SI3230-E-FT Single-Channel SLIC with DC-DC Converter | Skyworks
料号: SI3230-E-FT ✗ 停产SI3230-E-FT 概述
A Subscriber Line Interface Circuit, or SLIC, is the analog front-end category that connects a telephone line to a digital voice processor. In the system hierarchy, a SLIC is a telecom interface IC that performs line driving, line sensing, ring-voltage generation, and DTMF handling. The SI3230 ProSLIC places these functions into a single low-voltage CMOS device while using an external codec for the voice-processing path.
Key features include software-programmable internal balanced ringing up to 90 VPK, support for 5 REN at 4 kft or 3 REN at 8 kft, an integrated battery supply, a DTMF decoder, and a SPI interface for configuration and control. The BJT/inductor DC-DC converter provides the elevated line-side biasing required by analog telephone interfaces while the low-voltage core remains compatible with 3.13 V to 5.25 V system rails.
The SI3230-E-FT is designed for compact analog telephone interfaces when connected to an external codec. Its single-channel architecture suits one-line adapters, analog phones, terminal adapters, small PBX peripheral cards, and legacy voice gateways. The 90 VPK balanced ringing capability allows one device to generate the line voltage required by conventional analog handsets without a separate discrete ringer circuit.
When designing the line-side network, account for the relationship between REN, loop length, and ringing voltage. The published ringing limits of 5 REN at 4 kft and 3 REN at 8 kft mean that a long loop reduces the permissible load. External protection, filtering, and the line-interface network still require attention because the SLIC controls line-side generation but does not remove the need for overvoltage and surge protection.
This page combines the device functions, published operating limits, sourcing information, application fit, and verified manufacturer documentation in one engineering reference. It also distinguishes the functional role of the ProSLIC from that of a codec, a host-side SIP interface, or a discrete DTMF transceiver so that board designers can select the correct component for each block of a legacy voice design.
直接替换替代料: SI3230-E-FT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料SI3230-E-FT 最大额定值与电气特性
| Product Type | Single-channel ProSLIC with DTMF decoder and BJT/inductor DC-DC converter |
| Number of Channels | 1 channel |
| Supply Voltage Range | 3.13 V to 5.25 V |
| 电源电流 | 88 mA |
| Power Dissipation | 700 mW |
| Control Interface | SPI |
| Internal Balanced Ringing Voltage | 90 VPK maximum |
| Ringing Load at 4 kft | 5 REN |
| Ringing Load at 8 kft | 3 REN |
| DTMF Functions | DTMF detection and generation |
| Codec Connection | External codec required |
| DC-DC Converter Topology | BJT/inductor |
| Battery Supply | Integrated |
| Technology | Low-voltage CMOS |
| Lead-Free Status | Lead Free |
| RoHS Features | RoHS features indicated in the product listing |
| Device Description | Telecom interface IC for a complete analog telephone interface with an external codec |
SI3230-E-FT standard 引脚配置指南
SI3230-E-FT(standard 封装)的引脚配置。 该功率器件具有栅极、漏极和源极端子。对于无极性封装,请参阅制造商数据手册以了解确切的引脚 1 方向和封装尺寸细节。常见应用包括电源设计、电机驱动和负载开关。
暂无详细引脚数据: SI3230-E-FT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SI3230-E-FT 适用于 6 应用s: Analog Telephone Adapter, Single-Line PBX Peripheral Card, Legacy Voice Gateway, Analog Desk Phone Interface, Remote Terminal Equipment, Analog Fax or Telephony Terminal.
Analog Telephone Adapter
The SI3230-E-FT fits a single-line analog telephone adapter because it combines the line-side SLIC, DTMF handling, and a BJT/inductor DC-DC converter in one low-voltage CMOS device. Its 3.13 V to 5.25 V operating range supports conventional digital logic supplies, while the internal balanced ringing generator reaches 90 VPK for handset activation. The external codec remains responsible for voice conversion. Designers should size the line network and protection around the published limit of 5 REN at 4 kft and 3 REN at 8 kft.
推荐
Single-Line PBX Peripheral Card
A compact PBX peripheral card can use the SI3230-E-FT as the subscriber-line interface for one analog extension. The SPI interface allows a host controller to configure the software-programmable line behavior, and the integrated DC-DC converter supports the elevated line-side bias required by analog handsets. With one channel per device, a card that supports multiple lines can repeat the circuit rather than multiplexing telephone loops through a single SLIC.
推荐
Legacy Voice Gateway
The SI3230-E-FT is appropriate for a legacy voice gateway that must bridge a physical analog line to a digital voice subsystem. Its SLIC performs line termination and ringing, while an external codec handles the voice path. The 90 VPK balanced ring source and programmable internal behavior reduce the need for a separate line-interface controller. Gateways should still implement surge protection, proper line-network balancing, and fault supervision around the analog line interface.
推荐
Analog Desk Phone Interface
A desk-phone interface board can place the SI3230-E-FT beside an external codec to form a complete analog handset connection. The device handles the physical line, DTMF detection and generation, ringing generation, and line-side voltage conversion without requiring separate discrete subscriber-line circuitry. Its single-channel structure matches a one-handset design, and the SPI control path allows operating parameters to be loaded by the telephone controller during initialization.
推荐
Remote Terminal Equipment
The SI3230-E-FT can support remote terminal equipment that terminates an analog subscriber line over copper. Its integrated BJT/inductor DC-DC converter develops the line-side bias while the low-voltage CMOS core operates from 3.13 V to 5.25 V. Software-programmable balanced ringing up to 90 VPK allows the unit to drive a conventional analog handset. Deployment near a network boundary requires the usual line protection and isolation appropriate to external copper interfaces.
推荐
Analog Fax or Telephony Terminal
The SI3230-E-FT is suitable for a dedicated analog fax or telephony terminal that needs a complete subscriber-line interface rather than only a codec. It provides DTMF detection and generation, balanced ringing, integrated battery supply, and a BJT/inductor DC-DC converter around one analog line. Since the device has a single channel, multi-line terminal designs require one SI3230 circuit per line. The 88 mA listed supply current should be included in the terminal's overall power budget.
推荐
工程参考数据: SI3230-E-FT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Skyworks Solutions |
| Number of Channels | 1 channel |
| Supply Voltage Range | 3.13 V to 5.25 V |
| Supply Current | 88 mA |
| Power Dissipation | 700 mW |
| Control Interface | SPI |
| Maximum Balanced Ringing Voltage | 90 VPK |
| Ringing Load | 5 REN at 4 kft; 3 REN at 8 kft |
| Codec | External codec required |
关键差异点
- Combines subscriber-line and DC-DC functions in one device (对比 MC14C88BP)
- Provides programmable balanced line ringing (对比 MC14C88BP)
- Integrates the line-side DC-DC converter (对比 Discrete SLIC implementations)
设计说明
Design the low-voltage supply for 3.13 V to 5.25 V and include the listed 88 mA supply current in the system budget. The integrated BJT/inductor DC-DC converter provides the elevated line-side bias, but its inductor and switching components still require correct layout. Follow the manufacturer recommended-application circuit for the converter inductor, feedback network, and capacitor types rather than substituting general-purpose parts without checking the datasheet guidance.
Keep the telephone-line network, protection components, and DC-DC converter power loop physically separate from sensitive logic and codec routing. The converter inductor can radiate magnetic and switching noise, so minimize the high-current loop and place filtering and line-protection components close to the connector entry. Use the pin-description and layout guidance in the Si3230 ProSLIC datasheet when assigning traces and ground returns.
Do not treat the 90 VPK ringing rating as permission to omit external line protection. Balance the line network correctly and respect the REN-versus-loop-length limits: 5 REN at 4 kft and 3 REN at 8 kft. Also avoid assuming that an ordering code with a different suffix is drop-in compatible, because the suffix may identify a different package or delivery configuration with different terminal assignments.
合规信息
Product listings identify the device as lead-free and indicate RoHS features. Formal declarations for the exact legacy package and sourcing condition should be confirmed during procurement.