DC-DC converter power loop physically separate from sensitive logic and codec routing. The converter inductor can radiate magnetic and switching noise, so minimize the high-current loop and place filtering and line-protection components close to the connector entry. Use the pin-description and layout guidance in the Si3230 ProSLIC datasheet when assigning traces and ground returns.
Do not treat the 90 VPK ringing rating as permission to omit external line protection. Balance the line network correctly and respect the REN-versus-loop-length limits: 5 REN at 4 kft and 3 REN at 8 kft. Also avoid assuming that an ordering code with a different suffix is drop-in compatible, because the suffix may identify a different package or delivery configuration with different terminal assignments.
Maklumat Kesediaan
Product listings identify the device as lead-free and indicate RoHS features. Formal declarations for the exact legacy package and sourcing condition should be confirmed during procurement.