Skyworks Solutions

SI3230-E-FT Single-Channel SLIC with DC-DC Converter | Skyworks

MPN: SI3230-E-FT ✗ Son Kullanım Zamanı
3.13 V to 5.25 V Vdss 88 mA Id
MOQ: 1 |

SI3230-E-FT Genel Bakış

The Skyworks Solutions SI3230-E-FT is a single-channel, low-voltage CMOS ProSLIC that combines a Subscriber Line Interface Circuit with DTMF detection and generation functions, an external-codec interface, and a BJT/inductor DC-DC converter. It operates from a 3.13 V to 5.25 V supply, draws 88 mA, and is rated at 700 mW, making it suited to compact analog telephone and legacy voice endpoint designs.

A Subscriber Line Interface Circuit, or SLIC, is the analog front-end category that connects a telephone line to a digital voice processor. In the system hierarchy, a SLIC is a telecom interface IC that performs line driving, line sensing, ring-voltage generation, and DTMF handling. The SI3230 ProSLIC places these functions into a single low-voltage CMOS device while using an external codec for the voice-processing path.

Key features include software-programmable internal balanced ringing up to 90 VPK, support for 5 REN at 4 kft or 3 REN at 8 kft, an integrated battery supply, a DTMF decoder, and a SPI interface for configuration and control. The BJT/inductor DC-DC converter provides the elevated line-side biasing required by analog telephone interfaces while the low-voltage core remains compatible with 3.13 V to 5.25 V system rails.

The SI3230-E-FT is designed for compact analog telephone interfaces when connected to an external codec. Its single-channel architecture suits one-line adapters, analog phones, terminal adapters, small PBX peripheral cards, and legacy voice gateways. The 90 VPK balanced ringing capability allows one device to generate the line voltage required by conventional analog handsets without a separate discrete ringer circuit.

When designing the line-side network, account for the relationship between REN, loop length, and ringing voltage. The published ringing limits of 5 REN at 4 kft and 3 REN at 8 kft mean that a long loop reduces the permissible load. External protection, filtering, and the line-interface network still require attention because the SLIC controls line-side generation but does not remove the need for overvoltage and surge protection.

This page combines the device functions, published operating limits, sourcing information, application fit, and verified manufacturer documentation in one engineering reference. It also distinguishes the functional role of the ProSLIC from that of a codec, a host-side SIP interface, or a discrete DTMF transceiver so that board designers can select the correct component for each block of a legacy voice design.

Drop-in alternatifler için SI3230-E-FT — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

SI3230-E-FT Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Single-channel ProSLIC with DTMF decoder and BJT/inductor DC-DC converter
Number of Channels 1 channel
Supply Voltage Range 3.13 V to 5.25 V
Besleme Akımı 88 mA
Power Dissipation 700 mW
Control Interface SPI
Internal Balanced Ringing Voltage 90 VPK maximum
Ringing Load at 4 kft 5 REN
Ringing Load at 8 kft 3 REN
DTMF Functions DTMF detection and generation
Codec Connection External codec required
DC-DC Converter Topology BJT/inductor
Battery Supply Integrated
Technology Low-voltage CMOS
Lead-Free Status Lead Free
RoHS Features RoHS features indicated in the product listing
Device Description Telecom interface IC for a complete analog telephone interface with an external codec

SI3230-E-FT standard Pin Yapısı Kılavuzu

SI3230-E-FT (standard paket) için pin yapısı. Bu güç cihazı gate, drain ve kaynak terminal özelliklerlidir. Polarizasyonlu paketler için, doğru pin 1 yönlendirme ve ayak detayları için üretici veri kitapçığını referans alın. Orta uygulamalar arasında güç besleme tasarımı, motor kontrolü ve yük değiştirme bulunur.

standard paket pin çizelgesi için SI3230-E-FT

Ayrıntılı pin çıkış verisi mevcut değil: SI3230-E-FT.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

SI3230-E-FT için uygundur 6 uygulamas: Analog Telephone Adapter, Single-Line PBX Peripheral Card, Legacy Voice Gateway, Analog Desk Phone Interface, Remote Terminal Equipment, Analog Fax or Telephony Terminal.

☎️

Analog Telephone Adapter

The SI3230-E-FT fits a single-line analog telephone adapter because it combines the line-side SLIC, DTMF handling, and a BJT/inductor DC-DC converter in one low-voltage CMOS device. Its 3.13 V to 5.25 V operating range supports conventional digital logic supplies, while the internal balanced ringing generator reaches 90 VPK for handset activation. The external codec remains responsible for voice conversion. Designers should size the line network and protection around the published limit of 5 REN at 4 kft and 3 REN at 8 kft.

🏭

Single-Line PBX Peripheral Card

A compact PBX peripheral card can use the SI3230-E-FT as the subscriber-line interface for one analog extension. The SPI interface allows a host controller to configure the software-programmable line behavior, and the integrated DC-DC converter supports the elevated line-side bias required by analog handsets. With one channel per device, a card that supports multiple lines can repeat the circuit rather than multiplexing telephone loops through a single SLIC.

🌐

Legacy Voice Gateway

The SI3230-E-FT is appropriate for a legacy voice gateway that must bridge a physical analog line to a digital voice subsystem. Its SLIC performs line termination and ringing, while an external codec handles the voice path. The 90 VPK balanced ring source and programmable internal behavior reduce the need for a separate line-interface controller. Gateways should still implement surge protection, proper line-network balancing, and fault supervision around the analog line interface.

📞

Analog Desk Phone Interface

A desk-phone interface board can place the SI3230-E-FT beside an external codec to form a complete analog handset connection. The device handles the physical line, DTMF detection and generation, ringing generation, and line-side voltage conversion without requiring separate discrete subscriber-line circuitry. Its single-channel structure matches a one-handset design, and the SPI control path allows operating parameters to be loaded by the telephone controller during initialization.

🖥️

Remote Terminal Equipment

The SI3230-E-FT can support remote terminal equipment that terminates an analog subscriber line over copper. Its integrated BJT/inductor DC-DC converter develops the line-side bias while the low-voltage CMOS core operates from 3.13 V to 5.25 V. Software-programmable balanced ringing up to 90 VPK allows the unit to drive a conventional analog handset. Deployment near a network boundary requires the usual line protection and isolation appropriate to external copper interfaces.

🖨️

Analog Fax or Telephony Terminal

The SI3230-E-FT is suitable for a dedicated analog fax or telephony terminal that needs a complete subscriber-line interface rather than only a codec. It provides DTMF detection and generation, balanced ringing, integrated battery supply, and a BJT/inductor DC-DC converter around one analog line. Since the device has a single channel, multi-line terminal designs require one SI3230 circuit per line. The 88 mA listed supply current should be included in the terminal's overall power budget.

What is the SI3230-E-FT used for?
The SI3230-E-FT is used as a single-channel analog telephone interface by combining SLIC functions, DTMF detection and generation, an SPI control interface, and a BJT/inductor DC-DC converter. According to the manufacturer ProSLIC documentation, it supplies the line-side functions required when the device is connected to an external codec. It is therefore positioned between the physical telephone line and the voice codec rather than serving as a standalone audio converter.
What is the operating voltage of SI3230-E-FT?
The SI3230-E-FT operates from 3.13 V to 5.25 V. The manufacturer datasheet describes the Si3230 ProSLIC as a single low-voltage CMOS device, while distributor specifications identify the same 3.13 V minimum and 5.25 V maximum supply limits. Designers should use this range for the low-voltage core supply and follow the application circuit in the datasheet when implementing the line-side bias network.
What is the maximum balanced ringing voltage of SI3230-E-FT?
The SI3230-E-FT supports software-programmable internal balanced ringing up to 90 VPK. The published loading limits are 5 REN at 4 kft and 3 REN at 8 kft. These two conditions are tied to each other: moving from the shorter 4 kft loop to the longer 8 kft loop reduces the permitted ringing load from 5 REN to 3 REN.
Does the SI3230-E-FT include a codec?
No, the SI3230-E-FT requires an external codec. The manufacturer documentation states that the Si3230 ProSLIC provides the SLIC, DTMF detection, and signal-generation functions needed for a complete analog telephone interface when it is connected to an external codec. The SLIC handles the telephone line, while the external codec performs the voice-signal conversion between the line interface and the digital processing system.
What interface does the SI3230-E-FT use for configuration?
The SI3230-E-FT uses an SPI interface for configuration and control. Product specifications identify the interface as SPI and describe the SLIC as software-programmable. A host processor therefore uses the serial interface to configure operating parameters and supervise the line interface, including the software-programmable balanced ringing behavior.
How much supply current does the SI3230-E-FT consume?
The SI3230-E-FT has a listed supply current of 88 mA. The same product listing identifies a 700 mW power rating and a 3.13 V to 5.25 V operating range. Current consumption will vary with operating mode, line activity, and the selected configuration, so the 88 mA figure should be checked against the worst-case conditions used in the system power budget.
Where can I download the SI3230-E-FT datasheet PDF?
The SI3230-E-FT datasheet PDF is available through the manufacturer document hosted at Mouser as silicon_laboratories_230.pdf. The document is titled si3230rev0_96 and describes the Si3230 ProSLIC, including its SLIC, DTMF, signal-generation, and external-codec functions. Use that document for pin-level design decisions and confirm the package-specific information against the ordering code being sourced.
Where can I find the SI3230-E-FT pinout?
The SI3230-E-FT pinout and pin descriptions are in the manufacturer Si3230 ProSLIC datasheet. The downloadable silicon_laboratories_230.pdf document contains the package drawing, terminal assignments, and recommended application information. Engineers should assign PCB tracks from the package-specific terminal table rather than inferring line-side functions from the generic block diagram.
Is the SI3230-E-FT suitable for a long-loop analog phone line?
The SI3230-E-FT is suitable for analog line designs within its published loading envelope, but long loops reduce the available ringing load. The device supports 5 REN at 4 kft and 3 REN at 8 kft according to the product specifications. A design near the 8 kft limit must therefore use no more than the stated 3 REN and should include the appropriate line protection and filtering network.
What is the best drop-in replacement for SI3230-E-FT?
No pin-compatible drop-in replacement is confirmed for the SI3230-E-FT. The Si3230-E-FTR ordering code is a packaging form of the same device rather than an electrically different alternative, and the Si3230-E-FM code cannot be treated as drop-in without matching package and terminal data. Use the Request a Quote form on this page when sourcing the exact ordering code, and request lifecycle confirmation before committing a new design.
Can SI3230-E-FM replace SI3230-E-FT?
The SI3230-E-FM should not be assumed to be a direct replacement for the SI3230-E-FT. Both belong to the Si3230 product family, but an ordering-code suffix can identify a different package or delivery configuration, and package and terminal differences prevent a drop-in substitution. Confirm the package drawing, pin list, and electrical limits in the manufacturer documentation before using the -FM variant.
When should I choose the SI3230-E-FT instead of a host-side SIP interface?
Choose the SI3230-E-FT when the design must terminate a physical analog telephone line, while a host-side SIP interface is appropriate for an already-digitized network endpoint. The SI3230-E-FT provides line driving, sensing, ringing, DTMF handling, and DC-DC conversion around an external codec. It does not replace a SIP controller or network interface because its control function is configuration over SPI rather than SIP signaling.
Where can I buy SI3230-E-FT online?
Use the Request a Quote form on this page to request the SI3230-E-FT and obtain current availability, package quantity, and lead-time confirmation. The device is listed by major component distributors, but this page does not quote a fixed current price because legacy telecom-interface inventory changes independently of catalog pricing. Confirm the exact suffix and delivery condition when submitting the request.
What is the price of SI3230-E-FT?
Current price for the SI3230-E-FT is best obtained through the Request a Quote form on this page. The part is an obsolete legacy ProSLIC, so distributor stock can be limited and pricing may depend on package quantity, condition, and sourcing channel. Providing the exact MPN and required quantity with the request allows a current quotation to be returned for the same ordering code.
What is the lead time and stock status of SI3230-E-FT?
Stock and lead time for the SI3230-E-FT should be confirmed through the Request a Quote form on this page. Because the part is cataloged as obsolete, available quantities may come from limited distribution or legacy inventory rather than regular production. Specify the required package quantity and delivery date in the request, and avoid committing a design that depends on unconfirmed recurring supply.
What are the key specifications of SI3230-E-FT that engineers should know?
The key SI3230-E-FT specifications are a 3.13 V to 5.25 V supply range, 88 mA supply current, 700 mW power rating, single-channel ProSLIC architecture, and SPI configuration interface. Its line-side functions include DTMF detection and generation, an integrated battery supply, a BJT/inductor DC-DC converter, and balanced ringing up to 90 VPK. The stated ringing loads are 5 REN at 4 kft and 3 REN at 8 kft.
Is SI3230-E-FT RoHS compliant and lead-free?
The SI3230-E-FT is identified as lead-free in the product specifications, and its listing also indicates RoHS features. Formal RoHS and REACH declarations should be confirmed for the exact legacy inventory and delivery condition through the Request a Quote form. Automotive qualification does not apply to this telecom interface device, and no AEC-Q100 qualification is claimed.

Mühendislik referans verileri: SI3230-E-FT — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the SI3230-E-FT for a legacy analog-line design that needs one SLIC channel, programmable balanced ringing up to 90 VPK, DTMF detection and generation, SPI control, and an integrated BJT/inductor DC-DC converter. Use it when an external codec and MCU can handle the digital voice path. Do not substitute the Si3230-E-FTR packaging code as a functional alternative merely because it appears in search results, and do not assume the Si3230-E-FM suffix is pin-compatible. If the product is obsolete and recurring supply is essential, the SI3010-FSR host-side SIP interface may be a better architectural choice for a new network-connected design. MC14C88BP is useful when additional DTMF transceiver functions are required, but it does not replace the SI3230-E-FT subscriber-line front end.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Brand Skyworks Solutions
Number of Channels 1 channel
Supply Voltage Range 3.13 V to 5.25 V
Supply Current 88 mA
Power Dissipation 700 mW
Control Interface SPI
Maximum Balanced Ringing Voltage 90 VPK
Ringing Load 5 REN at 4 kft; 3 REN at 8 kft
Codec External codec required

Ana Farklılayıcılar

  • Combines subscriber-line and DC-DC functions in one device (karşılaştırma:MC14C88BP)
  • Provides programmable balanced line ringing (karşılaştırma:MC14C88BP)
  • Integrates the line-side DC-DC converter (karşılaştırma:Discrete SLIC implementations)

Tasarım Notları

Design the low-voltage supply for 3.13 V to 5.25 V and include the listed 88 mA supply current in the system budget. The integrated BJT/inductor DC-DC converter provides the elevated line-side bias, but its inductor and switching components still require correct layout. Follow the manufacturer recommended-application circuit for the converter inductor, feedback network, and capacitor types rather than substituting general-purpose parts without checking the datasheet guidance.

Keep the telephone-line network, protection components, and DC-DC converter power loop physically separate from sensitive logic and codec routing. The converter inductor can radiate magnetic and switching noise, so minimize the high-current loop and place filtering and line-protection components close to the connector entry. Use the pin-description and layout guidance in the Si3230 ProSLIC datasheet when assigning traces and ground returns.

Do not treat the 90 VPK ringing rating as permission to omit external line protection. Balance the line network correctly and respect the REN-versus-loop-length limits: 5 REN at 4 kft and 3 REN at 8 kft. Also avoid assuming that an ordering code with a different suffix is drop-in compatible, because the suffix may identify a different package or delivery configuration with different terminal assignments.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Yes
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Product listings identify the device as lead-free and indicate RoHS features. Formal declarations for the exact legacy package and sourcing condition should be confirmed during procurement.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

SI3230-E-FT datasheet SI3230-E-FT datasheet pdf SI3230-E-FT pinout SI3230-E-FT specifications Skyworks SI3230-E-FT SI3230-E-FT equivalent SI3230-E-FT drop-in replacement SI3230-E-FT cross reference SI3230-E-FT price SI3230-E-FT stock SI3230-E-FT lead time SI3230-E-FT analog telephone interface SI3230-E-FT ProSLIC SI3230-E-FT vs SI3010-FSR

İlgili Bileşenler ve Terimler

Skyworks Solutions Silicon Labs SI3230-E-FT SI3230 ProSLIC Subscriber Line Interface Circuit SLIC telecom interface IC analog telephone interface external codec DTMF decoder DTMF generation SPI interface BJT/inductor DC-DC converter integrated battery supply balanced ringing 90 VPK ringing voltage REN 4 kft loop 8 kft loop line interface network RoHS lead-free MC14C88BP SI3010-FSR
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle